The easiest ways to cut hair easily. How to cut your own hair at home

Every girl sooner or later asks the question: how can you cut your hair, for example, to your shoulders, without resorting to the help of specialists and without going to salons, but do it at home, on your own?

It turns out that this is quite simple, because there are many different ways for this for different lengths and types of hair.

Advantages and disadvantages of self-cutting at home

At the same time, do not forget about the shortcomings, but there are few of them:

What tools do you need for self-cutting

To create your own unique image, you need to have only a few tools.

Before you start cutting, make sure you have:

Sharp scissors. Good scissors for cutting hair cost a lot, but to cut your own hair at home, it is not necessary to buy a professional tool;
Thin comb. Such a comb has cloves tightly adjacent to each other, located in one row. Such a comb will carefully comb the strands of hair, preventing unruly hairs from slipping away and ruining the haircut;
Mirror, better two. Like scissors, the most obvious and most needed detail. Mirrors will point out any, even minor, flaws that can be corrected immediately;
Spray. You can use any other device that can spray water and wet your hair;
Clamps. They are needed in order to separate the strands and remove the extra ones so as not to interfere with the process;
Table and chair. You need to equip the place as comfortably as possible so that at the same time there is a good view of the hair.

You can get by with a cheaper analogue of scissors, as long as they are always well sharpened.

Workplace organization

To speed up the cutting process, each tool must have its place.

There should be a large mirror on the table that provides a good view of the head and hair.

And if there are 2 mirrors, it is better to take both, placing them in front of you at some distance from each other, so that you can see the left and right parts of the head and even the back of the head.

Place a low chair or ottoman in front of the mirror. The chair should be of such a height that the head is fully visible in the mirror.

There should be a smaller mirror on the table, which can be placed on a chair or bedside table opposite, or, holding it in your hands, examine your head.

Comb and scissors should be right at hand,not to follow them.

Clamps should also be located in close proximity to the hands or be hooked somewhere very close so that they can be reached even from an uncomfortable position.

The sprayer will be needed before the haircut and, perhaps, sometimes in the process, as the strands dry. Therefore, it can be placed further away than other devices, but at the same time, so that it can be easily used at any time.

The place must be well lit so that you can see the hair from all sides. It is unacceptable to cut your hair in the twilight or illuminating only one side of the head, otherwise there is a big risk that the haircut will be uneven.

Hair preparation and haircut selection

The very first thing to do before a haircut is to wash your hair well. Clean, damp hair will best reflect the process and final result of the haircut.

Before proceeding with the haircut, you need to choose exactly the option that will suit the type of girl's face. For example, any hairstyle will suit an oval-shaped face.

An elongated face with a high forehead looks good with bangs.

Good to know! Professional stylists recommend wearing bangs and braiding a braid for an elongated face, this significantly “shortens” the forehead visually.

Light curls and thin bangs are suitable for a square face, this will make the lines of the face smooth. Straight and even bangs, on the contrary, will make the face rougher.

This option, how to cut your own hair on your shoulders, suits almost all types of faces. The exception is the pear-shaped type, with which such haircuts should be carefully selected.

For a voluminous and voluminous hairstyle, girls with a round face should do a multi-layered hairstyle on top. To lengthen the face and reduce the line of the chin, thinned strands just below the cheekbones will help.

For girls with a heart-shaped face, experts recommend choosing hairstyles that are not too thick on the forehead and lush below the chin.

How to trim your own shoulder hair at home. Step-by-step instruction

The easiest way to cut your own hair for a beginner is to cut the ends.

For beginners, below is a detailed description of how to do it smoothly:

Be careful! Curly hair should always be cut below the planned length, while thick or coarse hair should be cut in small strands so that the end result is even and neat.

It takes practice to figure out how to cut your own shoulder length hair with curly hair.

But so that the hair does not turn into a kind of square, you need to retreat several centimeters at once below a given length.

Trimming the ends of long hair

Trimming the ends of the hair is very important for their health, especially for long ones. So the hair will not split.

What can cause split hair:

There are several tips cutting techniques, and which one to choose depends on how long the hair is and how cut it is:

Elimination of split ends of hair

It is impossible to eliminate an already existing section without cutting it, but it is possible to prevent its occurrence.

