In this article we will talk about the queen of gardens - the rose. We will offer several master classes on how to create it yourself from various ribbons.

Marvelous beautiful flower has delighted and captivated people for hundreds of years. There are countless legends about the rose. different nations. Greek myths tell that a white rose emerged from the sea foam that enveloped the body of the goddess Aphrodite as she came ashore. According to Iranian legend, all the flowers came to Allah and asked him for a new ruler, instead of the beautiful, but lazy and idle lotus. Allah heeded their requests, creating a beautiful white rose with sharp thorns. According to Hindu beliefs, the goddess Lakshmi, the embodiment of beauty, was born from a rose bud. Scandinavian legends say that in the spring, with the laughter of the fire god Loki, the snow melts and roses bloom.

The queen of gardens was a very revered flower among many peoples. In the Roman Empire, winners of battles were awarded wreaths of roses. When Cleopatra received the commander Mark Antony, his path to the queen’s chambers was strewn with rose petals several tens of centimeters in height. In Christian mythology, the white rose is considered the flower of the Virgin Mary. Roses were depicted on the coats of arms of many noble families of antiquity.

There are now many varieties of roses, from the usual shades of pink and red to completely extraordinary ones: emerald green, blue, black and dazzling white.

In this article we will make roses from ribbons. Thanks to the wide variety of ribbons in size, texture and color, their roses always turn out different and beautiful. Such crafts will be great decoration for a hat or handbag. They will become an original brooch, decorate a hair clip or turn into a charming boutonniere.

Ribbon rose

Option 1

Rose made of ribbons 1 cm wide

You will need:

• Tape 1 cm wide (approximately 75-80 cm);
• Needle and nylon thread to match the ribbon;
• Large needle with a wide eye;
• Cloth (you can take a napkin);
• Hoop;
• Coin;
• Pencil;
• Scissors;
• Decorative elements (lace, pearls) optional.

On the canvas you need to draw the outlines of a coin and mark five points along the perimeter at equal distances. Mark the center of the circle.

We fix the canvas on a hoop and, using nylon thread to match the ribbon, embroider a snowflake with five “rays” intersecting in the center. We fasten the thread on the wrong side.

Now take the ribbon and tie a knot at one end. We insert the second end into the eye of the “gypsy” needle.

Let's start embroidering a rose. We pass the needle and tape from the inside to the face in the center of the circle. We have five "rays" of nylon threads. We will pass the ribbon in a circle, alternately threading the ribbon, now above the “beam”, now under it. Twist the ribbon in a spiral. The splendor of the rose will be directly proportional to the number of turns of the ribbon. The tape should not be tightened too tightly, as this can deform the canvas and make the rose petals flat.

After you have reached the required volume of the flower, take the ribbon to the wrong side and tie a knot similar to the first end of the ribbon. Most of the ribbons are quite silky, and the knots can come undone over time. To prevent this from happening, grab both ends of the ribbon from the inside with a couple of three stitches using regular threads.

You can sew several pearl beads into the core. As an additional decorative element, you can use round lace of small diameter. Just align its center with the center of the intersection of the “rays” of the snowflake, which serve to attach the tape. Now you can embroider a rose as described above.

At the end, it is necessary to trim off the excess fabric, leaving the required minimum so that the thread fastening does not unravel.

Option 2

You will need:

• Tape 5 cm wide;
• Needle and thread to match the ribbon;
• Safety pins (you can take any pins with heads);
• Candle or lighter;
• Sharp scissors.

First you need to cut the blanks for the petals. For one rose flower you will need: 8 pieces 10.5 cm long and 9 pieces 11.5 cm long. The edges of all blanks must be melted over the flame of a candle or lighter so that they do not fluff.

We begin to make a rosebud from a smaller piece. Expanding front side away from us and bend the upper right corner down, as shown in the photo. We got a small shiny triangle. Secure with a pin. Now take the lower right corner and fold it from right to left. Secure with thread.

Fold back a small strip of tape along the top edge. Make a couple of stitches along the bottom and secure the bud with a thread.

We arrange the ribbons as before. We bend the upper part of the ribbon by about 7 mm and secure it with pins. We bend the upper corners of the tape down and secure it with pins again, as shown in the photo. We pass basting stitches along the bottom of the workpiece and slightly tighten the petal.

