A warm and cozy sweater is one of the basic things in a woman’s wardrobe. You can knit a sweater using knitting needles from light and delicate mohair, melange yarn, and from warm wool yarn. Sweater models are very diverse. Women's goes well with skirts, trousers and jeans. Knitted sweaters women's schemes and a description of knitting you will find in our article.
Women's mohair sweater with cowl collar with diagrams and descriptions
This is very beautiful model A women's sweater is suitable for both girls and older women. The color can be chosen to suit your taste. We will now tell you how to knit a sweater for women of this model.
You will need:
- 350 gr. mohair (50g./250m.) - knit in two threads;
- knitting needles No. 3 and No. 5.
Size: 46/48.
Knitting density: 16p. x 19r = 10 x10cm.
Knitting technique: we knit a wave pattern in accordance with the diagram. Inside out yarn overs in purl knitting pattern. Repeat from rows 1 to 36. 
Description
We start knitting sweaters for women from the back. On the sp. No. 3 cast on 83 stitches. We knit the first row like this - 1 krom.p., 3 l.p.*10 i.p.+3 l.p.* 4 times. Then we knit like this - 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* five times, 1 cr.st. There should be six repeats in one row. The armhole is knitted like this - in the 93rd row we close off 5 loops on each side. Then cast off 2 stitches in every second row. 2 times, 1 loop twice. There should be 61 loops left. We continue knitting until row 136. Then we close all the loops.
We knit the front part of the sweater in the same way as the back. Only at 116 rubles. We begin to design the neck. To do this, you need to close the middle 13 loops and close 2 loops on both sides of these 13 4 times in every 2nd row. There should be 16 loops left on each side. In row 136, close all loops.
Let's start knitting the sleeves. Both sleeves are knitted in the same way. We cast on 44 loops. We knit the first row in the following way - 1 edge st., 3 lp*10 i.p+3 lp* 2 times. Then we knit like this - 1 cr.st., 3 sts. purl stitch before rapport, *13 sts + wave pattern* 2 times, 1 cr.st. There should be three repeats in one row. To expand the sleeves in the 10th r. From the beginning of the work, make an increase in the 1st stitch on both sides, and then every 10th row, increase the 1st stitch. 6 times. There should be 58 stitches on the needles. In order to get a sleeve roll, you need 84 r. make decreases - close 4 loops on each side, and then close every second row 1 time for 1 loop, nine times for 1 loop, and four times for 2 loops. There should be 12 loops left. At 114 r. close the loops.
All that remains is to assemble and tie the neck. Sew the sides and shoulders. Then we sew the sleeves and sew the sleeves into the armholes.
We knit a sweater with a collar. To knit it, you need to cast on 84 loops along the neckline and knit sp. No. 3 elastic band 1x1 seven rows. Then you need to change the sp. on No. 5 and continue knitting with an elastic band for another 43 rows. In 51st r. close all loops. A beautiful knitted sweater for women with mohair knitting needles is ready!
Delicate white sweater knitted from mohair with diagram and description
In order to tie White sweater For this model you only need yarn and knitting needles. Read the description about how to connect it.
Pink fashionable mohair sweater with openwork braids for beginners
Sweater knitted from melange yarn with patterns and descriptions for beginners
The front of a melange yarn sweater is knitted similarly to the back, but the neckline is knitted separately. To do this, at a height of 50 (51) 52 from the beginning of knitting, you need to close 8 (9) 8 central loops. Continue knitting each of the parts separately. Then in every second row, decrease 7 times on both sides, one loop at a time. The shoulders are knitted like on the back. At a height of 70 (71) 72 close the loops.
To knit sleeves, you need to cast on 5 needles 34 loops and knit 10 cm with an elastic band. Next we knit with stockinette stitch sp. No. 6. To decorate the bevel of the sleeves, you need to add 1 loop in every 14th row from the elastic 4 times, 5 times in 12 r. on the 1st loop and 6 times on the 1st stitch in every 10th row. After 45 cm from the beginning of knitting, we form the okat. To do this, 13 times in every 2nd row we make decorative stitches, decrease 1 stitch and cast off 2 stitches. 2 times. At a height of 60 cm, bind off 4 (6) 8 loops.
Product assembly. Sew shoulders and sides. Sew in the sleeves. Cast on 84 stitches along the neck line. Knit in the round with an elastic band of 18 cm. In every second r. make 1 yarn over from two knit stitches in the middle of the front neck. Next row knit according to the pattern. Your knitted stylish sweater melange yarn is ready!
