Summer hat crocheted with white yarn. Decorate the hat decorative flower And satin ribbon, threaded through the holes of the pattern.

Size: single

You will need: about 100g yarn white;

Hook No. 2

Patterns

Fantasy pattern: knit by scheme

Abbreviations used:

V. p. - air loop

Conn. Art. – connecting column;

RLS – single crochet;

С1Н – double crochet;

С2Н – double crochet stitch

Description of knitting

Crochet a chain of 8 sts. p. and close it into a ring connection. Art.

1st row: 30 C1H

2nd r.: 3 c. p. lifting 2 in. p., * C1H, 2 v. p. *, repeat from * to * 14 times

Starch the hat by turning the edges, as shown in the photo. Thread into the holes of the pattern satin ribbon and decorate with a decorative flower.

Crocheted bonnet and scarf

Size: 56.
You will need:
250 g of yarn (PAN, “Helena”);
hook number 2.
Technique: crochet.
Basic bouclé pattern: crochet according to pattern 19.1.
Knitting density: 7 repeats x 16 rows = 10 x 10 cm.

Model pattern:




Description of work:

Execution of work: knit the bottom (A) according to the pattern, start from the narrow edge (= chain of 12 chain stitches + 3 chain stitches rise) and knit with the main pattern according to pattern 19.1, gradually expanding to the 20th row to 30 stitches Then knit the part covering the head (B), start from the bottom wide edge (= chain of 111 v. p. + 3 v. p. rise) and knit with the main pattern according to pattern 19.1, gradually reducing the number of loops on both sides, to. For the 20th row, decrease to 93 sts. The length of sides a, b, and a1 should be equal to the length of the perimeter of the bottom without the length of its lower part. Connect related details By front side(at the same time, slightly gather the bottom in the upper part) using a crochet hook with one row of single crochets and 1 row of “crawfish step”. Along the edge of the front part of the cap, knit the fields (C) with the main pattern, evenly increasing the number of loops to 150 (= 50 repeats). For side bevels on both sides, decrease by 1 stitch in each row. At a height of 6 cm from the beginning, finish the work, tie the fields without side bevels in a “crawfish step.”

Bow: knit a rectangle with the main pattern according to pattern 19.1, starting from the short side (= 18 v. p. + 3 v. p. rise), 12 cm long. Pull it in the middle with a thread, tie it in a “crawfish step”. Sew the middle of the bow to the middle of the bottom, and the edges to the part that covers the head.

Scarf.

Size: 26 x 135 cm.

Doing the job: tie a chain of 60 v. p. + 3 v. p. rise and knit with a pattern according to pattern 19.2. When finished, tie around the perimeter: 1st row - s/n columns; 2nd row - *1 tbsp. s/n, skip 2 tbsp. previous row, 2nd century. P.*. Tie fringe along the narrow edges according to pattern 19.3. On the long sides, knit 1 row in a crawfish step.
Source: newsletters -darievna.ru

HERE IS ANOTHER DESCRIPTION OF THIS PANAMACHKA

Panama hat for girls "Chamomile" - Knitting

According to scheme 1, make the core of the flower with thread yellow color. Next, tie 12 petals according to pattern 2 with white thread. Connect all the petals to each other as follows: when the last petal is completed, then, without breaking the thread, take the 1st petal and tie it on three sides. b/n. (one long side, round and one long side). So connect all the petals to each other sequentially one after another. When the entire chamomile is tied along the contour, perform the second row of tying c. b/n. Sew the core in the center of the daisy. Tie chamomile petals around the edge:

1 rub. - 10 v.p. between petals, 2 s. b/n at the top of the petal;
2 r. - 3rd century p. rise, knit a fillet mesh, alternating 2 v.p. and 1 s.n. throughout the entire row;
3 r. - 3 v.p. rise, 2 s. n. under the arc of the previous row, 1 s.n. in the column of the previous row, 2 vp, 1 dc. in the same column of the previous row, 2 d.s. to the next arc of the previous row, 1 s. n. in the column of the previous row, 2 in. etc. and so on until the end of the row;
4 rub. - fillet mesh (like row 2). Tie the crown of the hat with a pattern according to the pattern shown in Fig. 3. The number of rows depends on the desired size of the product. Work approximately 16 rows. For a full hat, tie 11 daisies with 9 petals each.

