The interior of the hallway should not be given less attention than other rooms, because this is the first thing guests see. Very stylish look gives fake diamond, which is used as the main material or as an additional accent. Create original design you can do it yourself, since finishing the hallway with decorative stone has a fairly simple technology.
Before you start work, you need to choose the right finishing material. Artificial stone is made from concrete and gypsum with the addition of dyes. Both types have their own advantages and disadvantages, so it is better to study their characteristics first.
The advantages of concrete products include:
Walls decorated with such stone can be easily cleaned of any dirt, and the worn surface can be quickly restored with paint. If you accidentally touch the finish with something hard, there will be no marks left on it and no cracks will appear.
Flaws:
- heavy weight;
- high price;
- processing complexity.
To cut individual fragments when laying, you will need a grinder and a diamond wheel, as well as some effort.
Advantages of gypsum coating:
This stone is chosen for finishing plasterboard walls, which cannot be subjected to heavy loads. If you can’t find the right color, there are unpainted products on sale that you can paint at your discretion.
Flaws:
When dirty, this finish should not be wetted or rubbed vigorously so as not to damage the surface. Treating the stone with a special impregnation or acrylic-based varnish will help to avoid such damage. There is also gypsum stone with a polymer coating on sale - it is a little more expensive than usual, but it is not at all afraid of moisture.
If you wish, you can make a decorative stone on your own: for this you will need a plastic or silicone mold, a dry plaster mixture, and coloring pigments. Buying all this is not a problem, in every hardware store big choice mixtures and forms. Making finishing materials yourself takes more time, but saves money on repairs.
Preparation for finishing
First you need to calculate the amount of material. If the stone will cover the entire area of the walls in the hallway, you should subtract the area of the openings and add 10%. If the decor will be located around openings, niches, in separate fragments on open walls, draw a rough sketch of the decoration and take measurements of each area. Then add up the area and add 10-15% for trimming. When purchasing material, you should remember that the amount of angular stone is calculated in linear meters, and correct form– in square.
Additionally you will need:
Artificial stone can be attached using liquid nails, cement-based or gypsum-based glue. The glue consumption must be indicated on the packaging, so when purchasing, you should know exactly the finishing area and take it with a small margin.
If you use gypsum stone, you will need a special miter box with high sides for cutting.
When everything you need has been purchased, you should start preparing the surface.
Step 1. Dismantling the coating
If the stone covers the hallway walls completely, the old coating is removed completely to the base. If separate areas are intended for decoration, the coating must be dismantled very carefully. On the wallpaper, mark the boundaries of the finish with a pencil and carefully trim it with a utility knife, leaving a margin of 1-2 cm wide for stones. The wallpaper glue is soaked in water and removed with a spatula, and the walls are thoroughly washed. They also remove the paint if it is peeling or cracked, and clean off any loose plaster.
Step 2. Leveling the walls
The stone must be laid on a level smooth surface– this will facilitate the work process and increase the strength of the decorative coating. Therefore, all small cracks, gaps, and depressions are filled with putty, and if there are differences of more than 5 mm, it is better to plaster the entire area. Particular attention should be paid to doorways: along the perimeter of the frame, deep cracks, for the sealing of which it is recommended to use a cement solution.
Step 3: Priming
Dry walls must be lightly sanded to smooth out the unevenness of the puttied areas, and then wiped with a rag to remove dust. After this, the surface is treated 1-2 times with an acrylic primer. If there is wallpaper around the perimeter of the areas to be treated, the primer should be applied so as to cover an edge 1 cm wide - what will be hidden under the cladding.
Decorative stone has uneven edges and consists of tiles different sizes. Laying must be done in such a way that tiles of the same size are necessarily interspersed with larger or smaller fragments, and the seams do not coincide either horizontally or vertically. This way the coating will look most natural and attractive. To understand how best to join the stone, you need to lay out the tiles on the floor, selecting the fragments in a certain order.
Step 1. Preparing the glue
Pour dry glue into a container of water and stir well. The ratio of water and glue is indicated on the package, so there is no need to mix “by eye”. Failure to comply with the proportions reduces the strength of the connection or increases the consumption of glue. It is best to mix with a construction mixer, then there will be no lumps left in the mixture. The finished glue should be homogeneous and resemble a thick paste in consistency.
Step 2. Laying the first row
You need to lay out the tiles from the corner of the wall, and this can be done both from above and from below. When laid from top to bottom, the stone is less dirty with glue, and the coating is more accurate. If only the area around the opening is covered, start from the corner of the door. For convenience, the wall can be marked by level with horizontal lines every 10-15 cm.
Now you can start installation:
- take the first fragment and apply a layer of glue 5 mm thick with a notched trowel;
- apply the tiles to the wall and align them according to the markings;
- gently press to the surface, wipe off excess glue;
- choose a second tile that differs in size, cover it with glue and attach it close to the first.
Between the fragments you can leave seams of 5 to 8 mm, especially if the stone is large.
After facing, the joints are filled with putty and jointed, which makes the masonry more attractive. Small tiles can be attached closely, the main thing is that the joints do not coincide.
