How to cut your own hair at home. We cut the hair on the bangs in a straight line. Why split ends

Often, beauties have the question of how to cut their own hair. You may not be able to find the right stylist, are on a long business trip or just experimenting with the image. But so that the result does not cause disappointment, you need to know how to get down to business.

What to consider before cutting

Every woman at least once wanted to cut her own hair, thinking: “Is it really so difficult to cut off the ends?” But celebrity stylist Andrea Clair warns that it usually takes 2 weeks to tell the difference between a master and an amateur, and it can take up to 2 months to fix homemade haircuts.
If you've got your eye on a structured model, don't try to do it on your own. Also weigh the decision, because many women take up scissors after an unpleasant event occurs in life. Do you want to start new page in life immediately, so you're trying to mark the transition with a haircut? It is highly likely that you will spend a lot of money on a stylist who will correct the damage.
To try your hand, choose simple models that do not require precise lines. If you are wearing a pixie or bob with torn strands, an attempt to trim them yourself will end in failure.

What will you need

Before you get down to business, arm yourself with the following tools:
Sharp scissors must be purchased from a professional store. Do not use sewing or kitchen utensils, otherwise you will have to forget about an acceptable result.
Hairpins will be needed to separate and fix the strands.
A spray bottle is required to moisturize the hair.
You may see recommendations to cut dry strands, but implementing them at home will be problematic. Stylists do the job using special scissors, but you have neither the tool nor the qualifications. The hair must be wet in order for you to get an acceptable cut.

How to cut bangs

Most often, home hair experiments are that beauties are trying to cut their bangs. Follow the sequence of steps:
Lightly spray the strands with water from a spray bottle.
Push excess curls out of your face and pin up to make the job easier.
When you cut, do not pull your hair with your fingers, otherwise the bangs will be too short.
Do not hold the scissors parallel to the floor, otherwise you will make a blunt cut. It will be difficult to fix it even in the salon, so turn the blades at an angle and thin out the bangs with their tips.
Always cut less than intended, because this will give you the opportunity to correct the result. Coping with the task is not always easy, but if necessary, you will trim the bangs yourself.

How to cut your hair

If you want to do more complex hairstyle, follow the instructions:
Wet your hair, comb it.
Divide it with a central parting, making it as even as possible. Carelessness in the design of the haircut is unacceptable, so take the stage seriously.
Pull the strands back and gather into a ponytail at the base of the neck. Make sure it's in the middle.
Fasten the ponytail closer to the ends with an additional elastic band. Cut off the curls just below it.
Remove the rubber bands, evaluate the result of your efforts, trim if necessary.
Profile the hair using special scissors.
By adhering to these rules, you will, if necessary, make your own hair.

How to get rid of split ends

Perhaps you are not striving for cardinal transformations, but want to get rid of damaged hair cov. In this case, you will need instructions:
Comb your hair, divide into small strands.
Twist each of them into a tourniquet; walk along its length, cutting off protruding hairs.
Why is the method better than a simple trim? The fact is that you will get rid of damaged hair along the entire length and get the best result.
Another option is called "Rings": you will need to wrap your finger around the end of the strand and cut off the protruding hairs again. You can combine techniques to get the perfect result.
Although cutting at home is not a good idea, some women manage to master the technique. Check in practice whether you are one of them.

The hair periodically splits, and the damaged ends give the hairstyle an untidy look. It is useless to treat them, so you have to cut them off. If there is no opportunity to contact the master, you can learn how to cut the ends of your hair yourself, and after several such procedures, confidently update your hairstyle in 10 minutes.

Is it worth it to use the services of a professional hairdresser to cut only the ends of your hair? This simple procedure, although it requires skills, but having mastered it once, you can forever get rid of the need to spend time and money on going to the master, rendering a good service not only to yourself, but also to your family members.

How to handle cutting your own hair

For an independent haircut, you need to clearly understand what exactly to do with the strands and how exactly to wield the tool, so that in the end you get even, neat or competently torn lines.

