In spring and summer, every girl wants to be attractive. Not only the image as a whole plays a big role, but also individual details: shoes, elastic bands, invisible ones. To keep your hair always in order and your hairstyle to look neat, you should use not only hairpins, but also hair clips. It's not difficult to make them with your own hands. The process is fun and does not take much time.
Little children enjoy making beautiful hair clips with their own hands. This great way stand out, because you won’t find similar products anywhere else. There are many ideas and ways to make hairpins. Simplify the task modern materials, which are presented in a wide range in stores.
Types of hair clips can be different. For creative process Satin, velvet, light chiffon, crepe-satin are suitable. A twister for a hairstyle or bun should be made of dense, soft material. Fabrics with prints look interesting: flowers, figures. It is necessary to choose threads that match the color of the product, otherwise the design will not look beautiful. You can buy ready-made ribbons at a fabric store. They are easier to work with: they are already processed around the edges.
A base will also come in handy. It is better to take metal left over from old products.
Using a special glue, the decoration itself will be applied to it. Invisibility designs are also suitable. You can even use regular hairpins.
From fabric
Children's hair clips made from ribbons are the most quick way stand out and add charm to your image. You will need:
- ribbon 5 cm wide in one color;
- ribbon 2.5 cm wide in a different shade;
- threads, needles;
- bead;
- automatic base;
- glue "Moment".
Now you can begin the process itself.
Instructions
Hairpin from satin ribbons made for hairstyle. Now you can safely wear it. There is another option.
From grosgrain ribbons
They have a suitable structure and a wide range of colors. Products with bright colors suitable for children: they look original and do not tangle the hair.
You will need:
- tapes 10 mm and 22 mm long. It is better to take them in different colors;
- scissors, thin fishing line, thread, needles, lighter;
- basis for the product;
- strong glue.
Instructions
- First you need to decide on the designs. To do this, the ribbons should be folded in the shape of a flower or a bow. Then you need to choose the size. The length and width of the entire structure depend on it.
- Once the dimensions have been selected, you need to cut the ribbons. In this case, it is advisable to leave a margin of 2-3 mm. The edges must be burned using a lighter or match.
- The ends of the ribbons must be connected using fishing line and a needle.
- Carefully secure the thread in the center and wind the tape well with it. You will get a bow.
- Then you need to take another smaller tape. It is wrapped over the base. Anything unnecessary should be removed.
- You can glue or sew rhinestones, a bead, or a button into the middle. Then the entire structure is connected to the base.
From scrap materials
You can make beautiful bobby pins for your hair or bun using available tools that are always available in any home. Even bumpits can be made this way. Below are some popular and unusual options.
For high styling
Formal hairstyles require special decorations, so ordinary bobby pins will not work here. You need bumpits for volume hair, as well as wedding clips for a spectacular hairstyle. If you show your imagination, you can create an original hairpin that no one else will have.
So here you go unusual option. Suitable for both bun and other styling:
- You need to prepare materials: fabric that can hold its shape, flexible and elastic fishing line, dry glitter, glue, threads and needles, a base for the invisible.
- It is recommended to use a hard standing fabric, otherwise the invisible petals will lie unsightly. You need to cut several of these petals. Each of them can be processed along the edges so that the fabric does not fall apart.
- It's fun to create pieces of fishing line with glitter. To do this, each piece needs to be dipped in glue, and then in dry glitter. Only the tip of the fishing line needs to be dipped in glitter. The ends of the wire should be shiny. You need to cut several of these pieces.
- Now the fishing line and petals need to be securely connected to each other. To do this, pieces of fabric are sewn or glued onto the base, and pieces of fishing line are inserted into the middle. This can be done in several ways, but it is better to make a ring at each end of the fishing line, which is then easily sewn to the workpiece.
Additionally, you can use bumpits - a tool for creating volume at the roots. This product bumpits – great way styling
Hairstyle occupies a special place in the image of every beauty. By creating it, great attention is given to accessories: ribbons, bows, hairpins. The main condition is that the hair decoration must be of high quality, chosen tastefully and please the owner.
It often happens that finished goods, which are sold in stores do not suit the chosen image. Then there is only one way out - to make a hairpin yourself.
It's always nice to wear jewelry that you made yourself. They differ from those purchased in a store because... the craftswoman puts her imagination into them. Complete your look original accessory Can a woman of any age.
In addition, a self-made decoration can become a good gift for a loved one.