Step 3: Finishing the corners
To cover internal and external corners, you can purchase special corner tiles, which are more expensive than usual, but significantly simplify the work process. If your budget is limited, you will have to adjust the stone yourself using a grinder or a hacksaw. There are 2 options here - laying the stone overlapping or grinding the edges at an angle of 45 degrees. When using the first option for external corners, the open ends must be filed and tinted, otherwise they will stand out too much. In the inner corners, both ends are closed, so processing is not necessary. The second option is more suitable for gypsum products, which are convenient to cut using a miter box.
So, first determine required quantity fragments, cut them from a certain side, process the sections with a file. Next, the stones are smeared with glue and alternately attached to the walls on both sides of the corner, carefully aligning the joints. When the vertical corner is laid out, you can expand the masonry onto the walls.
Step 4. Decorating the edges of the masonry
The edges of the masonry will look more attractive if the tiles are cut beautifully. The surface of the decorative stone has a clear texture, which makes it easier to trim the outer fragments. You should cut with a hacksaw directly along the contour lines to ensure the most natural cuts. All cuts must be sanded sandpaper.
Step 5. Sealing joints
Dilute the gypsum putty and carefully apply it to the joints, corners, and around the perimeter of openings and switches. For convenience, you can use a thick bag, for example, a milk bag. One edge of the bag is cut completely, and a small incision is made on the other side. Fill the bag with putty mixture and squeeze out an even thin strip onto the seams. If the solution is applied with a spatula, you should immediately wipe off the excess from the surface of the stone to avoid drying out. After filling the joints, the putty is rubbed with a damp foam sponge and left to dry.
Step 6: Finishing
The dried putty has White color, and therefore the treated areas will stand out against the background of the stone. Get rid of light spots Paint will help: in a small container, dilute the pigment to match the color of the main coating and use a small brush to paint the putty areas. When the paint dries, the stone is coated with acrylic varnish. In places where the walls are constantly touched, it is better to apply varnish in 2-3 layers.
To make the coating more voluminous, you can highlight the edges of the masonry with golden or bronze dye. There is another option: a coating of the same color, but more saturated in tone, is applied to the artificial stone at an oblique angle. In addition, you can use lighting: light directed from above or from the side makes the masonry much more textured and clearer.
| Calculation of decorative stone | Formulas | Explanations |
|---|---|---|
| Calculate the surface area intended for cladding with artificial stone | S (wall) = AxB | A – wall length, B – wall height |
| Calculate the surface area that the corner elements of the decorative stone will occupy | S (angles) = Lx0.2 | L – angle length (linear meters), 0.2 – coefficient |
| Find the total area occupied by all corner elements | S (angles total) = S (angle 1) + S (angle 2) | - |
| Calculate the area of window and door openings | S=AxB | A – window/door width, B – window/door height |
| Calculate the surface area intended for facing decorative stone, taking into account the area occupied by corner elements, window and door openings | S (stone) = S (walls) – S (corners) – S (windows/doors) | Increase the resulting area by 10% |
| How to calculate required amount corner stone elements. | Measure and add the height of the corners to be faced with decorative stone. L (total angles) = L (angle 1) + L (angle 2), etc. Increase the resulting length by 10% | L – length of corners (linear meters) |
Video - Decorating the hallway with decorative stone
Wall decoration with decorative stone goes well with wallpaper. This option is suitable both for the interior of the hallway and for decorating the walls in the kitchen space. For repairs, two types of stones are used: they are created from artificial concrete or gypsum.
Wallpaper and thin-layer decorative material for kitchen cladding.
Features of the material
It is much easier to work with artificial gypsum stone because the required form can be easily cut. However, concrete elements cost almost 2 times less. For many, this factor is decisive in the process of choosing a finishing material.
A bright solution using artificial slate of different tones. The photo shows the hallway and part of the kitchen.
Advantages:
- The cost of repairs is less when compared with cladding with natural elements;
- The appearance of the material is as close as possible to the natural texture;
- The weight of artificial tiles is insignificant, so the walls do not experience significant load. In addition, lightweight elements are quite easy to lay, creating a flat surface;
- Due to its ecological composition, it can be used for interior decoration;
- Fungus does not form on such a stone, since the rotting process is not supported;
- Easy maintenance during operation;
- High strength indicators. This factor is important, because the kitchen and hallway are the most visited parts of your home;
- A large selection of shades will allow you to effectively combine stone with wallpaper.
Flaws:
- Price. Finishing with decorative stone material is not an economical option;
- For many, the disadvantage is the cold surface of the elements;
- The material is exposed to high temperature, therefore, when choosing, it is important to take into account the purpose of the room and operating conditions.
1. First, you should prepare the walls in the room, namely, clean the surface of any remaining plaster and wallpaper.
2. For repair work you will need household tools;
3. Before starting work, it is necessary to plan the lighting system and organize the electrical wiring.
4. The surface is leveled using putty or plasterboard. Drywall is chosen if LED lighting is planned - the gap between the sheets and the wall allows the devices to be built in.
5. For installation, use a special adhesive composition, putty solution or “liquid nails”. The most popular option is laying tiles with glue.
6. If necessary, the seams between the elements are filled with mortar.
Photos of completed projects
Combined room decoration.
Bar counter separating the hallway and the kitchen-living room. Decorative brick was used for cladding.
The decoration of the hallway walls is wallpaper and slate.
