How to safely clean fur at home. Simple remedies and tips on how to easily clean fur at home. Features of cleaning mink coats of different colors at home

Are you wondering how to clean a mink coat at home? Right now you will learn how to do it quickly, efficiently and, most importantly, without damaging the fur.

Is cleaning necessary?

First of all, you need to decide whether your fur coat needs cleaning. Of course, if you got it dirty in a vehicle or the fur got splashed from under the wheels of a car, the need to eliminate the dirt is obvious.

If you are thinking about cleaning your fur from accumulated dust and possible grease, we recommend that you use a regular hair dryer.

Direct the air stream at the fur coat at a distance of at least 40-50 centimeters. If the fur hairs fly away easily and freely and form a small open area in the center of the air flow, which disappears as soon as you remove the hairdryer, and the hairs fall back to their original place, then we can conclude: your product does not need cleaning.

In this case, it is better not to injure it and simply send it for storage.

If, under the air flow, the hairs remain motionless or become bunched up, your fur coat really needs proper cleaning.

Dry cleaning

First of all, it should be noted that there are two types of cleaning mink fur:

dry;
wet.

If you want to learn how to clean a mink coat at home, a video on dry cleaning will help you learn in detail the correct sequence of steps.

To remove dirt from a fur coat, all you need is a fur care brush with short metal bristles. First, the product must be thoroughly dried without the use of artificial heat sources.

It is enough to simply hang the fur coat on hangers of suitable size in a room at room temperature. When the stained area is dry, run the brush over it in the direction of hair growth several times, then shake the product.

The brush will remove dry dirt, and the cleaned fur will shine again.

Semolina

The method of cleaning mink products using semolina has proven itself to be excellent. It is suitable if the product has been worn long time and generally lost the original appearance, became dusty and lost its shine.

This is especially noticeable on the sleeves, in the collar area and pockets. Lay the fur coat on a flat surface and sprinkle semolina on the stained areas.

Light movements simulating the process hand wash, treat the required areas for 30–45 seconds.

Semolina will act as an excellent abrasive that will quickly remove dirt from fur. Finally, shake the product and go over it with a special brush, which we wrote about above.

Some people recommend using starch instead of semolina. If after the described manipulations the starch became darker, it means that the fur was really dirty and the cleaning procedure should be repeated once or several times until the starch remains snow-white.

Wet cleaning

Wet cleaning involves a more aggressive impact on the fur using a variety of liquid compositions.

One of the popular methods of cleaning mink fur is combing it with a brush dipped in gasoline. It should be noted that such manipulation is not recommended for very light fur, otherwise it will turn yellow.

You need to work the brush lightly, without pressing and without trying to completely wet the fur. It is very important to follow the necessary safety precautions, work in a room with open windows and away from the source of fire.

Peroxide

How to clean yellowness from a mink coat at home? There are several ways. The most effective are the use of hydrogen peroxide or vinegar.

Take a regular one cotton pad and a bottle of 5% hydrogen peroxide. Using a disc soaked in the solution, work the fur in the direction of hair growth.

You will see traces of dirt on the disc, and also notice how the cleaned fur will again shine and become snow-white. At the same time, do not forget to change the cotton pads.

Vinegar

How to clean a mink coat at home with vinegar? Very simple. Prepare a vinegar solution (no more than 5%) and follow the instructions for cleaning with hydrogen peroxide.

The most important thing is not to overdo it and not to wet the base of the fur. Treat the product without applying pressure; after soaking the cotton pad in the solution, squeeze it out.

You can spray the starch solution onto the fur surface using a spray bottle and let it dry. After this, remove the coating with a special brush for caring for fur products.

You bought an expensive fur coat, you bought fur vest or snatched a hat at the annual sale, but after a while the fur of the product became shiny and lost its shine and color? Well, it happens to everyone! But knowing how to clean fur at home, you can very quickly restore the presentation of your “fluffy wardrobe.”

Before starting work, decide on the type of fur, because each of them has its own cleaning methods. Let's talk about them in more detail!

Arctic fox and silver fox

Fur coats or vests made from Arctic foxes and silver foxes can be easily cleaned at home, if, of course, you stock up on any of the products described.

Method 1 – ammonia

Method 2 – hair shampoo

To thoroughly clean the natural fur of the Arctic fox, use your own shampoo. An alternative would be pet shampoo, wool and silk detergent, or pure gasoline.