Ribbon hair clips for beginners
Let's figure out how easy it is to make hairpins from ribbons, and how it will help us detailed master class for this work. We suggest discussing this in this useful lesson. Let's try to build and glue together bright, cute and beautiful jewelry for the ponytails of little fashionistas.
You can make many useful things from satin and high-quality grosgrain ribbons, but they are most often used to make elastic bands or hairpins. The only thing is that this creative material is easy to work with, practical and, not least important, available to craftswomen in any color and quantity.
Having picked up bright ribbons and beads delicate flowers Let's get an original couple of useful things for the girl. Such hairpins can become a stylish gift for a holiday or birthday.
Let's start making hairpins from combined ribbons and figure out how simple the master class is.
To make hairpins (elastic bands) from satin ribbons with your own hands, you need the following material:
- 1. Rep tape width 2.5 cm – 62 cm,
- 2. Organza ribbon width 2.5 cm - 60 cm,
- 3. Satin ribbon thin width 0.5 cm - 32 cm orange and 16 cm yellow,
- 4. White spool thread and small eye sewing needle,
- 5. Silicone hot glue,
- 6. White plastic center – 2 pcs.,
- 7. Scissors,
- 8. Fastening – clamps 2 pcs.,
- 9. Matches or candle.
A strong base for making hairpins will be two rep ribbons. They need to be cut into two sections for each hairpin, 8 cm long, as shown in the photo.
To make the ribbon more attractive and beautiful, we will cut its edges diagonally into a triangle. To do this, the ribbon at the edge needs to be folded front side inside and make cuts on both sides.
Rep ribbon, like satin ribbon, tends to crumble at the edges and unravel. To avoid this, we just need to take matches or a candle, with the help of which the cut edges need to be slightly scorched.
To combine two tapes, you need to apply glue to the bottom one in its center and cover it with a second tape.
For the central center of the ribbon hairpin, we will prepare pieces of rep and organza. The edges of the organza are also singed, but very quickly and carefully. This material burns easily.
We fold the grosgrain piece of ribbon for the middle in half and sew it with a simple seam.
Since the thread is not torn off, we use it to tighten the part from the rep, securing the thread to a knot.
We also tighten the organza ribbon, singed at the edges, using a thread and a needle.
By pulling the thread through the center of the bows, they need to be fastened together.
We fasten it.
We also sew the second organza bow to the ribbons. We sew all three bows well again and tighten them to fix them in the center.
For two hairpins self made Let's make two blanks.
Thin satin ribbon orange color cut into lengths indicated in the photo.
We will need only 4 of these blanks.
Lightly grease the central part of the rep with glue and attach thin satin ribbons there. Before attaching these additional ribbons, their edges also need to be trimmed and singed.
Yellow thin satin ribbon We will prepare it in the form of 7.5 cm segments, the edges of which we cut off and singe.
We fasten these segments in the center of the hairpin.
We generously fill the ribbons collected together - the middle ones, which we made from three bows (rep and organza) on the wrong side with hot glue and combine them with the main part made of rep to create hairpins.
To hide the threads in the middle of the hairpin, you can sew a decorative element (button) or place a half-bead or plastic round center there to suit your taste. It is attached using hot or super glue. It is best to use hot glue, since super glue has a specific smell.
To securely attach the hairpin to your hair, you can use a metal clip. It is attached to the base of the hairpins with glue. The finished hairpins are allowed to dry, and they are completely ready.
In this lesson we suggested making these hairpins from ribbons and a master class for them with your own hands. Happy crafting and creative success.
Kanzashi hairpins
Kanzashi is a technique for making flowers from ribbons and fabric. This is a traditional art form of Japan and China. Kanzashi jewelry is quite popular there. They are worn by brides and decorated with traditional kimonos.
The kanzashi technique came to our country not so long ago. Rapidly gained popularity among women of different ages. But schoolgirls especially loved it.
Similar decorations in the form of hairpins, elastic bands, hairpins can be found in stores specializing in hand-made products or you can make them yourself.
Bow hair clip for a schoolgirl
Every mother wants her schoolgirl to look beautiful. Big choice ready-made hairpins in a store does not guarantee that it will look original and unique. And the advantage of a self-made accessory is that it is made with love and only in a single copy.
To make bows you do not need to have any special skills or abilities. The whole job will take no more than 10-15 minutes.
Hairpins made from grosgrain ribbons
Hairpins made from several types of ribbons can be an excellent addition to the outfit of little fashionistas. Ribbons made of rep and satin go well together.