Plain wallpaper and slate were used to decorate the kitchen.
The interior color scheme of the hallway matches the colors used in the kitchen.
Cobblestone cladding of part of the bar counter and wall surface. The artificial material is complemented by pistachio-colored wallpaper.
To decorate the apron and column areas in the kitchen, we chose a collection of bricks with different tones.
Highlighting the dining area in the kitchen interior using a brick wall.
Light shades in the design of the kitchen-dining room space.
Palette pastel colors in the hall.
Rich colors in the hallway design using figured slate.
The place in the house, looking at which guests draw conclusions about its owner, is the hallway. It is not only clearly visible, but is also the room into which street dirt is primarily carried. Therefore, when arranging it, the smallest details are taken into account, including interior decoration.
Hallway interior with stone 
Stone in the hallway 
Hallway interior with stone
One of the oldest finishing materials is stone. Its elements can create an atmosphere of comfort and security, and designers, in turn, offer many options on this topic. Having decided to use this material in the interior of the hallway, the question becomes reasonable: which stone to choose, natural or artificial?
By caring for his loved ones, a person pays tribute to nature. However, this approach has its drawbacks.
- Price. Like everything organic, natural finishing material is relevant only for people with high incomes.
- Natural stone is susceptible to external influences.
- This great option for flooring.
Hallway decor with stone 
Stone in the hallway Advantages of decorative stone
In the era of the development of high-precision technologies, people have learned to create stunning imitations natural materials. Decorative stone is an excellent alternative to natural stone. Manufacturing technology gives it a variety of textures, shapes and even colors. Such a stone will help create a retro style in the interior or, conversely, make it trendy, for example, in a loft style.
Artificial analogs have a number of advantages.
Different stone in the hall 
White stone in the hallway Types of decorative stone
Manufacturers of such decor offer a wide range of products. Therefore, before you go to the store to buy something, you need to at least understand its varieties.
Decorative stone is distinguished by its base:
- cement base;
- gypsum base;
- agglomerate;
Decorative stone on gypsum has the lowest cost. Due to its low weight, it is ideal for installation on drywall. However, this material is also the most fragile, and also has increased hygroscopicity, which leads to deformation when exposed to moisture. And this, although insignificant, is a drawback, since the hallway needs constant wet cleaning. This nuance can be corrected by additionally treating its surface with special protective impregnations or acrylic varnish.
White stone in the hallway decor 
Hallway design with stone Cement-based decorative stone is the most durable material with a long service life. It is not afraid of the most aggressive cleaning agents, and even metal brushes. Therefore, it is used for finishing not only the interior, but also the exterior. Such a surface can be easily restored with regular painting.
Cement-based material also has a number of disadvantages. Compared to a gypsum specimen, it is heavy and difficult to process. To cut it, you need a grinder with a diamond blade.
To produce high-quality material, high-grade cement is used. And to obtain a durable material, you need to withstand the product not less than a month. The brand of cement, plus the conditions and shelf life of the finished product affect its final cost.
Hallway design with stone 
Beautiful stone hallway decor addition For the agglomerate base, natural rocks. Quartz, marble, granite, and other similar rocks are crushed into fine chips, after which polymer resins and cement are added to them. To achieve a particular shade, coloring pigments are added to the resulting composition.
In addition, there are four additional subspecies, differing in their basis. Ceramics have a clay base that is fired in kilns. Stone made of sandstone is elastic. Composite tiles are a product consisting of thin layers of marble, granite or onyx.
Decorating a hallway with stone 
Stone decoration Decorative stone is divided into varieties according to the method of its production:
- brick tiles attached appearance similar masonry;
- to create a specific composition, mosaic elements are used, which are selected by size and color;
- sawn samples are distinguished by their geometric shapes and untreated front surface;
- the tiles replicate polished stonework;
- rubble stones look like pebbles, and even whole boulders;
- chipped products will help give the walls the structure of untreated rocks;
- The most popular are fantasy specimens that only superficially resemble stones, but are impossible to find in nature.
Within a small hallway, designers do not recommend using several types of stones at once. It is not for nothing that this material is compared with natural fur, which in one finished product there should be no more than two types.
Stone decoration in the hallway What are they decorating?
Decorative stone in the interior of the hallway looks advantageous and respectable. However, there are a number of recommendations that must be followed to avoid an overabundance of decorative elements.
In the interior of a small hallway, only its individual parts are distinguished. Decorating the walls entirely is advisable if the front door has expanded dimensions. Otherwise, decorative stone should not be used as a dominant element. They decorate only part of one wall.
Highlighted corners, window openings, and the door itself look ideal. The material can be used if there are niches and depressions in the room. In terms of design and practicality, it is recommended to use stone trim around the baseboards.
Beautiful stone in the hallway 
If there is a mirror in the front door, it must be highlighted. This will help visually increase the parameters of the room. Furniture items are also emphasized.
To make the cladding look natural and relaxed, the stone is laid out in a random direction. An important aspect is the choice of colors. For a small hallway, preference is given to light colors. A difference of 1-2 tones with the main color of the walls is acceptable.
Decorative stone and central lighting in the hallway are practically incompatible. The finish looks great under focused, directional light. Additionally, original sconces, floor lamps, elements of scattering light, everything that gives a play of shadows are used. The light is directly directed onto the stone surface.