To make the fields, connect 11 daisies as you make them. Next, proceed to connecting the brim and crown of the hat with a crochet hook or needle and thread. Connect the petals along the edge of the product with neat chains of air loops, as well as single crochets.

You need to connect 11 daisies for the fields while knitting them. To ensure that the daisies fit correctly in a circle, make a template according to the size of the circle and connect the daisies on this template. When all 11 daisies are tied and connected to each other, proceed to connecting the brim and crown of the hat. Choose a method convenient for you and connect the parts with a crochet hook or a needle and thread. Along the edge of the cap, connect the petals together with chains of... p. and s. b/n. (look at the photo).

The model is made with crochet.

You will need: 150 g of Vista yarn - equal parts blue and dark blue, a little light green and green; wire; hook No. 2.5.

Knit sc in circle (diagram 10): 6 rub. - light green color, 1 rub. - blue, 1 rub. - light green, 1 rub. - green,
Zr. - blue.

Then knit without increments: 4 p. - blue, 4 r. - light green, 1 rub. - blue.
Then knit 2 p. drawn loops (Fig. 96).

Tie a wire circle and attach it to the brim. Sew the brim onto the cap along the edge of the openwork strip.

Model by Olga Semikina based on materials from the fashion magazine "HATS" No. 455.

Scheme

The model is crocheted.

You will need: 150 g cotton yarn; hook number 2.

Tie a hat by scheme 69, starting from a ring of 6 VP, and, using hard starch, dry it on a mold.

Model by Vera Kulikovskaya based on materials from the fashion magazine "HATS" No. 455

Scheme

Crochet hat

Materials:
100 g melange yarn"Paglia di Fiesole" Manifattura Mafil di Ro magna no Sesia
Hook No. 5.
Types of loops:
VP - air loop
conn. Art. – connecting post
sc - single crochet
sen - double crochet.
Description of work.
Using hook No. 5, cast on 4 ch and close the connection in a circle. Art. 1st circle. R.: in the resulting ring, perform 8 sc (replace the 1st sc in each row with 1 ch, and the 1st sen with 3 ch, finish this row and the next rows of connecting stitches in the loop of the beginning of the row).
2nd circle. r.: 2 sc in each st.
3rd and 5th circle, p.: *1 Sep, next. p. knit 2 Sep*, rep.
between **.
4th circle. r.: sbn.
6th circle, r.: *2 sc, next. p. knit 2 sc*, rep. between **.
7th circle, r.: *Sep 5, next. p. knit 2 Sep*, rep. between
**
8th circle. r.: sbn.
9th and 11th circle, p.: *8 Sep, next. p. knit 2 Sep*, rep. between **.
10, 12, 14, 18, 20 and 22nd circle, r.: sc. 13th, 15th and 23rd circle, r.: Sep.
16th circle, row: *2 sc, next. p. knit 2 sc*, rep.
Between **. 17th circle, r.: *Sep 3, next. p. knit 2 Sep*, rep. between **.
19th circle, row: *4dc, next. p. knit 2 Sep*, rep. between **.
21st circle, p.: *10 Sep, next. p. knit 2 Sep*, rep. between **.
Cut the thread and finish the job.

White crochet beret (clickable diagram)

Summer hat Yu_Yu

Tips for making crochet hats

Most often, crocheted hats are knitted from the top (from the crown) down in the round.
The circle begins to be knitted from the center, making increases in a certain order. There are several fairly common forms of hats.

Laws of the flat circle

1 law. If the circle is knitted st. b/n, then start at 1 p.m. from 6 tbsp. b/n, divide the circle into 6 wedges and add 6 columns in each row-circle.
2nd law. If the circle is knitted p/st., then start in the 1st r. with 8 stitches, divide the circle into 8 wedges and make 8 increases in each row.
3 law. If the circle is knitted st. s/n, then start on the 1st day. from 12th century s/n, divide the circle into 12 wedges and make 12 increases in each row.