We attach it to the bud, crossing the ends. Sew it on.

We perform all the other petals of both sizes in the same way. We sew them in a checkerboard pattern one by one.

It turns out this is a rose.

Option 3

To create the next rose you will need a soldering iron. Thanks to it, there will be no need to melt the edges of the tapes and gluing the workpieces. If you don't have a soldering iron on hand, you can use a wood burner. Sometimes it comes with a fabric attachment.

You will need:

• Satin ribbon 5 cm for petals (choose the color to your taste);
• Satin ribbon 2.5 cm for green leaves;
• Soldering iron;
• Needle and thread;
• Metal round template for petals;
• Artificial stamens;
• Tweezers.

As a round metal pattern, you can use a cap from baby food or pickles. The size of the flower will ultimately depend on its diameter.

Fold the 5cm wide ribbon in half with the shiny side facing inwards. Now you need to cut out circles with a soldering iron, as in the photo, leaving the lower part unsoldered. For each flower you will need at least 10 such blanks.

The edges of the petals are tightly secured with a soldering iron. Turn them shiny side out onto your face. We sew the unsealed bottom with a stitch. The thread needs to be pulled off.

Fold the stamens in half. We wrap them into one petal and secure them with hot glue. Next, we begin to glue the remaining petals overlapping, like a real flower.

Advice! If you are just starting to try your hand at floristry, and this is your first flower, use Moment Crystal instead of hot glue. The first option is faster and sets in seconds. The second one needs a couple of minutes to glue, and you will have time to arrange the petals in the best positions.

To create the leaves you will need pieces of green tape approximately 8 cm in length. We position the segment vertically and bend the upper left corner so that the upper half of the ribbon becomes perpendicular to the lower (see photo). Now fold the upper right corner (a) with the lower left corner (b). The resulting workpiece has a triangle-shaped top. We unfold the future sheet with the wrong side facing the face. We fold the lower right and left corners together, as in the photo. We cut off the ends a little and melt them over the fire.

Now all that remains is to glue the leaves to the rose.

Option 4

Ribbon rose using kanzashi technique

Materials and tools:

• Satin ribbon 5 cm wide;
• Needle and thread to match the ribbon;
• Tweezers;
• Scissors;
• Lighter or candle.

The number of petals will depend on how lush the rose you want to get in the end.

We cut the tape into squares 5 x 5 cm. We melt the sections over a flame.

Now you need to fold the square in half diagonally. The fold line is located at the top.

We bend the right and left corners to the bottom.

Now you need to cut off the lower corner of the workpiece in a semicircle and glue it, melting it over the fire. If you have a soldering iron, you can use it. This tool allows you to skip the cutting step. After working with a soldering iron, the edges of the petals will be immediately smooth and glued together.

Let's start forming the rose. Roll the first petal into a tube. The folded side faces outwards. We wrap the middle with the next petal and sew it on. Continue sewing the petals overlapping. The side with the folds should always be on the outside.

The result is a rose like this.

Option 5

Chic lush rose made of satin ribbon in champagne color

You will need:

• Satin ribbon (wide);
• Candle or lighter;
• Scissors;
• Needle and thread in the color of the ribbon.

The tape must be cut into square pieces. We cut out rose petals from them so that one of the processed ends of the ribbon is the bottom of the petals. You can take a real petal as a sample. We melt the edges of the cuts over the fire, turning the wrong side towards the flame. After this, the petals will become slightly curved. For one flower you will need from 10 to 15 petals.

For the core of the flower, twist the bud. Take a rectangular piece of tape and fold it in half lengthwise. The fold line is located at the top. We lower the upper right corner (about 4 cm) down to form a right angle. Now fold the lower right part of the folded corner again and secure it with a couple of stitches of thread. We don’t cut it off, we start twisting the ribbon around the package. Every two or three turns, stitch the workpiece with thread. When the bud is of sufficient size, fold the free end of the ribbon downwards. Secure with thread.

Now you need to sew the petals around the bud. We attach them overlapping, as shown in the photo, with the convex shiny front side to the bud.

Now you can attach the leaf and the rose is ready.