Decorative stone can be combined with any material, be it wood, metal, glass or paper, and the resulting design will be enhanced by greenery. Properly selected and arranged plants look especially good. If you have artistic inclinations, then the stonework can be framed with drawings. If you lack imagination and experience in the decorative arts, you can always use the services of a designer.
Beautiful stone decoration in the hallway 
Stone in the hallway What to consider when purchasing and installation rules
Before you go to the store, you need to have a general idea of the final appearance of the hallway - a sketch of the project. Take accurate measurements and determine the total area of the surface to be covered. Its shape is taken into account, as well as certain characteristics, be it a corner, a flat wall or a niche. The surface structure can be plasterboard, concrete, brick, wood. The installation method is also taken into account. The material is taken based on how much is needed, plus 10 percent of the total amount, since damage to elements is inevitable during operation. You need to purchase decorative stone immediately. If you have to buy more, there is a chance that you will come across products in other shades.
The installation process itself is identical to finishing tiles. The stone is attached to the surface using glue or cement. To create a seamless coating, a seamless method is used, but laying with a seam is not suitable for all rooms, but it has the advantage of saving material.
Gray stone in the hallway 
Black stone in the hallway Advice. Slate or sandstone elements are ideal for seamless masonry. For finishing with a seam, rubble stone or fragments of brickwork are suitable.
Leveling the surface is the first stage of the process. It needs to be prepared for better bonding with the decorative material. For a concrete wall, only grouting is necessary, while in brickwork you will have to remove unevenness using plastering. For gypsum surfaces, the main condition is their fixation and priming. If the walls are covered with wallpaper, the finishing areas are carefully cut out using a stencil with a small margin. For maximum naturalness, decorative fragments should be laid in a chaotic manner.
To adjust individual elements to fit them required sizes and forms, use tools:
- emery;
- pliers;
- file.
Marks are made with a pencil on the surface to be finished. The outer corners are decorated with an overlap, the edge angle is approximately 45 degrees.
Stone decoration in the hallway 
Stone in the hallway For seamless masonry at the end of the work, it will be enough to correct small defects using a solution consisting of water, acrylic-based varnish and color. In order for the masonry to “sparkle” with reflections when illuminated, you can apply a glitter coating.
The final stage of finishing with a seam is grouting, which is done no earlier than 24 hours. During this time, the adhesive or cement base will dry completely.
Small tricks
When deciding to use decorative stone for decoration, you need to take into account the age of the room. The older, the better. After construction, such finishing work is carried out no earlier than 6 months.
Photos of stone in the interior in the hallway will help you choose ideas for decor.
During the work process, the surface and decorative fragments are periodically moistened. This fact is especially important for the seamless method.
Video: Decorating the hallway with stones from egg trays
50 photos of hallway design ideas with stones:
In this article we will talk about decorative stone in the interior. 141 photos of the hallway, kitchen, living room and balcony are included in the form of special galleries.
Conventionally, the article is divided into two parts.
- The first section contains tips on selecting finishing materials for the interior, a table of compatibility with different styles.
- In the second chapter there is information for those who want to know how to decorate a hallway with decorative stone and wallpaper. Photo galleries with design are attached. In addition, we will discuss the use in the kitchen, living room and balcony. All information is accompanied by examples of designs in the form of images.
To begin with, let’s define what a decorative stone is in the interior. You can see a photo of this facing material for interior decoration, made from a special mixture that is cultivated on concrete, on the pages of the current article.
Externally, the stone resembles a real one, and the texture, color and density can be different - it is possible to imitate shell rock, marble, travertine. Essentially, as a raw material, this type of cladding is a tile, because one side is always flat to be attached to the surface.
Thanks to modern technologies There are a huge number of types of material on the market. On sale along with good stone for sale a large number of fakes In order not to fall into the clutches of scammers and not to purchase low-quality goods, we recommend that you pay attention to:
- cost of goods. If you see that some models are significantly cheaper than the market average, there is a very high probability that they are made from low-quality raw materials. This affects the service life of the stone;
- painting individual cubes. Pay attention to samples of the product in the store: paint from some cubes should not spill onto others, and should not have scuffs or smudges. All elements must be painted individually. If this is not the case, then this is a low quality sample.
Important factors will be:
- Make sure there are no through holes in the stone. Their presence significantly reduces the service life of the product and is a manufacturing defect;
- correct geometry. Make sure the stone is level on all sides. Otherwise, the masonry will turn out to be crooked, even with jointing;
- slice The size of the largest particles should not exceed 5 mm. Otherwise, there is a very high probability of chipping during installation;
- back side with grooves. A good artificial stone has such elements with a difference of about 3-4 mm. They are needed for better grip.
Is it possible to glue artificial stone onto wallpaper?
Many people have a question: is it possible to glue decorative stone tiles to wallpaper? The answer, unfortunately, is negative, due to the unreliability of the wall covering. As a rule, most types are placed on a pre-primed surface.
If we talk about paper sheets, they are too weak structurally to hold artificial stone and get wet under the glue. Vinyl wallpaper has weak adhesion, so the trim will also fall off.
An excellent option is to combine artificial stone and wallpaper in interior design; their combination is quite acceptable.