Split ends are called trichoptilosis, and there are three types of it:

general stratification of hair;
when the bundle is repeated several times on one hair;
hole in the middle of the hair.

These problems apply not only to long hair, but also to shoulder-length hair, and, of course, they must be cut, and you can even do it yourself.

To prevent splitting, always use scissors for cutting. Stationery is not intended for cutting, they only injure the hair, turning the tips into a fringe, which only contributes to the section.

Regular clipping of the tips can help eliminate the problem of section. It is enough just to cut off 0.5-2.5 cm every 6-9 weeks.

The main rule is to completely cut off the section, even a little more, so that it does not appear again.

Products that promise to cure split ends don't fix the problem, they just glue the splits together, but these products can help if used before the problem occurs.

How to cut hair with a ladder

The instruction is as follows:

Important to remember! Elastic bands should be used only tight, so that the hair does not come out, but stays even, this applies to both long and shoulder-length hair, so that it is convenient to cut your own hair.

This haircut will look best if you choose the option of cutting your hair to your shoulders. It will look more advantageous and most noticeable on shoulder-length hair.

How to cut your own hair to shoulder length

In order to cut your hair on your shoulders as best as possible, you should wash and comb your hair well.

And you need to cut it like this:

Starting at the crown, take a strand about 1 cm thick, count from about 5 to 8 cm and cut off the rest. This is the control strand.
Now, in turn, comb the rest from the top of the head to it and cut off the intended length.
Further, the side strands are also trimmed along the length of the crown.
After the temporal zone and parietal in the same way is compared with ready-made strands.

The result is a beautiful voluminous hairstyle.

How to cut your own short hair

With a short haircut, the instruction has some differences:

"Cascade": do your own haircut

Follow instructions:

To cut your own "Cascade", going to the tail on the forehead.
You should roughly imagine the length of the hairstyle, and then cut off the excess in the tail. We check a few more times to see if the excess is knocked out of the cut strand.
After everything has become perfectly even, it just remains to remove the elastic and comb your hair - and the Cascade is ready.

Such a hairstyle as “Cascade” looks very beautiful and feminine on shoulder-length hair. Hair cut by yourself looks very beautiful.

How to cut your own hair under a square

To make yourself a square, you need to follow the instructions:

How to make yourself "Bob"

You must proceed as follows:

Cut your own hair short

This guide will show you how to cut your hair short:

How beautiful to cut bangs

Bangs are the main part of the hairstyle that loses its shape first, and it needs to be cut more often.

And in order not to run so often to the hairdresser, you can safely do it yourself.

Experts give several examples of different types of bangs that you can do with your own hands.

Long straight bangs

How to do:

Air bangs

For this type of bangs, you will definitely need thinning scissors.

You need to cut like this:

Long oblique bangs

If it is cut off for the first time, then experts recommend not to wet the hair in order to see the result immediately.

How to cut bangs of this type:

How to use a hair clipper and how it can be useful

To learn how to use a hair clipper like a professional, you need to follow just a few tips:

Hair clippers are affordable, with a wide variety of models.

A large number of modes allows you to trim the mustache, beard and sideburns in men, and also help to make a variety of haircut options for both men and women.

The machine can not only make a men's haircut from scratch, but also help in creating a women's hairstyle.

There are only 2 types of hairdressing tools: basic and auxiliary. The main ones include scissors (not only ordinary, but also thinning) and combs. All other tools are auxiliary.

Each hairdresser has his own personal secrets.

But there are basic tips that all professionals give when choosing tools:

You can be a stylist for yourself and change haircuts no worse than in a salon, at home, with your own hands. One has only to practice a few times, learn the rules and nuances of hair cutting, and the result will surely please you more than once!

From this video you will learn how you can cut your hair to your shoulders or to a different length:

In this video you will see how you can cut your own hair at home:

After the decision was made to cut hair only at home, all the necessary equipment was purchased, and even the first victim was found for an experimental haircut, a natural question arises - how to cut with a machine so that the hairdresser's homegrownness is not conspicuous? Or how to cut your own hair without getting fresh scars?