Increases can be made in several ways:
1 way. The increase is always performed on the last column of the wedge. You will get symmetrical wedges with a noticeable line of increases between them.
Method 2. The increase is always performed on the first column of the wedge. The result will be asymmetrical wedges, slightly curved to the right, with a noticeable line of increases between them.
3 way. Increases are made in each wedge so that they are not located on top of each other. The result will be a flat circle with no visible increase lines.

Which method of performing increments to choose depends on your desire and the planned model.
1. Classic round cap.
Using the selected stitches, knit a flat circle with a diameter of 12 cm, making increases in each row. Then the increase is made through the row until the right size hats equal to the circumference of the head (Og). Next, knit without increments to the required height of the hat.
2. The cap is slightly elongated.
The selected stitches are used to knit a circle, but with fewer increases. If knitted st. b/n, then start on the 1st day. from 5 tbsp. b/n and make 5 increases in each row. If knitted st. s/n. then start with 10 tbsp. s/n in 1st r. and make 10 increases in each row. And so they knit until the desired head circumference. Next, knit without increments to the desired height of the hat.
3. Kubanka cap.
Using the selected stitches, knit a flat circle to the desired head circumference. The diameter of the circle is equal to the circumference of the head divided by 3. Next, knit without increases to the desired height.

Increases for hats, practical tips

The hat is one of universal accessories. This headdress can be sewn from fabric or knitted from yarn. The last option is especially suitable for hot summer days or vacation time. Any needlewoman can master crocheting summer hats, they are so easy to make.

How to crochet a hat?

All hats are crocheted using the same principle. First you need to take your measurements and think about the future model. Place a measuring tape around your head. It should pass through the back of the head and the middle of the forehead. The resulting number should be remembered. This will be the size of the finished headdress.

Knitted hats can be completely different - with large, small brims, openwork or a solid pattern. It is also worth paying attention to the type of yarn. Summer hats are often crocheted from cotton and linen threads. They keep their shape perfectly. In addition, they are easy to starch. This treatment makes the edges more rigid. It is best to use threads of medium thickness.

The technique of knitting hats comes down to the fact that first you knit the crown. To do this, close the air loops into a ring, and then begin to make increases. After uniform knitting, you get a bottom that has folded edges. After that they move on to the fields. Make increases and knit the same number of loops to the desired width.

Crochet hat: knitting pattern

You will need:

• Measuring tape
• Threads of medium thickness
• Hook 3 (or any other that matches the yarn)

Manufacturing instructions:

1. Tie 3 air loops and close them around with a half-column. Knit 2 single crochets into each stitch.
2. Start the 2nd row with a lifting air loop. Then, in each column of the previous row, knit 2 loops according to the pattern. Complete the knitting by connecting the beginning and end with a half-stitch. This action should be repeated at the end of each row.
3. In the 3rd row, start repeating: 1 single crochet in the 1st loop, 2 in the 2nd. We start the row with an air loop and end with a connecting post.
4. 4th row: the first 2 loops - along the 1st stitch, and in the 3rd we knit 2 single crochets.
5. Making additions in this way, knit another 10 rows. We got the bottom of the future hat. There are about 68-70 loops at its base.
6. Next we knit the crown. To do this, we perform 1 stitch in each loop. In this way, you need to knit the fabric to a height of 12 cm. We knit 2 stitches into the last loop of the row.
7. Start making additions. Knit 2 stitches into the first loop and skip the next one. Knit the fabric in this way up to 18 cm (total height from the beginning).
8. Next row: 1 loop in the 1st column, 2 in the next. Repeat alternating until the end of the row.
9. Continue knitting the hat by knitting 1 single crochet at a time. Knit in this way until the brim of the hat reaches the desired width. Cut the thread and pull the tail through the loop. Then carefully hide it.