Option 6

Miniature rose

Such a crumb will look great as a decoration for a hair tie.

You will need:

• Satin ribbon (medium width) for petals and leaves;
• Safety pins;
• Needle and thread to match the ribbon.

You need to place the ribbon on the table and bend it from left to right about 6 cm.

Take this end of the tape and bend it down so that a fold of 45⁰ is formed. We secure this bend with a pin. The end of the tape looks down.

We bend the second end of the tape up in the same way. We also secure the bend with a pin. This is what should happen in the end.

If we unfold our workpiece, you will see 4 small squares.

Do not remove the pins. We unfold it back and use a stitch stitch to go around the entire perimeter of the workpiece. Now you can remove the pins and tighten the thread a little. We unfold the resulting spherical blank and straighten the petals of the future rose.

Now we make the core for the flower. This will require another piece of tape. Fold its ends crosswise so that top part formed a loop (see photo). With pins you need to fix the place where the ends of the tape intersect. We cut the ends and sew them with a stitch, as shown in the photo. The figure resembles a pentagon with sides different lengths. We tighten the thread and again we get a spherical workpiece, but it does not have a hole in the center, like the previous one.

Now we insert the smaller one into the larger part, thereby closing the hole. The result is such a cute little rose. All that remains is to make leaves for her.

For this you will need a green ribbon. At one end we roll up a cone by simply throwing the edge of the tape over (see photo).

At the second end you also need to make a similar figure. You need to pin the joints of the ribbon and then sew them to the finished rose.

Now you can attach the craft to an elastic band or hair clip.

Option 7

Opened lush rose made of satin ribbon

Materials and tools:

• Satin ribbon of two colors (for petals and leaves) 5 cm wide;
• Glue gun and hot glue;
• Scissors;
• Candle or lighter;
• A decorative element for the core (a beautiful button, a large bead or something of your choice).

Cut the tape into pieces. For one rose flower you will need: 10 pieces 5 x 5 cm, 10 pieces 5 x 6 cm, 10 pieces 5 x 7 cm and 12 pieces 5 x 8 cm.

We round the right and left corners at the narrower side. Now you need to melt all the workpieces over the fire. We pinch the smooth narrow edge, as in the photo. Can be secured with glue or melted again.

Now all that remains is to assemble the flower using a glue gun, starting with the inner circle of the smallest petals. We glue them together. You will need approximately 5 pieces. The next layer and all subsequent ones will be in a checkerboard pattern. We insert a core into the center: a beautiful button, artificial stamens or a bead.

If you want to make leaves, you will need 6 - 7 pieces of green tape 5 x 5 cm. From five we make exactly the same blanks as the petals. We glue them to the bottom of our flower.

We use two pieces of green ribbon to make the base for the flower. To do this, coat the wrong sides with glue and glue them together. Cut out a circle from the blank. It is necessary to melt the edges over the fire.

Now glue the rose with leaves to this circle and you're done. Can be used as decoration for hair clips and elastic bands. Make a brooch, decorate a handbag or hat.

From small roses you can also make a charming and delicate topiary - the European tree of happiness. To do this, crafts must have a flat base.

Experiment, create.

A large number of flowers are made by hand by craftswomen. These are various tulips, chrysanthemums, lilies and roses. All of them are performed in various techniques using different materials. You can make a rose from satin ribbon of different widths.

Rose made of satin ribbon 1 cm wide

It doesn't take much effort to make a rose from a 1cm wide ribbon. Such roses are used in decoration and decoration, to create topiaries and other decorative items. This step-by-step instruction will make it easy to recreate a beautiful flower from ribbon.

To work you will need:

• Tape 1 cm wide.
• Ruler.
• Tweezers.
• Lighter.
• Scissors.
• Glue gun.

