And, sometimes, it is this detail that is decisive when it comes to purchasing, for example, a jacket. Therefore, the lack of pockets where they are needed can leave a man without a purchase. But this situation is easy to fix!
In this tutorial, you will learn how to sew and sew an inside pocket to a finished men's jacket.
You will need:
A patch of lining fabric;Zipper;
Tailor's scissors ();
Tailor's pins ();
Threads and needle for sewing
How to sew an inside pocket
Step 1
For a pocket measuring 17x19 cm, cut a rectangle 40 cm long and 19 cm wide (including allowances).
The size of the pocket also depends on the wishes of the owner of the jacket.
Step 2
Turn the allowances for short sections of the pocket detail to the wrong side, baste and iron.
Step 3
Baste or pin a zipper to short sections with tailor's pins.
Step 4
Attach the zipper with a special foot.
Step 5
Close the zipper only to the middle of the part and turn the pocket inside out.
Step 6
Align the pocket so that the zipper is as high as possible and pin off the side seams with tailor's pins.
Step 7
Sew the side seams. In the zipper area, sew back and forth twice as a bartack.
Step 8
Cut off the zipper tails.
Step 9
Finish open seam allowances with a narrow zigzag stitch and turn the pocket right side out.
The side seams of such a pocket can also be sewn from the front side. In this case, treat the open sections with an oblique inlay.Step 10
Iron your pocket.
Step 11
Delay the pocket around the perimeter.
How to sew an inside pocket
Step 12
Sew the resulting pocket by hand, with blind stitches, to the lining of the jacket shelf.
Exactly the same pocket can be sewn on the lining. How to do this, see.
Important!
The fabric for the pocket and lining should be light but strong. Otherwise, the pocket will weigh down and pull on the lining of the jacket.Pockets are simply an essential element of modern clothing. Jeans, trousers, jackets, jackets, sweaters, shorts and even dresses - all of them can have, and in most cases have, pockets. It is very unpleasant when you take off or put on clothes and find a torn pocket.
How to sew up holes in different pockets
Pockets are of different types, depending on this, the technologies for their repair are different.
Sew up welt pocket
The slit pocket is like the front pocket of jeans. If it is torn from the inside, turn the garment inside out. You will see burlap - part of the pocket, invisible to the eye, usually from a different fabric. Iron it, stitch it on a typewriter in the place of the gap or lay a neat hand-stitch “back needle”. Focus on the traces of the factory seam.
If a product with welt pockets is lined and it is impossible to turn it inside out to get to the burlap, then simply pull the pocket out. Usually holes in such pockets are formed because the seam has parted. At the point of the break, remove excess threads, fold both parts of the pocket inward, sew up the hole with small tight stitches, picking up several threads of fabric from one side or the other. Secure the seam with a double knot, hide the end of the thread inside. Now fill your pocket.
If the material of the welt pocket is leaky, you can apply a neat patch from the inside. Another option is to replace the fabric. To do this, the old pocket is torn off, the details are smoothed and applied to a new piece of fabric as a pattern. Then they are circled, cut out, stitched together along the contour, inserted into the slot for the pocket so that all the seams are inside the product. Small hidden stitches sew a pocket to the product.
Making a patch pocket
If you need to sew on a detached patch pocket (for example, the back pocket of jeans), the product is also ironed in the place of the intended seam. Then, threads are selected that are as close as possible in color and thickness to the original ones. Strictly along the line of the old seam, these threads are used to lay a machine stitch or sew with a “back needle” seam, imitating a machine seam. The threads are fixed with knots on the wrong side of the product.
Jeans lovers will be happy to take note of this material. If only because there is information here on how not to throw away jeans when there is a hole in them. You can freshen up jeans with holes in the most inconvenient places. Then a few examples and descriptions for them on how to restore your favorite thing with your own hands. 
How to sew up a hole in the pocket of your favorite jeans?
It is worth sewing up holes with a special and even creative approach. These can be linings, some bright applications or exclusive embroidery and much more.
And most importantly, in each work there is a special approach. It all depends on the size of the abrasion or hole and its location.
If the hole is under the pocket
Very often there are such holes under the pockets or near the pockets. But how to do the work professionally and, most importantly, discreetly? There is a little secret that is being revealed right now.
Materials and tools
To work, you will need a special tool that will help rip the seams. Then a piece of denim to match the jeans themselves and specifically the place with a hole. As well as threads that match the color. Gossamer to connect the inner lining.
If it is not possible to use denim for the inner lining or it will interfere, you can use a simple thin and very dense fabric. For example, calico or chintz.
