How to clean white fur at home? How to clean fur and return it to its original appearance

Methods for cleaning fur coats at home.

After a long winter fur They are placed in the closet for a long time, where they will hang until the next season. That is why after wearing, before hanging your favorite item for storage, it is worth cleaning it. We will tell you how to do this further.

There are many ways to clean fur products. Of course, the easiest option is to take your fur coat to the dry cleaner. But this is quite expensive and this way you can ruin the product.

Methods for cleaning fur:

Lemon juice. To do this, dilute lemon juice and water in a bowl in a ratio of 1:10. After this, the product is wiped with a sponge soaked in the solution. After this, the product is dried and the fur is combed out.
Knocking out. This is a method that will help remove dust. To do this, the product is wrapped in a white sheet with the pile down and knocked out.
Starch. Starch is applied to the product. After the fur coat hangs for a day, the flour is combed out. Immediately in the direction of hair growth, and then against it.

Nowadays, fur cleaner can be purchased at any household chemical store. These are basically sprays that are very convenient to apply to the fur. After this, the product is applied and left for a few minutes to absorb. Next, the fur is combed out. These products mainly contain essential oils and animal fats. They restore shine and make products beautiful.

Review of fur cleaning products:

INSAF. One of the most popular remedies. It prevents the appearance of tangles and the undercoat becoming tangled. Quickly copes with grease and fat.
LIVAL LICKER KONZ. Allows you to quickly put your fur coat in order. There are substances with a tinting effect. Contains plant essential oils that add shine.
FUR FRESH SALAMANDER. A popular product that can be used to restore shine to a product and get rid of tangles. Tints the pile.
TERRE DE SOMMIERES POWDER. This substance is best used for targeted cleaning. This is a powder that will help get rid of stains. It is rubbed into the fur and then shaken off.
ULTRA FINISH MILK. The substance is intended for cleaning fur products of any color. Returns shine and prevents fibers from sticking together.

How to clean a mink coat after winter with alcohol or champagne vodka?

This product is more suitable for cleaning dark fur items. The procedure is quite simple. It is necessary to mix vinegar, vodka and water in equal quantities. After this, a towel or soft brush is soaked in liquid and applied to the product in the direction of hair growth. Next, the product is dried and combed again. This allows you to remove excess fat and add shine to the product.

Cleaning a mink coat with talcum powder to prevent vomiting

Talc is an excellent fur cleaner. Its action is based on adsorption abilities. This substance is ideal for removing grease and adding shine.

Instructions:

Remove vomit with a damp cloth
Lay the product on the floor and sprinkle dirty and greasy areas with talcum powder
Rub the powder clockwise, shake off the talc little by little
After this, add a new portion and rub again
Rinse out the talc and shake the product well.

Cleaning a mink coat with ammonia from milk

There are two ways to clean products with ammonia:

Alcohol and ammonia. Substances are mixed in equal quantities. The resulting liquid is moistened with a sponge and applied to the fur. Next, the product is dried and combed.
Ammonia, salt and water. It is necessary to add 40 ml of ammonia and 20 g of salt to 500 ml of water. After this, the mixture is shaken and applied to the fur. After this, the product is dried and combed.

This is one of the simplest and most affordable options.

Instructions:

Introduce a spoonful of shampoo into warm water and beat until foam forms
Apply a little foam to the sponge and in a circular motion rub into fur
Hang the product on a hanger and wipe with a damp cloth
Let dry and brush the product with a brush

Cleaning a mink coat with hydrogen peroxide

This option is more suitable for cleaning white fur coats, since dark fur may cause light spots. You can learn more about cleaning with peroxide in the video.

VIDEO: Cleaning a fur coat with hydrogen peroxide

Cleaning a mink coat with gasoline vinegar

The product is suitable for cleaning dark and light fur.

Instructions:

Apply vinegar to the swab and wipe the product in the direction of lint growth.
Hang on a hanger and let dry
After this, the cotton wool is soaked in glycerin and the entire pile is also wiped
Hang the product on the balcony and let it air out
Comb with a comb

Using semolina will not only remove dirt, but also give the product shine. To clean the fur, sprinkle it with grain. After this, you need to rub the product a little, as during washing. After this, carefully shake off the fur and comb it with a soft brush.