Manufacturing process

• Take the tape and measure 15 cm from the edge, turn it back side to yourself. With your left hand, twist the edge to form a corner. Next, they make an accordion in such a way that the tapes are placed one on top of the other alternately. Such an accordion is folded to the end of this ribbon.
• When a small edge remains, the ribbons are connected, twisted a little and released. The result is an accordion.
• Take the long edge of the ribbon and gradually tighten it until you get a beautiful little rose.
• Using tweezers, secure the rosette at the base, and free edge cut with scissors.
• To prevent the rose from blooming, the free edge is scorched with a lighter, thereby sealing it.
• If desired, you can make leaves for this rose. Take 3 squares of green satin ribbon measuring 2.5x2.5 cm. They singe the edges with a lighter and make an inverted petal. To do this, fold the square diagonally, then in half two more times. The resulting triangle is clamped with tweezers and the edges are sealed using a lighter. Thus, three leaves are made. After this, the leaves are simply turned inside out.
• Take a glue gun and glue all the parts of the flower. The result is an original rose with three leaves.

Rose made of satin ribbon 5 cm wide

You can make a rose from a 5 cm wide ribbon. This master class is quite simple, so any craftswoman can handle this work.

To work you will need:

• Ribbons 5 cm wide.
• Glue gun.
• Threads with a needle.
• Scissors.
• Ruler.
• Lighter.

Manufacturing process

• Take a ribbon 5 cm wide and cut into strips 11 cm long. One flower will require 9 strips. The more stripes, the more magnificent the flower.
• Using a lighter, singe the edges of the ribbons. This is so that the work does not fall apart when sewing and everything holds together better.
• Bend one edge along 1 cm, then make another bend, forming a right angle and getting one edge triangular shape. Align the triangle and stitch it with thread, gathering it with an accordion.
• On the other side, fold the tape in the same way, forming an angle, align it and stitch it in the same way.
• The thread is tightened, thereby tightening the ribbon, resulting in a beautiful rose petal. Several knots are made, after which the excess thread is cut off with scissors.
• Using the same principle, 9 petals are made.
• Take one petal, wrap it in the form of a tube and secure it with hot glue. The next petal is coated with glue and fixed to the lower base of the tube. This is done with all the petals one by one, collecting a beautiful and lush rose.

Rose using kanzashi technique

Beautiful and original rose can be done using the kanzashi technique. Her appearance amazes with its beauty and naturalness. In this master class, the rose will consist of 13 petals, which are performed in the same way. You can use photos and videos to recreate such beautiful roses.

To work you will need:

• Satin ribbon 2.5 cm wide, red.
• Satin ribbon 0.5 cm wide, green.
• Red threads with a needle.
• Scissors.
• Soldering iron.
• Lighter.

Manufacturing process

• Cut a ribbon 2.5 cm wide and 7 cm long. Take a needle and red thread, fold the corner of the ribbon on one side and stitch it along the ribbon. Similarly, fold the corner of the tape on the other side and stitch it. The tape is tightened and several knots are made. The remainder of the excess thread is cut off with scissors. It turned out to be a petal for a rose.
• When all 13 petals for the rose are ready, they begin to collect the flower.
• Make a center for the rose. Take any one petal and begin to twist it, making the middle. After twisting, this tube is stitched with thread, fixing it. The excess thread is cut off. The bottom of the middle is also cut off and sealed with a lighter.
• After this, you can begin assembling the rose. Take a glue gun, coat the first leaf and glue it to the middle. All 13 petals are glued in this way, alternating them with each other, forming a wonderful and lush rose.
• The bottom of the rose is melted with a lighter to remove all the irregularities. Spread each petal of the rose to give it a lush look.
• They take narrow tape green, 0.5 cm wide, cut a 3 m long piece and cut it diagonally using a soldering iron. These leaves are glued onto the rosette in the amount of 6 pieces in a circle.

All these roses will look great both on a stem and if used on a headband. They will look voluminous and lush, and bright colors will add their own flavor.

Video on the topic of the article

Creating a charming flower is quite simple, if only you had the desire and ribbons the right size and some free time

With this master class you will make a charming decoration with your own hands - a rose from satin ribbons using the kanzashi technique will complement a hairpin, hoop or bracelet. It can also be pinned as a brooch or an elegant boutonniere. Step-by-step instruction with photos will help you assemble the composition correctly, easily and quickly.

Materials and tools for the master class

To make a rose from satin ribbons with your own hands you will need:

• satin or silk ribbons in soft pink and dark olive shades, 2.5 cm wide;
• felt square white size 6x6 cm for the base;
• golden-colored brocade ribbon 0.6 cm wide;
• candle and matches or lighter;
• tweezers with a long sharp nose;
• hot glue gun or all-purpose glue;
• scissors;
• ruler.

