New Year very soon. Of course, we all want to decorate our home beautifully. It’s especially great when the decorations are made by yourself. Today we propose to do enough a simple snowflake in modular technology, which is also called . When creating this decoration, you should be patient. You have to make 102 triangular modules, which will become the basis of our kusudama snowflake.

How to make a triangular origami module

You can choose the sheet size when making the module. For convenience, especially if you are a beginner kusudama master, take a regular landscape sheet. It must be divided into 16 parts. You should get blanks 7 by 5 cm.

We fold each rectangle lengthwise into two equal parts, marking the middle of each. The next step is to bend the corners on both sides. As shown in the first 3 pictures of the photo.

Now turn your workpiece over and bend the protruding ends of the triangle. Next, you should straighten the seat and bend two small corners on it. This is shown in the central photograph. The next step is to re-bend the protruding part of the pillar to form a triangle. Fold the resulting large triangle in half. We got modules for further crafts.

First, you need to assemble the first “ray” of our snowflake from the prepared modules. To create it we will need 6 sections of one and 5 of two modular triangle in everyone.

First, take our module and bend it in half. One more module is inserted into two of its pockets. In each next one there is also one short corner. We get a blank like the one in the photo below.

Important! To make the snowflake even, count the number of rows. It should be the same in each of its rays.

In total you should have 6 rays as in the photo below. They will become the basis of the snowflake. You can use paper of any thickness and color, including velvet-coated paper and cardboard.

The next step we will combine our rays into one snowflake using the technique modular origami.

Look carefully at the photo! It clearly shows how the rays are attached to each other.

To begin, take two beams and attach them to each other. For better fixation, you can use glue.

Take your time and carefully collect all the rays into one original snowflake. Yours modular craft origami is ready.

Now, for convenience, you can bind to it beautiful ribbon or cover with paint. Such a beauty to decorate any Christmas tree or window. And from several of these snowflakes you can make a whole garland.

We continue our acquaintance with creativity using the modular origami technique and today we will create New Year’s snowflakes. Detailed Descriptions works and step-by-step photos to help you.

Snowflakes using the modular origami technique turn out to be the most beautiful shapes.

Modular origami: Snowflake “Blue Crystal”

The snowflake is made from white and blue office paper and decorated with glitter. The snowflake is quite durable and there is no need to glue the modules together.

You will need:

• office paper blanks: blue = 42 pieces; white = 72 pieces.
• silver or blue glitter
• PVA glue

Preparing modules

• Place the modules into piles: 6 blue and 6 white modules for the base and 10 white and 5 blue for the rays.
• Set the remaining 6 white pieces aside. They will be needed when decorating the snowflake.

Assembling snowflake parts

1. The base of a snowflake. Make an initial row of 12 modules, as for Christmas tree branches ( . Take 6 blue and 6 white modules and hang them.
2. Snowflake rays.

Collect a snowflake beam.

As shown in the photo (1 - 10).

Snowflake design

Hang rays on the base of the snowflake

As shown in the photo (11 - 14).

Hang 6 white modules, additionally fastening the rays of the snowflake.

Attach glitters to individual modules. The “Blue Crystal” snowflake made from modules is ready.

This snowflake is equally attractive from both sides. You can apply glitter on both the top and bottom sides.

Snowflake “Frosty pattern” from modules

The combination of white and blue modules creates a beautiful “ice pattern”. It is better to glue the rays of such a snowflake to the base, especially if you want to use the craft as a Christmas tree decoration.

You will need:

• office paper blanks: blue = 84 pieces; white = 66 pieces.
• silver or blue glitter
• PVA glue

Preparing modules

• Fold all the blanks into triangular modules.
• Arrange the modules into piles: 6 pieces of each color for the base of the snowflake and 13 pieces of blue and 10 pieces of white for each ray.

Assembling snowflake parts

1. The base of a snowflake. Complete the initial row of 12 modules, as for the Blue Crystal snowflake.
2. Snowflake rays.