Beautiful pink melange sweater
Original white women's knitted sweater with a round yoke with diagrams and descriptions for beginners
Very soft white sweater with round yoke Suitable for most girls and women. Read on to learn how to knit a stylish and youthful sweater. Knitting a round yoke is not special labor, and at the same time looks very feminine.
You will need:
- 750 gr. cotton yarn with viscose (120 m./50 g.);
- straight and circular knitting needles with number 3 and 3.5.
Size: 44-46(48-50).
Description
The main pattern is knitted according to pattern 1. Strap pattern - 1 r. persons.p., 1 rub. purl loop. The yoke is knitted with the following pattern - pattern 2, knit circles, purl circles - we knit the loops in accordance with the pattern, and purl the yarn overs.
We start knitting the back of the sweater with a set of loops 98 (106) per sp. No. 3. Knit the next 7 centimeters with a 2x2 rib. IN last row add elastic bands evenly along the entire length of 35 (37) loops. Next we knit with the main pattern using knitting needles No. 3.5. Having knitted 32.5 centimeters from the beginning of the fabric, bind off 2 loops on both sides and then cast off 1 stitch 8 times. and 2 pets. alternately in each second row. When the length of the fabric reaches 39 cm, you need to put the loops aside.
The front part is knitted similarly to the back.
Knitting sweater sleeves begins with a set of 50 (54) stitches per sp. No. 3. Continue knitting with an elastic band for 6 centimeters. In the last row of elastic, add 29 (25) cm evenly. Using knitting needles No. 3.5, continue knitting with the main pattern, starting from the arrow in pattern No. 1. To create a sleeve bevel, you need to add one stitch 16 times in every sixth row. Having knitted 40.5 cm from the edge of the part, you need to close two loops in each second row, alternately eight times, 1 stitch each. and 2 pet. There should be 83 stitches left on the knitting needles. Place the loops at a height of 47cm. We knit the second sleeve in exactly the same way.
Knitting a yoke begins with collecting all the postponed loops on a circle. No. 3.5. We knit the next row with knit stitches. Then touch the edge loops and knit two loops together 11 (12) times. Result - 361(380) pets. We continue knitting the yoke pattern. Having knitted according to pattern No. 2, we switch to circle knitting needles No. 3 and knit 2.5 centimeters with a strip pattern. In the fifth round, evenly distribute the decreases - six times, 2 stitches each.
Compound finished parts It is advisable to use a knitted seam.
Congratulations! An elegant women's white sweater with a round yoke is ready!
Beautiful red sweater with a round yoke with a collar
This red sweater with a round yoke and wide collar looks very impressive. Red color suits girls and women with a bright appearance, most often brown-haired. But if red doesn’t suit you very well, then you can take threads of any other color. We suggest you link it according to the description.
Original white women's sweater with braids with patterns
Pink openwork original sweater
Pink openwork sweater knitted with needles No. 4.5 and wool yarn. Openwork pattern Knit according to the pattern below.
Openwork sweater knitting video master class for beginners
Women's raglan sweater
To link a very popular one, watch this video.
The diagram below shows how you can knit raglan.
Ways to reduce raglan sleeves.
Reducing the loops using raglan sleeve needles.
Decorative decrease in raglan sleeves.
Beautiful gray raglan sweater with diagrams and descriptions
Green women's sweater with hood
A sweater with a hood of this model is ideal for walks, trips out of town and informal meetings, both for girls and women. So beautiful and original sweater with hood and beautiful pattern will become an indispensable item in your wardrobe.
You will need:
- 600-700 gr. yarn from sheep wool Merino Air (130 m/50 g);
- knitting needles No. 4.5.
Size: 36/38 (40) 42/44.
Knitting an elastic band - 2 edge loops + loops multiples of 4. Knitting rows - 1 stitch + 2 stitches + 1 stitch. Purl knit according to the pattern. The diagram shows only knits.r., and purl.r. knitted according to the pattern. We repeat the rapport between the edge loops. Pattern with braids (A) - loops are multiples of 4 and two edge loops. Knitting is carried out according to pattern No. 1. Repeat rows 1-4, complete rows 5-6. Pattern with braids (B) - loops are multiples of 8 and two edge loops. We knit according to pattern No. 2. We knit once 1-14 r. and repeat 5-14 rubles. Honeycomb (pattern) - loops are multiples of 4 and two edge loops, knit according to pattern No. 3 with 1-4 r.