Trimming of the tips should be carried out with professional scissors in a well-lit room.

For those for whom the experience of self-cutting at home will be the first, cut split ends evenly long hair The diagram below will help.

Preparing for a haircut

It is unlikely that it will be possible to make a high-quality cut with a blunt or unintended tool. A haircut has a chance to look perfect if used:

Professional scissors.
Thin comb.
Spray bottle filled with water.
Strand fasteners.
Iron.
Mirror.
Thinning scissors - if needed.

When all the tools are in place, it's time to prepare the hair: comb it thoroughly and spray it with water. Wet curls are easier to straighten.

If there is a bang, approach its design with special responsibility. Firstly, at the front lines, any oversight is immediately noticeable, and secondly, since you are evening the ends anyway, why not slightly correct the hairstyle at the same time?

Bangs can be different lengths and density, but in shape it happens:

Straight.
oblique.
Triangular.
Arcuate.
Torn.
Multilayer.

It is fundamentally important to choose a form that not only likes, but also fits:

A “heart” or triangular face is transformed when it is decorated with a long asymmetrical bangs, hiding almost the entire forehead.
A rectangular and elongated face requires a wide and thick bangs to the eyebrows.
A long braid suits chubby women.
For oval face any shape is fine.

It's amazing how quickly you can get prettier with such a small change in the image! Therefore, if the length allows, you can take a chance and bring to your appearance new element. Wherein great importance has knowledge of the basics of such a haircut:

The width of the bangs should not go beyond the temples.
Its density is directly proportional to the depth.
If in doubt about the length, it is better to leave the maximum possible so that, if necessary, it can be corrected.

Having chosen the option that suits you, you can start cutting:

Separate the bangs with a straight line, pin the rest of the strands with hairpins.
If the bangs are thick, divide them into several horizontal rows.
Twist each row into a bundle and secure with a clip.
Leave the bottom row free.
Lift its middle with your index and middle fingers, creating a right angle.
In the other hand, take the scissors at an angle of 45 degrees to the raised row of hair, then the cut will be even.
Determine the length of the bangs, considering that after drying, it will rise by 2-5 mm.
Carefully cut off its middle, and align each side along it.
Release the next horizontal row of strands.
Cut it a couple of millimeters lower than the previous one.
If there is a third row, repeat the procedure, again slightly lowering the length. So the shape of the bangs will be clear and even.
Dry your hair with a hair dryer.
Straighten with an iron.
Adjust the cut if necessary.

In this simple way, you can achieve a perfectly straight line.

Oblique bangs are done according to the same principle, only with oblique cut. In this case, the top point is usually at the eyebrow line, and the bottom point is at the middle or tip of the nose.

For oblique bangs, after creating an edging line with thinning scissors, cuts are made in the middle of the strands and at the level of several centimeters to their tips.

Bangs are easy to cut, because the result of any action is immediately visible in the mirror, and it can be easily controlled. What to do with cutting the ends of long hair?

This procedure is not so simple, but you can adapt to it:

Comb, preferably with a wooden massage comb.
Wash them and dry them with a towel.
Use a fine, wide-toothed comb all the way through, as needed, starting at the tangled ends and working your way up to the roots. In this case, direct the movements from top to bottom.
Draw a horizontal parting from temple to temple and separate the resulting strands.
Visually break them into several narrow horizontal rows, leave the bottom one free, twist the rest into a bundle and fix it on the crown with a clip.
Comb the loose strand.
Pass it between two fingers and tighten, lowering your hand to the desired length.
Cut off the ends in a clean motion.
Remove the worked row of hair to the side, release the next row, grabbing part of the strands from the previous one for a guide and repeat the procedure.
Thus, go through the entire hair.