Is it possible and how to clean a mink coat with flour?

About how to clean mink coat flour, you can watch in the video.

VIDEO: Cleaning a fur coat with flour

The main task of caring for a mink coat is to give it shine. To do this, you can use a mixture of lard, water and ammonia.

Instructions:

Dissolve 100 g of rendered pork fat in a liter of boiling water.
Add 2 ml of ammonia and shake the mixture
Pour it into a spray bottle and shake the bottle several times
Apply the solution to the entire fur coat and hang the product on the balcony
Let the product dry and comb it

One of the most the best ways Cleaning white fur coats is hydrogen peroxide or sawdust with gasoline.

Instructions:

Pour purified gasoline over the sawdust and squeeze it out
Lay the fur coat on the table and sprinkle it with wet sawdust
Leave until the sawdust is completely dry, shake off the product
Carefully remove any remaining cleaning product with a brush.

How and with what to clean a sheared mink coat?

Cleaning a sheared mink is quite simple. More details in the video.

VIDEO: Cleaning a sheared mink

How to clean or wash the lining of a mink coat to remove dirt?

If there is little dirt, then the product is dried, and then the dry dirt is cleaned with a brush.

There are two options for cleaning the lining:

Rip off the lining. After this, the lining is machine washed for delicate mode washing. After drying, the fabric is ironed and sewn back onto the fur coat.
No steaming. In this case, there is no need to steam the lining. Prepare a soap solution and apply it to the lining. Try not to let the inner layer of the fur coat become wet. After this, rinse everything off with a damp cloth and pat dry with a clean, white towel. Hang on hangers and let dry.

There are many rules for caring for a mink coat.

What not to do:

Wash a fur coat by completely immersing it in water
Dry near radiators or fireplaces
Use an iron or hair dryer to dry
Light fur coats should not be cleaned with tea leaves
Dark fur should not be cleaned with hydrogen peroxide.

As you can see, cleaning a fur coat made from natural fur is quite simple. All it takes is a little time and patience.

VIDEO: Cleaning a fur coat at home

If fur hat, a fur coat or vest has become stained and shiny over time, you need to clean it + this can be done at home. In addition, it is recommended to clean fur products at the end of the season before storing them. The cleaning method will depend on whether the item is made from natural or faux fur. Natural fur coats made from mink, chinchilla, fox, arctic fox, etc. They are not cheap, so special care should be taken when cleaning. Clean artificial fur somewhat easier. But when choosing cleaning products, you will have to take into account the color of the product.

Show all

Methods for cleaning natural fur

Products made from natural fur are more expensive and require special care. In order not to spoil your favorite fur coat, you must use only proven cleaning products.

When choosing a cleaning composition, you must take into account what kind of fur the product is made of. A fur coat or vest can be made from mink, arctic fox, rabbit, chinchilla, etc.

Arctic fox

Arctic fox fur is a fairly common material for making fur coats, hats and other wardrobe items. It can be cleaned with hair shampoo. To do this you need:

pour shampoo into a container and dilute it with a small amount of water;
moisten a lint-free cloth in the resulting mixture;
wipe the entire surface of the product or treat it with a spray bottle, pouring the prepared solution into it;
After cleaning, wipe the fur in the direction of the pile with a clean, dry cloth or paper napkins.

It is advisable to take shampoo designed for cleansing the hair of pets (cats or dogs). It acts more delicately than usual. Instead of shampoo, you can use liquid detergent, intended for wool or silk.

In addition, you can restore the original shine and cleanliness of an arctic fox fur coat by using ammonia. You will need:

mix 500 ml of warm water and 1 teaspoon of ammonia;
wet a dish sponge with the resulting solution and wring it out;
process the fur, moving along the pile;
then you can additionally walk over the product with your hands, evenly distributing the cleaning composition;
after 5 minutes, take a clean, damp sponge or cloth and wipe off the remaining solution from the pile;
After this, the surface should be wiped with paper towels or napkins.

You cannot wet the fur too much, otherwise it will lose its presentable appearance. Therefore, the sponge must be wrung out well.

The length of the fur fibers of the Arctic fox is considered quite long. Therefore, after drying, you need to carefully comb the pile with your hands or a fine-toothed comb.