Stages of work
patterns
First you need to inspect the place with a hole. You will need to open the pocket to the corner where the hole is. Then attach the fabric for the lining, and mark the area for repair on it. It is always necessary to take with a small margin, approximately 1-1.5 cm from the edge.
Lining installation
The lining will help to fix a small adhesive cobweb.
Line
Everything was fixed, and the work was turned out on the front side. All seams must be done from the front.
Important! Use the thread exactly to match the fabric of the jeans.
Another important point in this skill is that the stitches are best done the same length, as on the canvas itself. Therefore, in advance, on a small passage, practice on a sewing machine, and calculate the necessary seam for work. Often, new-style machines have a number of lines that simply differ in stitch length.
Lay the same lines in the direction of the equity threads. Then you can return the pocket to its place, and sew it in the places of steaming.
Hole in pocket
Many pockets of even purchased jeans are decorated with different elements. So why not use such a wonderful moment when sewing your favorite pants? You can show your imagination in the repair. Then there are a couple of examples of how you can do it yourself.
Here, hand stitches are used in the direction of the longitudinal threads.
Types of hole decor on jeans
Among all the techniques, the decor with a bright print lining is considered the most popular. Looks very nice.
It's pretty easy to do this job. Initially, cut out the required dimensions on a bright fabric so that there is a small allowance of about 2 cm from each edge. Sew neatly from the wrong side or just glue. Further, on the front side, you can carefully or with special design stitches secure the part.
Embroidery
Embroidery is no less popular. In fact, many fashionistas find it very fashionable to have something embroidered.
Why not do it on your jeans?
It turns out not only to hide old scuffs and holes, but also to make them brighter.
Application
An original appliqué can make plain, old and worn jeans the most striking item in your wardrobe.
Use more rhinestones and velvet fabric to the best of your ability, and you can get such a mysterious butterfly.
thermal stickers
The simplest and no less attractive is a thermal sticker.
If suddenly your favorite jacket is torn in the most visible place, and you don’t know what to do, check out our article in which we will tell you how to sew up a hole in a jacket so that it is not visible. There are several ways to make a hole invisible, most of which are universal. Therefore, you should not be upset because of a torn thing, since the situation is not the worst and is completely solvable, even without the services of a workshop. Today we will tell you how to repair a torn jacket, depending on the material of the product and the type of hole.
The jacket is torn - what to do?
Unfortunately, the quality of the material from which outerwear is made is not always satisfactory, sometimes even a new jacket can be torn from a slight snag. To fix the situation, you can use simple methods:
- Sew up (darn) the gap.
- Glue.
- Disguise with tape or reflective tape.
- Apply a payment.
- Use thermal stickers and applications.
Of course, the choice of repair method depends not only on the material, but also on the location of the hole. Agree, you can use a beautiful sticker only where it is appropriate, and sewing up a bologna jacket is not entirely aesthetically pleasing. Next, we will introduce you to various methods for repairing outerwear, depending on the type of damage, and tell you how to seal a bolognese jacket at home. And in order for the thing to become like new at all, there are a few more secrets. For example, you can.
How to close a hole in a jacket along the seam?
The easiest repair method is used if the jacket is torn at the seam. In this case, you do not need to invent anything, since such a hole can be sewn up with threads. Moreover, such a gap can be eliminated even without a sewing machine.
The repair process looks quite simple:
- Choose threads that match the color.
- Turn the product inside out and lay it on the table.
- If there is a lining, then spread it out so that it is more convenient to work with the damaged area.
- Thread the needle and carefully sew up the hole. Try to sew so that the new line becomes a continuation of the old one, and the seam differs as little as possible from the factory one.
- Sew up the lining and turn the product inside out.
If you don't want to open the lining, then sew the jacket with a blind seam. For this:
- Insert the needle from the wrong side of the fabric (so that the knot on the thread is not visible) and sew the hole from the front side with parallel stitches.
- The spacing between stitches must be the same.
- After the hole is completely sewn up, fasten the thread and carefully hide it inside.
Important! Braid or reflective tape will help to disguise a torn seam on a jacket. Tape can be sewn in different ways. In the process of decorating, fantasy will help you. Similarly, you can manually sew up a hole under the arm with an invisible seam. Don't be afraid to experiment with color and length:
- A well-chosen braid can not only mask a torn seam, but also make the jacket stylish and original.
- A reflective tape sewn into the place of a defect or across the entire width (length) of the jacket will not only look spectacular, but will also make the product more visible at night.
Or maybe the tear that has appeared is just an excuse to give things a new life? We offer you some interesting and fashionable ideas:
How to “hide” a hole under a zipper?
If the cut on the trigger is in a place where a zipper is quite appropriate, then use the following trick: insert the zipper into the damaged area.