If you have never worked in this needlework technique, we recommend it.

Step-by-step instructions for assembling a rose from ribbons

Take a soft pink ribbon 2.5 cm wide. Using scissors, cut it into pieces 6 and 5 cm long. In total, you will need 33 pieces 6 cm long and five 5 cm long.

Now you need to prepare the petals for the rose. Take a 6 cm long piece and tweezers. Fold the top right corner of this piece towards the bottom side.

After this, fold the corner formed at the bottom in the opposite direction to the starting line.

Holding the element with tweezers, melt its bottom over the flame of a candle or lighter.

Repeat exactly the same on the other side. One petal is ready!

In the same way, make petals from the remaining pieces of 6 and 5 cm. Please note that petals from pieces 5 cm long will turn out sharper, and from pieces 6 cm long - wider.

The next step is to form the leaves for the rose. Cut the dark olive-colored ribbon into 10 cm pieces. Also cut the golden-colored brocade strip into 10 cm pieces. A total of eight pieces of each tape are needed.

Place one brocade piece on top of the satin ribbon on the left side.

Fold the olive piece in half lengthwise. Melt and seal the edges on the side where the brocade is.

After that, cut this piece in half diagonally, starting from the side you just sealed.

Melt over the fire and seal the entire cut bottom edge with your fingers or tweezers. The first sheet is ready! Make the remaining leaves in the same way.

Now it's time to make rose buds. Cut a neat circle from a 6x6 square piece of felt.

Using tweezers, roll up the petal that you made from the 6 cm piece into a “tube”.

Wrap this petal with another one. Secure with glue on the bottom side. This will be a larger bud.

After this, roll another petal into a “tube” and secure it at the bottom with glue. This will be a small bud.

Glue each rose bud inside the leaves.

Glue a simple leaf and two leaves with buds onto the felt base.

After this, attach the remaining leaves to the base.

The final stage is assembling a rose from satin ribbons. Glue six petals made from six-centimeter pieces into the middle of the base.

Glue a second tier on top of the first, also consisting of six petals.

Add the third tier in the same way.

From six petals made from 6 cm parts, make four buds. Make two from one petal, and two from two petals. This step is optional, and if you prefer, leave it as is.

Glue these buds into the leaves around the perimeter of the flower.

Twist the remaining five petals into a neat bud. When creating this element, wrap each petal opposite the previous one. This way your bud will be symmetrical.

Glue this bud into the middle of the rose.

This is how easy it is to make a rose from a satin ribbon with your own hands. There are many options for how you can use it. It all depends only on your goals and imagination!

See other master classes on making. Make hairpins, headbands and jewelry for adults and children, for yourself and as a gift!

We make roses from satin ribbons with our own hands

We make roses from satin ribbons with our own hands

Modern needlewomen have long liked to do everything with their own hands, and they especially liked satin ribbons and flowers made from them. This is understandable, because these miniature flowers, namely ribbon roses, will delight everyone. You can make them yourself, but without spending a lot of time and money. Roses made from satin ribbons decorate everything that is surrounded by them. This could be clothes, hairpins, or holiday gift wrapping. In general, roses made from satin ribbons are universal decoration, which will brighten up your life.
In order to make such a cute little thing, you don’t have to be an experienced craftsman; even a novice craftsman can do it with his own hands.
Our master class (mk) for beginners will tell you how to make satin ribbons beautiful roses. And photos and videos will help reinforce the lessons of skill. Let's start learning how to make roses from satin ribbons with our own hands.

Necessary equipment

Our lessons will be almost the same, so the material you will need is basically the same. Distinctive feature, there will only be a color scheme. To conduct a master class, we need the following accessories:

• pink ribbon, preferably satin;
• sharp scissors;
• needle and thread;
• a lighter or matches, with their help we will burn the flower so that it does not begin to bloom;
• pencil, ruler and paper, they will help us in creating a sketch;
• glue;
• felt.