Rep tape is made from polyester thread. It is a narrow strip with characteristic transverse scars. It is easy to work with, it is highly rigid and retains its shape well.
Satin ribbons are a widely used material for needlework. They are made from viscose or acetate silk.
You can decorate a hair clip from ribbons in different ways decorative elements, which will serve as the center of the flower.
If it is not possible to purchase a ribbon, you can make a similar hairpin from small leftover fabric.
The process of creating jewelry is quite exciting and does not require much skill. Making the accessory is easy, just follow the instructions.
Read more about how to make hairpins with mushrooms in the master class ""
Elastic band "Ladybug"
The most adored insects among children are considered ladybugs. Therefore, hair accessories that contain the image of the “sun” look funny, cause affection, and most importantly, children like them.
These decorations are quite easy to make yourself. And you can involve your child in the manufacturing process, then the accessory will be even more beloved and valuable to him.
Such a bouquet of roses will become great decoration for hair.
For a bouquet of roses we will need the following materials:
- ribbon Pink colour, 2.5 cm wide and 230 cm long.
-ribbon white, 2.5 cm wide and 154 cm long.
- green satin ribbon 150 cm long.
-glue gun.
- for decoration: some beads, fishing line, braid.
- flower stamens.
- lighter.
- large hair clip.
- needle and thread.
- scissors.
We begin work by cutting the tape. Take the tape pink shade and cut into strips 7 cm long. For one flower you will need 11 strips, and pink roses there will be three, respectively 33 stripes, in total.
We start with one rose. We take 11 strips and begin to make flower petals from them. Burn the edges with a lighter. In each strip, we bend the corners on both sides to the wrong side and secure with sewing needles.
Now we take a needle and thread, preferably in the color of the ribbon, and fasten it along the edge where the needles were bent.
Then we tighten the thread and secure the resulting petal.
We make 11 such blanks.
Then we will collect the bud with a glue gun. It consists of 3 petals. We twist the first piece into a tube and secure it. Now we glue it to the middle of the second petal along the entire height, pressing the edges.
And glue the third petal, closing free edges second. The bud is ready.
The second row also consists of 3 petals. We glue these blanks slightly overlapping each other, placing them in a circle.
But in the third row there will be 5 petals, also overlapping each other in a spiral. The flower is ready.
And in the end you get three pink and two white roses.
Now you need to glue the backing to the flowers. They are green, which means we will cut them from green satin ribbon. Cut strips 6 cm long, 25 pieces. 5 pieces per rose.
We take a strip, fold it in half lengthwise, right side inward, and cut it out with scissors, scorching it, gluing the edges to each other, or cut it out with a soldering iron with a fine tip.
We turn these 5 petals right side up, getting a boat shape.
But on one side of the leaves we cut off the corners from 0.5 to 1 cm, and burn the smooth edge.
When the leaves are ready, turn the rose upside down and glue these blanks with the cut sides to the middle of the bottom of the rose.
The rose with green leaves is ready.
In the same way we glue the leaves to all 5 roses.
Now we need a base on which we will collect our bouquet. Cut out 2 circles with a diameter of 7 cm.
And for decoration we take 40 cm braid and any thin fishing line 60 cm long.
We glue the braid onto one circle, cover it with the second circle and secure it with a glue gun.
We cut the thin ribbon into three strips and fold each strip in half twice, securing with a needle.
Straighten, you get 2 curls.
Now we take the stamens and glue them between these two blanks. And on the fishing line we glue small beads with a gap from each other.
One of the main elements of any image of a young lady is the hairstyle and, of course, hairpins, ribbons, etc. But often many are faced with the problem when it is impossible to find in the store the accessory that fully matches the chosen outfit. Don't despair - there is a way out of this situation: you can make a hair clip yourself!
Hairpins made of satin ribbons: master class
There are many options for making DIY hair clips. But one of the simplest and most beautiful ones is products made from satin ribbons! So, to make such a decoration you will need: a satin ribbon of the main color 5 cm wide, a satin ribbon 2.5 cm wide of another color or the same, but with polka dots, a needle and thread, a small bead light shade, automatic hairpin, scissors, Moment glue. Once everything you need is at hand, you can proceed directly to making the hairpin.
- To begin, take a ribbon of the main color and cut it into pieces 7 cm long.
- Then fold each resulting strip and fold it at an angle of 90 degrees so that the distance from the corner to the edge of the strip is the same.