The listed cleaning methods are also suitable for products made from fox (silver fox) fur.

Mink

Products made from mink fur are no less in demand. To clean such a fur coat or hat, you can use this method:

mix 9% vinegar, alcohol and water in equal parts;
distribute the composition evenly over the pile using a sponge or soft brush for cleaning clothes;
then wipe the fur dry.

If after using these products a specific odor remains on the product, you can hang it in fresh air.

Sometimes an unpleasant shine appears on a mink coat. You can remove it this way:

to 500 ml of water add 1 tablespoon of ammonia and 3 tablespoons of table salt;
Apply the mixture to shiny areas, moistening cotton pad;
after 5–10 minutes, wipe the area with a clean sponge slightly moistened with water;
then remove any remaining moisture with a dry cloth.

After this, the product should be hung on hangers in a well-ventilated area and wait until it dries completely. In this case, it is necessary to ensure that straight lines do not fall on it. Sun rays. Otherwise, the pile will become brittle, dull and lose its properties. In addition, you cannot speed up the drying process by using batteries, electric dryers and other sources of hot air.

Rabbit or muton

Rabbit fur is less difficult to care for. Therefore, you can use all of the above methods to clean it.

In addition, you can clean a rabbit or muton fur coat using bran.

Procedure steps:

walk over the surface of the product with a slightly damp sponge;
pour the bran into a container;
warm them up a little in the microwave and pour them onto contaminated areas;
rub the lint with your hands;
When the bran has cooled and dried, you should carefully brush it off with a brush.

If your rabbit fur coat or vest is covered in dust, you can knock it out with a regular carpet beater.

Algorithm of actions:

take an unnecessary but clean sheet;
moisten it with water and squeeze;
wrap the product in a sheet;
knock out the dust with a beater.

As a result, dust and dirt will remain on the damp fabric, and the fur will become clean and shiny again. This method is also used to clean mouton fur coats from dust.

You cannot knock the product too hard, otherwise you can damage it, but the force of the blows must be sufficient so that all the dust transfers to the sheet.

The fur of a goat, nutria, wolf and raccoon is similar to rabbit fur. Therefore, you can clean them in the same way.

Chinchilla, otter

Clean natural fur chinchillas, otters or muskrats can be sanded. After all, these animals clean their skin in this way in their usual environment.

Instructions:

take clean river sand, which can be purchased at a hardware store or from construction companies;
pour it into a container and heat it in the microwave;
pour hot sand onto problem areas, laying the fur product on a flat surface;
lightly rub it into the pile;
After cooling, the sand must be shaken off.

If the dirt is not removed immediately, the procedure can be repeated several more times.

How to clean faux fur?

Not everyone, due to personal beliefs or limited funds, can afford to wear products made from natural fur. The way out of this situation is to buy a faux fur coat. Products made from this material are now very difficult to distinguish from natural ones, but at the same time they are much cheaper.

In order for such things to last a long time and always remain in good condition, you need to properly care for them. To do this, it is worth promptly cleaning the faux fur from dirt and emerging stains.

Machine washable

A small faux fur coat can be washed in washing machine.But you must follow these rules:

remove all contents from pockets and fasten them;
if the product has decorative elements(buttons, rivets, etc.), then it is advisable to turn it inside out;
spin should be turned off;
You must select a delicate program suitable for washing wool or silk.

Such fur coats are dried in the same way as products made from natural fur.

Washing powder

If individual spots appear on artificial fur, you can remove them in this way:

do not dissolve a large number of washing powder in warm water;
treat contaminated areas with the prepared solution using a cotton pad;
After cleansing, wash off the soap film with a damp sponge.

Powder with bleaching properties can only be used if the fur is light. This use will leave stains on dark or colored pile.

Starch

Regular dishwashing detergent and starch will help clean faux fur from greasy stains.

Sequencing:

mix dishwashing liquid with starch to the consistency of liquid sour cream;
apply the resulting mixture to the stain;
wait for the composition to dry and clean it with an old toothbrush or a clothes brush;
wipe the lint with a damp cloth.

Dishwashing detergent effectively fights grease, and starch quickly absorbs it.

Glycerol

Old stains can be removed using glycerin and alcohol.