Crochet hat for a girl: job description

You will need:

• Thin yarn like “Iris” - 100 g.
• Hook 2

Manufacturing instructions:

1. Knit 12 air loops and close them into a ring.
2. 1st row: 1 double crochet, 1 chain crochet, 2 double crochets in 1 chain, 1 chain crochet. Repeat this way until the end of the row.
3. 2nd row: 1 double crochet, 1 chain crochet, 1 double crochet, 1 chain crochet, 2 double crochets in 1 chain, 1 chain crochet.
4. 3rd row: 1 double crochet, 1 chain crochet, 1 double crochet, 1 chain crochet, 1 double crochet in 1 chain, 1 chain crochet. Knit the next 3 rows in this manner.
5. 7th row: knit 1 double crochet into each loop, and 1 chain stitch between them.
6. Let's move on to the fields. And we knit 2 double crochets for each loop of the previous row. Between them there is 1 air loop.
7. The next rows are double crochets in each stitch. We knit in this way until the fields reach the desired width. We cut the thread and pull it through the last loop using a hook. We carefully hide the tail on the wrong side.
8. You can decorate the finished hat with a ribbon or crocheted flowers.

Crochet summer hats: how to knit?

This hat model is quite simple to make. At the same time, she looks quite stylish. It can be worn with summer sundress, denim shorts or linen trousers. The headdress is universal and suitable for any style of clothing.

You will need:

• Cotton or linen yarn, 320 m. per 100 g. - 1 skein.
• Hook 2
• Line for fixing fields

Manufacturing instructions:

1. First, we calculate the diameter of the bottom of the future hat. To do this, take a head circumference measurement. Divide the resulting number by 3. Then subtract 2 cm from it. This is done because after washing the product will shrink a little, but then stretch during wear.
2. We begin to knit the bottom. To do this, we close 3 air loops into a ring. Then we knit 6 loops into it.
3. We start adding from the 2nd row. To do this, we knit 2 single crochets into each loop.
4. 3rd row: 2 single crochets in 1 loop, 1 in the 2nd. We alternate knitting in this way until the end of the row.
5. We knit according to the pattern until the diameter of the bottom of the crochet hat is equal to the number that we obtained thanks to the calculation at the very beginning.
6. Let's move on to making the crown of our headdress. To do this, we knit 1 single crochet into each loop. The 1st row is performed quite tightly. Thus, we continue knitting, periodically trying on the workpiece. You need to finish the crown when it reaches the height of your ear. At this point it is necessary to create holes for threading decorative tape. For this the last row We knit the crown with single crochets.
7. Next we move on to the fields.
8. 1st row: in every 10th loop of the previous row we knit 2 single crochets. We perform the next 3 rows without additions, according to the drawing.
9. 5th row: make an increase in the form of 2 single crochets in every 12 loops. We knit the next 3 rows without increases.
10. Row 9: adding 2 stitches to every 14 stitches. The next 3 rows are unchanged.
11. 13th row: adding 2 stitches in every 16th loop to the end of the row. Next we knit 3 stitches without increments. We have formed a slightly flared brim of the hat. Let's move on to strengthening them.
12. Cut a long piece of fishing line. We press it to the last row and carefully tie it with a single crochet. When we come to the end of the row, we should cut the fishing line and connect its edges. To do this, they are melted with a lighter. We cut the thread and carefully hide it inside the headdress. Summer hat crochet ready!
13. Almost all hats in finished form don't keep fit. They can be made tougher in a variety of ways. Starch is usually used sugar syrup. A gelatin solution is no less effective. Take and heat 1 tbsp. water. Pour a 25 g bag of gelatin into the hot liquid. Mix everything thoroughly. Then add 0.5 tsp to the solution. salt and 4 tbsp. l. 9% vinegar. The liquid should be poured into a large bowl. Then they put the knitted hat there and let it get wet. Next, the product is wrung out and the water is allowed to drain.
14. Cover the table with a bag or polyethylene. We put a three-liter jar on it. We put a hat on her. Let's give it shape. Special attention We pay attention to the crown. Let it dry a little. Then we remove the hat and leave it standing on the polyethylene. We wet the fields with a sponge and smooth them thoroughly. They should lie flat on the table. Let the product dry. After this, the headdress is ready to wear.