The kitchen is a place where finishing materials need to be selected especially carefully. Vapors and splashes are very dangerous for walls, so decorative stone in the kitchen is a good solution.
- Before laying, it is necessary to prime the surface to increase its adhesion;
- for fastening, you can use tile adhesive or liquid nails, depending on the weight of the stone itself;
- After laying, it is best to leave the surface for 10-12 hours to dry completely.
Follow these rules:
- The kitchen is usually not a very large room. If you use decorative stone to cover all the walls, you will get something similar to a medieval dungeon. If you want to achieve this effect, then it is recommended to think about a niche with a live fire - it looks very impressive. If you want something more modern, then combine wallpaper and stone.
- For proper combination, it would not hurt to divide the kitchen into zones.
- The ideal option is to decorate the “kitchen apron” with rough raw materials - this is the part of the kitchen where cooking and washing takes place. Everything else can be covered with vinyl sheets.
24 kitchen ideas
Decorative stone in the interior of the kitchen, as well as the hallway, obeys the same laws - the room is small, so the excessiveness of the stone can somewhat complicate perception. For decoration, it is advisable to use light, positive colors - they are more friendly and appetizing.
Constant kitchen humidity can damage the coating to some extent.
In neoclassical style
Next to the window
The whole thing
Great combination
Wood and stone
With arch
Next to the windowsill
Backlit
Behind the sofa
With columns on the sides
Under brickwork
In light colors
Combined with living room
With gray furniture
With decorative plaster
With lighting
Space zoning
Combined with wood
With lacquered furniture
Bar counter
With patterns
In yellow
For several people
With kitchen Maria
Furnishing with decorative stone and wallpaper - a gallery of successful solutions
Here you can see how the kitchen is decorated with decorative stone and wallpaper. Photo galleries of options reflect a large number of ideas that our specialists were able to find.
Combination of white and gray
Corner joint
Panel
With stretch ceiling
In the kitchen
In open space
With light furniture
In Brezhnevka
With tiles on the floor
Provence style
With a flat texture and paintable wallpaper
With frame
With shelves
With column and electric fireplace
Decorating the corridor with decorative stone
There are two ways to decorate walls using decorative stone in the interior of the hallway (photo below) - use only one cladding, or combine it with wallpaper various types and structures.
The greatest demand began to be for those stones that imitate the texture of slate and brick. Marble and dolomite are also popular. The great popularity of such an interior came from the loft culture - brickwork there is considered the most competent visual solution.
There is such a decorative stone in the hallway:
- gypsum (cast or molded);
- cement;
- brick (ceramic);
- agglomerate.
It is not for nothing that the hallway is considered the face of the apartment - it is the first thing that any person sees when entering the room. For her, it is best to combine shades - this is much more effective method creating depth of color and, accordingly, volume of the room. It is advisable to use neutral colors, such as brown, beige; they will definitely fit into the interior design of the hallway with artificial stone.
You can experiment with coating, which is recommended to be darker than the main stone. Alternatively, selecting the outline around the edges pigment method(in this case, when a light source hits the pigments, they will begin to shimmer).
Examples of hallway decoration - photos and interior design
In this section you can see how to properly use decorative stone in the hallway - photo galleries with images demonstrate this.
Small area
In combination with parquet
Closet
In light colors
With stairs
Under a stone with relief
In a small room
In a long passage
Combination with wallpaper in the hallway
To make finishing the hallway with decorative stone and wallpaper, as in the photo below, easy and the results lasting, you must first prepare the base. To do this, old finishing materials are removed and irregularities are removed. The surface is treated with a primer.
Before starting work, lay out the tiles on the floor so that there are no sudden changes in color and density. Thanks to this, you can place them on the wall faster and with the most attractive effect.
In order to glue the tiles, liquid nails are used. Cement-based glue is also used, but working with it requires special care (stains and smudges may remain).
door passage
In combination with non-woven fabric
In the corners
Elongated corridor
Spacious corridor
Corner
Next to the stairs
With canvases for painting
Living room design rules
Decorative stone in the living room – great addition both the already established design and the basis of a new visual solution. Before you choose suitable breed for finishing, you need to familiarize yourself with its technical characteristics.
Designers advise adhering to the following rules:
- combine different breeds in one room is not recommended - even if one room is zoned. Use one type of stone, combining shades;
- lighting plays a key role - the more illuminated the living room, the more experimentally you can approach the saturation of the walls;
- plain elements are diluted with inserts - this way they look more interesting;
- It is not recommended to use finishing if stone floors are being made - excessiveness does not look attractive.
The material is adapted to temperature changes and is not flammable - so if there is a fireplace in the apartment, then cladding around it is appropriate.
Other advantages of cladding:
- ease;
- environmentally friendly and non-toxic;
- ease of installation;
- the ability to choose different design solutions.
One of the undeniable advantages is maintainability. There are no scratches, chips or other defects to worry about. The use of a wide range of pigments and artificial polymer components makes it possible to obtain an almost unlimited range of colors.
Artificial stone, being a mineral-polymer material, does not react with water, air, or solutions of acids and alkalis. It is not predisposed to the development of bacteria and does not require special care. Cigarette stains or scratches that occur over time can be quickly removed by sanding and polishing.