Pattern A - the sequence is as follows: elastic band - 28 rubles, 34 rubles. pattern A, 74 rub. pattern B, 30(34)38 honeycomb pattern. Total 166(170)174 rows depending on size.
Pattern B - the sequence is as follows: 68 rows knit with an elastic band, 42 r. pattern A, 22 r. honeycomb pattern. Total 132 rows.
To knit the back of a sweater with a hood, we need to cast on 114 (122) 130 stitches. and knit with pattern A. After 40.5 centimeters from the beginning of knitting (this is approximately 110 rubles), we close eight loops on each side for the armholes. After 59 (60.5) 62 centimeters from the edge of knitting for bevels, close in every second row 7 (8) 9 stitches. at both sides. After 61.5 (63) 64.5 cm from the edge of the knitting, close the loops.
We knit the front part of the sweater with a hood like the back, but to knit the neckline we use 55.5 (57) 58.5 centimes. we close the central 12 loops and finish the resulting two sides separately. To get a beautiful round neck, we close off 1 x 4.5 x 2 and 1 x 1 stitches in every second row. Focusing on the back, close the loops.
To knit the sleeves of a sweater with a hood, we need to cast on 58 (62) 66 stitches. and knit with pattern B. In each. in the eighth row we add one loop 13 times and in every sixth row three times one loop, in the subsequent eighth row one loop 1 time and in every sixth row one loop 1 time. After 49 centimes. (32 rows) from the edge of the product, close all loops.
Start knitting the hood from the left half. To do this, cast on 18 stitches. and knit with a braided pattern (A). Additionally, we cast on from the set edge for the side bevel on the right in every second row 4x6 and 4x7 stitches. and include them in the pattern. After 21.5 centimes. from the edge we close 1 st to round it inward on the right. and every 2nd row 4x1.4x2.1x3.1x4 stitches. After 29.5 centimes. put all the loops aside. Symmetrically knit the right side and connect the set-on loops with a knitted seam and connect the back seam.
We assemble the product. To do this, we sew the shoulders and sew the hood to the neck of the sweater. We sew in the sleeves, sew the sides and sleeves at the seams. Congratulations - beautiful sweater ready with the hood!
Blue sweater with aran with description
A sweater with beautiful arans looks very impressive. We invite you to connect this simple model with arans. She suitable for girls and women of all ages.
To knit a sweater with arans, you need to learn how to knit them. From this video master class you will learn how to do this.
Pattern for a sweater or jacket - 1
Pattern for a sweater or jacket - 2
Pattern for a sweater or jacket - 3
Pattern for a sweater or jacket - 4
Knitting for beginners must be mastered from the simplest models. On the site Knitting for women.ru presents knitting lessons for beginners, new techniques and ways to make loops and patterns.
After completing the knitting course for beginners, you will be able to knit simple models for women.
Knitting a simple pullover for beginners
This simple jumper is knitted in garter stitch. An experienced craftswoman will knit such a pullover in two to three days. If you do not have sufficient experience, this description of knitting for beginners will help you get the job done. It is advisable to buy the appropriate yarn, and then you will not have any special difficulties. Knit the sweater exactly as described.
Step by step instructions and the description is for sizes 44/46/48/50/52
For knitting a jumper you will need: 400/450/500/550/600 g of yarn (50% cotton, 50% acrylic, 140 m/50 g); knitting needles No. 5.5. The sweater must be knitted with double thread.
Knitting patterns for beginners
Sweater knitting density. Garter stitch, knitting needles No. 5.5: 15.5 sts and 28 r. = 10 x 10 cm.
The pullover must be knitted in one piece, starting from the front.
How to Knit Front Sweaters for Beginners
Using a double thread, cast on 70/77/83/91/98 sts. Knit the jumper using garter stitch.
After 33/34/34/35/36 cm (= 92/96/96/98/100 r.) from the cast-on edge for the beginning of the sleeves, add 11 sts on both sides = 92/99/105/113/120 sts.
After 52/54/56/58/60 cm (= 145/151/157/161/167 r.) from the cast-on edge of the sweater with wrong side for the 1st shoulder bevel, knit 26/29/31/34/37.
To cut out the neckline of the jumper, bind off the next 40/41/43/45/46 stitches, knitting them, for the 2nd shoulder bevel, knit the remaining stitches. The front of the pullover is finished.
How to knit the back of a sweater
In the next row, knit all the loops, casting on 40/41/43/45/46 new stitches instead of closed stitches = 92/99/105/113/120 stitches. Continue with garter stitch.