- Now you need to string the resulting petal onto a thread and a needle.
- The same manipulations need to be done with 4 more petals. The result should be the first flower.
- Exactly the same flower must be made from a ribbon of the main color, only its size must be larger.
- Flowers need to be glued onto a pre-prepared base. It's very simple to make - just cover a circle of cardboard with fabric of the same color.
- Next you need to make 1 more type of petals. To do this, take a polka dot ribbon and cut it into strips 5 cm long. From each piece you get 1 petal. Using a ruler and a soldering iron, you need to solder the corner, and if you don’t have a soldering iron at hand, you can simply sew it together with small stitches. After this, the excess fabric must be trimmed, while being careful not to pull the fabric.
- Now the tape should be folded lengthwise wrong side inside. The cut corner should be sharp, and the sharper it is, the smoother the petal itself will be.
- The petal now needs to be straightened and the corners bent towards the center. And fuse the edge with a soldering iron or lighter.
- You need to make 6 such petals. Afterwards they should be sewn into bundles of 3 pieces.
- Once all the elements are ready, you can begin to assemble the hairpin. First, stick a flower of the largest diameter in the middle, and a smaller flower on top of it. Moreover, they should be attached so that the petals of the upper flower are located between the petals of the lower one, and a bead should be glued in the center of the smaller flower. Finally, you need to glue small ones on the sides. sharp petals. That's all - the hair decoration is ready!
Rep ribbon hairpins: popular options
Rep ribbons have an unusual structure, which is why they look impressive. Flowers, bows, etc. are made from them. One of the advantages of this material is that it is very dense and almost does not crumble. And hairpins made from grosgrain ribbons hold their shape well.
How to make a hair clip from grosgrain ribbon?
Option 1. First of all, you need to take everything necessary materials and tools, namely: grosgrain ribbons 10 mm and 22 mm long, they should also differ in color, scissors, lighter, colorless thin fishing line, needle, hairpin - base, glue, trash cup.
Manufacturing:
- First you need to match the ribbons to each other by color. To do this, you need to randomly design a bow by placing ribbons next to each other. The length of the workpiece depends directly on what kind of bow will be needed - short or longer.
- Once the desired option has been selected, you need to start cutting wide tape, and taking into account a margin of 2 mm. The edges of the workpiece must be burned.
- Now the ends of the workpiece should be connected using a needle and fishing line.
- Then you need to fasten the thread in the center and wrap it several times to create a bow - the base.
- Then you need to take a second ribbon of a different color, 10 mm wide, and wrap it on top of the base. After the required length has been determined with a margin of 2 mm, the rest needs to be cut.
- Now you need to sew a ribbon to the bow and pull it in the middle.
- All that remains is to hide all the seams and threads - to do this you need to take a piece of 10 mm plain tape, measure the required length and attach with threads. If desired, you can sew a button or glue a rhinestone to the middle.
- It's time to prepare the base hairpin itself. It needs to be covered with tape using glue, and a bow should be glued on top. The hairpin is ready!
Option 2. You will need: grosgrain ribbons white, red and blue colors, hair clip, rhinestone, beads, lighter, glue gun, needle, thread, scissors.
Manufacturing:
- Cut a strip 4 cm long from a white ribbon, 3 cm from a red ribbon, 2 cm from a blue ribbon, and scorch the edges of each ribbon with a lighter.
- Now you need to bend a piece of tape of blue color, after - red, putting a smaller ribbon into it, then bend the white one and put both previous ones into it.
- At the point of connection of all the workpieces, you need to grab the edges of all the workpieces with a needle and thread. In the same way, you need to make 8 more petals. Then sew all the petals together at the junction of the petals, and glue a circle cut from ribbon to the center.
- WITH reverse side Glue the flower onto a hair clip with glue, and the flower itself and its middle can be decorated with beads.
Option 3. You will need: grosgrain ribbons different lengths, thread, needle, glue, elastic band or hairpin, bead.
Manufacturing:
- First you need to decide on the size of the bow and the width of the ribbons themselves. To do this, you can cut a template 10 cm wide from cardboard, and make a slot in the middle of the cardboard. Around this template you need to wind the tape several times, and at the end of winding its ends should point towards the different sides. The number of turns of the tape will depend on the desired number of loops; the ends must be secured with clothespins.