Any simple or model men's haircut begins with the purchase of a typewriter. It seems like a common truth, but in fact, it is easy to get lost in the world of shearing mechanisms - there are so many models in each row. The division of all devices into three main types according to the principle of operation will help to understand the assortment.

Vibrating machines

This type of device is one of the most economical and noisy. In addition to sound accompaniment, the payment for a small cost will be a small power - up to 15 watts and a short duration of continuous operation - up to 20 minutes. At the same time, the clipper will independently tell you when it gets tired, simply by turning off. For these reasons, experts will not cut hair with a machine of this rank, and by the end of the day the hand would be tired from the strong vibration that distinguishes such a device.

There is another reason why clipper cutting at home with an economical device can be disappointing - these are non-removable knives that are difficult to care for. Among the more expensive models in this series, there are semi-professional successful options, such as the Oster 616, which solved this problem easily and elegantly.

Rotary hair clippers

Cutting with a rotary type clipper is more pleasant due to the reduced vibration background, and a strong engine ensures uninterrupted operation of the device for more than one hour. The device is convenient for both specialists and beginners, it almost does not vibrate in the hand, but it is much more capacious than the vibrating one by weight.

Complete with the model and separately, there is a large number of nozzles with which any men's hairstyles are formed. Hair density and stiffness do not matter - any men's haircuts with a machine of this type are equally good.

Cordless clippers

One of the lightest and fastest devices and, of course, costs accordingly. In addition, the power of such models is carried out both through the battery and through the network - a great advantage for painstaking men's haircuts with a machine, especially for a beginner. The knives in the device change at the speed necessary for professionals, and the weight of the device - within 150 grams - makes it a toy compared to previous categories. You can cut your hair with this battery mechanism both to yourself and to any other person.

What you need to know before starting a haircut

It is better to start a career in men's haircuts with a typewriter at home with the formation of the most elementary models -. The schemes of both models are characteristic of a sporty style, that is, they imply a shortened nape and temples and an elongated crown. How to cut correctly can only be understood by capturing the essence of what should be the result, and this requires not a single haircut under the typewriter.

When cutting a man's hair with a machine in the absence of experience, there is no need to rush and strive to start the device, as soon as the "client" took the chair. Perhaps before that, your counterpart had a model haircut and to redo this beauty, you will first have to use scissors. Below is a fairly complete step-by-step instruction, for those who do not agree to be able to.

Men's haircut step by step

The simplest men's haircuts for a typewriter begin with the removal of excess length and only then - from work, directly, with the device. A step-by-step instruction on how to cut a man's hair is as follows:

Using a razor after the clipper is finished is the finishing touch of the process, but this trimming step is only required if the hairline at the back of the head dangles too low on the neck and is not aesthetically pleasing. Take a simple disposable machine and baldly remove the ugly and stiff bristles below the haircut line.

How to cut your own hair with a machine

How to cut your own hair if there is no way to turn to outside help, but the machine and the desire to learn how to do without a hairdresser are available? If you have not yet decided on a hairstyle, remember that the box half-box that goes to most males is a male haircut with a machine, which is contraindicated for bright representatives of the blond, who, having short haircuts, will create a feeling of baldness and those who have focal thinning hair on their heads. The latter category of men is often advised to either grow their hair to a classic length, or shave their heads bald.

So, step-by-step instructions for those who cut their own hair:

Wash your hair and dry it well. Strands of medium length also need to be combed well;
If you have already had the opportunity to cut a man with a typewriter, then it will not be difficult to transfer the same actions to yourself. First, prepare the appliance by putting on the knife that matches the desired length of the bangs. Then sit down near the dressing table with a mirror and immediately prepare a second mirror on the stand, so that later it would be convenient to cut yourself with a machine from the back of the head;
Try to do without scissors even with long hair - this is inconvenient when cutting your own haircut. In extreme cases, if the technique fails, and the device cannot remove the required length in one go, first style the hair on the maximum nozzle, and only then adjust the desired length;
Bring the device with the attached nozzle to the roots from the side of the bangs and, moving the device towards the crown, lay the first track along the central device, without deviating to the right or left side. The following paths will pass alternately to each ear, adhering to the angle of the knife at which the nozzle is constantly in close contact with the head;
You can cut your own hair with a machine on the back of the head, already with the help of a second mirror, a smaller one, in which you need to look in such a way as to constantly see the entire back of the head and neck in the main mirror. Do not immediately try to organize smooth transitions, endlessly changing the length nozzles - process the back of the head with a small knife to the edging, give the desired length to the hairs on the temples and around the ears, and only then, using a knife No. 2 or No. 3, soften the borders of the transitions wherever necessary.