Cleaning steps:

mix 500 ml of water and medical alcohol in a container;
add 2 teaspoons of glycerin there;
mix the composition thoroughly and moisten a cotton pad with it;
rub contaminated areas;
then rinse the fur with a damp cloth and wipe with a dry cloth.

If the smell of alcohol remains on the product after this, you can wipe the cleaned area soap solution.

Refined gasoline

If fur of unnatural origin begins to become shiny over time, you can use purified gasoline, which is poured into lighters. Under no circumstances should you use the regular one. Otherwise, an indelible greasy stain will remain on the fabric.

Mode of application:

apply a little purified gasoline to a rag or cotton pad;
treat problem areas;
Rinse off the substance immediately by wiping the fur with a clean, damp cloth.

If after this there is a gasoline stain or an unpleasant odor left on the product, you need to prepare a special solution. To do this, add 1 tablespoon of citric acid to a glass of warm water or squeeze the juice of half a fresh lemon.

Using the same method, you can get rid of gloss on your pockets or collar.

Sawdust

Sawdust can also help clean faux fur. To remove even old contaminants, they are mixed with purified gasoline. You will need:

pour sawdust into a container and pour a little purified gasoline into it;
leave for several hours so that they are thoroughly soaked;
rub the villi with the resulting mixture;
After 5–10 minutes, shake off the sawdust with a brush and thoroughly wipe the fur with a clean, damp cloth.

Afterwards the product is left on fresh air so that the smell of gasoline disappears.

Cleaning light fur

Fur requires more careful care light shades. You will have to clean it more often, since all the dirt on such material is more noticeable.

In addition, over time, the once snow-white fur turns yellow. Therefore, you will need to use substances with bleaching properties.

Soda and alcohol

You can bleach yellowed fur at home using this method:

mix 600 g of medical alcohol and 200 g of baking soda;
moisten the sponge with the resulting solution and wipe the villi;
After cleaning, rinse off the composition with a clean damp cloth.

Under no circumstances should this method be used to remove stains from dark or colored fur. Otherwise, the pile will fade and streaks will remain on it.

If the fur is only present on a small area of the jacket or sheepskin coat, care should be taken to ensure that the peroxide does not get onto the main part of the garment. The sheepskin coat itself is cleaned from dirt with a special brush for suede and nubuck.

Hydrogen peroxide

Perhaps the most well-known means for self-bleaching various fabrics and materials is hydrogen peroxide. To restore the whiteness of natural or faux fur using this substance, you must:

combine peroxide with water in equal proportions;
pour the prepared composition into a spray bottle;
treat the fur by spraying the solution;
wait for the product to dry and carefully comb the pile with a fine-toothed comb.

If the fur is covered with an old yellow coating, you can enhance this recipe by adding a little ammonia to the mixture. To get rid of the smell after cleaning, you will need to hang the product on hangers and leave it in the fresh air.

Semolina

A gentle way to clean white fur is to use semolina.

Algorithm:

heat the semolina in the microwave or in a frying pan without oil;
pour it onto the product and rub it, making movements as if washing by hand;
when the yellowness disappears, you need to clean off the remaining grain with a brush;
At the end, the fur coat should be shaken thoroughly.

It is important not to use excessive force when cleaning, otherwise you may damage the fibers.

Instead of semolina, you can use other bulk substances: flour or starch.

Restore appearance you can wear your favorite fur coat using improvised means. In order not to spoil the item, you must act carefully and test cleaning compounds on an inconspicuous area before use.

Hello, my dear readers.

It's time to put on warm fur coats. If the fur coat was stored incorrectly, its appearance will not be very attractive. The fur became dull over the summer, became wrinkled in many places, and even felt matted in some places. What to do? How to refresh fur, how to return it to it attractive appearance. If the fur has not been damaged by moths, then it is not difficult to restore it. Allow me, dear readers of the blog “Secrets of the Brownie,” to give you some tips on how to clean fur at home, using folk and special means.

Before cleaning your fur coat, you need to get rid of dust. To do this, place the fur coat on the sofa on a damp sheet and knock it out with a clapper. Fur items cannot be cleaned with a vacuum cleaner.

Heavy sweat discharge (on the collar, at the bottom of the sleeves) will disappear if you spray the fur with a solution of 200 ml. water, 3 teaspoons of salt and 1 teaspoon of ammonia.

