Instructions
Using a fine file, push back the cuticle.
Now you need to degrease the nail. To do this, take special remedy(primer) and apply it to the entire surface of the nail, avoiding contact with the cuticle and skin.
Take a special form and place it under the tip of your natural nail. Pressing the mold well, secure it to. Molds are reusable (iron forms) and disposable (paper forms, which are attached using).
Apply primer again and you can begin applying acrylic.
Soak the brush in liquid (this is a special product so that acrylic powder can be used to create nails of the desired shape) and take small ball acrylic white. Place the ball where the natural nail meets the nail shape and form a smile line.
Now take an acrylic ball and apply it to the cuticle area and stretch it all over the nail so that it is white and pink colors slightly touched. Try to lay the acrylic as evenly as possible to make filing it easier.
After you have formed the desired length and shape of the nail, start filing it using a coarse file (never use an iron file - the acrylic nail may crack). First, process the sides, then take a fine-grain file and carefully process it so that the surface is even and smooth.
In this way you have increased the classic one. You can combine if you wish different colors acrylic or use only clear acrylic and cover your nails with colored varnish.
note
In order to grow your nails at home, you should purchase a set that cosmetologists use. Standardly it includes an ultraviolet lamp, tips, degreaser, liquid for removing the sticky layer, files, gels, adhesive coating, disposable forms
Doing your nails at home for the first time can be a bit challenging. For example, you may experience gel peeling from nail plate. This phenomenon may occur due to insufficient treatment of the nail before extensions. It is best not to use hand cream for at least one day before you do your own nail extensions at home. Nails should be prepared by first removing cuticles and hangnails.
Sources:
- acrylic nail extensions at home in 2019
There are no boundaries in the modern art of manicure; there are a huge number of methods and techniques for extensions. nails. The artificial material allows you to visually correct the fracture and structure of the nail plate, and it does not matter what condition your nails were in. natural nails. Acrylic is one of the most popular materials used to build strong and elastic nails.
You will need
- - glass container;
- - pink acrylic;
- - white acrylic;
- - primer;
- - coarse file;
- - a file with fine grain;
- - orange stick;
- - brush;
- - forms;
- - liquidity;
- - brush.
Instructions
Before you start acrylic extensions nails, prepare them: wash your hands thoroughly with soap and disinfect each nail plate with a special spray (or antiseptic gel). If necessary, perform a dry manicure. Apply a softening compound (based on fruit acids) onto the cuticle and after some time push it back using an orange stick.
File your nails, working in one direction with the file. Using a coarse file, remove top coating nails Using gentle and light movements, try not to damage the cuticle. Remove any dust formed after treatment with a special brush.
Apply a thin layer of primer to the nail plates, being careful not to get it on the skin. After the liquid has dried, coat all nails with primer again. Take the form and place it on the phalanx of the finger so that it is located under the corners of the nail, leaving no gaps. Carefully connect the ends of the form, it should take a natural and correct bend.
Wet the brush again in the liquid and apply a third ball of powder to the stressed area of the nail (the junction of the white and pink layers) for strength, the surface should remain slightly damp. Wait until the acrylic is completely dry and remove the molds. Use a coarse file to straighten the nail, tilt the file at an angle, try not to touch the skin. Sand the surface of the acrylic nail with a fine-grit file.
All that remains is to apply the finishing coat to the nails clear varnish, dry, lubricate the cuticle area with special oil and distribute along the length of the nail.
A beautiful manicure is an indispensable attribute of every girl. However, such luxury is not available to everyone. After all, natural nails often peel and break at the most inopportune moment. In addition, the varnish does not adhere to them so firmly.
Therefore, more and more representatives of the fair sex are choosing a simpler method of achieving the perfect manicure - nail extensions with acrylic or gel. However, the first substance is used more often, since it is more plastic, durable and translucent. In addition, you can create from it volumetric manicure using figured modeling.
This material is a polymer characterized by thermoplasticity. It is usually produced on the basis of acrylic, methacrylic acids and their derivatives. By replacing a number of components, we get Various types of this substance. Main components of this material are polymer and monomer.
Today you can buy everything you need for acrylic nail extensions in many stores, so this method of creating a manicure is very popular.
Typically, the extension kit also includes bases for nails. These can be special forms or tips. The latter are more popular because they are more accessible and easy to use.
Among the advantages of acrylic nail extensions, it is worth highlighting the following factors:
However, despite such compelling advantages, many people prefer gel extensions. After all, this composition has less impact on the structure natural nails. However, the technique of gel extensions is very complex, and the coating is quite thick and very different from natural nails.