Important! It is advisable, at the final stage, when a razor is used and the space of the neck under the back of the head is outlined baldly, to turn to the help of a third party.

Be friends with scissors, don't be afraid to experiment, trust your hands - you can cut your hair at home on your own. Not as difficult as it seems at first glance. The main thing is to strictly follow the rules, gradually move from stage to stage. In the article we will tell you what you need in order to try yourself as a hair stylist, how to cut long hair, trim split ends, make bob, bob, cascade haircuts.

What do you need to do your own haircut at home?

Like a professional hairdresser, you should have a set of necessary tools at hand, comfortable conditions and hair prepared for a haircut:

The most important tool on which the result of hair manipulations depends is scissors. Dull blades can only spoil the hair, make the shape torn, asymmetrical. Decided to try yourself as a hairdresser - go to a professional store. Buy prof scissors with a blade length of 6 to 10 centimeters;
Mandatory conditions for the room - the presence of a large mirror in which you will see not only your face, but also the back of your head. Good lighting, a table for tools and styling products. Nothing should hinder the movement of your hands. If the room is densely furnished, move the interior elements away for a while, providing yourself with free space;
You know your hair better than any hairdresser. Heavy, naughty, porous, curly, brittle - take into account all the nuances and choose the haircut technique that suits you more than others;

Decide in advance what you want to do with your hair. Taking scissors in hand, you must act clearly according to plan, without improvisation. The technique of classic trimming the tips from the very first stages differs from the cascading haircut. Therefore, if you do not want to harm yourself, be consistent and do not be led by spontaneous desires;
Hair should be clean and damp before cutting. This is the basic rule and the very first stage from which a hair session begins in any beauty salon. Wash your hair and dry with a towel.

What tools are needed for self-cutting

Now in order. We equip the desktop. You will need 8 simple things:

Hairpins. Five pieces are best in different sizes (small for fixing thin strands, medium for thicker strands and large for clamps.
Rubber bands. The most common will do.
Classic massage comb. The size is average.
A thin comb with a thin edge and narrow teeth. Give preference to plastic.
Small mirror. With it, you will see your back of the head and side zones.
Large main mirror. It will be of great use to you.
Professional sharp scissors. Medium length blade.
Spray. Which in the process of cutting you will moisten the strands.

How to cut the ends of your hair

Trimming the tips is one of the procedures necessary for the health of the hair. So you get rid of the split elements, update your hair. First, let's talk about why hair splits.

Many factors can be avoided a priori:

Insufficient amount of fluid in the body. The daily minimum for a woman is 2 liters of water;
Bad habits: alcohol, smoking;
Excessive consumption of coffee. One of the properties of caffeine is the excretion of useful substances from the body that affect the health of the hair;
Avitaminosis. It can be both seasonal and chronic;
Inappropriate care products. Dry hair needs intensive nutrition;
Genetic features - dry tips can be inherited;
Consequences of diets. By limiting your intake of food, you are depriving your body of essential vitamins and minerals.

5 techniques for trimming split ends

Classic cut along one line. At home, quality can only be done on long hair. It is necessary to make a perfectly even border at the back.

Rubber bands. We collect the hair from behind with a tight elastic band, then every 4 centimeters we intercept the tail with other elastic bands. The tip that remains is under the cut. We loosen the hair and trim the length.

Semicircle. For independent use, the technique is suitable for long hair. We divide the strands into two equal parts horizontally. We throw the upper one forward and intercept it with an elastic band or a hairpin. Divide the remaining hair into two more parts (also horizontally). We stretch the occipital strands at a right angle to the head and cut in a straight line. We do the same with the bottom. We do the same with the top strands. Then loosen your hair, comb and correct the hairs that fall out of the total length.