Crochet hat: photo

In order to crochet a hat, you need to take a head circumference measurement. Knitting starts from the bottom. Usually the air loops are closed into a ring, and then the additions begin. Knit this way until the workpiece reaches the desired size. Then they move on to the crown. It is knitted without any additions. For fields, a certain number of double columns must be made. They will help expand them. Then the fields are knitted without increments until they reach the desired width.

Select the category HAND MADE (312) hand-made for the garden (19) HANDMADE for the home (55) DIY soap (8) DIY crafts (44) Handmade from waste material(30) Handmade from paper and cardboard (57) Handmade from natural materials(24) Beading. Handmade from beads (9) Embroidery (106) Embroidery with satin stitch, ribbons, beads (41) Cross stitch. Schemes (65) Painting objects (12) Handmade for the holidays (207) March 8. Gifts HANDMADE (16) Handmade for EASTER (42) Valentine's Day - handmade (26) New Year's toys and crafts (51) Postcards self made(10) HANDMADE Gifts (47) Festive table setting tables (15) KNITTING (764) Knitting for children (76) Knitting toys (140) Crocheting (246) Crocheted clothes. Patterns and descriptions (44) Crochet. Little things and crafts (61) Knitting blankets, bedspreads and pillows (64) Crochet napkins, tablecloths and rugs (77) Knitting (35) Knitting bags and baskets (51) Knitting. Caps, hats and scarves (10) Magazines with diagrams. Knitting (61) Amigurumi dolls (54) Jewelry and accessories (28) Crochet and knitting flowers (62) Home(481) Children are the flowers of life (63) Interior design (63) Home and family (88) Housekeeping (61) Useful services and websites (114) DIY repairs, construction (23) Garden and dacha (23) Shopping. Online stores (46) Beauty and Health (214) Fashion and style (92) Beauty recipes (56) Your own doctor (65) KITCHEN (94) Delicious recipes(26) Confectionery art from marzipan and sugar mastic(26) Cooking. Sweet and beautiful cuisine (42) MASTER CLASSES (233) Handmade from felt and felt (24) Accessories, DIY decorations (38) Decorating objects (14) DECOUPAGE (15) DIY toys and dolls (22) Modeling (37) Weaving from newspapers and magazines (50) Flowers and crafts from nylon (14) Flowers from fabric (19) SEWING (162) Toys from socks and gloves (20) TOYS, DOLLS (46) Patchwork, patchwork(16) Sewing for children (18) Sewing for comfort in the home (22) Sewing clothes (13) Sewing bags, cosmetic bags, wallets (27)

Good afternoon friends! I suddenly wanted to crochet a summer hat for myself: I saw interesting scheme openwork women's hat and immediately set to work, using white peony threads that I found at home.

I really liked the result, as well as the knitting of the hat itself. So I bought more red threads and knitted a second one under my red dress.

I show you my work, as well as a knitting pattern and description. And instead step by step photos This time I have a video, in some places it is not very high quality and not so detailed that you can see the knitting of each loop. It turned out to be not easy to shoot, there were some nuances, after all, the product is not small, and I didn’t really want to unravel it. I hope that all together will help you understand how to read the diagram.

Crocheted summer hats: materials, sizes

In the description for knitting such a summer hat in the magazine, it was recommended to use “iris” yarn and a 0.9 hook. In general, of course, knitted summer hats, especially openwork ones, are better knitted from thin cotton threads.

Iris, narcissus, violet, lily and others are suitable.

The peony threads used to knit my white hat are slightly thicker than iris and I took the hook number 1.25. In order for the hat to fit me, I had to fiddle a little and skip knitting three rows at the beginning of the crown, as well as the last rows of the brim, which are indicated in the diagram.

I already crocheted the red hat with daffodil threads 0.9 strictly according to the pattern, it turned out to be a little deeper and the brim wider than the white one, just a centimeter.

With this knitting density, the hat fits head size 56-57.

Yarn consumption is exactly one skein of 50 grams.

How to crochet a summer hat to fit your head

In order for the hat to fit well and fit the size of your head, you need to decide on the diameter of the bottom from which knitting begins.