Chinchilla, muskrat, otter

The animals themselves clean themselves with sand. So why don’t you and I use this method?

Mink

To clean mink fur, you can safely use the following recipes.

Method 1 – vinegar and alcohol

Method 2 – ammonia, gasoline, water

Combine 3 tbsp. l. salt, 0.5 liters of water and 1 tbsp. l. ammonia.
Treat the shiny parts with a swab.

Rabbit, goat, nutria and wolf

Rabbit fur will withstand any cleaning just fine. To restore your presentable appearance, choose any of these recipes.

Method 1 - alcohol and vinegar

Method 2 – bran (suitable for cleaning a white rabbit)

Method 3 – knock out the dust

How to clean white fur?

How to clean white fur from yellowness? Be very careful not to spoil the pile and natural shade. First, try the product on an inconspicuous area, and then move on to cleaning the surface of the fur coat. Good effect give:

Be sure to hang your fur item in a well-ventilated area to allow it to dry completely.

Important! If you spill wine, juice, sauce, coffee, tea on a fur coat, vest or sheepskin coat, take it to the dry cleaner! Don't take risks with a home remedy to avoid damaging your fur.

Artificial fur

Modern faux fur is made so beautifully that it cannot be distinguished from natural products. For “fox”, “raccoon”, “mink” - the cost of such products will be much cheaper. But this does not mean at all what faux fur no maintenance needed! Remember a couple of recipes that will help you clean it from dirt.

Method 1 - glycerin, alcohol and water

Method 2 – starch and dish liquid

Fill the starch with dishwashing gel.
Apply the paste to the faux fur and spread with a brush.
Wash off any residue with a clean sponge soaked in warm water. You can also leave the product until it dries completely, and then simply shake it off or brush it off.

Method 3 – machine wash

Unnatural fur coats can be washed in a washing machine. delicate mode. Spin cannot be used! Faux fur takes a long time to dry, so hang the product on a balcony or in a room with open windows. Make sure that it is not exposed to direct sunlight. However, this also applies to natural fur. The sun will make the pile brittle. It will also lose its shine and may turn slightly yellow.

Method 4 - gasoline for greasy stains

Wipe shiny pockets, sleeves or a fur collar with a cotton swab dipped in clean gasoline. An alternative to it would be a liquid for cleaning carpets and upholstery. In this case, follow the instructions on the package.

Important! The products will have to be washed off with water or a damp cloth!

Method 5 – powder and water

This is the safest and easiest way to clean faux fur!

Prepare a soap solution by mixing washing powder (1 tbsp; should not contain bleaches) and 1 liter of water.
Cool this liquid and apply it to the fur using a cotton swab or a regular washcloth.
At the end of the process, wash off the foam with a clean cloth soaked in warm water.

Now you know exactly how and with what to clean fur at home. But don’t forget about the nuances, because they are very important!

Do not dry the fur item by hanging it on a radiator, ironing it or blowing it with a hairdryer;
For natural fur, washing is strictly prohibited. The flesh should not get wet!
Vinegar is contraindicated for faux fur;
Do not use sawdust from coniferous trees for cleaning - they contain resin;
Do not comb the astrakhan fur, just shake it well;
If the fur has lost its shine, soak a cotton cloth in glycerin or table vinegar and run it through the pile. Apply alcohol on top and comb the fur with a comb. Do not repeat too often - vinegar makes the fur hard;
To the ground fur collar does not become rough over time, regularly treat it with a glycerin solution (1 part water and glycerin).

Video: bio-cleaning of fur:

For every woman, buying a fur coat is a very important and joyful event. But over time, stains appear on your favorite fur coat and it loses its original appearance, covered with dust in the closet.

So that your fur coat serves you for a long time, preserving attractive appearance, you need to know a few rules:

In order to hang a fur coat, there is a hanger. Remember, it's a hanger, not a hook. She should be broad-shouldered and with long crochet. In the closet, the fur coat should hang freely, without touching neighboring things. Store your fur coat out of direct sunlight.

Before putting your fur coat in the closet, inspect it carefully. Look to see if there are any holes, damage or stains that were not noticed before. Special attention Take the time to inspect the bottom of the fur coat. This is usually where the most a large number of dirt and dust. Remember that dirty things are the most delicious food for moths. And stains, if they are not removed in time, will turn into practically irremovable in six months. Our roads are watered with reagents all winter, and this harms not only our shoes, but also our fur coats.