In the interior of the living room - successful ideas and solutions
We invite you to look at the room design options. In this section we show what decorative stone can be in the interior of a living room. Photos were carefully selected by our experts.
Medieval style
Open space style
In the English manner
Budget option
Venetian stone
Under textured masonry
With built-in plasma
Vintage style
British design
Beige and white tones
Paired with a gray sofa
Black and white style
Combination with wallpaper in the hall
An excellent option is to decorate the living room with wallpaper. Proper combination allows you to achieve an atmosphere of comfort and hospitality.
Next to the table
Under masonry with suspended ceiling
In light brown style
With brown curtains
In blue tones
In the chalet
Portal design
Country cottage
In red
With parquet on the floor
Before decoration
United rooms
Design project
Empire style
Balcony decoration - photos of beautiful designs
The balcony is no longer a place for rubbish - it is made into a wonderful relaxation area in which you can relax comfortably and pleasantly. To do this, experts recommend finishing the balcony with decorative stone. Photo ideas and interesting options, carefully selected by us, are attached as a gallery in this paragraph.
Decorative stone in the interior of a balcony is exclusively additional detail registration It is undesirable to completely decorate such a small room, even if it is well lit by the sun, since in the end it will look too small. Painted walls can be diluted with stone inserts of any density - it looks unusual and stylish.
We invite you to familiarize yourself with the most good options balcony finishing. Images are clickable and enlarge to fill the entire screen.
Together with double glazed windows
Around the windows
IN modern style
Window sill repair
Two brick colors
Place to sleep
To read a book
Green corner
Finishing
With tiles on the floor
Corner wall
With a lamp in the ceiling
Selection tips depending on styles - table
| Name | Hue | Length, height, thickness, cm | For what interior? | |
|---|---|---|---|---|
 | Gray beige golden | 48.6x9.8x4.6 29.2x9.8x4.6 19.3x9.8x4.6 | Classic, modern, Mediterranean | |
 | Beige gray golden | 48.6x9.8x4.6 29.2x9.8x4.6 19.3x9.8x4.6 | Mediterranean, Venetian, modern classic | |
 | Sand brown | 24x7 | Modern, country, loft | |
 | Beige, very light | 19x5x1 | Modern, loft | |
 | Golden beige with tan marks | 23.8x6.9x1.3 | Modern, country, loft |
30 more photos in expensive apartments
Additionally, we have prepared several more options for photographs of decorative stone for your inspiration. We hope that everyone will find what is closest to them.
In a big house
Modern classic style
In the cottage
Bathroom in the country
Trim around TV and fireplace
Egyptian style
WITH purple flowers
In the recreation area
In bathroom
Loft style
In a country house
With built-in fireplace
In a modern house
In an antique house
On the open terrace
Painted black
Dining room for 5 people
In the style of Sherlock Holmes
Jacuzzi
Wall in the bathroom
Sauna and shower
With exit to a balcony
Study
Country house
Overlooking the forest
City life
Column next to the balcony
Above the stove
Work zone
In a studio apartment
Decorating the hallway with decorative stone very popular now . It is relatively easy to process , it looks modern, fits into almost any design, and, unlike natural stone, has less weight and lower prices. You can decorate the hallway with artificial stone yourself, using it as the main type of covering, or as an original small accent in a certain area.
Types of finishing (decorative) stone
To make artificial decorative stone, concrete or gypsum is most often used. Externally, the finished surface made of gypsum or concrete differs little from each other, both stones can have any texture and color scheme, depending on the selected style.
- Concrete based stone very durable, can have a wide variety of colors, since all kinds of dyes and other substances are added to concrete during production. Concrete stone is moisture resistant, fireproof, very durable and easy to clean.
- Plaster stone You can easily make it yourself, but it is less durable than concrete and is not moisture resistant without special treatment. But such a stone is easy to process.
When choosing a decorative stone, first of all you need to take into account your capabilities, taking into account that you will do all the work yourself. To process gypsum stone, you don’t need a grinder and a diamond disc, and if you buy a concrete stone, you can’t do without them.
WITH decorative stone finishing It will be much easier to work from gypsum: it is easy to file, sand, putty, paint, in a word, you can create a stone interior in any style. In addition, mechanical damage can be easily removed from the plaster if it occurs during the work process. Gypsum stones weigh approximately two times lighter than concrete ones. This point is important mainly if you decide to glue the material to drywall.
If the repair is done on long years, then it is still better to prefer concrete, since it is not afraid of moisture and is fireproof; it is even sometimes used to decorate fireplaces.
1.Preparation for finishing
First of all, you should calculate the total amount of materials. If the stones cover the entire walls in the hallway from floor to ceiling, then when calculating you need to exclude the area of all openings, and then add about ten percent. Before work, you need to have a complete understanding of exactly how the artificial stone will be installed, where the fitting of the joining parts will be made.
When stone decor is located around doors, various niches, and fragmentarily on walls, then an exact sketch of the upcoming treatment is first drawn, and after that all zones are measured. After measurements, you should add up the area, not forgetting to add 10 or 15 percent for trimming. The more carefully the sketch is thought out, the more you can save in the process of cutting stones. When calculating the required material, you should also take into account that the total number of stones of angular shapes will be calculated in linear meters.
