Snowboarding and skiing are among the most accessible sports. And for an active and pleasant holiday you need appropriate clothing, reliable, waterproof, elastic. There are certain requirements for sportswear in general, and especially for winter sports. We want to enjoy our vacation, not have health problems.

To fully enjoy snowboarding, you will need:

1. Jacket;
2. trousers or suit;
3. special boots;
4. thermal underwear;
5. accessories.

How to choose the right snowboarding equipment, what to pay attention to first – we’ll look at it below.

Snowboarding clothing should be:

• Warm;
• Lightweight;
• Breathable;
• Waterproof;
• Windproof.

In clothes that restrict movement, the process of skating, instead of pleasure and a good mood, will bring disappointment. Therefore, when choosing, you need to determine:

• What material is the suit made of?
• Do you need a hood, extra padding around the wrists, a closed zipper (protected from snow accumulation).
• Determine clothing size. We raise and lower our arms up and down. The jacket should not ride up. Clothes that are too tight or baggy should not be worn, but trousers should be roomy.
• When deciding on the style of your suit, remember that classic colors are always appropriate and it is advisable that the suit have reflective elements.
• Large pockets are useful for glasses, for example, and small ones for a player or other small items.

Snowboarding equipment is multi-layered clothing, usually consisting of three layers: base, middle and top (outer).

• The bottom layers (inner and middle) can be selected from your home wardrobe.
• It is advisable to choose or buy a top layer made of waterproof fabric. Nowadays many different models made from special fabrics are produced. Clothing made from such fabrics has good thermoregulation and does not get wet.
• The base or inner layer is worn on the body and absorbs moisture that is released during active movement.
• Underwear consists of a T-shirt, pants and snowboard socks (must reach mid-calf).
• The second layer or middle layer is insulation, retains heat - a fleece pullover, a comfortable sweater, or special sweatshirts are better.
• The third outer layer of clothing is protective - this is especially durable and wear-resistant clothing.
• Pants worn over underwear should be wide enough.
• For beginners, it is better to purchase overalls to prevent snow from getting under their clothes.

Typically, jackets, pants, and overalls are also made of three layers:

1. The lining is made of natural, semi-natural or synthetic fabric.
2. Filling is usually regular goose down or synthetic, also often used.
3. The top is waterproof polyester or modern so-called membrane fabric. Clothing made from this fabric has the property of not letting moisture through, not getting wet, but removing excess moisture from the body, providing good thermoregulation.

Special boots must have protective and shock-absorbing functions. When purchasing, choose lightweight ones with rubber or foam rubber soles. It is better with a gel shock absorber, but it is also possible with a regular air capsule. Please note that the active part of the boot, which over time takes the shape of the leg, protects from impacts and sprains. By loosening or tightening the laces, you can adjust the stiffness of each shoe.

The difference between adult and children's equipment

For snowboarding, all men's, women's and children's clothing must be chosen from a professional assortment, designed specifically for the sport. Adult equipment differs from children's equipment mainly only in color – bright and colorful. A helmet and a fairly large hood on the jacket are also required for children. Adults, especially those who are not beginners, can get by with special hats.

Goggles, masks and gloves are required for everyone.

Children's clothing should have special carabiners for attaching gloves so they don't get lost.

A snowboarding suit should protect against injury from possible falls on ice or rocks. Be comfortable and spacious enough to not restrict movement when descending from snowy mountain slopes.

• It is very important to choose the right mount. If you decide to become a snowboarder then: first buy comfortable, reliable boots, then choose a good binding, and only now buy a snowboard. By acting in this sequence, you will avoid many unpleasant surprises.
• Glasses or a mask, preferably with double glass (will not fog up), will protect from sunlight, snow, wind and random branches.

No 0

You can fully devote yourself to snowboarding only if you have good equipment. Nothing should bother you or cause you discomfort, so pay attention to every detail, especially the choice of snowboarding clothing.

Snowboard outfits have a more sophisticated design, which consists of a larger arrangement of pockets, adjustments, Velcro, stripes and other elements. Most models are wider when comparing snowboard clothing to ski clothing. Inserts for reinforcement and additional protection are found in almost every suit that is intended.

Snowboarding clothing, including women's, is selected based on many parameters, including the characteristics of the outer fabric and insulation, the presence of additional features, the number of pockets and design. And it doesn’t matter what you choose: snowboard pants, a jacket or overalls. But you still need to take care of underwear, a hat, mittens and socks. We have a lot of work to do, so let's start choosing a wardrobe for snowboarding.

Layers are the main principle of choosing clothes

Every snowboarder's equipment should consist of three layers. This principle is mandatory and even fundamental.

Layer one - thermal underwear

The very first layer of clothing should not warm the body, as many novice athletes think. Properly selected underwear should not allow the body to become hypothermic. When we move actively, our body heats up, producing sweat to cool itself, which subsequently evaporates. The underwear should absorb moisture well and evaporate it quickly, without allowing the body to freeze. High-quality thermal underwear should consist of synthetics, most often polyester, which is designated PES. Thermal underwear may contain elastane in the form of lycra or spandex to ensure a tight fit to the body.