Rose Kanzashi

To create a kanzashi rose, we need a pink ribbon, ninety centimeters long and 6.5 cm wide. Let's start the kanzashi lessons:

• you need a pink ribbon, which we fold lengthwise into two halves, the wrong side should be on the inside;
• make a mark on one side of the tape, it is advisable to do it all at an angle of 45 degrees;
• do not cut the thread, but continue basting until the very end;
• pull the thread so that your pink ribbon comes out like an accordion;
• in order to form a rosebud, turn the corner, stitching it several times;
• Now all that remains is to twist our assembled kanzashi satin ribbon around the bud. When performing such manipulations, be extremely careful, correcting the central part of our work, and securing its turns. Only then will the Kanzashi rose and its assembly look beautiful and attractive.

Remember to make the seam as close to the center as possible.
Once your satin ribbon rose is almost ready, secure it again with small stitches. Now you are convinced that the Kanzashi rose is also suitable for beginners who can easily make it with their own hands.
Our first master class is successfully completed, let's move on to the next one. If you do not understand this matter well enough, you can view current photos and videos to reinforce these lessons.
Thrifty craftswomen can always find remnants of unused ribbons, beads and threads in their bins. This is a good habit that will work in your favor. Because, even from leftover material and ribbons, you can make beautiful kanzashi things with your own hands. Let's try to repeat our lessons step by step.

Making a rose from the remaining ribbons

Before you start the master class (mk), decide how many and what scraps you have left. Since the piece of tape should not be less than ten centimeters. If it is less, then the rose will not be lush. The shade of a rose from ribbons is, of course, better to do delicate color, and pink ribbon is best.
Let's move on to repeating this master class, so:

• We start by taking a pink ribbon and forming a bud. We do it this way, bend the end of the ribbon and pin it with a pin, sew it with thread;
• we do the other end, step by step, in exactly the same way as the first;
• Let's start making petals. The rules for their formation are exactly the same as in a bud. Only in this case, we do not sew with thread, but make stitches along the entire length;
• pull the ribbon and wrap it around the rosebud, we have the first tier of petals;
• We do the rest of the petals in the same way, securing them at the base.

And we have overcome this stage. And for those who do not fully understand our lessons, we recommend viewing photos and videos on our portal.
And finally, our final master class, in which we will learn how to make satin roses for a bouquet.

Roses for a wedding bouquet

First, we need to do the main part. For this, we will need felt. On it, we will draw a circle of 6-10 cm. We cut out a circle with scissors, and remove another small piece from it.

Let's start laying out the satin ribbon. Fold it, wrong side inward, to form a square. It is necessary to sew in the central part with thread. Hold the cone with one hand, and with the other we hold the end of the tape and place it on the base, bending it 90 degrees. You should have a square with a triangle on it. Hold the triangle with your hand and do the same manipulations. Depending on the diameter you choose, the number of such movements will continue.
After you can make several of these flowers, we begin to form a bouquet, and it is done this way:

• for the handle of the bouquet, we will need several pencils connected together with a satin ribbon;
• to them, using glue, we attach a foam ball or a wad of paper wrapped with tape. We attach our roses to it, decorating them with pearls;
• we turned out great bridal bouquet, which will look great in the hands of the bride, as in the photo.

Our lessons for beginners are not as difficult as they seem. We hope that you enjoyed the master class we offered. We invite you to view interesting video, and the photo can be seen on our website.

Video: Kanzashi flowers

Common things (jeans, skirts, blouses, bags and even home textiles) can be made much more attractive with the help of decorative elements. For this purpose, butterflies, flowers and other cute details are used. But to decorate an item exclusively is quite expensive. So why overpay if you can make your own roses from satin ribbons, and then use it as a unique decor?

Today it is not a problem to purchase satin and satin ribbons of any width and a wide variety of colors. Our goal is to reveal the secret of making a designer flower at home. We tried to choose the most available master classes, training on the basis of which does not even cause any difficulties. So, now you will learn how to make a rose from a satin ribbon and see a step-by-step photo.

Making a satin rose from a wide ribbon

For work, purchase a needle, threads in the color of the ribbon and directly wide tape from satin. The tape should be 6.5 centimeters, it will take a little less than a meter.

WITH wrong side Fold the tape in half and mark at a certain angle (45 degrees). In this case, the tape should fold diagonally. Now baste the product along the edge, and you need to finish the process at the same angle at which you started.