HOW TO CLEAN A NATURAL FUR FUR AT HOME:.

Cleaning a fur product is not an easy task, it is associated with certain risks, so before you start, you should think carefully and test the method you have chosen on an inconspicuous area. Remember that the advice is advisory in nature, and all responsibility for cleaning the fur product on our own, lies only with you.

The first thing you can do is lay your fur item out on a wet sheet, fur side down, and lightly beat it out.

Before removing the fur coat, moisten a sponge in cold water with a small amount of washing powder (without enzymes) and wipe the dirty areas on the fur coat.

If you have a fur coat with long pile, you can use a mixture of talcum powder and gasoline.

There is a stain on a fur coat from a sweet drink or bird droppings - this can be cleaned using regular soap. It is enough to soap a wet cloth and rub the stain, and then wipe the wet fur with a dry cloth. If you are unable to remove the stain, try simply rubbing it with gasoline. For weathering unpleasant odor, you need to hang your fur coat for a long time on the balcony.

To give the fur shine, you can wipe it with a cloth soaked in vinegar. But remember that this can cause the fur to become stiff, which can be eliminated by lubricating it from the inside with glycerin, half diluted with water.

To remove stains from sweat and grease, you need: mix 1 teaspoon ammonia and 3 tablespoons of table salt, dissolve in 0.5 liters of water and wipe the contaminated areas with this mixture.

Another way is to wipe the fur with a soft cloth soaked in gasoline, then sprinkle it with starch, and after a while shake and comb. Fluffy fur and fresh stain should be wiped in the direction of the lint, and smooth, with an old stain - against the nap.

However, there is an opinion: to clean fur (under no circumstances!) you should not use gasoline.

To restore the softness of a somewhat rough fur coat you will need: egg yolk, petroleum jelly and glycerin. Grind the yolk with 1 tbsp. spoon of Vaseline, add 0.5 liters of warm water. Wipe the leather base of the fur with the resulting mixture, dry, knead and pull in different directions.

Heavily soiled fur clothing is cleaned with hot bran. Place the bran in a saucepan, put it on the fire and stir until warmed through (be careful not to burn). Sprinkle the fur item laid out on the table with hot bran, rub it with your hand in the direction of the pile and back. Then shake the fur and beat it out. Comb the pile with a comb or wire brush. Instead of bran, you can take coarse corn fly.

To remove grease stains from fur, use a mixture of gasoline and dried potato flour, taken in equal parts. You should first carry out a test cleaning in an inconspicuous place, for example, on a spare seam. If after drying the fur does not change color or fluffiness, you can clean the entire product. The prepared gruel is rubbed into the worn area and the gasoline is allowed to evaporate. Left on the pile White powder clean with a brush and shake out.

Stains from fur are removed by wiping with a cotton swab moistened with a special solution. Here are two recipes: 1- equal parts denatured alcohol and ammonia water.

2- One part ammonia water, three parts table salt and 50 parts water. The wiped fur should be blotted with a clean linen towel, knocked out and shaken.

The collar or sleeves of your fur coat are greasy, decide this problem a mixture of alcohol, water and table vinegar(in equal parts). The mixture should be applied to the contaminated fur and then wiped with a clean cotton napkin. This mixture will help get rid of oil stains and it will be good way clean your natural fur coat.

If you need to clean a NATURAL FUR FUR COAT, then make a solution of ammonia and water (1:4). Apply this mixture to the contaminated area with a cotton pad, then, before the fur has time to dry, wipe it with water with the addition of vinegar (a teaspoon of vinegar per liter of water) and then wipe with a dry cotton napkin. Vinegar will restore the shine to your fur coat.

WHITE FUR is “washed” in potato flour or starch, then shaken out thoroughly. And for shine, wipe with a cloth soaked in vinegar essence.

If fur clothing gets wet, don't panic. Most furs can easily withstand snow or light rain. Shake the coat and hang it on a hanger to dry in a well-ventilated room. Resist the temptation to speed up the drying process with a hairdryer or hang your fur coat near the radiator. Doesn't like fur high temperature. After the fur coat is dry, shake it again.

If a fur coat or sheepskin coat is soaked through with water, immediately take it to a specialist furrier in a fur studio. There they will accurately determine the extent of the damage caused and professionally carry out rehabilitation.

If the fur is too dirty or has stains from coffee, wine or sauce, you should not clean it yourself - it is better to take it to the dry cleaner.