Natural underwear is not used by snowboarders because it absorbs moisture quickly and evaporates it very slowly. Also, you should not choose cheap synthetics, which do not have good absorbency.

The first layer of snowboarding equipment consists of a T-shirt/undershirt, pants and high socks. When choosing these elements, you need to strictly observe the dimensions, since in small underwear movements will be constrained, and large ones will not quickly remove moisture from the body.

Layer two - insulation

This layer has another task - to retain heat and remove excess heat. A good option for choosing insulation is a fleece sweatshirt or snowboard hoodie. This material is capable of excellent heat retention, and it will also promote the evaporation of moisture that will transfer from the first layer. You should not choose cotton and wool, since the desired effect will not be achieved. And again, we choose insulating clothing according to our size so that it is not tight and does not bunch up.

When choosing snowboard hoodies, you should definitely give preference to fleece models. The label must contain fleece or polartec. In extreme cases, you can choose cotton, but in this case the moisture that has passed through the first layer will be absorbed by the sweatshirt. This will create a film of water that will impair the hoodie's ability to breathe. The use of woolen items in this case is strictly contraindicated.

Such sweaters have become so popular that they are actively used in everyday life. In this regard, many different models and varieties of this clothing, which was originally intended for snowboarding, appeared. For example, snowboard jackets (hoodies, longs), which are at the peak of popularity, but are absolutely not suitable for ski slopes.

When choosing equipment for sports, you need to pay attention to specialized clothing and not confuse it with everyday clothing.

Layer three - membrane

If all the previous snowboard clothes did not cause difficulties in choosing, then choosing the third layer will be a little more difficult. The quality of work of all previous layers depends on this layer; it is the most expensive, high-tech and important when forming a snowboarder’s wardrobe.

The most important features are the ability to keep moisture out from the external environment, but also not to prevent its evaporation from the inside. Manufacturers put parameters on clothing that reflect the characteristics of the membrane. For example, with the designation “Waterproof (or Waterresist) 10000 mm” it becomes clear that the top layer of clothing is equal to 1 sq. cm will withstand a pressure of 10 liters of moisture. If the designation “Breathable 10000 gr” is available, one can judge the ability of 1 sq. m of top material, evaporate 10 liters of water. As this indicator increases, the material is more easily blown by the wind, so it is better to choose a middle ground. There is another characteristic of fabric that reflects its ability to breathe. It is designated RET: the smaller it is, the better the clothing will provide air exchange. Women's and men's clothing do not differ in these parameters.

We collect full equipment

We've sorted out the first half of the wardrobe, it's time to choose a full set of uniforms.

This wardrobe item is worn on top of thermal pants. Snowboard pants are available in a wide range, among which it is easy to get confused and choose the wrong model. Initially, you need to clearly understand what these pants will be used for. Bolognese snowboard pants with synthetic padding are absolutely not suitable, as they will get wet in no time.

You need to understand that in pants you will not only have to go down the slopes while in active movement, but also sit calmly on the lift. Therefore, pants should provide good warmth and wick moisture away from the body. The weather in the mountains is unpredictable; there may be sleet or even rain. So the waterproofness of the pants should be at a high level.

Snowboard pants should have a medium width: narrow ones will get in the way when performing difficult tricks, and wide ones will get in the way when walking. Good pants should have belt loops and several pockets. To prevent snow from getting inside your pants, there should be so-called bells on their lower part. This is the name for inner cuffs that can be pulled over boots and thus prevent snow from getting under your pants.

Some manufacturers add an additional layer of insulation to vulnerable parts of the body - the knees and the back of the legs. And you won’t freeze, and falling won’t hurt so much. An optional but preferred element in snowboard pants is ventilation, which can be internal or external. She contributes her share to comfortable skating. It is better if the ventilation is closed with a zipper, and not with Velcro, which quickly wears out and can open on its own.

To ski on equipped slopes, pants must have a Waterproof rating of 8000–10,000 mm, and to conquer virgin lands you will need snowboard pants with higher ratings.

We almost forgot about the lining, which is present in insulated and even some models of lightweight pants. Fleece, cotton, but not nylon lining. High in the mountains, you'll thank yourself for choosing the right pants with a breathable lining that won't stick to your sweaty feet.

Some types of pants

We’ve sorted out the general concepts of choosing pants, all that remains is to familiarize yourself with the types of pants and choose the most suitable ones for your situation. Fans of extreme skiing are better off choosing snowboard pants in the form of overalls with a chest or at least with suspenders. They will be warmer and when falling into a snowdrift, they will not let snow inside. The female half of the population and young athletes are not particularly fond of such pants, but you need to worry about your health despite fashion.