- Now the tape should be sewn through the slot in the cardboard, the workpiece should be removed and the thread should be tightened;
- You need to make more bows from ribbons of a different color and size, and then place them one on top of the other and secure with glue or a needle.
- The middle of the bow can be decorated with rhinestones or simply wrapped with ribbon. After this, the bow on the back side only needs to be attached to an elastic band or hairpin!
Kanzashi hairpins: exquisite DIY decoration
Kanzashi is a hair ornament common in China and Japan. Nowadays, such decorations are becoming popular among brides and people whose specific activities involve wearing a kimono. In Russia, women love kanzashi as an everyday accessory; they are sold in stores in a large assortment. But you don’t have to buy such a decoration; you can make it yourself at home!
To make such a decoration you will need: ribbon, tweezers, scissors, pins, a candle, a needle and thread or glue, a base for a hairpin, and beads for decoration.
- The tape needs to be cut required quantity squares. Each of them should be folded in half, and then in half 2 more times.
- The corner of the tape needs to be cut off and scorched over the candles; of course, you don’t have to do this, but then the angle will turn out to be very high.
- In the same way you need to do required amount petals and connect them together with thread or glue.
- Now all that remains is to decorate the middle of the flower with rhinestones, buttons or any other decoration, connect it to the base and that’s it - you can decorate the hairstyle of any fashionista!
DIY hair clips: master class
Hair clips are a wonderful decoration; they can emphasize the individuality of the chosen image! You don’t have to go shopping to find the right accessory, because you can make it yourself! In addition, you can make it together with your daughter or niece, because this activity is incredibly interesting!
The long-awaited spring has come, followed by a long, warm summer, which means it’s time to start making DIY hairpin. Every girl knows that with the help of even a simple hair accessory you can perfectly complement your look, especially when it comes to exclusive jewelry. Today you will find a real kaleidoscope of master classes on making jewelry in several techniques, which you can master and delight yourself and your loved ones with new hairpins, elastic bands, combs.
DIY hair clips
DIY hair clips can be done not only to save money, although this reason is also quite significant. First of all, it is self-production, for example, allows you to maximally select an accessory for clothing by color, texture, model, because in search the desired product in stores it can take much more time and effort.
If you think you have to learn, how to make hairpins with your own hands it is very difficult and it is for this reason that you are afraid to even try, then this is wrong. Of course, there is no need to immediately start with complex products, no matter how beautiful they may seem to us, but you can find them in any technique simple circuits And step by step guides, which will allow us to cope already at the initial stage. As a base for most pieces, you will need to use ready-made accessories from inexpensive hairpins, or find something in your collection that you no longer wear and update it. You may need clamping mechanisms, simple bobby pins, undecorated elastic bands, as well as combs and tucks. All this can be decorated very beautifully using simple improvised materials that you probably have in your home.
First DIY hairpin master class and dedicated to the most simple products. To decorate an ordinary pin, you will need a small piece of red felt, as well as any decor that you like. These could be items purchased at a handmade store or gift wrapping, buttons, beads, dried flowers. First, we cut out two identical felt blanks to fit the outer edge of the ovals. Future decor must be glued or sewn onto one of them. Apply the mechanism to the second and mark a place for the cutout under the wide part. The cutout is needed to thread the lock through the fabric. After this, we connect both parts together, gluing the edges with hot glue or sewing with threads; excess fabric can be trimmed with scissors. As a result, in fifteen minutes of work you will receive a new bright accessory for yourself or your daughter.
DIY ribbon hairpins It's not any more difficult to do. You just need to prepare a sufficient number of prepared petals. You can take a wide satin ribbon and cut it into square pieces, which are then turned into circles. To create the jagged shape that is characteristic of flowers, we will use heat on the edges of the candle. Thanks to the properties synthetic fabric, it begins to melt under the influence of temperature, the edges are sealed and take on a twisted appearance. We need this so that the edges do not fray and the threads do not come out of them. So, we have the prepared petals ready, so as not to fuss with them for too long, we simply stack them on top of each other and sew them with threads as shown in the photo, in five places. In order to disguise the junction and give the hairpin an additional highlight, we decorate the middle with embroidery made of transparent beads. Now that the luxurious (and completely uncomplicated) flower is ready, glue it to the base. This way you can do enough large collection all colors and sizes to match any of their summer sundresses.
DIY kanzashi hairpins
special large group make up among all Japanese technology kanzashi. She is a close relative of technology modular origami, but the parts that make up the overall craft, the modules, are made not of paper, but of satin fabric. DIY kanzashi hairpins They are almost always made in the shape of flowers, look very feminine and are suitable for any special occasion.