Grease stains on small items (hat, collar) are removed with a clean cloth, soaked in gasoline. Old and fresh spots removed in different ways. Old stains are rubbed against the grain, while fresh stains are wiped against the grain. Be sure to let the product dry and then comb it with a metal comb.

This method is only suitable for products made from natural fur. Faux fur, in particular faux astrakhan fur, cannot be wiped with gasoline.

The following composition will remove yellowness from white fur clothing: 200 ml. water - one teaspoon each of ammonia and a pharmaceutical solution of hydrogen peroxide.

How to restore the shine of fur

To restore the shine of the pile, pour it into a spray bottle vinegar essence, diluted with water 1:1. Lightly spray the fur.

If the pile is long, then apply the product along its growth.

Process short fur in reverse side.

After the procedure, the fur should not be wet (only slightly damp). Avoid getting the solution on the skin.

Walnuts will help add shine to fur and prevent brittleness.

Grind the walnut kernels to a powder, put the powder in gauze, folded several times, and wipe the fur with it along the pile. Walnut oil will give the fur a beautiful, lasting shine.

If you wipe the fur with a cloth soaked in glycerin, the shine will also be restored.

How to clean fur after rain or snow

Fur items exposed to rain or snow should be cracked and cleaned, lint by lint, with a brush lightly moistened with alcohol or vodka. To dry, hang the fur coat away from the heat source - rapid drying of the fur makes the pile and the fur itself brittle.

How to straighten wrinkled or matted fur

You can straighten wrinkled fur by holding it over steam from a kettle at a height of 15-20 centimeters. After steaming, dry the item at room temperature away from heating devices.

Felted fur can be sprinkled with potato starch, semolina or bran heated in a frying pan to 60 degrees. And run your fingers through the fur until the lumps of fur are straightened out. Then shake the item over the bathtub and comb it with a soft brush.

How to clean fur with special products

There are many special products for cleaning fur: fur aerosol, stain remover powder, special professional environment childhood You will learn how to clean a fur coat with this product at home by watching this video.

Such simple ways will help clean the fur on your fur coat. Now you know how to clean fur and it will be easy for you to solve this problem.

Sincerely, Nadezhda Karacheva

Tips for caring for fur. How to properly clean its different types at home. How to preserve the shine and silkiness of fur, protect it from moths and deformation. Features of cleaning, washing and storage.

Spring brings with it not only bright warm sun and birdsong, but also new worries. For example, it is necessary to properly prepare and store fur items that will definitely no longer be useful to you in the coming warm days. And, of course, it is very important to thoroughly clean them first and remove stains. Many people decide to simply give their favorite fur coat to the hands of professionals - dry cleaning. But this service is not cheap, and you don’t always want to trust your personal belongings to strangers. Still, only their owner will handle fur products with the most care and attention. In fact, it’s enough just to clean the fur and remove stains from it at home using special products or folk recipes. More about them below.

First you need to find out whether the fur needs cleaning. The most ordinary hairdryer will help with this. It is enough to direct a stream of cool air onto the villi to determine their degree of contamination. So, if the pile flies away easily, shines and looks attractive, then the fur is not dirty and additional procedures does not need cleaning. If a stream of air does not blow out the villi, the fur does not shine and does not fly away, this means that a large amount of dirt has settled on it over the winter and cleaning is simply necessary.

Cleaning natural white fur

To begin with, it is worth noting that products made from light fur are the most capricious and short-lived. They get dirty and turn yellow the fastest. But it is quite difficult to clean them properly. When purchasing products made from white fur, you should immediately take into account its tenderness and susceptibility to various kinds contamination, and therefore wear them very carefully. It is accuracy in this case that will protect the owner of the fur coat from most problems.

Clean white fur at home you can use hydrogen peroxide, which is sold in every pharmacy. 3% is best. Peroxide must be diluted plain water in a 1/1 ratio, and then pour the resulting product into a spray bottle. As soon as the fur is ready for cleaning, it must be thoroughly sprayed with the resulting mixture, wait until it dries, comb and shake.