There is a more unusual and convenient technique for shortening hair - this is a “haircut in the tail”. You can execute it like this:

Gather a tight low ponytail.
Pull them with elastic bands along the entire length every 2-3 cm.
The last elastic band fixes the strands directly above the future cut line.
Cut off the end with sharp professional scissors.
Loosen the curls.
Collect the side parts in a bundle at the crown, divide the rest with an even parting in two and throw it forward.
Take one of the parts, comb, pull the strand between your fingers and cut the ends evenly.
Repeat the procedure with the second part.
Unravel the collected bundle.
Repeat the cutting procedure, focusing on the existing cut lines.
Carefully comb all the curls and check the quality of work with the help of two mirrors.

A haircut in this technique is more suitable for owners of thin and even hair. The result is a semi-circular cut.

How to make a straight cut?

Eat simple rules for the perfect cut:

Use professional scissors and a fine-toothed comb.
Cut clean, well-moisturized and combed hair.
Hold a strand tightly between your fingers.
Use multiple mirrors to correct lines.

Wet, carefully combed hair, tightly fixed and stretched between the fingers, as well as the use professional tool- the basis of high-quality self-cutting tips.

How to simulate thinning?

Filtration is not simple procedure as it might seem at first glance. Properly done thinning can add missing volume to the hairstyle, give it softness or focus on some element. You can thin your hair both at the ends and at the roots.

Thinning at the tips happens:

Horizontal
The strand is fixed between the middle and index fingers, and with special scissors at a right angle, about 4-5 mm are cut off.
vertical
The strand clamped between the fingers is pulled to the side, and the thinning scissors “slide” along it, without completely closing.
"Teeth"
The ends of the strands are pulled out and worked with scissors at an angle of 45 degrees at a distance of about 5 mm.

Thinning at the roots is performed across the curls: first at the base of the hair, then in the middle and at the end. She makes her hair voluminous. This is a more complex technique, so it is better to entrust it to a professional.

Thinning should not be done if the hair:

Thin and rough.
Painted with hydroperite.
They were chemically treated.
Of red color.
They have curls of different sizes.

In these cases, thinning can only aggravate the condition of the hairstyle, giving the hair a painful and unkempt look.

But she decorates

chubby girls
if done in combination with oblique long bangs.
Triangular face type
strongly sparse.
short-haired
allows you to create elegant or, conversely, mischievous images.

Usually thinning is performed with special scissors, but you can do without them. Using an ordinary sharpened tool, you can do:

"Slicing"
The combed and moistened strand is passed between the fingers and pulled to the side, and with the other hand, using half-open scissors sliding along the length of the hair in the direction of the lines of the future haircut, thinning is done. This technique creates volume at the roots and gives lightness to the hairstyle.
"Mush"
In this case, the sliding cut is performed in a semicircle. After this treatment, the hair is divided into separate, slightly curving strands. The method is used not only as an element of the haircut technique, but also to create a complete image.

For horizontal thinning, the following methods are used:

"Vychip"
The strands drawn perpendicular to the head are cut off on different levels. Thus, the natural volume of the hairstyle is corrected.
"Piquetage"
The hair is combed against growth, and the protruding strands are milled with the tips of scissors at an angle of 45 degrees. This method is well suited for short haircuts.
"Tourniquet"
A small strand of combed wet hair is twisted into a bundle with a diameter of 5-10 mm and light, neat cuts are made with different parties along the entire length. Thus, all the hair is worked out, giving additional volume to the hairstyle.

The main secrets of cutting the ends

So, a high-quality haircut of the ends of the hair can be done on your own, if you know and use the main secrets in your work:

It is necessary to cut with special well-sharpened scissors.
The work uses a thin comb with rare teeth.
Before the procedure, the strands must be combed, washed and dried with a towel, and then decide how much the ends will need to be trimmed. 1-2 cm is usually enough to update the hairstyle.
When working, it is important to consider that the hair will jump by 2-5 mm after drying.
To get an even cut, some use a contrasting background for convenience: dark hair cut off on a light background, and vice versa.
You can smooth out slight irregularities with the help of horizontal thinning.