Do not dry wet fur in the sun or over a fire! You can't wash fur!

First knock out dirty items from KARAKUL, and then, to add shine, wipe several times with a palm lightly moistened with olive oil.

The fur of BEAVER, OTTER, MOLE is laid out on the table, sprinkled with hot sand and wiped with the palm of your hand. Dirty sand is shaken off, and clean sand is added until the product becomes completely clean (the palm will not become dirty).

Products made from GOAT are washed with cold soapy water, then rinsed and dried.

It is recommended to treat items made from ARTIFICIAL FUR with aerosol antistatic agents from time to time: they protect the fur from contamination, as they remove electrostatic charges, because of which various specks of dust and specks are attracted to the fur.

You can clean faux fur by preparing a soap solution (2-3 tablespoons of detergent for synthetic fabrics per 1 liter of water), whipping up the foam and, taking it on a brush, rub the fur along the pile, after which remove the remaining foam from the fur with a slightly moistened cotton cloth. with a rag.

The sheepskin coat can be cleaned with soapy water with the addition of ammonia, while changing the water more often. We buy ammonia at the pharmacy and dilute it with water in a ratio of 1:5. Dip a cotton swab into this solution and clean the greasy area. Next, wipe with a sponge soaked in another solution - water and vinegar (1 teaspoon of vinegar per liter of water). Now, very good, let's blot the moisture dry gauze pad and dry at room temperature.

When the sheepskin coat is completely dry, rub the surface with a white school eraser or the smallest sandpaper. AND The final stage- thoroughly wipe the entire thing with a rubber brush for suede, and it will become as good as new!

PRO TIP:

Dry cleaning "Bello" specializes in cleaning any products from all types of natural fur.

- "Is it possible to clean a fur coat at home? And why do they talk in the studio about the dangers of cleaning?" -

- “The specialists from the studio are right - it’s better not to clean at all than to clean in a regular dry cleaner without special equipment and preparations. This can do more harm than good. But professional, specialized cleaning is completely different processes and results that prolong the life of the product, retain their shape and newness. You cannot clean fur at home, you can only do a small preventive treatment of small areas, and then only if you have necessary knowledge and experience. Otherwise, the product is very easy to spoil. Many media outlets publish “grandmother’s” recipes for cleaning at home: with bran, and oil, and flour, and alcohol, and acetone... Apart from horror about the consequences that can happen to fur, they do not cause anything for specialists. And then they bring us products that are scary to look at, and ask us to help in some way. Dear ladies, your sheepskin coat is not a sheepskin coat, for the cleaning of which all this nonsense was written!”

Remember that fur can be easily damaged! You always have a choice: take the advice of the old masters or take your fur coat to the dry cleaner.

Clean your fur coat quickly and profitably

available at the DIANA dry cleaning and laundry chain. Print out a 10% discount coupon!

Address and phone number · www.dryclean.ru

Clothes have the unpleasant property of getting dirty while being worn. If we are talking about T-shirts or trousers, they are easier to clean than, for example, a mink coat. All fur products require careful care and compliance with certain precautions. Mink is not as easy to clean as it might seem at first glance. At the slightest failure to follow the instructions, there is a risk of irreversibly damaging the product.

Cleaning a mink with sawdust

If we talk about production enterprises, mink products are cleaned there using sawdust. The method is effective, so take a closer look at it first.

You will need, respectively, sawdust and medical alcohol. It is better to purchase sawdust from pet stores; it should be made from oak, aspen, maple or linden.
Prepare a container, place sawdust in it and pour alcohol. From some sources you can find out that gasoline is suitable for filling. But after it the unpleasant smell will remain for a long time.
Mix sawdust with alcohol. Lay the fur item on a table or other flat surface. Sprinkle with the prepared mixture.
Gently begin to knead the fur with your hands so that during the manipulation the wood absorbs all the dirt. Then shake out the fur coat and comb it with a special brush for fur products.

Cleaning mink with shampoo

Often stains appear on fur products that need to be eliminated first. In this case, sawdust will not help; a radical approach is required.

Choose a shampoo with maximum moisture so that the product does not dry out the skin of the product. Prepare a bowl of water room temperature or bring the liquid to 30 degrees maximum.
Pour in a capful of shampoo and mix with your hands. It is important to get a dense foam. Take a second container and fill it with clean (soft) water without impurities.
Spread the fur coat on a flat surface, arm yourself with a sponge. Dip it into the solution and walk over the area of the fur that needs cleaning.
Do not wet the fur too much so that the fur coat does not become too wet later. Try not to touch the leather part at all.
After wiping, wipe with a clean cloth soaked in warm water. Then get rid of moisture from your fur coat using paper towel or napkins.
Finally, comb the fur with a thin comb or a special clothes brush. Leave the fur coat to dry on hangers in a well-ventilated area.