White fur requires special care

You can also use shampoo for dogs or cats for this purpose, which is sold in any pet store. This product will help rid white fur not only of dirt, but also of yellowness. To do this, you need to dilute the shampoo in warm water, moisten a rag from the resulting solution. natural fabric and process all the fur in the direction of its growth. After processing, you will need to carefully wipe the product paper towel, then dry, comb and fluff with your fingers.

You can also use semolina, wheat flour and potato starch to clean the white coat. Moreover, these products, as a rule, are always on hand for every housewife. For the product to be most effective, flour, cereal or starch must be preheated in a dry frying pan to approximately 70 degrees. The main thing is that the food does not burn, otherwise the fur may become very stained.

Cleaning natural fur of other colors

Fur of any other color with long pile can be cleaned of dirt with regular table salt. This is a very convenient way to clean at home. To do this, you need to sprinkle the fur with fine salt, and then walk over it with a brush. If the contamination is very serious, then it is better to use a solution of salt and ammonia. It is prepared very simply - salt and ammonia Mix in proportions of 1/3 in warm water. Next, a brush is dipped into the resulting liquid to clean the dirty fur.

Colored fur can be cleaned with table salt

Rye bran, preheated in a frying pan, will also help clean dark fur pile. They need to be scattered throughout the fur product. even layer, rubbing lightly, and then leave it for a couple of hours. After the time has passed, you need to shake the fur coat and clean the fur with a brush.

You can also use preheated sand for this purpose. The fur coat will need to be laid out on a flat horizontal surface, sprinkled with sand on top and lightly rubbed into the pile with your hands. Then the dirt must be shaken off and, if necessary, the procedure must be repeated until the sand is perfectly clean.

Cleaning faux fur

Faux fur needs cleaning no less than natural fur. Therefore, putting it away in the closet before next winter, you should also take care of the cleanliness of such fur.

You can easily clean it using ordinary soap. Add a piece of soap to warm water or liquid product, and lightly beat the solution until foam forms. After this, you need to moisten a foam sponge in the resulting product and treat the contaminated areas of the pile with it. Once the fur is clean, the soap can be easily washed off with a clean, damp cloth. After this, the product must be thoroughly dried and combed with a blunt-toothed comb.

But under no circumstances should acetone and acetic acid be used to clean faux fur from dirt.

How to remove stains from fur?

Most big problem When cleaning products made from natural fur, stains appear. Getting rid of them is not so easy, but they can significantly spoil the appearance of a fur coat.

Stains from fur of any shade can be removed at home, for example, by mixing ammonia and denatured alcohol in equal proportions. Wipe the fur thoroughly with this mixture, then blot it with a clean towel and shake it out in the fresh air.

A stain on a fur item is not a problem

And gasoline and starch will help get rid of stains on light fur. For cleaning like this an unusual means you need to mix potato or corn starch with refined gasoline. The result should be a paste-like substance of uniform consistency, which is applied to the contaminated areas. Then this area must be carefully rubbed with a sponge or brush, after which the odorous mixture is cleaned from the fur. To prevent the fur coat from retaining the unpleasant smell of gasoline, immediately after cleaning it should be hung in fresh air.

To remove stains from faux fur, you can mix potato starch with dishwashing liquid. The finished product is to apply to the stains, wait until dry, and then clean them off with a brush.

You can also remove stains by wiping them with a cotton swab dipped in gasoline. Or use any means to remove stains from carpets and furniture upholstery. In this case, cleaning must be carried out according to the instructions that come with the selected product.

Can real fur be washed?

Products made from natural fur are strictly prohibited from washing. Otherwise, they may fade and lose their attractiveness, and the pile will become brittle and tangled.

And, in addition, shrinkage of the fur product may occur. However, their size can change very significantly.

But faux fur can be washed in a machine, choosing a delicate cycle. But this is only possible if the basis for the pile is a synthetic base, and not cotton.

After washing is completed, the product must be laid out to dry on a flat surface. Shortly before the pile dries completely, it should be carefully combed to prevent the appearance of lumps. But still, if possible, it is better to avoid washing even faux fur in favor of cleaning it.

How to make fur shiny?

Fur looks very beautiful when it is not only clean, but also shiny. To restore the shine of fur products, you can treat the pile lemon juice, weak solution acetic acid or glycerin. It is better to apply any of these products to the product from a spray bottle, and then thoroughly wipe the fur with a paper napkin.