Important! For symmetry, you can insert a zipper on the other side. This option will not only save the thing, but also give it a kind of originality.
To make a torn jacket look like new, use decorative buttons or rivets instead of a zipper. To do this, cover the slit with a spare piece of fabric (usually sold with the jacket) and punch it with buttons. The result is a decorative element.
If you have more than one demi-season outerwear in your wardrobe, but also high-quality, but not quite fashionable leather jackets, we will tell you.
Bologna jacket repair
The densified artificial fabric - bologna, is made of polymer threads treated with a water-repellent and airtight composition. Bologna jackets perfectly protect from rain and damp fog, so they are perfect for picnics and hiking.
Important! The rubberized material was invented by the Italian engineer Giulio Natta, and the fabric got its name thanks to the Italian city of Bologna, where the inventor lived.
Clothing from Bologna has long gained popularity among many nations, as it is indispensable in the wet and cold season. Unfortunately, the rubberized fabric is not as high tear-resistant as we would like, which is why the owners of such clothes often have to decide how to put a patch on the outside of the bologna trigger, because the material is not so easy to sew up. And there can be plenty of reasons for damage to clothing:
- Burned by a cigarette or hot object.
- Cut (blade or sharp object).
- Leads from a sharp object, such as a nail.
Work materials
In order to repair a polyester jacket with your own hands, you may need the following materials:
- Glue "Super Moment" or KP-1.
- Acetone or gasoline for degreasing.
- A piece of fabric on a patch that matches the color.
- Polyethylene or interlining.
- Application.
- Iron.
- Gauze or soft natural fabric.
A light and comfortable bologna jacket can be sealed in several ways using the materials listed above. Let's consider in detail each method of solving the problem.
Method number 1. Repair with a fabric patch
In order to seal the hole, prepare a piece of fabric and glue that is suitable in size, texture and color.
Proceed as follows:
- Turn the product inside out and lay it on a flat surface.
- Degrease the gap from the wrong side with acetone or gasoline.
- Apply glue “Supermoment” (KP-1) with a thin layer on the patching fabric.
- Connect neatly and evenly the edges of the gap.
- Apply a payment.
- Place the repair site under the press for a few minutes (according to the instructions of the adhesive used).
- Turn the jacket inside out and evaluate the result of the work. If tear marks are visible on the front side, then mask them with an embroidered appliqué, which is sold in sewing and needlework stores.
Important! If a sports jacket is torn, then the place of the gap can be sealed with thematic inscriptions or pictures. You can also put an inner seam and thus sew a torn place on the jacket.
Method number 2. We use polyethylene or interlining
To seal a polyester jacket, prepare: a special dry glue tape (non-woven fabric), a piece of fabric that matches the color, an iron and gauze.
Important! Instead of interlining, you can use ordinary cellophane.
Step-by-step instruction:
- Turn the product inside out and place it on the table.
- Unzip the lining to get to the cut.
- Cut a piece of polyethylene or non-woven fabric to a size slightly smaller than the patch.
- Carefully connect the edges of the gap.
- Attach polyethylene (non-woven) from the inside and carefully level it.
- Place a fabric patch on top of the interlining (cellophane).
- Iron the joint with an iron using gauze or a soft cloth. The polyethylene will melt and securely fix the patch.
- Turn the product inside out and admire the result.
Of course, a line may be visible on the break line, but this is not a problem, because only you will know about it, and the line will not be visible to those around you.
Burnt hole repair
Regardless of the cause of the burn, the hole must be eliminated. The problem can be solved in several ways, depending on the size and style of the product, as well as the size of the hole. Here are a few options for solving the problem:
- If there are various rivets, embroideries or patterns on the clothes, then sew on the problem area additional accessories that match the style of clothing.
- If a whole hole has appeared on the surface of the product, then mask it with patches on both sides (front and back) and a patch that matches in color, shape and style. First, glue one piece of fabric on the wrong side, and cut the second piece of fabric a little more than a hole. Glue the patch on the front side. Disguise the patch with a patch or appliqué. For symmetry, you can make a patch in another place of clothing.
As you can see, there are many ways to “give a second life” to your favorite jacket. Use the option you like, and wear an indispensable thing for a long time and with pleasure. Good luck!
Jeans are in the wardrobe of every fashionista, they are comfortable and durable. Moms actively equip children in denim clothes. But despite their strength, jeans are torn from time to time, and in the most unexpected places. Here, “hands growing from where it is necessary” and female ingenuity will help.
If a hole in the knee can be turned into a creative and fashionable addition to a modern look, then with a shred torn out on the pope, this option will not work.