Angle. Suitable for long straight hair. The principle of the technique is similar to the technique in a semicircle, only we divide the hair into more parts and make the angle more than 90 degrees. The form is voluminous, with smooth transitions.

How to cut short hair at home

Cutting short hair requires a clear implementation of the stages of technology. Memorize or print out a cheat sheet and put it in front of your eyes, next to the scissors on your desktop. 7 steps and you with a neat short haircut:

The first step is to moisturize your hair. To do this, you need a spray bottle with ordinary water at room temperature;
We divide the hair into several parts. Better four. If the length allows, fix with an elastic band. For short strands, use clips;
We start with whiskey. We separate the lowest strand, stretch it with a comb and cut the tips in a straight line. In the same way, we rise up, separating and cutting the tips of subsequent strands. Both temporal zones should be trimmed equally;
After the temples, we move on to the occipital region. We are equal to the already cut hair, slightly lengthening the cut line. According to the golden hair rules, the strands on the back of the head should be a little longer. So we cut the back often to the middle of the back of the head;
We draw in the lower strands remaining on the border of the cut hair and set them to the desired length. Further on the already worked out mechanics;
Remained the parietal zone. There is nothing new here - we equalize along the tips cut from below, gradually moving towards the center;
Dry your hair with a hairdryer, comb and carefully inspect the shape for flaws. Correcting broken hairs.

How to cut your own hair with a ladder

Ladder haircut - universal. Suitable for almost all types of face, has no age restrictions. We will tell you how to save your time and money and make this popular haircut at home. The instruction consists of 6 steps:

We start by moisturizing the hair. Spray from a spray bottle and gently comb along the entire length;
We throw the hair forward - so that it is parallel to the floor. Once again, comb and evenly cut off about 2 centimeters;
We get into the starting position and divide the strands into three or four parts, fixing them with clips or hairpins;
We start from the bottom back. We stretch the strand at a right angle to the head and cut it. We do the same with other curls of the back of the head, focusing on the length of the first;
Let's move on to the side areas. We take the lowest strand, pull it out and, equal to the length of the back of the head, cut the ends. Then we take the next strand and cut it 1.5-2 centimeters higher. According to this principle, we move towards the center from all sides;
We dry and comb the hair, correct the imperfections.

How to cut your own hair under a square

This haircut at home requires not only compliance with all the rules, but also elementary skills. If you've never cut your own hair before, it's best to practice split ends.

7 stages of self-cut haircut

Wash your hair, dry with a towel, comb thoroughly;
We divide the strands into seven parts: two zones at the back of the head, two at the crown, two at the temples, and the central one in front. To prevent hair from falling out, we clamp it with hairpins;
We start with the temporal zones. We take the bottom strand, stretch it a little (but not much, otherwise the length will suffer) and cut the line parallel to the floor. So we align the entire area;
Then we move on to the back of the head, focusing on the control strand - bordering on still untouched hair;
The very last cut is the front part, turning into a bang. The mechanics are the same - we are equal to the control strand of the neighboring zone;
Finishing touches - dry and comb the hair, paying attention to possible imperfections. We bring the form to perfection and do the styling.

How to make your own bob haircut

The technique is similar to a bob haircut, but has a number of differences. The technique is carried out in 5 steps:

We divide clean and damp hair into 7 equal parts according to the main zones: two occipital, two at the crown, temporal and central. We leave a thin line of strands for hair growth;
We start with whiskey. Pull out at a right angle to the head and cut. Strand by strand;
We pass to the back of the head. We measure the desired length along the control strand and cut the ends;
From the back of the head we move forward, focusing on the length of the previous curls. So we cut all zones, finishing with strands left around the circumference of the head;
We trim the back of the head with a machine, dry the hair with a hairdryer and style it.

We do our own haircut cascade

This is perhaps the simplest technique of all of the above. It is carried out in three stages:

We comb clean, damp hair and collect a high tail on the forehead, giving it clear, even edges of capture with a thin comb. The tail should be exactly in the center;
In a straight line, cut off the ends of the tail, taking into account the length of the haircut that you want to get in the end. We check if there are falling hairs, we correct the bundle;
We loosen the hair, comb and style. Haircut cascade is ready!