For a festive hairstyle, for example, for a New Year's ball, you can use various accessories decorated using this technique. We have already learned how, and now you can practice making a hairpin with a cascade of flowers. However, if this option seems too complicated to you, you can not do the entire composition, but only its central part; this will be quite enough for the overall image.
Having mastered the most difficult part in creating DIY kanzashi hairpins (video you can find a lesson online) - making identical satin corners, you can create products according to your own sketches, because all the parts are connected to each other in the same way children's designer. You can easily combine colors by inserting triangles into each other to create two- and three-color petals. Such as in the example presented are additionally decorated with pearl beads, which makes them look much more elegant.
DIY elastic band clips
However, you can work with atlas at a less professional level, if you don’t take it as a basis floral motifs, and bows. To learn to do DIY rubber bands, similar to the example given below, you only need to be able to tie bows beautifully, and find three pieces of different material that match each other in color.
At the first stage, we tie the ribbon into a bow. But we will do this using a cardboard rectangle so that the bow is even on all sides. We make three full turns of satin ribbon around the rectangle, carefully remove the cardboard, and in the middle of the turns we sew the fabric with thread, straightening the ends in different directions. Using the same technique, we need to make another bow, but from a thinner braid. Between these layers you need to make another one, but if it is also a bow, the elastic will turn out to be too voluminous, so we just put the pink ribbon crosswise and sew it on. Don’t forget to treat all the tapes that are part of the craft with a lighter to seal their cuts.
If you know which fingers to hold the hook with and are familiar with the designation of the basic loops, then you can master the next rainbow elastic band. It is called rainbow because it consists of seven parts, each of which is made in one of the colors of the rainbow. However, you can, in your own version, both reduce the number of layers and change their shades. The knitting pattern shown above is the same for each part; the same hook size and thread of the same texture are used.
And these are so red DIY flower hair clips can make an excellent set with scarlet felt pins, which we have already made above. For them you will need fabric of any texture, from which we cut out circles, five pieces of the same size. You need to fold each of them in half and sew it with a basting stitch along the edge, then pull the thread, gathering the fabric. On the same thread you sew the second petal and also gather it together. And you repeat this until all five petals are on the thread, after which you can close the flower and fix the thread. To close the hole in the middle, sew a button onto it contrasting color, and attach the entire structure to a pre-purchased red elastic band.
How to make a hairpin with your own hands
Among all the master classes dedicated to how to make a hairpin with your own hands, there are many that are based on interesting techniques and materials. Luxurious hair decorations are obtained when basic elements are decorated using cold porcelain. This type of modeling allows you to create real masterpieces in miniature.
In the example you can see such a craft, which is created from thin copper wire and pieces of molded material. In order for such a craft to last longer, you need to choose a high-quality composition that does not require artificial drying And complex processing. To complement the decoration, it is often equipped with elements of fabric, rhinestones and semi-precious stones, glass.
If such beauty is created with the help of modeling, then those who know how to handle beads should even practice making unusual hair clips. In this case, the product is crafted in several stages. The first of them involves the actual process of embroidery, which you can develop according to your own sketches. Even the finished element must be strengthened, and we will use thick paper as such a reinforcing layer. The third, final layer should be some very dense and durable material, ideally it could be a piece of dark suede or leather. All three layers are glued together, leaving intact the structural holes necessary for the mounting stick. As it, you can use a small decorative sushi stick coated with enamel or varnish.
Using not embroidery, but classic beading, you can make volumetric flower, which will keep its shape well due to the presence of a wire frame. Good to use for similar DIY hairpin video lessons so you can see how the elements fit together.
DIY hairpins photo
And a couple more manufacturing examples beautiful hairpins with your own hands, photos of which are presented below. This is another example of modeling, only in this case it will be decorated with an elegant hair comb, which is perfect as a formal accessory.
And the last example is lush roses, which are made from unusual material, which is called foamiran. This synthetic material based on ethylene, which has excellent “craft” characteristics - it is very easy to work with, it is durable, strong, and safe.
The main element of the hairpin is very similar to paper, but it is made of foamiran. To give the desired shape its edges need to be heated using the sole of an iron and a wooden skewer (so as not to burn your hands). Adding color to foamiran is also easy - you need to clean the lead and rub it into the surface of the petals with your fingers.