This diameter is calculated by the formula: divide the head circumference by 3.14 and minus 1.

Thus it turns out:

• size 55: bottom diameter - 16.5 cm
• size 56:17
• size 57:17
• size 58: 17.5
• size 59:18
• size 60: 18.

After the circle of the required size is knitted, knit the crown without expanding the circle. It is better to determine the height of the crown by fitting.

And then they move on to knitting the fields.

Regarding our pattern specifically: for head size 55, if you crochet 0.9, try skipping rows 12-14, after knitting the flower on the crown, immediately proceed to knitting the 15th row.

For head sizes larger than 57, in rows 15-17, increase the number of chain stitches.

In general, here you need to try and try it on; it’s better to tie the bottom correctly right away than to unravel the whole hat later.

You can, of course, experiment with the hook number; you will also get a different size.

Women's summer crochet hat: diagram

Description of crocheting an openwork summer hat

Donyshko

We dial 4VP and close it in a ring or make a sliding loop

Row 1: 12 C1H (instead of the 1st - 3 VP and the same in all other rows, I won’t write about this every time).

Row 2: 2C1H in each column of the previous row, 2VP between them.

Rows 3 – 7. I will call each element of the pattern consisting of double crochets a “petal”. In total we have 12 petals in the circle.

At the beginning of each petal in rows 3-7 we knit two double crochets under the first stitch and one under the remaining stitches. Between them – 2VP.

In the 7th row, each petal should have 7 columns.

Row 8: from this row we reduce the number of columns in the petals. We stretch the connecting thread to the second loop of the petal and knit 5С1Н (instead of the 1st - 3VP).

Between the petals under the arch from VP: 3VP, 1S1N, 3VP.

Row 9: 3C1H in each petal. In each arch of the previous row we knit C1H, between them - 3VP.

Row 10: 1C1H is already left in the petals, we also knit into the arches - 3VP, 1C1H, 3VP.

Transition from the round part of the bottom to the crown

Row 11: in the 10th row we have a mesh, in every second cell of it we now need to knit 2C1H, 1VP, 2C1H - a fan. Between the fans - 3VP.

Row 12: similar to row 11 - we knit the same fan into each fan (insert the hook under the chain loop in the center between the posts). And we will knit such a path of fans in each next row (up to the 23rd row inclusive). Between the fans in the 12th row - 4 VP.

Row 13: between the fans 3VP, 1 single crochet, 3VP.

Row 14: same as row 13.

Tulya

Row 15: between the fans 3VP.

Rows 16-17: between the fans – 2VP, 1SC, 2VP.

Rows 18-23: repeat rows 15-17.

Fields

Row 24: in two of our fans - the same elements, and in every third we knit 7C1H. Between all groups of columns there are 5VP.

Row 25: two rows of fans in the same way, and in the big one we knit like this: 1СБ in the first loop of the element, 5VP, 1С1Н in the 4th loop, 1VP, 1С1Н in the same 4th loop, 5VP, 1СБН in the 7th loop. There are 5 VP between the fans.

Row 26: in small fans here we will knit 7C1H in the center, now we will get berries. In a large element: 1СБН, 4ВП, 7С1Н in the center of the previous row (in a chain loop), 4ВП, 1СБН. There are 4 VPs between all groups of fans.

Row 27: in all berries we knit 5 single crochets, 7 chain stitches between them.

Row 28: in berries we knit 3 sc. Between them in an arch: 5ВП, 1С1Н, 1ВП, 1С1Н, 5ВП - this is the beginning of new berries.

Row 29: in the “old berries” - 1СБН, in the new ones - 7С1Н. There are 5VP between all the berries.

Row 30: 5 sc in each berry, 9 VP between them.

Row 31: in the berries 3СБН, through 6VP into the arch - a new berry (1С1Н, 1ВП, 1С1Н).

Row 32: 1СБН each in old berries, 7С1Н in new ones, 6VP between them.

Row 33: 5 sc in each berry and 11 ch between them.

Row 34: like 31, between the elements of 7VP.

Row 35: like 32 and 7 VP between the berries.