Fish oil helps make your fur coat shiny. For getting special means you need to mix 100 grams fish oil, 10 grams laundry soap, 10 drops of ammonia, 1 liter of boiling water. While the water is hot, all of the listed ingredients must be thoroughly mixed, and then cool the finished solution until room temperature, apply to a sponge and process the fur.

Shiny fur looks more beautiful

If the product has lost its shine only because it has become dusty, then a damp sheet will help save it from dust. To do this, the fur coat needs to be wrapped in cloth and then lightly knocked out.

If the fur is dark, then it can be rubbed into powder. walnuts. To prevent the powder from scattering throughout the product, it must be wrapped in gauze, folded several times. The result will be a kind of swab with which you need to wipe the fur coat.

A special spray paint for suede helps to improve the appearance of fur products. It is especially convenient for tinting the ends of long piles. When spraying paint, keep the can at a distance of about 70 centimeters. After a certain area has been painted, it must be combed immediately. This will remove excess paint and separate the stuck together fibers. In order for the color to adhere well, the can must be moved slowly and evenly.

Some brave souls dye their fur coats regular paint for hair suitable color. But this method is very risky. You can never know for sure how the paint will behave on a particular product.

Rules for storing fur items

So, when the fur coat is put in order after a long winter and cleaned of all kinds of dirt, it’s time to carefully pack it for storage. summer period. How long this product will serve its owner and its appearance next winter depends on how correctly this is done.

It is best to dry your fur coat in the fresh air before packing it. The main thing is that it hangs in the shade and not in the sun. As soon as the fur product has dried thoroughly, it will need to be carefully knocked out.

As for the place to store fur coats, it is best to choose a shelf in the closet, where there is no direct sunlight, and where there are no radiators, pipes or any heating devices nearby. The room should have moderate humidity and low temperature. Fur needs to “breathe” and at the same time it cannot lie close to other items of clothing.

There is one secret how to protect white fur from yellowing during storage. To do this, you need to choose a case for the product. of blue color. It has long been believed that it is blue fabric that allows light fur maintain its brightness for a long time. You can, for example, sew a cover for your fur coat from blue material.

It is also important to ensure that the fur does not absorb any unpleasant odors. Therefore, it is not advisable to smoke, use essential oils or other products with a strong odor near the place where fur coats are stored.

Also, before storing fur products in the closet until next winter, you need to protect them from exposure to moths. You should not use naphthalene for this purpose. It is better to seek help from more effective, safe and pleasant-smelling products. For example, use tobacco (leaves), citrus peels or geranium leaves. And, of course, in modern stores you can buy the most different means from moths.

By the way, for the same purpose you can use essential oil sweet orange. By adding tampons soaked in this product instead of storing a fur coat, you will not only protect your fur products from moths, but also imbue them with a pleasant aroma.

Proper cleaning and storage of fur coats and other fur products will keep them in excellent condition until next winter. Thanks to such careful care, fur coats, hats, vests and other outfits will serve their owner faithfully for a long time. for long years, will decorate it and warm it in the most severe frosts.

Before processing fur products, you need to carefully inspect them. If you see dust or dirty stains, you don’t have to send the item to the dry cleaner - you can deal with them at home. To avoid damaging your clothes, you need to take into account the nature of the contamination:

During storage, the fur coat may be attacked by moths. It is impossible to correct traces of its vital activity, so clothes with fur trim should be stored together with specialized anti-moth products.
Loss of color is typical for light-colored products.
A discolored spot can appear if you handle perfume carelessly. You will not be able to get rid of such pollution on your own.
There are traces of dye on the fur - this is possible if you constantly wear a bag made from natural suede– she instantly gives away her paint.
Deformation of the product and its base - the cause is drying using heating devices.

Fur products can be cleaned at home

To avoid wondering how to clean fur at home, store clothes in fabric covers in a dry and dark place. Do not spray it with perfumed liquid, and after each season, be sure to wash things. Fur trim at the same time it is removed and cleaned with a brush. When cleaning, consider the length of the pile. If it is short, apply the cleaning compound against the grain, and if it is long, apply it in the opposite direction. reverse direction.