When you pull the thread, the ribbon will come together. Fold the very edge into a bud and sew it to secure the product. Now wrap it around the bud assembled tape, not forgetting to periodically stitch the product for strength. Also secure the very end of the tape with a thread and needle.

Making rose stock

This version of the rose is different in that it does not have a pronounced bud, so the resulting flower even somewhat resembles a carnation. Buy 50 cm of 65 mm wide ribbon, matching thread and a needle.

As in the first case, to make a rose from a ribbon you need to fold the satin blank with the wrong side and baste along the edge. When the ribbon is gathered, twist the very first curl tightly and gradually wind the ribbon, fastening each turn with stitches. Similar manipulations can be done with ribbons of different widths, and then the flowers will turn out different from each other.

Little roses

Miniature roses are needed for decoration wedding dress, artificial bouquets and decorative compositions. Now we will tell you how to make roses from satin ribbons with your own hands and describe the entire master class step by step:

1. To make roses from satin ribbons, buy 1 meter of ribbon 10 mm wide (can be in a reel so that the product does not get tangled).
2. Wrap the very end of the tape at a right angle.
3. By folding the ribbon three times, you will get the core of the flower.
4. The folded section must be fixed using firmware.
5. To make rose petals, wrap the free end of the ribbon around the bud and each time sew on elements to secure it.
6. Bend the remaining tip of the tape, wrap it around the resulting flower and secure with stitching.

Rose from leftover ribbons

If you have a lot of small pieces left over from ribbons, but you don’t want to throw them away, use them to make multi-colored roses. It is important that the segments are at least 10 cm in length. Additionally, before work, stock up on scissors, a needle and thread. So, let's start our master class:

• it is necessary to bend the edge of the tape at a right angle;
• bend the edge again and then secure it with a tight stitch;
• in order to make a flower petal, you need to take the pieces and fold them at right angles on 2 sides, then sweep the edge and pull the workpiece by the thread;
• the petal should be attached to the bud and secured with stitching;
• We repeat the last manipulation with each petal-shaped blank, and firmly fix the last one so that the rose does not fall apart.

How to make a rosette from a satin ribbon: step-by-step photos

Now we will tell you how to do it simple rose in a short period of time. So, let's get started:

1. We buy a thin green satin ribbon (3 mm wide) and a red, white or pink ribbon 10 mm wide. We also stock up on a dinner fork (don't be surprised!).
2. Thread the ribbon intended for making a rose between the tines of the fork (make 3 or 5 windings on the tines).
3. Without removing the ribbon from the fork, take a needle and matching thread and sew all layers of the ribbon with one stitch.
4. Do the same on the other side of the tape, but after removing the product from the fork.
5. At the place where the thread is stitched, tie the rose with a green narrow ribbon.
6. Starting with the topmost petal, begin picking apart the rose leaves using your fingers.
7. When all the petals are sorted and given the right type, we finally form the flower and sew leaves twisted from green ribbon to the wrong side. The product is ready!

How to make a lush rose from a satin ribbon with your own hands: step-by-step photos

Almost all homemade roses are similar to each other, but there are still some differences. Some flowers turn out flat and bulky, while others look convex and almost believable. To work, stock up on thread with a needle, hot glue, a pin, a lighter and the main element - a satin ribbon about 1 meter long.

Tip: to prevent the tape from fraying during operation, its edges can be carefully scorched with a lighter or candle flame.

Stepping back a couple of centimeters from the very edge of the ribbon, fold the fabric at a 30-degree angle, and then fold it again at an angle down the edge of the ribbon. When making stitches, starting at the bottom and moving to the right, move exactly along the edge. After this, bend the edge of the tape upwards and away from you and sew the product along the edge.

The more folds you get, the more voluminous the rose will be. To assemble the element, pull the thread, gathering the edges of the rose into one place. Make the middle of the rose by twisting the central petals into a tight knot and securing it with hot glue.

As you can see, making roses from satin ribbons is not very difficult: the main thing is to follow the instructions, and sometimes show your imagination, as in the case of self-production or, which can also be decorated with flowers. Decorate yourself and your home with cute satin roses, it's so feminine!