You can’t find a good hair-master, your hand confidently and without trembling takes scissors, as a child you dreamed of becoming a hairdresser - decide on an experiment! Start by trimming the ends. Having worked out the technique, move on to more complex techniques. You can create an actual, effective image with your own hands.

Hair care requires a lot of time and financial costs.

But they can be reduced if you dare do your own haircut, at home - do not let these words scare you.

Are you a successful busy woman and don't have time to book a haircut at a salon, or you simply don't trust your hairdresser with your hair? If you are not afraid of such experiments - you can cut your hair at home.

Some Tips For those who decide to do this:

To get started, buy hairdressing scissors(usually, they are very expensive, so it’s better to choose an option that fits your pocket, the main thing is that they are always sharp).
Also for a haircut at home is necessary a thick comb and a few hairpins.
Decide on a long hair before and after a haircut. Can take a ruler.
Required for a haircut large mirror, to which you need to turn your back, as well as a mirror into which you will directly look.
To start ( first haircut) you can try the simplest hairstyle - the same length around the entire circumference of the head.
Before cutting hair - first need to be washed but not dried.
If you have blonde hair- cut them on a dark background so that all the nuances can be seen, if dark- on the contrary, on a light background.

Cautions:

do not use scissors for cutting for other purposes;
for the first time don't choose too complicated haircut;
in order to make a cascading haircut, you need to purchase thinning scissors;
cutting wet hair, keep in mind that when dried, they become a little shorter;
blunt scissors leave "split" ends.

Benefits of a home haircut:

This is a great way to save time and money;
You can also do exactly what you planned with your hair (if possible);
You have the opportunity to change your image at any convenient time.

Cons of a home haircut:

From the first time, not everything will turn out well;
Secondly, you will have to clean the hair in the room where the haircut was done;
This may take a long time.

As mentioned earlier, you need scissors. Ideally, take the usual (sharp) and thinning (but you can do without them even with a cascading haircut). Also a few hairpins (clips) or elastic bands.

Sit in front of a mirror and lay the tool out in front of you so that it is convenient to take it at any time.
If you're a little nervous start cutting from the bottom strands- they can be covered with upper strands, if suddenly something goes wrong.
Also, to make cleaning easier, you can spread the cloth on the floor. This will save a lot of time.

So, let's get straight to the haircut.

The most difficult haircut is a cascade

First you need to decide on the length all the "components" of the cascade. After that, you can immediately proceed to the haircut.

In the right hand (if you are left-handed, then in the left) we take scissors, in the left - a strand of hair. Choosing a strand, twist it into a tourniquet.

Needs to be cut very carefully, cutting off only the part of the hair that is on top. Then it is recommended to stab the strand so that it is more convenient to cut the rest of the hair.

But there is another exotic, but simple, like everyone else ingenious way to make a cascading haircut- collect hair in a regular ponytail ... on the forehead. After that, decide on the length and just cut straight.

Comb your hair without removing the elastic to check if there is any uncut hair left. When you remove the rubber band - you will be pleasantly surprised how easy and fast they made such a complex haircut on their own at home.

How to cut the cascade at home? Watch the video tutorial:

How to cut your hair under the caret?

As with any haircut, wet hair and sharp scissors required. Choose the length of the caret, and divide the hair into several main parts: temporal, occipital and crown zones.

We also select strands and, pulling a little, cut off the required length. But important to remember that it is undesirable to pull the hair strongly, because after drying they will still lie down as they grow.

You need to start cutting from the front., gradually moving towards the occipital and crown zone. Hair should be kept parallel to the floor, this will make it as easy as possible to make an even haircut.

After you've cut your hair, dry and style your hair. Firstly, because the bob requires styling and care, and secondly, it will help you notice the long lonely hairs that you missed when cutting.

Trimming the ends of the hair

A very important aspect of care behind the hair is cutting the ends of the hair. It is done to prevent split ends of the hair, as well as to ensure that they (hair) grow better.

The procedure is not difficult at all. does not require much time and effort. It will take much longer and more expensive to do this in the salon, where you still have to queue and waste your time.