In addition, it has been proven that acrylic has the following range of disadvantages:
- short-term presence of a pungent odor;
- when extensions are made with gel, the nails breathe, but when using acrylic, they do not;
- short-term loss of shine of the nail plate;
- the presence of methyl methacrylate in acrylic, which is a toxic poison, which cannot be said about gel nail extensions;
- there is a taboo on the use of liquids containing acetone - they remove shine from acrylic.
If you want to get a beautiful manicure in which the structure of the nail plate will be similar to natural, then you should choose acrylic. If the main goal is aesthetic beauty and safety, then it is better to give preference to gel extensions. However last method It will be difficult to implement at home.
What is needed for acrylic nail extensions?
Before starting this process, it is important to make sure that your extension kit is complete. After all, just one missing element can ruin your manicure.
Therefore, be sure to include the following components in your kit:
- polymer powder and monomer for acrylic extensions;
- the presence of a primer to improve adhesion or primer is also important;
- the presence of a bond is important - a liquid for cleaning and drying the native nail before applying acrylic;
- the presence of a solvent for acrylic is important;
- specific brushes;
- a set of files, polishers and grinders;
- availability of tips or forms (depending on the chosen method);
- Rev;
- fixing adhesive for tips or forms;
- special pliers designed to give tips the required length and shape;
- a set of varnishes at your discretion.
However, the availability of all ingredients is not a guarantee. successful build-up. Experienced manicurists recommend watching a lesson online and strictly following the master’s recommendations step by step.
Correct acrylic nail extensions at home include the following steps:
This is a standard acrylic nail extension technique. However, there are two branches in it that require increased attention. After all, the wrong selection of a method is fraught with the appearance of annoying errors and the need to completely redo the manicure.
Acrylic extensions on tips and forms
As practice shows, regardless of the chosen method, the result will be of high quality and aesthetically pleasing. But the process of working with tips is simpler.
It consists of the following stages:
- selection and preparation (filing with a buff of the top layer and the place of future fastening in the nail) tips;
- hand cleaning;
- cuticle treatment (useful for this) manicure set);
- disinfection of nail plates, application of prep to their tips and fixation of tips using a special adhesive;
- trimming and giving the required shape;
- processing the connection between the tips and the nail plate;
- acrylic application;
- sanding, care and decoration.
If the extension is carried out on a form, then the technique will be similar to the use of tips. But after applying acrylic, the form is carefully removed from the nail. This process clearly demonstrates a lesson on acrylic nail extensions from the Internet.
The extension procedure requires certain skills and knowledge, and the use of high-quality materials. This is not so easy to do at home; you should take into account the rules for preparing the plate, the nuances of the technology and possible contraindications.
1. You need to purchase tools. The first is an ultraviolet lamp; for home manipulations it will be enough to buy a device with one 9 W diode.
2. In the process of work, you will need files with a grain size of 80 and 100 grit. Brushes are taken in a drop-shaped form from natural materials, when using the gel, you will need tools with artificial, flat bristles.
3. To push back the cuticle, use a double-sided pusher or an orange stick. Depending on the manicure technology, you should purchase forms, tips with glue or fabric covering, and tweezers.
4. must be disinfectant for treating hands and instruments (Batsilol, Cutasep, Chlorhexidine). A dehydrator is used for drying, a primer and a bonder are necessary for reliable fixation of your own nail with the artificial one.
5. Directly for extensions and design at home you will need acrylic powder or gel, monomer (hardener), finishing top and degreaser. Gel systems are single- and three-phase.
You can buy all of the listed devices in a specialized store or order them online. Manufacturing companies offer starter kits for beginners, which contain everything necessary materials. Preference should be given to products of the Kodi, CNI, Nubar, Lina brands.
How to properly extend nails using tips?
There are several types of technology - manicure based on acrylic and gel, on tips or forms. Acrylic hardens quickly, and the gel mass can only harden when exposed to ultraviolet rays.
The fastest and budget option is modeling using ready-made plastic templates. To extend your nails yourself at home, you need to choose a tip for each finger so that its base matches midline plates.
They trim their nails and remove the shine with a file, degrease them, and push back the cuticles with a pusher. A drop of special glue is applied to the inner recess and the tips are fixed to the plate at an angle of 45°. Then press firmly and hold for 10 seconds.
After this, the transition line from the plastic to the nail is cut down so that the surface is smooth. Apply a primer and a thin layer of base gel on top and dry in a lamp for 2 minutes. The apex is lined with modeling gel and sent to polymerize for another 2 minutes. The tips are filed down and contoured. The final stage is the application of the finishing top and design.