Cleaning a mink with sand

The method is environmentally friendly and safe. To clean a mink coat, follow the instructions.

Collect river sand, then rinse it several times under the tap. Additionally, pour boiling water over it and allow excess moisture to drain.
Prepare a frying pan, put all the sand in it and heat it over the fire to a temperature between medium and high.
Spread the mink coat on a flat surface, sprinkle with warm sand. Touch only the dirtiest areas of the product.
Wait until the sand reaches room temperature. Then shake the fur coat and comb it.

At home, you can clean a mink coat using regular powder or talc. The composition is famous for its ability to absorb excess dirt and grease. Especially effective way It will turn out to be white for a mink.

Before you start working, equip yourself with thin medical gloves. Choose a flat surface and spread the fur product on it.
Sift the talc, then sprinkle it over the entire fur coat with contaminated areas. There is no need to spread the powder, as they say, in a heap. Just work the pile thoroughly.
When the powder covers the entire fur coat, begin to slowly rub it into the surface. After this, take the product out into fresh air and shake gently.
You can additionally work on the item with a hairdryer using cold air. This way the powder is blown out of the product cavity faster. Finally, comb your fur coat.
Talcum powder can be purchased at a pharmacy. But if you don't have this option, use regular corn or potato starch. The processing technology is identical. The main thing is to comb your fur coat well at the end.

Cleaning a mink with semolina

Semolina is one of those inexpensive products food, which are also widely used in everyday life. Choose a high-quality composition and follow the instructions.

Semolina returns shine to a fur coat and perfectly absorbs dirt. To begin manipulation, select a flat surface and spread the product.
Semolina copes with dirt on pockets, collars, and cuffs. It also removes yellowness, which often appears on white fur products.
Sprinkle dry semolina onto the contaminated areas and rub in gently with your hands without pressing hard. After this, shake out the item of clothing well and comb your fur coat.

How to clean stains from a mink fur coat

All of the above methods, with the exception of cleaning with shampoo, refer to dry processing. To remove stubborn stains from the surface of a fur product, you will have to resort to the wet method.

Soap solution

Pour water at a temperature of 30 degrees into a basin, add a little baby shampoo or liquid soap. Beat until foamy.
Spread mink product on the table, dip the sponge into the solution and walk over the dirty areas.
Do not wet the leather part to avoid causing dampness. After cleansing, treat the fur coat with a damp, clean cloth and comb the fur.

Table vinegar

The solution is used to add shine to white and dark fur items. Arm yourself with vinegar with a concentration of no higher than 6%. Soak a cotton sponge in it and squeeze out.
Spread the item on the table and carefully walk over the stained area. If the fur is short, move against its growth. For long movements, they are carried out according to height.
To avoid damaging your favorite product, be sure to squeeze out the cotton pad. Vinegar should not penetrate the skin of the fur coat.

Gasoline for lighters

Gasoline for refilling lighters is considered the purest, and therefore suitable for removing complex contaminants from fur products. This option is only suitable for dark fur coats.
Dampen a clothes brush, then brush the item with it. Do not exert strong mechanical influence, move with a “light hand”.
Finally, leave the fur coat on fresh air for ventilation. The main thing is to avoid direct exposure ultraviolet rays. Otherwise, stains will appear on the item.

Cleaning the lining of a mink coat

Often, after a season of wearing a fur coat, the fur remains almost clean, which cannot be said about the lining. To carry out the manipulation with maximum benefit, it is recommended to tear off the fabric. Take advantage special tool, do not damage the product.
After carefully performing the manipulation, wash the fabric. Determine the type of lining in advance and set the appropriate mode on washing machine. If the fabric is made of polyester or silk, the temperature should not exceed 40 degrees.
If the lining is made of cotton, the temperature may be higher. After washing, the product must be rinsed thoroughly. This way you can avoid streaks when drying. After the last step, iron the fabric thoroughly and carefully sew it back onto the fur coat.
Not everyone decides to take such a responsible step. If you doubt that you can sew the lining properly, peel it off the fur coat. Please note that in this case the manipulation must be carried out with extreme caution. Under no circumstances should you wet the bottom of your fur coat.
To properly clean the lining, it is recommended to saturate the sponge with foam and distribute the soap mixture over the inside of the fur coat. Next, the fabric must be cleaned with a clothes brush. The soap solution is removed with a damp sponge. After this, blot the lining with a cloth.
Hang the fur coat on a hanger in a suitable place, the temperature should be at room temperature. Please note that there should not be high humidity in the room. It's no secret that in wet weather in winter, a fur coat gets dirty from the bottom most of all, so it is recommended to sew on an additional lining in advance.