Cleaning Methods

Real fur requires more careful care, as opposed to artificial. Regular cleaning will help maintain its attractiveness and prevent minor damage. How to effectively clean natural fur at home? Many housewives believe that it is better to give such clothes to specialists who will competently carry out all the necessary work. But there are also effective home methods.

The main problem with white clothes is the change in shade. Yellowness appears as a result of improper storage or careless wear. There are several options:

Potato starch - sprinkle it on the item and dry process it: use your hands in the same movements as during standard washing. The duration of the procedure is no more than ten minutes. Then sweep away the starch and comb out any remaining residue with a soft-bristled brush. This cleaning method can be used for both colored and light-colored items.
Mix hydrogen peroxide and ammonia, pour into a spray bottle and spray on the fur. After treatment, dry clothes at room temperature.
Purified is an excellent product for eliminating greasy marks.
Mix ammonia and vinegar with water. Treat the pile with the resulting mixture, then cover it with a cloth that absorbs moisture well. Afterwards, dry and comb the fur.

Real fur can be cleaned in several ways

Faux fur products are very popular. They also require proper care. To make such things, cotton or synthetic fiber is used, so they need to be kept in cases with moth-killing products. To clean fur at home, you will need glycerin, alcohol and water. The composition prepared from these components is suitable for unpainted products.

Faux fur can be cleaned using glycerin, alcohol and water.

If the fur is very dirty, you can wash it in the machine on a delicate cycle, turning off the spin cycle. After the procedure, remove excess water with a dry cloth and dry it by placing it in vertical position. Faux fur takes a long time to dry, so it is better to place it on a balcony or other ventilated place.

One of the most current issues– how to clean faux fur white. Chalk, talc, powder will help get rid of dirt, semolina or starch. Pour in the chosen product so that it absorbs all the dirt. Additionally, the substances will polish the hairs and return them to their former shine. To clean rabbit fur, you can use oatmeal or rye flour. Gently rub the cereal into the pile, then shake the clothes and remove the remaining residue with a brush. Grey colour flour - obvious signs severe contamination of the item. If necessary, perform all steps again.

White fur coats are cleaned with chalk, talc or starch.

To return your clothes to their dazzling whiteness, use a solution of ammonia and hydrogen peroxide. Spray the fur and dry it in the sun, but not longer than a day.

Sometimes fur products may remain ink stains. Gasoline mixed with starch to a liquid consistency will help remove them. Apply the product to the stain and wait until it dries. Then comb the fur with a brush. Will cope with oil marks sunflower oil. Soak a cotton pad in it and wipe the problem area.

Stains can be removed with gasoline and starch.

To remove old stains use chemical substances. Small stains can be treated with acetone, turpentine or solvent. Be sure to clean them after Right place water, adding soda to it, wipe with a dry towel and dry.

If there are signs on a fur product greasy spots or shiny areas, gasoline will help remove them. Wet the sponge and rub the problem areas. Fresh dirt can be easily removed with gentle movements along the pile, while old dirt can be removed in the opposite direction. To enhance the effect, gasoline can be mixed with washing powder. If you want to comb the pile, use a brush instead of a sponge. Clean in a ventilated area, away from sources of fire.

Ammonia

Light fur turns yellow after treatment with gasoline, so salt and ammonia, as well as any product intended for animal hair, are more suitable for it. Beat the mixture until a thick foam is obtained and thoroughly process the product. Finally, wipe the fur with a sponge moistened with clean water.

Place the contaminated product on a horizontal surface.
Test any cleaning product on an invisible area first.
Fur and especially the flesh should not be wetted - this will cause the clothes to become deformed and become rougher.
Do not rub the pile too hard, otherwise you may damage the base.
After treatment, the item should be air dried, but not in the sun. Do not use hair dryers or heating devices for drying.
There is no need to comb the astrakhan fur; after cleaning, shake it and ventilate well.
Vinegar and acetone are not suitable for artificial products. Also prohibited aggressive means designed to remove rust.
Care fur things must be comprehensive. Their base may crack and tear over time. To prevent this, regularly lubricate your skin with vegetable oil.

All of the above cleaning methods are effective, but require careful use. If clothes are heavily soiled, it is better not to take risks, but to have them dry cleaned.