How to add stiffness and shape to a crochet summer hat

I starched the hats, or rather, “gelatinized” them in the following solution: 2 tablespoons of gelatin per 700 ml of water.

First, I soaked the gelatin in cold water, when it swelled, I heated it until all the grains dissolved. Cooled a little, strained through a strainer.

I soaked the hat in this solution, wrung it out well and pulled it onto a mold, for which I used a ready-made synthetic hat. If you don't have one, you can use a suitable plastic bucket. Glass jars will not fit, since we need the margins to lie flat on the table and not hang haphazardly.

After drying, the hat holds its shape perfectly.

Schemes and descriptions of how to crochet a summer hat for a woman, photos of products.

Schemes and descriptions of how to crochet a summer hat for a woman, photos of products.

The appearance of the hat, like many other accessories, was dictated not by fashion, but by practicality and necessity. In hot, sunny countries, it saved from scorching heat and bright rays, thanks to its wide brim, and for residents of the north it served as protection from the cold. During the Middle Ages, the hat acquired a decorative purpose. Many styles and forms of this headdress appear. Hats are decorated with fur, ribbons, feathers and precious stones. Over time, the height of the crown, the width and direction of the fields change, flowers appear and disappear as decoration and decorative elements. In the 80s of the last century, hairstyles with a lot of backcomb came into fashion for women; it was difficult to put a headdress on such structures, and the popularity of hats waned, only to gain momentum again by the end of the 90s. Hats are made from straw, felt and many other materials. Hats stand on a separate line, crocheted. Hats are knitted from pure wool and blended threads for cool autumn and winter. They are characterized by dense and relief patterns and narrow margins. Hats can also be openwork, decorated with ribbons, rhinestones, beads or flowers, knitted with light cotton threads and perfect for hot summers. Exactly about summer models will be discussed in this article. Feature Crochet hats is that they are crocheted from the center of the bottom down. Crochet summer hats have another undoubted advantage - yarn consumption. For creating openwork product You will need approximately 100 - 200 g of cotton thread. Each needlewoman will have a few threads left from her swimsuit or summer sundress, which can be used to create a hat to match her existing outfit. Romantic openwork hat decorated with ribbons and flowers.
Required cotton yarn(100% cotton) peach color 200 g, hook number 2. Close a chain of 10 air into a ring. loops

First row. Knit into a ring * 4 tbsp. with double crochet, 2 air. loops* from * to * 5 times. In the first case, replace 1 tbsp. with a double crochet for 3 air. lifting loops, finish row with 1 connecting post.

Second row. Knit 1 tbsp into each stitch. double crochet Start and end the row like the previous one.

Third row. Knit through 1 loop of the previous row (1 double crochet stitch + 2 chain stitches). Start and finish similarly to the previous two rows.

Fourth, sixth and eighth rows. Knit like the second one.

Fifth row. Knit through 1 loop of the previous row (4 double crochet stitches + 2 chain stitches). In the first case, instead of 1 tbsp. with a double crochet, knit 3 air. lifting loops. Finish with a connecting post.

Seventh row. knit similarly to the fifth, but instead of 2 air. loops between the four sts. Double crochet 3.

Ninth row. 4 air lifting loops, 3 tbsp. with 2 yarn overs with one top, *arch of 6 air. sts over 1 st row below, 4 sts. with 2 yarn overs with one top *, knit from * to *, knit the last arch as 2 air. loops + 1 tbsp. with 2 yarn overs.

Tenth row. Knit 8 stitches into each arch. without a crochet. Replace the first st. without double crochet for 1 air. lifting loop, finish row with 1 connecting post.

Eleventh row. Knit in the fourth and fifth stitches. single crochet for each arch 2 tbsp. with 2 double crochets + 3 air. loops. The last arch of 3 air. replace the loops with 1 air. loop + 1 half double crochet.

Knit further according to the pattern, finish the hat by knitting 31 rows with a picot.

Thread the ribbon into the last row of the fillet mesh. Decorate with flowers if desired. The brim of the hat can be hard starched or soaked in PVA glue diluted 1:1 with water. Summer cloche hat. The elegant hat fits snugly to the head. The photo shows a white product made from cotton threads, and the imagination of the needlewoman will definitely tell you the shade of yarn that suits her.