Elimination of split ends of hair

On average, hair grows at a rate of 1-2 cm per month. But sometimes it is imperceptible, because they split, and the split ends spoil the overall look of the hairstyle, and you have to get rid of them.

If you want to grow long strands, trim the ends as they cut but preferably not more than once every three months. And it is better not to allow a bifurcation of the hair shaft at all. To do this, constantly feed and moisten your "antennas".

But if the curls have already split and become confused, the only way out is to cut the split ends. It is believed that such hair manipulations are best done on the growing moon.

How often to trim the ends of your hair

Many women who dream of long braid, are interested in: “Why and how often do you need to cut the ends of your hair, does it really make them grow faster?”.

The question of the frequency of haircuts is quite individual. To save model haircut they are cut once every 2 months, and if you want to grow long hair, provided that they look healthy, you can do this once every six months.

As for the frequency of haircuts to accelerate growth, this is more of a myth than a reality. Just after the split ends are removed, the hair becomes healthier and grows much faster. This is the whole answer.

That is why it is important not only to eliminate, but first of all, to prevent split ends, dryness and brittleness of the strands.

Hair can be cut not only in hairdressing salons, but also at home. Especially if you just need to trim the ends. The main tools for the procedure are professional scissors and a thin comb with rare teeth.

It is not so difficult to make an even cut on your own hair, even if it is long. Using the haircut techniques described above, you can trim the ends and experiment with the shape of the bangs.
Small irregularities are eliminated with the help of thinning, but only owners of strong and healthy strands can count on its help.

Constantly practicing home haircut tips, you can save not only time, but also family budget.

Video: how to cut the ends of your hair evenly at home

Today, many women do not have time to go to the salon to put their hair in order. In this case, there is a way out - to learn how to cut the ends yourself. We'll talk about how to cut the strands in today's video.

It is quite possible to professionally cut a man's hair at home. You just need to practice a little, choose the right tools and accessories, and you can safely get down to business.

Rules for men's haircuts

You can cut men different ways- scissors and machine. Each master chooses for himself the method that suits him best. However, it should be borne in mind that creating a hairstyle with scissors is a more time-consuming task. And it is best to resort to such a method only if you feel enough strength, experience and skill in yourself.

The best option is to create a hairstyle with a hair clipper. It is faster, more convenient, and less traumatic.

In any case, before starting a haircut, you need to stock up on a whole hairdressing kit, which includes:

clipper
comb
regular scissors
thinning scissors

Start a haircut with what, as in professional salon, cover the man with a sheet. This is necessary so that the cut hair does not fall behind the collar and does not irritate the skin. And then it will be much easier to clean up the place of the haircut. Comb your hair thoroughly.

Remember that it is best to cut a haircut on clean hair Oh. They are more obedient and lighter. If the hair is slightly damp, it's even better.

Depending on how long you are going to cut your hair, choose a clipper attachment. Naturally, the easiest way to cut your hair is shorter: this way there are fewer chances to make a mistake, and it is more convenient to drive the machine over the head. For more long haircuts choose long nozzles.

Start cutting from the back of the head. The technology of the process is as follows: put the nozzle tightly enough to the head and start moving the apparatus from the back of the head to half of the head. Drive the machine as if you were pushing it forward slightly. This will help make the haircut more even. Everything that remains superfluous can be corrected with scissors.

If you plan a uniform haircut with a clipper, treat the sides of the head and the front in the same way. But in case the hairstyle should be more artistic, you will have to pick up scissors.

Go to the top uncut part. Comb all the hair forward, then take strands no more than a centimeter thick and, holding it between your fingers, carefully move along it with scissors, cutting off the excess. It is best to use the scissors at an angle, this will help to avoid too sharp cuts.

Don't forget the bangs too. Comb it down, take the scissors so that they are pointing vertically up and make neat cuts. For a smooth transition of the strands, cut at an angle.

Correct all imperfections with ordinary scissors. This will not violate the integrity of the hairstyle, and will help to eliminate defects as accurately as possible.