You also need to prepare all the tools for work. First of all, these are grinders, especially if decorative concrete stone is used. If the material chosen is gypsum, you can prepare a regular hacksaw. In addition, you will need:
- regular and wide spatula (notched);
- a longer ruler and a simple pencil;
- building level;
- Rubber hammer for tapping already glued stones;
- a file and several brushes of different sizes;
- container for diluting glue;
- stone glue, varnish and acrylic primer;
- a construction gun or a thick bag for sealing joints;
- a syringe for applying grout and a cloth to remove residual adhesive.
In addition to the above, you need to take into account that the stone is laid both with jointing (for example, if a texture in the form of bricks is chosen) and without it. For example, a stone is laid “under slate” without jointing. If jointing is required, you need to select a dye in accordance with the tone of your decorative stone or prefer the “contrast” option. After purchasing materials, you can begin to prepare the surface.
2. Dismantling the coating
Preparing walls for painting usually begins with the complete removal of old coatings from the surface. Outdated wallpaper, peeling paint, and even more so, old tiles must be completely removed. The plaster can be left only if it adheres perfectly to the wall along the entire perimeter. If it crumbles, at least in several places, it is better to get rid of it by stripping the walls down to bare brickwork, wooden beams, or concrete surfaces.
If the project involves only partial application of stones, then the previous coating can be removed only where decoration is provided for according to the sketch, making an allowance of about two centimeters. When finishing is carried out in individual areas, the old coating should be removed with the utmost care. First, you need to mark the edges of the treatment on the wallpaper with a pencil. The wallpaper is carefully cut out using a stationery knife to avoid damaging it. The edge of the plaster or other hard layer can be trimmed with a grinder. If there is any glue left from old wallpaper, it needs to be soaked with water and then removed with a spatula. At the end of the cleaning, the walls are thoroughly washed several times.
3. Alignment of walls
First of all, it should be noted that finishing with decorative stone can only be carried out if the wall is perfectly flat. Otherwise, the wall will be fragile, and it will be very difficult to work on a curved surface. If the difference is more than five millimeters, then using putty you need to correct all the errors that the builders left as a “legacy.” After this, small cracks and small depressions should be carefully rubbed. Close attention should be paid to arches and door openings; cement mortar can be used to seal cracks.
Except wet method leveling the walls (using plaster), there is also a less labor-intensive dry method using plasterboard panels. By the way, you can also hide various communications behind them, and if the corridor is cold, then lay some insulating materials. However, drywall is only compatible with decorative gypsum stone; concrete material requires leveling the wall with plaster, since the partitions will not be able to withstand significant weight.
4.Primer of walls
When the putty has dried completely and completely, you can prime the surface. Before this, minor roughness on the walls should be eliminated by treating the surface with fine sandpaper. After all the dust has been removed from the corridor, you can coat the walls with two layers of primer. It is better to purchase an acrylic primer.
In the event that only fragmentary cladding is being done, then the allowance left on the wallpaper should also be primed. This work must be done properly; if the wall is poorly primed, the stones may subsequently fall off.
At this point, the pre-preparation process ends, and you can begin laying the facing material directly.
5.Stone laying
Remember that laying stone does not like fuss and haste, it is creative process. Before starting work, you need to consider the following:
- Decorative stone is usually sold in the form of tiles of various sizes, all of which have uneven edges. Experts giving advice how to decorate a wall with stone, It is strongly recommended to do the styling so that more or less identical fragments necessarily alternate with smaller or larger ones.
- You should try to lay the stone so that the seams do not coincide both vertically and horizontally.
Laying decorative stone is done in stages. First of all, you need to lay out the tiles on the floor, while forming a composition of stones of different sizes. In this case, your stone wall will look natural and organic. Professional craftsmen sometimes they don’t do this, they “feel” the stone in real life, but beginners need to first visually see the intended composition as a whole.
6.Glue preparation
Pour clean water into a prepared container, gradually add dry powder, kneading thoroughly until smooth. The proportions of water and powder are usually indicated on the packaging. For a uniform consistency and to avoid the formation of lumps, it is better to use a special construction mixer.
When diluting glue, you should not rely on “maybe”; you need to follow the correct ratio of powder and water, which is offered by manufacturers. As a rule, violation of these proportions affects the quality of the entire installation. If the mixture is too liquid, this will reduce the strength of the entire joint; it is difficult to work with a thick composition, and there may simply not be enough glue.
7.Laying the first row
You need to start laying the stone from the corner. You can choose any angle and move in any direction. In order to masonry had support, work is carried out from the bottom up. In the event that it is intended to cover only part of the wall, the area around the arch or door, and not its entire surface, work must begin from any corner of the arch or door. If, based on the sketch, markings are first made on the wall surface, then the work will be much easier. So, installation should begin in the following sequence:
- take a notched trowel and apply a 5 mm layer of adhesive to the first tile;
- place the stone on the wall according to preliminary markings;
- press very tightly and carefully remove excess glue (later it will be extremely difficult to do this);
- fix the second tile nearby;
- If the stone is not laid tightly, but with joints, then you need to carefully observe the required distance.