Step-by-step instructions for nail extensions using forms
For gel technology You will need special forms, they can be single or reusable. The advantages of this method include the ability to simulate any design, strengthen and grow your own plates. The downside is the duration of the procedure; you will have to spend about 3 hours.
Instructions:
1. Treat your hands with an antiseptic.
2. Use a pusher to push back the cuticle.
3. Use a file (180 grit) to file the surface of the plate to remove shine, thoroughly cleaning the area near the roller.
4. File the free edge of the nail, not too short, so that it becomes a shape.
5. Remove dust with a brush and degrease.
6. Treat with primer and dry for 2 minutes in a lamp. For hyperhidrosis, an acidic type of drug is used during extensions; in other cases, an acid-free type is used.
7. Squeeze out the tongue of the form and fix it with reverse side, break the joint along the perforation line. Bend the template a little and place it under the nail, make sure that you get a flat surface without gaps, glue the ears to the finger.
8. Use base gel to extend the free edge of the plate, giving the desired length and contour.
9. Dry in a UV lamp for 2 minutes.
10. After polymerization, carefully remove the template.
11. Apply a thick layer of modeling gel, grow the apex and dry for 3 minutes.
12. Remove the sticky layer with a lint-free cloth.
13. Use a 100 grit file to file the artificial nail and buff it with a buff.
14. Use a brush to brush off dust and degrease.
15. Apply thin layer finishing gel and dry in a lamp.
16. Remove the sticky layer and begin designing.
You can also grow your nails using top forms. The procedure also begins with antiseptic treatment and preparation of the plate. Then a special one is selected for each finger plastic template. on his inner surface in area free edge post modeling gel and dry in a lamp for 20 seconds.
Next, on the upper form in the cuticle area, extensions are carried out with a construction gel, the template is tightly applied at an angle of 45°. Holding the structure, the finger is placed in the lamp for 3 minutes. The pusher carefully removes excess from inside. The plastic is removable and can be used up to 50 times. After this, degreasing and design are carried out.
This method is used good reviews due to the speed and ease of the procedure. Any girl can get the perfect manicure on her own without visiting a beauty salon.
Step by step acrylic extension
The technology has become widespread due to the strength and durability of the material. Acrylic has a sharp, bad smell. Therefore, you need to provide ventilation at home and use medical mask for face. If coated with varnish, the shine and transparency of the artificial plates is lost.
Extensions in the salon or at home are carried out using acrylic powder and a special monomer. When these components are mixed, a viscous mass is formed, rapid hardening occurs, so all manipulations are performed quickly. Brushes should be made from natural materials, oval shape with a pointed tip. After work, they are thoroughly cleaned with special solvents.
How to grow your nails at home step by step:
- The initial stage is disinfection, removal of the cuticle and preparation of the base.
- Bond is applied, then the forms are fixed on each finger.
- The brush is moistened in the monomer and dipped into the powder, creating a ball of polymer that must be quickly applied to the nail.
- First, build up the free edge, after which the entire surface is laid out.
- The center is modeled, forming the apex.
- To create an arch, clamp the plate in the stress zone with tweezers for 20 seconds.
- After hardening, the mold is removed and filed to give the desired contour.
- After extensions, polish with a buff.
- To add shine, apply a finishing gel, pattern or varnish.
- Finally, the cuticle is treated with nourishing oil.
It is best to use an acidic primer, this will help increase wearability. To correctly lay out the length, the molds must be at an angle of 45° to the table surface, so the material will drain and distribute evenly.
Silk extension technology at home
Not only acrylic and gel allow you to grow your nails, alternative option is the use of silk. This method is suitable for women with thin and brittle plates. The main disadvantage is the fragility of the structure. The procedure will require special material, tips, nail scissors, glue, spray activator.
Instructions for extensions at home:
- Disinfection and standard preparation method.
- We select and stick tips on each finger. You need to make sure that there are no air bubbles left under the template.
- Wipe off cotton swab excess glue.
- Use a tip cutter to remove excess length.
- We file down the transition line from healthy nail to the tips.
- Apply fabric covering glue over the entire surface of the plate.
- Spray the top with an activator spray and let it harden.
- Cut a piece of silk for extension to the shape of the nail.
- Apply the fabric (distance from the cuticle – 0.5 mm).
- We correct the shape of the silk with rounded scissors.
- We apply glue for the fabric covering again, but the layer needs to be doubled. The material should become transparent.
- Spray activator spray on top.
- After hardening, we gradually file and give the desired shape.
- We sand the surface with a buff.