Finish the haircut by processing the hair with thinning scissors. They will provide the perfect result, leveling all the strands naturally. Comb your hair again, check the haircut for imperfections. If these were not found, you can show the man the result.

What to consider when creating a professional men's hairstyle at home

At home, you can easily learn how to cut a man's hair according to accepted standards. However, modern gentlemen quite often began to choose original haircuts artistic or even futuristic. It is better not to hurry with their independent execution. Experts recommend that you first take special courses in which you will be taught how to create such masterpieces. Alternatively, you can explore how to create creative haircuts online video courses.

If you decide to cut your own hair, the reasons can be very different: for example, you have a craving for hairdressing creativity, you want to save money, or you are simply tired of the dull look of your hairstyle day after day. Here are some basic principles, borrowed from the curriculum for professional hairdressers to help you get started.

Steps

Hair preparation

Wash your head. Just as an artist starts a painting with a blank canvas, you need to start a haircut with clean hair. Dirty hair and leftover hair won't let you see the real finished result when your haircut is done.

Use shampoo and conditioner for a specific hair type. They come in a variety of colors (for color-treated, dry, damaged, sparse hair and hair without volume), so choose the one that best suits your hair type and its features.
If the hair becomes tangled and prone to tangles (this is often the case with hair that has been chemical attack or discoloration), use a conditioner or anti-tangle spray. When you comb your hair, the comb should not get stuck in them!

If you cut your hair with scissors or a razor, leave it damp. On wet hair it is better to see how they lie from nature. In addition, it will be easier for you to follow the instructions for the haircut, and it will be more consistent with the sample.
- This is only true for straight hair. Cut curly or Wavy hair wet is difficult, because because of the water they will temporarily straighten out and will not lie as usual. Because of this, you can cut them incorrectly and end up with a messy haircut structure (for example, cutting one curl completely and the other half, which will make them stick out).
- Wet hair sticks to each other and lies better in the process of cutting (less likely to accidentally brush it off or blow it off in the wrong direction).
- Keep a spray bottle of water handy so you can moisturize your hair if it starts to dry out while cutting.
Work with dry hair under special circumstances. Hair must be dry if you cut it with a machine or, for example, want to thin it a little, but not remove too much volume.
- Cut your hair dry if you want to trim split ends. They are easier to see when the hair is dry.
- If you're short on time, dry cutting saves you the hassle of washing and drying.
Haircut choice
1. Determine the shape of the face. The hairstyle should match the shape of the person's face and features.
  
  Find detailed instructions for a particular haircut. When it comes down to it, you need to know how to act! Try to find out as much as possible about the haircut you are interested in.
  - Watch videos online. Search YouTube or hair care websites for videos that show you how to cut your hair step by step. Make sure the photo is taken by an experienced stylist, not an amateur.
  - Flip through hair magazines. Some magazines offer photo tutorials to show you how to cut your hair.
  - Look at websites owned by companies that make hair care products. Companies that make and/or sell hair care products often post instructions on their websites. Instagram and Pinterest are great sources of inspiration too.
2. Familiarize yourself with the terminology. You need to understand some of the technical terms that stylists use when talking about cutting hair so that you can more easily follow the instructions.
  - The angle indicates the position of the scissors when cutting; you can hold them vertically, horizontally, or at a 45 degree angle.
  - The angle of the strand shows the direction of the hair during the haircut, or rather, the angle between the strand and the surface of the head.
  - Milling is a technique that is used to create thin layers, volume reduction and thinning hair.
  - Haircut in layers means that the hair will be of different lengths. Long layers create the illusion of length, while short layers add volume.
  - Graduation is a hair style where the hair is cut shorter and shorter towards the back of the head to create a fuller shape.
  A haircut
  1. Divide your hair into sections. Hairdressing courses teach standard techniques: division into 4, 5 or 7 sections. This is how hair is divided into 7 sections: crown, right temple, left temple, right and left crown sections, right and left occipital sections. Leave a strip of hair one centimeter wide hanging freely along the growth line.
    - Start by creating a clear separating line from a point just behind the ear on one side to a matching point on the opposite side. Next, make dividing lines on both sides of the head, right along the parietal ridge, to separate the hair at the crown.
    - Comb your hair gently towards the center of the crown section, twist it into a knot and secure with a bobby pin. Do the same with the hair of the right and left sections behind the temples.
    - Now make a parting in the middle of the back of the head. Separate the right and left parietal sections, parting along the line behind the ears to the parting just created at the back of the head.
      - These horizontal partings should follow the shape of straight horizontal lines along the back of the head.
      - Comb these sections by smoothing them out, then roll and pin as you would the previously created sections.
    - The remaining two sections - the right and left back of the head - easily turn into two separate sections.
    - Once you've secured all the sections, go over each section and run a 1/2-inch strip along the outer edge (aka the perimeter or hairline), and twist and secure the sections again.
  2. Follow the hair styling instructions. In some cases you will start at the back of your head and move towards your face, in others you will start in front, and in still others you will move around the perimeter. Hairstyles are different and require different plans offensive.
    