Mending a hole in jeans between the legs
Holes appear in places of greatest friction. With extensive abrasions, a patch is indispensable. It’s great if there are trimmings left after shortening the trousers, if not, then a flap of a suitable shade can be found in a textile store. When choosing threads, you need to consider their resistance to fading.
We must act with the utmost care. The patch is applied from the inside out. Depending on the capabilities of the machine or hand stitch, the edge of the patch is sewn to the product. The frayed edges of the hole are sewn to the patch using the stitching method. The seams are laid close, close to each other. It does not matter if the machine does not have the function of sewing backwards, you can simply unfold the product before the next seam. With a conscientious approach, the patch will be almost invisible.
Advice! Leather patches on the crotch “a la cowboy” look very impressive, if you are friends with a needle, you can easily upgrade old jeans into a new interesting piece of clothing.
Instructions: How to manually patch a hole in denim trousers at the knee
A hole in the knee for young people is not a problem, but a trendy accessory. Children's pants can be decorated with overhead patches even in contrasting colors. But with the husband’s trousers, you will have to try so that an imperceptible trace remains from the hole. Here, the same thing will come to the rescue. Step by step it looks like this:
- A patch larger than the hole is glued on the left side of the product. For this, it is convenient to use glue.
- The entire surface of the damaged tissue is covered with frequent, closely spaced lines, the so-called piece is carried out.
- If the damage is extensive, then you should be patient, you may have to fill the hole with lines in several approaches.
- We make the stitches even and without tightening so that the patch does not look like a dried mushroom.
For newbies! Glue is applied with the rough side down and ironed with a hot iron through a layer of fabric.
How to quietly patch a hole in the pope in denim pants
The simplest and most effective way to hide a torn tuft on trousers in the buttocks area is to apply an appliqué. An alternative option is embroidery, but there are not so many lovers of embroidery among us, so we will consider the first option. The appliqué can be made from denim, with a beautifully designed overlay patch with a contrasting stitch.
Modern cars have a rich arsenal of decorative seams, it remains only to choose the fabric for decorating the hole to your liking. Modern fashion trends are so diverse that both lace and wool elements will look organic.
Advice! When eliminating a hole, try not to focus on it, sew applications randomly and more, as if it were intended by the designer.
How beautiful to sew a gap in fabric or seams on jeans trousers
Jeans have straight rips, cuts, or L-shaped damage.
When sewing them, the main thing is not to tighten the edges very much, the stitches are made close to each other according to the figure-of-eight principle.
The threads are matched to the tone of the fabric to hide the trace of past damage.
Instructions: How to decorate with sewing finishing elements (embroidery, patch)
Ethnic style jeans look interesting. Here you can use a variety of colors. Threads need to be selected thick so that the appliqué is embossed.
Advice! To simplify the embroidery process, use a small hoop.
Discreet embroideries and appliqués are relevant for men's trousers.
In needlework stores, you can find appliqués and patches for any gender and age, almost all of them are glue-based. That is, it is enough just to attach it to the front side of the product and iron it with a hot iron.
Important! To prevent purchased stickers from coming off during washing, sew them on a typewriter along the edge.
Other methods to mask the gap (resewing trousers)
A hole can be turned from a disadvantage into a virtue. To do this, you just need to add cuts on the legs. For naturalness, you can make a fringe. It is more convenient to do this with a needle, carefully pulling out the threads. It will be interesting to look at gaps with a finished edge. For those who like to draw, you can improve the hole to a curly hole. For example, cut out the first letter of a name or a hieroglyph, and then process the edge with a contrasting or matching decorative stitch.
With a vertical gap, you can sew a zipper into the hole. And if you hide the hole with a patch pocket (you can take it from other old pants), then the jeans will be intact and their functionality will increase.
If the trousers could not be saved, or the restoration went poorly, the Pants can always be upgraded into breeches or shorts. The edge of the product is easy to decorate with a fringe or sew on lapels made of colored fabric.
Tips on how to quickly close the torn sections of the product, if there is no time for needlework tricks
You are already on the threshold, terribly in a hurry. Sat down behind the fallen keys and heard a suspicious crack? or at work there was a nuisance, and the trousers were torn. An elongated cardigan or, if it's hot, a long, loose-fitting blouse will help hide the hole in the top of the pants.
Outside the house, such things may not be with you, so you have to resort to other tricks:
- The open seam can be stapled with a stapler.
- If the bottom of the leg is torn, you can symmetrically tuck the trousers, as if it were necessary.
- The hole in the hip area is easy to drape by tying a stole around the waist.
Jeans are perhaps the most unpretentious thing to repair, with imagination and perseverance, you can not only mend your favorite pants, but also turn them into a sewing masterpiece, a unique item in your wardrobe.