First row. In a ring of 4 air. knit 10 stitches. without a crochet. (can be replaced with an amigurumi ring).

Second row. Knit 2 tbsp into each loop. double crochet with one base + 1 air. loop), replacing in the first case 1 tbsp. with a double crochet for 3 air. lifting loops, finish row 1 air. loop and 1 connecting post.

Third row. In every art. Crochet 2 tbsp with a double crochet. double crochet In the first case, replace 1 tbsp. with a double crochet for 3 air. lifting loops. Finish the row with a connecting column.

Fourth row. knit 4 tbsp. with a double crochet with one top, alternating them with arches of 5 air. loops start row 3 air. lifting loops instead of 1 tbsp. double crochet, finish with 1 connecting stitch.

Fifth row. Knit similarly to the fourth, but knit arches from 3 air. loops knit the last arch in the form of 1 air. loop + 1 half double crochet.

Sixth row. Start with 3 air. lifting loops, 1 tbsp. with a double crochet in the same arch, knit 4 tbsp in each next arch. double crochet, 2 tbsp. double crochet, knit into the first arch of the row, finish with a connecting stitch in the third lifting loop.

The seventh row is knitted similarly to the fourth.

Knit further according to the pattern.

Summer hat with wide brim.
In order for the brim of this hat to natural cotton keep their shape, you can use a piece of wire. Connect a chain of 8 chains into a ring. loops Replace the first stitches in each row required quantity air lifting loops. And end the rows with a connecting column, unless another end of the row is indicated.

First row. 24 Art. double crochet

Second row. Knit 3 tbsp in every third stitch of the row. double crochet with one base, knit 3 air stitches between three stitches. loops.

Third row. In triplets of columns of the row below, knit (2 double crochets with one base + 1 double crochet + 2 double crochets with one base (it turns out 5 loops)), above the air. With the loops of the bottom row, knit 3 air. loops.

Fourth row. In every five st. knit double crochet (2 double crochet stitches with one base + 3 double crochet stitches + 2 double crochet stitches with one base), over air. In the loops of the row below, knit 3 air. loops.

Fifth row. Knit similarly to the previous two, in art. Double crochet for the bottom row (2 double crochet stitches with one base + 5 double crochet stitches + 2 double crochet stitches with one base), over air. knit 3 air loops. loops.

Sixth row. knit with arches of 5 air. loops, securing them st. Single crochet in every third stitch of the row below. Knit the last arch as 2 air. loops + 1 tbsp. with 2 yarn overs.

Seventh row. 3 air lifting loops, 2 tbsp. double crochet with the same arch, *2 air. loops, 1 tbsp. without crochet in the next arch, 2 air. loops, 3 tbsp. double crochet the next arch*, knit from * to *.

Knit further according to the pattern.

Insert a thin wire into the last row of the brim of the hat, tie one row of st. without a crochet. Starch the finished product. The following hat with a rakish brim is suitable for both the beach and a walk summer evening, turning out to be the highlight of the whole outfit. This hat is knitted in a spiral and does not require knitting air loops. The beginning of each row can be marked with a contrasting thread for easy counting of stitches. Connect a chain of air into a ring. loops

First row. Knit 16 tbsp. double crochet

Second row. In every art. Double crochet, knit 2 tbsp. double crochet

Third row. Above every second st. double crochet, knit 2 tbsp. double crochet

Fourth row. Knit 2 tbsp. double crochet over every third st. double crochet row below.

Knit according to the pattern.

Continue knitting until the bottom reaches the required diameter, then knit without increments to the required depth. Knit the fields in the same way as the bottom. If desired, you can alternate rows with and without increases. In this case, the brim will fit a little closer to the head. Like any product, it is better to try on a hat several times during the knitting process to achieve the best result.

Comments

Related posts:

How to crochet summer women's tops, diagrams and description of work, photos finished products How to knit a summer one women's blouse crochet, diagrams, patterns, job description