Therefore, we bring to your attention a few tips how to trim the ends at home with a minimum of effort, moreover, with a huge time saving.

Grab a section of hair with two fingers of your left hand and pull it to the length you want to leave. All that remains behind the fingers just cut off sharp scissors.

If you have curly hair, then you need to pay a lot more attention to the length you want to cut. After all, you need to take into account that after the hair dries, they will become much shorter (you need to be especially careful with bangs).

Video tutorial on how to trim the ends of the hair itself, look at the video:

The most important advice in any case, whether it's a cascade, a bob, or just trimming a bang, it's not like cutting too long strands right away.

Haircut check

Everything is quite simple here - drying and styling. It is advisable not to use for the first time, no styling products, especially heavy ones (wax, varnish). If the hair is very naughty - use light mousses, they do not weigh down the hair and allow you to maintain natural volume.

After installation take a thick comb and thoroughly comb your hair. In this way, you will get rid of cut hair that is tangled, and you will also see (if any) strands of different lengths or simply missed hairs that can be easily cut pointwise.

If you are concerned, you can contact to a specialist for advice. We wish you success!

Modern fashion proclaims well-groomed men the standard of beauty, regardless of the stylistic design of the image. Based on this, many representatives of the stronger sex are actively trying to change their appearance. Its changes directly depend on the condition of the scalp on the head. Sometimes you need a little haircut, and sometimes a new haircut is a cardinal change in the image of a person. Finding time to visit the hairdresser is not always possible. In certain cases, it is easier to cut yourself. This can be done with a machine without spending a lot of time and effort on this process.

Instruction

First step that needs to be done is to decide on the hairstyle model. There are two main options: under one nozzle and cascading with a transition. To make a regular haircut, you need to use only one nozzle, if a cascading one - 2 or more.

Before you cut yourself with a typewriter, you need to have a good comb your hair with a fine comb.

The tool must be taken in the working hand, if the man is left-handed, then he must hold the device with his left hand.

You need to start cutting your hair from behind tilting your head slightly forward. This must be done in order to smooth out small folds and irregularities on the scalp, and the nozzle is in close contact with the hairline. This will ensure that there are no small gaps and protruding hair.

The movements of the machine should be smooth, without sharp jerks and turns.. It must be clearly understood that the movements should be directed against hair growth. It is necessary to walk the machine again on the cut section of the hairline, so the haircut will be better. From time to time it is recommended to comb the hair on the head to identify problem areas where the level is not even.

On the back of the head make a straight line and then remove the nozzle and shave the neck. A razor can also be used to carry out this process.

After finishing the processing of the back of the head with a machine, you need to move on to the temporal zone, and then to the crown and front.

At the temples you need to be careful, because around the ears it will be necessary to make an even edging so as not to spoil the whole haircut. To do this, it is desirable to use a mirror.

If the hair is too long, then first they are cut with the largest nozzle, and only then they are leveled with the finishing one.

After the mission is completed, you need to use the fabric clean yourself of small hairs so that they do not prick and do not cause discomfort.

Care for trimmed curls

Any hairdressing procedure entails a stressful situation experienced by the hairline and scalp. When the strands become too short, the vulnerability of the scalp increases significantly, which opens up to the adverse effects of the external environment.

In order to increase the natural protective properties of the dermis of the head and prevent the occurrence of unwanted diseases, it is necessary to use nutritious cosmetic products for the scalp. It is recommended to use nourishing and moisturizing shampoos, and sometimes apply burdock or castor oil in the form of a mask.

The instrument must always be stored correctly in accordance with the manufacturer's recommendations.
Before using the device, it is necessary to check its serviceability and cleanliness. If there is contamination, cleaning must be done. It is worth remembering that you need to clean the blades after each use with a brush, which is almost always included with the tool.
Before you start cutting, the blades are lubricated with special oil, and the device itself is turned on for several minutes of idle operation for more effective lubrication.
You can clean the device from dust particles that have accumulated there using a conventional hair dryer.

Self-haircut is not a laborious and complicated process. To perform this procedure, you need a desire to achieve a certain result, as well as the implementation of the above recommendations. This will provide a great opportunity to constantly have a well-groomed hairline on your head.