The entire above process should be repeated until the logical completion of the work. In the case when the entire cladding will consist of stones of different sizes, you need to monitor the sequence of alternation. But if you have previously laid out the rows on the floor, as recommended earlier, then there should be no problems.
8. Laying out the remaining rows
After the first layer has dried, you can begin laying the next row. It is worth noting that some brands of glue dry very quickly, and sometimes work can be continued almost immediately. As you work, do not forget to carefully form all seams horizontally.
Carefully ensure that the entire masonry does not fall to one side or is not in the form of waves. After the next row has been laid, you need to check the strict horizontality of your upper boundaries using a building level. Do not forget to properly remove excess glue, which will inevitably fall on the face of the masonry.
When using a seamless installation method, you must also carefully ensure that the glue is thin and even layer filled all connections from the ends. If the stones are quite thick, over 10 millimeters, then there is no need to rush to finish the work quickly and lay out more than four rows of masonry at once. Otherwise, everything may slide due to significant weight. This rule especially applies to concrete stones. You should wait until all the glue has set properly, and only then begin laying the next four rows.
9.Corner lining
It must be said that corners, both external and internal, usually receive various mechanical damage the most. For this reason, very often in the hallway the corners are laid out in fragments with decorative stone. This will not only thoroughly protect your walls, but will also original decoration the entire interior. It is better to place large parts of decorative finishing only up to the middle of the wall, otherwise there will be a visual “pressing” effect.
Before you start finishing with decorative stone, you need to purchase corner tiles, among other materials. Although they, as a rule, are somewhat more expensive, their presence will significantly simplify the entire process of further cladding. If for one reason or another this is not possible, then the tiles can be given the required shape using a hacksaw if the stone is gypsum, or a grinder if the stone is concrete. There are two generally accepted methods for laying corners:
- The laying fragments are simply installed overlapping. To ensure that the ends are not noticeable at the outer corners, they can be slightly filed with a file and carefully tinted. For an internal corner, as a rule, such processing is not necessary.
- All edges of decorative stones are ground at an angle (45°). This option is typically used for gypsum products that are simply processed.
It is necessary to closely monitor the normal alignment of all joints. Glue is applied to the previously prepared stones, then they are placed on both sides of the corner and pressed very tightly against the wall surface. After completing the formation of the corner, you can then continue laying the horizontal rows of the entire cladding according to plan.
10.Design of masonry edges
It must be said that the thoroughness of this work is very important, since the entire appearance of the finished masonry will ultimately depend on the accuracy of the completed edges. Stones for the edges of masonry around arches and door openings must be selected more than carefully. Perfect option- achieve the most minimal stone processing and trimming.
All edges sawn off with a hacksaw or grinder should be sanded with sandpaper and, if necessary, tinted, they should look beautiful and natural. All seams and small chips that have formed on the stones must be carefully repaired and masked.
11.Sealing joints
The joints that have formed between decorative stones are sealed either with putty or a special compound. To seal joints, it is best to use a construction gun, but, in extreme cases, a thick bag will do. It is necessary to fill with gypsum putty all the existing gaps that have formed between the fragments of the finished masonry. Excess should be removed quickly before this mixture dries.
Since hardened putty usually has a different color from decorative stone, you need to finish sealing the joints by carefully painting them over with paint. The shades of pigments need to be selected as carefully as possible.
12.Finish
The final touch in the work of covering the surface of the hallway walls with stone is the finishing of the stones with a special varnish. As a rule, high-quality acrylic-based varnishes look ideal. In those places where the coating is usually subject to constant contact, three layers of varnish must be applied. Walls that are varnished usually last much longer and look better. To apply varnish, you can take an airbrush or spray gun.
In addition to the traditional steps listed above, you can also finishing the hallway with decorative stone use additional decoration of the masonry. Usually, it is not always possible to match the intended color scheme of different finishing materials used in the same room. To achieve harmony, the stone can be tinted on top, or the texture can be emphasized with gold or silver paint, if this suits the style. With the help of proper use of dyes, it is easy to achieve a very original three-dimensional effect.
The finishing touch is also to process the masonry at an angle using an airbrush. This is done with a mixture of pigment, water and regular acrylic varnish. This way you can not only give the desired color scheme to the masonry, but also repair unsightly seams. For strong spraying, you should prefer a shade darker than the color of the stone.
In order for your masonry to look beautiful and impressive, you need to correctly arrange local lighting sources. As a rule, decorative stone looks good in dim lighting. Several small sconces with yellow light will give the entire room warmth and comfort, cold white light will add fundamentality and rigor - in principle, it all depends on the chosen style.
Decorating the hallway with decorative stone goes well with the most various materials: it can be not only wood, but also glass and even steel. That is why designers are increasingly using this material in high-tech, or in the style of modern minimalism. Please note that if you decide to line the walls with stone dark shades, it is better to make the other finishing lighter, otherwise the corridor will seem gloomy.
Decorative stone finishing- this is perhaps the best, most practical and spectacular option for renovation in any hallway. With the help of decorative stone you can give a certain mood to the room, make the entire interior not just cozy and representative, but also truly luxurious. Decorative stone can be combined with plaster and wallpaper, as well as with simply painted walls. Therefore, when starting work, do not forget the old and tired, but true truth: a house begins with a hallway, like a theater with a coat rack.