- Use a polishing file to add shine.
Silk technology allows you to do without gel and acrylic, increase length, prevent fragility, grow and strengthen weak plates. Fabric covering can also be used for gel extensions, the material is placed between the nail and the biogel. This gives maximum strength and is suitable for those who like very long manicures.
Silk extensions are much cheaper than other methods and take less time. But the design is fragile and requires careful handling, for this reason this technology is rarely used.
Many women, due to lack of vitamins and daily homework nails break. Therefore, to save time and keep your hands in order, it is customary to build them up. Due to the high cost of the procedure, some girls are thinking about doing their own extensions.
Types of nail extensions
Now you can extend your nails using gel or acrylic. Gel is considered a safer material; in addition, there is no unpleasant odor during the modeling procedure. Regardless of the material, it can be extended onto tips or forms. When using a tip, an artificial free edge is glued to the tip of the nail, and the nail bed is covered with acrylic or gel. This method of modeling reduces time, but, unfortunately, you won’t wear these nails for very long. Therefore, if you are going to show off your perfect manicure, select extensions to forms.
Acrylic nail extensions
When building up, a substance is used that consists of powder and monomer (liquid). When liquid is added to the powder, it acquires a mushy consistency. Thus, the resulting mixture can be applied to the nails with a brush. After 30-90 seconds the mixture hardens.
Advantages of acrylic extensions
This extension method is suitable for beginners, as it is easier to work with acrylic than with gel. But first you will have to spend a decent amount of money on purchasing materials and tools. Acrylic is used to decorate nails using sculpting. Thanks to the plasticity of some substances, it is possible to create relief figures and beautiful designs.
What you need for acrylic nail extensions
You will need the following materials:
- primer;
- subprimer (degreaser);
- brushliner (brush cleaner);
- acrylic Powder;
- monomer (liquid);
- paper forms;
- brushes;
- sanding files (180 grit);
- buffs (soft polishing);
- decor.
Acrylic nail extensions at home
If you carefully follow all the instructions, you will be able to grow your nails yourself. Of course, it is inconvenient to work with your left hand, but over time you will get used to it. The main thing is patience and accuracy. The easiest way to add extensions is under varnish. For this, transparent or camouflage acrylic is used.
How to do acrylic nails: step by step instructions
Let's take a closer look at the step-by-step instructions for acrylic nail extensions at home:
- Before the procedure, it is advisable to do a trim manicure 2-3 days before. This prevents the acrylic from peeling off the nails. It is necessary to carefully remove the cuticle and pterygium, since as the nail gradually grows, the acrylic will peel off precisely at the points of contact with the cuticle and thin film (pterygium). It is not advisable to take a bath or do a manicure immediately before the extension procedure. The nail plate will become very wet, making it difficult to remove water with a primer.
- Next you need to remove the glitter from the nail. This is done using a 180 grit file. There is no need to “scrape” the surface. You should remove the shine and roughen the plate. Be sure to thoroughly treat the cuticle areas. After this, secure the paper form. Apply a layer of degreaser (subprimer) to each nail. Next, treat your nails with primer. You can take an acidic one, but it can burn because it contains acid. This product prevents the growth of bacteria under acrylic. When the primer is completely dry, you can begin extensions. If this is your first time doing nail extensions, pour a little liquid into a glass and pour a teaspoon of powder into a glass container. Soak the brush in monomer and remove excess. Circular movements swirl the brush in the powder. This way you will get a ball of the required size. A thick blob will appear on your cyst. Rather, transfer it to your nail. Using patting movements, press the plastic mixture into the mold.
- You need to start working from the free edge. There are corresponding marks on the forms. Select the required length and from this mark apply acrylic from top to bottom all the way to the nail. Do not apply too much acrylic, carefully level the plastic balls. After each drop, wipe the brush on paper napkin. After forming the free edge, proceed to laying out nail bed. At the very end, treat the cuticle areas. Do not allow acrylic to flow into the cuticle and side ridge areas. There should be a small distance (0.3-05 mm) between artificial material and side bolsters.
- The more carefully you apply the acrylic, the less time you will spend filing. Before it completely hardens, you need to give the nail a natural curve. This is done using tweezers. You can use tubes when installing forms. After the acrylic has completely hardened, remove the molds and start filing. This can be done using a router or manually. Typically, a file with a large grain size is used first. At the final stage, a buff is used. Oil the cuticles and apply the coating. For decoration you can use glitter, foil or acrylic paints.
Gel nail extensions
Gel is a ready-made substance for extensions. It comes in jars and resembles jelly. Once applied to the nail, the gel does not harden on its own. To polymerize it you need to use UV rays.