Collect a snowflake beam.

As shown in photo (1 - 8).

3. Also collect the remaining 5 rays.

Snowflake design

Hang the rays on the base of the snowflake, as shown in photo 9.

Decorate the snowflake using glitter and PVA glue.

If you want to glue the beams to the base, coat the sharp tips of two adjacent base modules with PVA glue and hang the first beam module on them. Then glue the remaining rays in the same way.

Snowflake " Frosty pattern" made of modules is ready.

How to make a snowflake “Magic Bird”

The rays of this blue-white snowflake resemble the feathers of a fairytale bird. The snowflake is made without a base, so to give additional strength to the craft, it is better to glue it together when decorating.

You will need:

• office paper blanks: blue = 36 pieces; white = 66 pieces.
• silver or blue glitter
• PVA glue

Preparing modules

• Fold all the blanks into triangular modules.
• Set aside 6 white modules in a separate pile - they will be needed when decorating the snowflake.
• Divide the remaining modules into 6 piles.

Assembling snowflake parts

Collect the rays of a snowflake.

As shown in photo (1 - 8).

2. Also collect the remaining 5 rays.

Before hanging the white module, apply PVA glue to the sharp tips of the blue modules to secure the connection.

Snowflake design

• Place two adjacent beams together and hang a connecting white module on the sharp tips of the first blue modules.
• Connect the remaining rays of the snowflake in the same way.
• Decorate the snowflake using glitter.

Snowflake “Magic Bird” is ready.

Modular paper snowflake (video)

In this article you were shown master classes on collecting different beautiful snowflakes. Decorate for the holiday and surprise your guests.

Scheme for creating modular origami snowflakes from paper for beginners. Detailed master class with photo

Scheme for creating modular origami snowflakes from paper for beginners. Detailed master class with photos

The snowflake is very fragile and melts before it touches your palm. But thanks to origami, you can admire snowflakes for a long time, if you want, all year round. Paper snowflakes created with your own hands will be real New Year's decoration, will decorate your home and add a touch of magic. They will be exquisite Christmas tree decorations. They can also be presented as New Year's souvenir to family and friends. How to make a snowflake? This is probably one of the lightest figures assembled using the modular origami technique. Paper snowflake made from triangular modules: light blue – 78, dark blue – 42, white – 150. The size of the modules is 1/32 of an A4 sheet. The first two rows of 6 modules white in each row, we connect into a ring.
In the third row we double the number of modules, 12 modules in a row.
The fourth row contains 12 light blue modules.
Fifth row – we double the number of modules, 24 dark blue modules in a row.
Sixth row - alternate modules by color - 3 light blue - 1 white and so on until the end of the row. We put the white modules on with the short side outward - 24 modules in total.
Now we collect only light blue modules, 6 fragments - see photo below.
On each white module we put on 2 more modules, also with the short side out.
Let's start assembling the arches from white modules. Each arch contains 17 modules. We insert the modules in one pocket into each other. In total we collect 6 arches.
We collect rays for a snowflake: for each ray 5 light blue modules we put 3 dark blue modules on them with the short side outward. Insert each ray between the arches and the paper snowflake is ready!
Like these ones volumetric snowflakes You can quickly do it yourself. If you use all your imagination, then even based on this one diagram you can come up with many different snowflakes

Comments

Related posts:

Scheme for creating a modular origami swan from paper for beginners. Detailed master class with photos This detailed origami master class for 8-year-old children will teach you how to make an origami mushroom out of paper. This detailed master class on modular origami with step by step photos contains a diagram for assembling a birch tree from paper.

There is nothing more exciting in winter than watching the snow fall. Each snowflake is so unique and extraordinary, no two are alike in the world. She has always been a symbol of winter and, of course, New Year's holidays. At matinees in kindergartens, every girl wanted to be a snowflake! Origami paper snowflakes have brought great variety to our world. You can not just cut out a flat and banal snowflake and stick it on a window or wall - the origami technique allows you to create various volumetric figures. They can decorate the Christmas tree and rooms. You can start fun game with children, organizing a competition for the best craft. If you have mastered modular origami, snowflake receives many images. If you have a supply of ready-made modules, then using them you can try different schemes.