Precautionary measures

So as not to spoil expensive product, it is important to follow simple recommendations.

Remember, a fur coat should not be washed under any circumstances. As a result, the fur becomes irrevocably deformed and deteriorates.
Do not try to dry the product near radiators, open fires or heaters. The fur also deteriorates.
If you find yourself in unfavorable weather, and the fur coat gets wet, hang it on a hanger. Dry the product in a room at natural temperature.
Do not even think about ironing the fur, even at the lowest temperature. In any case, you will not be able to get rid of severe wrinkles without consequences.
It is strictly forbidden to store the product folded. If this has already happened, hang the fur coat on a hanger. After some time it should stretch out.

Clean fur only when necessary. Look at the degree of contamination of the product. Due to frequent dry cleaning, the pile loses its original structure and begins to crumble. Make it a habit to use the services of professionals.
On average, mink coats can withstand up to 5 dry cleanings. It is prohibited to keep fur coats in plastic bags. This material highly electrifies the pile. In addition, the fur deteriorates due to lack of oxygen.
Every time you leave an item on long-term storage in a special room, make sure there are no pests. To prevent the fur coat from being damaged by various insects, it is recommended to treat the room with special products.
IN people's councils has proven itself in pest control simple newspaper. Stuff the sleeves with paper; the printed ink repels insects (moths). In addition, the fur coat will preserve good shape. It is prohibited to store other fur items nearby.
Remember that fur products perfectly absorb various odors. Therefore, the room must be thoroughly ventilated before storage. You can put a special bag with pleasant incense in the room.
It is forbidden to spray perfume on a fur coat; the cosmetic product often leaves stains. The latter cannot be removed even with dry cleaning. Do not try to constantly carry a bag on your arm or shoulder. In this place, the fur will soon simply be erased.

If your mink fur coat is not too dirty, resort to dry cleaning methods. In this case it will be suitable semolina, talc without fragrances, hot sand. To remove complex contaminants, you will need sophisticated artillery in the form of gasoline for refilling lighters, vinegar solution, and shampoo with water. Be sure to follow safety precautions when working with fur products.

Video: cleaning a white mink coat

A fur coat made from otter or beaver will last you the longest: up to 20 seasons. Mink is slightly less durable: 10 seasons. Most short term service for squirrels and rabbits: 2–4 years. But when proper care Fur items can retain their shine much longer.

How to tell if your fur is dirty

Spots and yellowness are immediately visible. A test with a hairdryer will help determine the degree of general dirtiness of the item and find the most greasy areas.

Hang your fur coat on hangers and direct cold air from a hairdryer onto it. Do the fibers fly freely and then easily fall back into place? The fur is clean. If not, you need to clean it.

But first, remember that under no circumstances should you do this with fur products.

Taboo when cleaning fur

Fur cannot be washed! If the fur (the skin that holds the fur) gets wet, it can become rough and cracked. In this case, the product becomes deformed and becomes bald.
Fur should not be dried with a hairdryer, on a radiator or under straight sun rays! Possible only on outdoors or in a well-ventilated area.
Fur is not allowed! Even from the inside out.
Fur cannot be cleaned household chemicals for removing rust, washing powders with enzymes, bleaches.

Before using any other product, test it on a small, inconspicuous area of the product. For example, under the arms.

How to get rid of dust

Even in a well-closed case, a fur coat or vest can become dusty. Therefore, before you remove fur item for storage, and also before wearing, refresh it.

Spread a damp white cotton sheet on the floor. Place the fur coat on top and beat it thoroughly, first on one side and then on the other. After that, hang it on a hanger and comb it.

If the fur is tangled and matted, spray the item warm water from a spray bottle and let dry. Then comb. The pile will fall into place. For the same purpose, you can carefully walk over the fur with a steamer.