Using nail gel at home
For extensions you need the following materials:
- primer;
- subprimer (degreaser);
- gel;
- base;
- finish;
- paper forms;
- alcohol;
- brushes;
- sanding files (180 grit);
- buffs (soft polishing);
- decor.
The procedure for shaping a nail with gel differs from acrylic:
- On initial stage you need to do everything as in the first case - prepare the nail and treat it with a primer.
- Next you must apply the base. It is laid out in a thin layer and provides excellent adhesion of the natural nail and the subsequent layer of gel.
- After applying the base, dry it in a lamp and remove the sticky layer with alcohol.
- Set the shapes and sculpt the nail using gel.
- It is applied in two stages. At first the substrate is the base, and after drying it is the final layer.
- After this, remove the molds and remove any irregularities using a sanding file.
- Apply finish and cure in a lamp.
The best gel for nail extensions
At home, it is easier to use a single-phase rather than a three-phase system. This universal gel, which does not require the use of base and top coats. It already contains everything necessary substances, giving artificial nail strength and hardness. The use of a single-phase gel reduces the extension time.
Among the most popular manufacturers single-phase gels the following can be distinguished:
- KODI. The price of a small jar of 15 ml is 800 rubles;
- Global. Cost for 15 ml - 400 rubles;
- NFU. Price for 14 g - 500 rubles;
- YRE. Price per jar - 400 rubles;
- Salon. Price for 15 ml - 600 rubles;
- Lina. The cost of the jar is 200 rubles.
Below is a video about extensions gel nails at home:
Don't think that building up is salon procedure. A similar manipulation can be done at home, all you need is to purchase the necessary materials and have a little patience.
Popular way to create beautiful manicure — acrylic extensions. To do high-quality acrylic nail extensions, step-by-step instructions for beginners will help you.
There are three ways to do an acrylic manicure:
- on the nail plate;
- on forms;
- for tips.
For suitable for beginners any of these methods.
To build up an artificial acrylic manicure, you can’t do without special tools and materials. You can purchase them in specialized stores. You must have:
- acrylic powder for nail modeling;
- liquid (monomer) - a special solution for mixing with acrylic powder;
- set of grinding and polishing files;
- a set of manicure brushes for applying modeling composition and designs;
- acrylic remover, also used for cleaning brushes;
- dehydrate used to degrease the surface of the nail plate;
- primer used to ensure strong adhesion of acrylic to the surface of the nail plate;
- oil for softening and removing cuticles;
- paper forms for modeling marigolds;
- When modeling nails using artificial plates fixed with glue and secured with acrylic, you will need tips, glue, scissors and forceps.
The step-by-step process includes preparation, application of modeling composition and decoration of the finished manicure.
Acrylic nail extensions: step-by-step preparation instructions
Preparation includes:
- Disinfection of hands using any disinfectant and antibacterial agent to prevent infection and development fungal disease on the skin.
- Preparing the base for extensions or the so-called “dry manicure”. For this, files of medium hardness (150-180 grit) are used for grinding and polishing natural nails. Buffs are suitable for polishing them, which not only remove the natural shine from the treated nail surface, but also part of its top layer, which has absorbed substances that are constantly in contact with the hands.
- Cleaning nail plates from dust with an antistatic brush made of natural bristles.
- Degreasing the surface of the nail plate with a dehydrator. Thanks to special properties of this substance, its surface is cleaned of natural fats and dried. This is necessary to ensure high-quality adhesion of acrylic nails to the surface of natural nails.
At the end of work, all tools must be disinfected.
There are also disposable nail files on sale, and some craftsmen prefer to work with them.
Return to contents
Read also: How to remove acrylic nails at home
Extended manicure: application of modeling compound
Extensions are carried out using dry acrylic powder, which, when mixed with a special solution, liquid, forms a viscous mass, which allows modeling of nails. The liquid modeling mixture hardens very quickly, within a few minutes.
For acrylic nail extensions, step-by-step instructions, regardless of which extension method you choose, are as follows:
- Wet the brush in liquid and touch it with the tip of acrylic powder. After a plastic, viscous droplet forms at the tip of the brush, quickly apply it to the nail plate. If you are extending your nails using tips, then first you need to apply acrylic to the base of the nail, 2 mm away from the cuticle. If you use a form, then first you need to form the tip of the nail, and only then its main part.
- The mixture must be applied so that the central part of the nail plate is thicker than its side parts. The surface of the nail plate is smoothed with a brush.
- After the acrylic mass has completely hardened, you can process the nails.