After 19/20/22/23/24 cm (= 54/56/62/64/68 p.) from the beginning of the back of the sweater to end the sleeves, close 11 p. on both sides = 70/77/83/91/98 p. .
After 52/54/56/58/60 cm (= 147/153/159/163/169 r.) from the beginning of the back, close all the loops with knit stitches on the wrong side.
Assembling and finishing knitting a sweater for beginners
Pattern knitted sweater enlarges on mouse click.
Knitting a short sleeve jumper for beginners
Sizes: 44/46/48/50/52
For knitting sweaters you will need: 350/400/450/500/500 g of yarn (50% cotton, 50% acrylic, 140 m/50 g); knitting needles No. 5 and No. 5.5. Knit with double thread.
Easy Knitting Patterns for Beginners
Garter stitch: facial and purl rows knit facial loops.
Facial surface : knit front rows with front loops, knit purl rows with purl loops.
Sweater knitting density. Stockinette stitch, knitting needles No. 5.5: 17 sts and 20 r. = 10 x 10 cm.
Knit the jumper with knitting needles in one piece, starting from the front.
How to knit a front pullover for beginners
On needles No. 5, cast on 76/82/90/98/106 sts with double thread. Knit 8 p. garter stitch.
Switch to knitting needles No. 5.5 and continue knitting the sweater in stockinette stitch.
After 33/34/34/35/36 cm (= 68/70/70/72/74 r.) from the cast-on edge for the beginning of the sleeves, add 13 sts on both sides = 102/108/116/124/132 sts. Next, knit 5 sts in garter stitch, 92/98/106/114/122 sts. satin stitch, 5 p. garter stitch.
After 49/51/53/55/57 cm (= 100/104/108/112/116 r.) from the cast-on edge, knit in garter stitch on all stitches.
After 52/54/56/58/60 cm (= 107/111/115/119/123 r.) from the set-on edge from the wrong side. sides for the 1st shoulder bevel, knit 29/31/34/37/40, for the neckline 44/46/48/50/52 stitches, close as knit, for the 2nd shoulder bevel, knit the remaining knit stitches.
Before finished.
Knitting a sweater back for beginners
In the next row, knit all the loops, casting 44/46/48/50/52 new stitches instead of closed ones = 102/108/116/124/132 stitches. Knit 7 r. garter stitch, then knit 5 sts in garter stitch, 92/98/106/114/122 sts. satin stitch, 5 p. garter stitch.
After 19/20/22/23/24 cm (= 40/42/46/48/50 r.) from the beginning of the back to end the sleeves, close 13 sts on both sides and knit. satin stitch = 76/82/90/98/106 p.
After 49/51/53/55/57 cm (= 100/104/108/112/116 r.) from the beginning of the back, switch to knitting needles No. 5, knit 9 r. garter stitch and bind off the stitches. from inside sides.
Assembling and finishing a sweater with knitting needles for beginners
Sew sleeve seams and side seams.
Pattern simple sweater for beginners increases by mouse click.
It would seem that in modern fashion stores you can find any clothes, and yet, every year, things self made are becoming more and more relevant. One of latest trends steel knitted sweaters - a huge variety of patterns, styles and design options allows you to create unique models. Do you want to stand out from the crowd or please your loved ones? stylish clothes? Then with my own hand knitted sweater will be a great solution. Thanks to our recommendations, you will see how easy it is to cope with this task.
Handmade sweater - the perfect gift
Sweaters did not immediately become part of everyday wardrobe. They were previously used as weight loss clothing. European doctors believed that playing sports in a sweater increases sweating and thus helps burn excess fat. Subsequently, such clothes were appreciated by sailors and athletes involved in winter sports.
Knitted sweaters became popular in the 1930s thanks to Coco Chanel, who introduced elegant clothes for women. Now they are extremely popular among both women and men.
Knitted sweaters are not only fashionable and comfortable, they are also great gift for loved ones. His giving reflects yours warm attitude and feelings for a person. And if you were able to knit a sweater with your own hands, then the value of the gift increases many times over. This item is doubly pleasant to wear; it will always remind the gift recipient of you. The main thing is to make sure that you have chosen before starting work. correct style- for this, it is still better to carefully clarify what exactly the person likes, because your tastes may differ significantly. This universal gift, which will appeal to anyone. You can safely knit for any family member or friends. This gift will especially appeal to practical people who are not too fond of trinkets.