    Work slowly. Keep in mind that a typical visit to the hairdresser can last from half an hour to an hour and a half. You do not professional stylist, so it will take you even longer to complete the haircut. Take your time. An uneven haircut can be fixed by a professional, but a haircut that is too short can only be fixed with time.
    
    Revisit your hair. Take strands of hair from the appropriate positions on each side and pull them towards the center. They must be even in length. If this is not the case, then your haircut is uneven and you need to correct it.
    
    Structuring
    
    Understand the purpose of structuring. Structuring is the thinning of hair in order to remove excess volume. Structuring scissors, regular scissors and razors can all be used to remove hair.
    
    Trim the ends. It is commonly used for hairstyles middle length and long hair to soften the straight cut, add texture and interest, and take away the volume. It's also good for shaping curly hair.
    - Comb and lift a small section of hair. Hold the hair perpendicular to the scalp between your fingers.
    - Point the scissors inward towards the scalp and cut at a steep angle to make “cuts” and create textured edges.
    - The width and depth of the cuts will determine whether the effect is soft or more jagged.
    - Deep parallel cuts reduce weight, create a “layered” look without actually creating layers.
  3. Learn about the notch. A notch is the same as a cut, the only difference is that it is applied to short, straight hairstyles to create a wild and spiky look.
    
    Try the notch without hands. To use this technique, take scissors and randomly cut off strands of hair to remove density and reduce volume. A cut without hands is made higher in the hair than a cut that focuses on the ends of the hair.
  4. Try sliding. This is a great choice if you want to remove volume from the ends of long hair.
    - Hold the hair perpendicular to the scalp and the scissors slightly open.
    - Slide the scissors down the length of your hair towards the ends.
  5. Try slicing. Slicing adds vitality and texture by reducing the weight of the hair. This technique is performed after the haircut is done and can be applied to both wet and dry hair.
    - Open the scissors (cut without hands) and slide them down the hair, slowly opening and closing the blades.
    - The more often you close and open the scissors, the more hair you cut.
      - Warning: Be careful not to close the blades very often or you will cut off an entire section of hair.
  6. Try the hair-over-comb technique. This technique often used for men's haircuts. This allows you to cut closer to the scalp and create a softer look.
    - Starting at the hairline, lift the strand of hair with the comb.
    - With the bottom blade of the scissors parallel to the comb, cut off the hair that sticks out above it.
    - Move the blades of the scissors constantly. If you stop halfway, then there may be notches.
    - Cut with the base of the blades, not the tips, which can create uneven cuts.
    - After you've cut your first strand, lift up some of your already cut hair with the next strand you're about to cut, so that the first strand is your guide. Don't cut the previous strand's hair, it's just there to guide you. Trim gradually using this technique.