Real snowflakes live so short and melt easily when picked up. But with the help origami, snowflakes can live for a really long time. Creating them with your children will bring great joy and pleasure! This kind of work develops their imagination and finger motor skills. In addition, children do not have to make figures according to the diagram - show the basic principles of connecting modules and let them create miracles with their own hands. The main thing is to remember that any snowflake has 6 rays, following this simple rule, you can always get a good result.

Our snowflake is very simple and easy to assemble, especially if this is your first experience creating modular origami. All you need is to spend a little time to create required quantity modules.

Modular origami snowflake, diagram of its assembly

To obtain finished snowflake, you need to make 90 modules. If you have ready-made square sheets of paper (these are often found in offices for notes), use them, or make them yourself. From a standard A4 sheet, lined into equal squares, 16 blanks come out. To assemble the modules, use half of the squares. Thus, one sheet allows you to make 32 modules.

Let's take a closer look at the module assembly.

Step 1

If you have prepared 32 modules, then your workpiece is half a square and you just need to fold it in half. If you have a square, fold it in half horizontally. Then fold it vertically and bend it back. Fold the edges diagonally towards the center of the vertical line - together they form a triangle.

Step 2

We turn the workpiece over and bend the corners from below to the horizontal line in the center. Thus, we will get a rhombus. Next, fold these corners up and we get a triangle. To finish, simply fold the triangle in half vertically, so that you get pockets on the outside and the triangles are on the inside. Our preparation is ready. This is an assembly of universal modules from which all kinds of modular origami figures are put together.

Step 3

Take 12 modules and arrange them in a circle, with the short side of the triangle down and the pockets in the middle. They form the first row of our snowflake. Let's take another 12 modules and use them to connect the first row, in the way that can be seen in photo 9.

In the same way, using 12 modules we will make the third row. This is the basis for the snowflake.

Step 4

Let's make the first ray, put two modules on one of the modules of the third row at once and connect them with one, the beginning of the ray is indicated beige color on the picture. We assemble according to the 2-1-2-1 scheme only 4 times. The finished ray in white will look like in photo 13. In total we need to make 6 rays. If we count from the first one that we collected, then we begin to make the next one in the 3rd module, then the 5th, 7th, 9th and 11th modules.

And now our snowflake is ready!

It is very delicate and airy and will decorate any interior. You can easily make snowflakes colored, or make only the rays multi-colored. It all depends only on your imagination and desire. We hope that our master class was useful and understandable.

You will definitely turn out beautiful origami snowflake, scheme to its implementation and step by step instructions, will only give good mood and a ton of Christmas decorations!

Paper snowflakes with your own hands will become a real New Year's decoration, transform your home, and add a touch of magic. How to make a snowflake? This is probably one of the lightest figures assembled using the modular origami technique. Paper snowflake made from : light blue - 78, dark blue - 42, white - 150. The size of the modules is 1/32 of an A4 sheet.

The first 2 rows of 6 white modules in each row are connected into a ring.

In the 3rd row we double the number of modules, 12 modules in a row.

4th row - consists of 12 light blue modules.

5th row - double the number of modules, 24 dark blue modules in a row.

6th row - alternate modules by color - 3 light blue - 1 white and so on until the end of the row. Put on white modules KSN (short side out) - 24 modules in total.

Now collect only light blue modules, 6 fragments - see photo below.

On each white module, put on 2 more modules, also KSN.

Let's start assembling the arches from white modules. Each arch consists of 17 modules. Insert the modules into each other in one pocket. Collect 6 arches in total.

Let's collect the rays for the snowflake: for each ray 5 light blue modules, put 3 dark blue modules on them. Insert each ray between the arches and the paper snowflake is ready!