How to restore shine to fur

To make your fur coat or collar sparkle again in the sun, treat it with a solution of lemon juice or table vinegar (not essence!).

Divorce lemon juice or table vinegar in water in a ratio of 1: 1. Using a sponge or soft natural cloth, treat the fur. It is important that the sponge or rag is wrung out well. The pile should not be wetted, but rather wiped.

When the product dries, comb it. The effectiveness of this product is especially noticeable on mink.

Another way to restore shine to fur is to use walnuts. Grind the kernels, wrap them in gauze and rub the fur. The released nut oil will refresh the appearance of the product.

In most cases, the measures described - knocking it out and returning the shine - are enough to make a fur coat, hat or vest look like new. Nose natural fur more may occur serious problems. It may turn yellow, become greasy, or become stained.

How to get rid of yellowness

Over time, light fur, as well as fur with white hair at the tips (silver fox, chinchilla and others) becomes yellow tint. The product immediately loses its presentability.

There are several ways to clean fur from yellowness.

In glass warm water dissolve 1 tablespoon of table salt and ½ tablespoon of ammonia. Apply the solution using a well-wrung out soft cloth. Dry and comb.
Dissolve 1 tablespoon of hydrogen peroxide in a glass of warm water. Apply the solution to the product, let dry, and comb.
Dissolve 1 tablespoon of pet shampoo in a glass of warm water. Beat the foam and apply it to the pile using a sponge. After 5 minutes, remove the foam with a sponge or cloth soaked in clean water. Dry and comb.

Products with short pile can be wiped both with and against the wool. On long fur Cleaning products are applied according to its growth, after which the pile can be ruffled.

When removing greasy deposits and stains, the color of natural fur is also important.

How to clean white fur

niknikpo/Depositphotos.com

With greasy and greasy spots starch, talc and semolina help fight white fur. They absorb dirt and unpleasant odors.

Take starch (semolina or talcum powder) and pour it onto the contaminated area. Using a soft brush, distribute the substance between the fibers or gently rub the fur with your hands, as if you were washing. Shake the product well to remove any residue.

The dirtier the fur, the darker the starch, talc or semolina will be. The procedure must be repeated several times until the substance stops getting dirty.

It’s even more effective if you heat starch, talc or cereal before cleaning. This can be done in a dry frying pan or in the microwave.

It is important to remove all remnants of the product, otherwise it will become food for moths. Therefore, the product can not only be shaken well, but also vacuumed with a low-power vacuum cleaner. For example, the kind that is used to clean the keyboard.

How to clean dark fur

To combat stains on dark fur, the same method is used, but with different absorbents.

Rye bran. Suitable for coarse fur (nutria, goat, wolf).
Sawdust. Ideal for muskrat and otter fur. But under no circumstances should you use softwood sawdust: they contain resins.
Sand. Copes well with dirt on the fur of moles and beavers.

How to remove stains from fur

Stains on fur clothing may have different nature and origin. For example, natural suede bags readily give off the color of fur when worn on the shoulder. You can get dirty with sauce when you eat on the run, or make a blot with a stationery pen.

You can remove stains from dark fur using gasoline (white fur will turn yellow). Refined gasoline with a high octane number. Sometimes it is applied to pure form, but more often mixed with starch or washing powder without enzymes until the consistency of sour cream. A couple of minutes after application, the mixture should be removed with a sponge soaked in clean water, and the product should be dried and combed.

Stains with light fur can be removed using acetone or alcohol, also by mixing liquids with starch or baking soda.

The stronger the dye and older spot, the more difficult it is to cope with it at home. If the above methods do not work, do not experiment: take the fur coat to.

How to care for the flesh

If you notice that the leather base of the fur product has become rough, perform the following procedure.

Dissolve a little glycerin or petroleum jelly in a liter of warm water. egg yolk. Wipe the product from the inside out with the resulting mixture. Gently remember and stretch the flesh. Then remove the remaining mixture and lay the item to dry inside out.

How to clean faux fur

With faux fur products, everything is simpler and more complex at the same time.

Easier because they are washable. Preferably by hand, but it can also be done in a machine using delicate mode (up to 40 degrees, up to 600 rpm) using gentle powders and without spinning.

It’s more difficult because it’s difficult to guess with a mechanical cleaning product.

Vinegar and acetone should not be used to clean faux fur.

Otherwise, you can use all the same methods as for natural fur.

Do you know other life hacks for caring for natural and faux fur? Share them in the comments.