A DIY knitted sweater is a unique thing, there is no second one. You can be sure of its excellent quality, since you can personally choose the most suitable yarn. In addition, by creating a product with your own hands, you can get rid of the problem of choice. After all, often, when we go shopping, we already mentally imagine what kind of thing we need to purchase. But finding clothes that match our fantasies is not easy. Handmade allows you to create your own masterpiece.
What threads to knit with
The choice must be approached with special attention, because its quality directly depends appearance finished product and its service life. When buying knitting threads, pay attention to the label; it shows the most important characteristics:
- compound;
- thickness (length);
- spoke number;
- color;
- batch data.
Please note that threads produced in different batches may differ in tone. Therefore, in order to avoid not very pleasant surprises, it is better to choose yarn from one batch. Also important indicator is the thickness of the thread. Choose yarn of the same thickness as indicated in the pattern you like, this will help avoid problems in the future.
You can knit a sweater using knitting needles using either thick or thin threads; the choice depends on your personal wishes. The main thing is to choose a suitable pattern, since some patterns can only be knitted with yarn of a certain thickness, otherwise ready product It won't look as stylish.
But the most important point, of course, is the composition of the yarn. Wool threads are used for knitting, but you can also use cashmere, angora, mohair or merino. If you are creating knitted product for the warm season, pay attention to cotton, linen or silk yarn.
Description of the process for beginners
Knitting is very exciting and interesting activity, which can easily become your main hobby. Learning to knit is not difficult, and today there are many magazines for needlewomen, with the help of which you can easily master this skill. In addition, a suitable scheme can be easily found on thematic resources on the Internet.
It is important to correctly calculate the number of loops - if a mistake is made at this stage, the item will not correspond to the pattern at all, and in the end it will already be partially finished work will have to disband and start all over again. The descriptions of the models always indicate the required number of loops, but you should not completely trust this data. You can choose a different yarn and knitting needles; as a result, the knitting density may differ significantly. Therefore, in order to knit a really good sweater on knitting needles, you need to calculate the loops yourself. To do this you need:
- take measurements of yourself or the person you are knitting for;
- calculate the length and width of the product;
- knit a sample measuring 10x10 cm;
- measure the number of loops per 1 cm.
All data must be recorded. These simple calculations save time that would otherwise have to be spent on corrections in the event of an error. This moment is especially important for beginning needlewomen who have decided to knit a sweater on knitting needles for the first time.
After training with the sample, you can begin working directly on the product. The back or sleeves are knitted first - this is what they do experienced craftswomen who know very well that during the knitting process there may not be enough threads, and it is not always possible to purchase additional ones of the same tone. In this case, you can make a pattern on the front part with yarn of a different color, so the model will look even more original. The front part is knitted last, as well as small parts: collar, pockets and so on. This order is due to the fact that during work you may have a desire to slightly change the style, or add some decorative elements.
You should be especially careful when working with shoulder sections and necklines. No less care should be taken subsequently when connecting parts of the product, because the slightest mistake can ruin the thing. Before connecting the parts knitted sweaters, iron them through a damp cloth.
In the process of knitting, you will certainly encounter the need to add and decrease stitches. You can do this different ways, based on what part of the product you are currently working on. If you have never done this before, you should first practice on a sample.
It is very important to choose a good, clear scheme, because it is the main key to success. It is especially important to take this into account for beginning needlewomen who are not yet very well versed in the features of knitting and will not be able to independently make changes to the existing instructions. In addition, you should not throw away the yarn label until you finish knitting. This will be useful if there is not enough material - using the label on which the yarn and batch numbers are indicated, it will be easier to find additional threads.
When the product is ready, it must be ironed. Be careful and never press the iron against relief ornament, this may ruin the pattern. To avoid unpleasant consequences, carefully iron things with patterns at a low temperature.
Instructions
Choose your favorite pattern in a knitting magazine. Study and select threads and. In the description you will find exactly what tools you will need. But it happens that the necessary threads not in the store. In this case, in the description, find an indication of what yardage the yarn should be and what its composition is. Select the appropriate yarn based on these data.
Before you begin, knit a sample. Cast on the knitting needles with which you will knit 12 stitches and knit 12 rows. Measure the resulting sample. The point is that even if you find the yarn indicated in the description, you need to knit the sample. Each knitter has her own hand and her own knitting density. Some knit tightly, some loosely. This determines what size the item will be at the end. Based on the sample, calculate how many loops you need to cast on to get the final result suitable size.
Dial required amount loops on the knitting needles. Bottom sweater and is usually knitted with 1x1, 2x2 or 3x3 rib. If you need to knit with a 1x1 rib, remove the edge, knit the next stitch, then purl, and so on. In the next rows, repeat the pattern of the previous row, that is, knit knit stitches over the knit stitches, and purl stitches over the purl stitches. If you need a 2x2 elastic band, then after the edge you need to knit 2 knits, then 2 purls, and alternate them, if 3x3, respectively, you need to alternate 3 knits and 3 purls.
Usually sweater It is knitted from the bottom up, but there are also patterns that need to be worked from top to bottom or from right to left, or even from the center. Carefully read the instructions for the model before you start knitting. In case if sweater It is not knitted from the bottom up, there can be many starting options - it is not necessarily an elastic band. This happens rarely, but it’s still better to be more careful so that you don’t have to disband your work.
Please your beloved man with a new fashionable sports jumper with short sleeves made with your own hands. Knitting this model is quite easy, you just need a little time and patience.
You will need
- For size 48 model (knitting density -31 loops per 10cm):
- - 250g red wool yarn in 3 plies and some black and white for finishing;
- - knitting needles No. 2.
Instructions
Start knitting the jumper from the back. To do this, cast on 160 stitches on needles No. 2 and knit 2 cm with 1*1 elastic band and 40 cm (to the chest line) with stocking stitch, adding 6 times one loop every 6.5 cm. Next, at the end of each row along the raglan line, knit 2 loops together. And when you have 48 stitches left on your needles, cast them off in one row.
When the back of the jumper is ready, start knitting the front. Cast on 160 stitches and knit 2cm with 1*1 rib and 4cm with stocking stitch. Next, knit from three balls, making stripes and knitting a diamond, with black threads, starting with two loops.
Be careful, when 40 loops are knitted across the width of the diamond, attach white threads and start knitting from five balls. Continue this way until 20 loops are knitted with white threads on both sides of the black diamond. After this do top part white diamond while finishing the top of the black diamond. Make the increases on the sides exactly as on the back.
As soon as you reach the neck line, divide the loops into two parts and start knitting the right side first, closing from the neck side: 8.4 times 3 and 4 times 2 loops. And at the end of the row, from the side of the raglan line, knit two loops together. Tie the left side in the same way.
Today the market is flooded with Chinese sweaters made from cheap synthetic yarn. Such knitwear is inexpensive, but does not last very long - after all, any wash can deform poor quality knitted item, making it unsuitable for further use. Even high-quality mass-produced sweaters have a serious drawback - there are too many of them. Therefore, when wearing such a product, you can forget about creating your own unique image.
Original sweater
In the cold season, a warm one helps knitted clothing, and connected with my own hands a sweater or pullover will look original, even if it is made according to a pattern published on a popular website for needlewomen.
The variety of yarn provides unlimited scope for creativity. Can choose:
- its composition;
- texture;
- thickness;
- color.
Any pattern looks new if you use threads or knitting needles of a different thickness than those recommended by the author in the magazine.
When choosing how to knit a sweater (for beginners, diagrams with descriptions are supplemented step by step photos), you need to determine your own size, then compare it with the one for which the pattern and diagram were developed in the magazine (on the website). Before you start making an original item, you need to correctly calculate the number of loops, for which you need to knit a square sample. It is advisable to spend time knitting a square with a 20-centimeter side, since the 10-centimeter one, often recommended by magazines, can cause errors when calculating loops for a large product.
A sweater can be knitted:
- starting from the neck;
- from the bottom edge of each pattern piece.
The second option is clearer to beginners, and if errors occur (at first), it is easier to correct them, since you have to unravel less, and an excellent warm sweater it will be easy enough.
Men's sweater
On male model choose more laconic patterns - geometry reigns here: rhombuses, squares, rectangles, created using loops knitted in different ways or threads various colors(invoices). However, for now great experience In knitting, no, you can choose a jumper or sweater with a simple pattern.
It is necessary to take into account the peculiarity of the male physique: the shoulders are wider than the hips. Starting to knit from the bottom edge, you should remember the need to increase the number of loops so that the product expands at the top.
It is somewhat more difficult to knit patterns with jutes. But they look impressive, and rearranging the loops creates a multi-layer structure that retains body heat, which is especially valuable in the cold season.
A sweater is a must-have wardrobe item strong man who loves outdoor recreation and prefers an active lifestyle with fishing trips, and a gentle young lady who appreciates warm and comfortable clothes. In addition, knitting allows you to independently make an original item that does not even remotely resemble Chinese consumer goods.