Self-resetting models are an excellent option. Don't be afraid of such a name; they won't fly off their feet. The design allows you to get rid of your pants without removing your boots. The secret is hidden in the presence of a zipper along the entire length of the pants, when unzipped you can easily take off the pants and just as easily put them back on later. This innovation will appeal to fans of ski mountaineering.

Initially, it is worth selecting those snowboard jackets whose fabric has high breathability. In such clothing, internal moisture will not accumulate under clothing.

It is extremely important to choose the right size jacket. When trying on, you need to raise your hand up and make sure that the sleeve does not pull and the jacket itself does not climb up. Preferred are those models that have the ability to be adjusted (bottom, sleeves, hood). If you don’t want to get snow out from under your jacket, then choose a model with a so-called skirt.

The minimum acceptable Waterproof value for the membrane is 5000 mm. But such clothing is also suitable for vacationers, and for athletes, and especially for professionals, the figure should be in the range of 8000–10000 mm. All zippers that are on the jacket and even on the pants must be well sewn and covered with moisture-resistant inserts.

Pockets on jackets are not for beauty, they perform an important function - they take care of the safety of valuables. There should be a lot of pockets, and they should be reliably protected from snow and moisture. Convenient pockets should have a reliable zipper that fastens from top to bottom, and strips covering it.

Shoes, glasses, gloves

You need good boots, warm, waterproof, but breathable. If your feet are cold, then a good jacket or warm pants will be of no use. You can choose the right shoe size using a special table that displays the correspondence of shoe sizes from different manufacturers. Women's snowboard shoes may differ from men's if the manufacturer took into account the physiological characteristics of the structure of women's feet. But this does not always happen, so women’s is not highlighted as a separate topic.

The hat should provide protection from the wind, fit well on the head and not limit your view. In the “hat + helmet” set, the first element of the wardrobe can be thin. If you decide to abandon the helmet, then choose a warm hat that will contain natural material and up to 20% polyester.

Your eyes must be protected from snow, sun, wind, branches that may get in your way, and ice. If you choose between glasses and a mask, then the second element is preferable. A snowboarding mask fits better on your face and is more difficult to lose if you fall. It is better to choose models with double lenses - they will not fog up longer. The mask should not impede breathing or limit visibility.

Hands also need protection from snow, frost, ice and injury. For this, special snowboard gloves are best suited, which are made from material with similar characteristics, which were described in the section on jackets. Among the innovative solutions used to create gloves is additional protection on the wrists. Gloves should be as comfortable and ergonomic as possible so that you don’t have to take them off every time you need to take your phone or pass out of your pocket.

If you follow these simple tips, your winter holiday will be comfortable, pleasant and warm. And you will not be different from the professionals because of your poor equipment, which will not allow you to ride to your heart’s content and will make you chill to the bone.

Updated: 02/14/2018 15:32:02

The right jacket for snowboarding plays just as important a role in ensuring comfort as the right boots or the right board. It should protect against changes in temperature and wind, level out falls, remove sweat generated during movement to the outside, and also not let moisture in from the outside.

The best snowboard equipment manufacturers

Many companies currently produce high-quality equipment for snowboarding and alpine skiing, but preference should be given to trusted companies specializing in the production of clothing made from various membrane fabrics:

Models from the manufacturers described above are excellent for both active riding and use in everyday conditions. This is evidenced by numerous reviews on the Internet - both on forums and on social networks.

Types of snowboard jackets

Without exception, all jackets for snowboarding are modern equipment based on membrane fabrics. It is thanks to them that those notorious characteristics of vapor permeability and moisture resistance, which are key when choosing good snowboarding equipment, are ensured.

Depending on the type of membrane All jackets are divided into three types

Jackets based on a non-porous membrane. As the name suggests, this material does not have any pores or openings designed to allow moisture particles to pass through. The removal here is carried out according to the osmotic principle - once on the surface of the membrane, a droplet seeps out, and a special top layer prevents its penetration back. The disadvantages of such jackets include slow moisture removal, as well as high cost;

Porous membrane jackets. The design of such models is simpler - moist air is vented outside through a special porous structure, due to which the “breathing” characteristics of these models are at a fairly high level. The disadvantages of such models include the rapid failure of the membrane due to improper use, as well as the need for care and washing;

Jackets made from combined membrane fabrics represent something in common from the two types described above, thanks to which it was possible to combine the advantages and eliminate all the disadvantages. There is only one left - such jackets are very expensive.

The main criteria for choosing a snowboard jacket

Jacket size

You should choose equipment based on the exact size correspondence to your own anatomical features. A jacket that is too small will cause a lot of discomfort and hinder movement; a jacket that is too large will not be able to carry out proper thermoregulation, which can cause the rider to sweat and freeze. You can’t do without trying on a jacket before purchasing, and it should be done for the equipment that will be used when skating.

Seam taping

An important point that affects comfort and dryness while outdoors. As a rule, jackets begin to leak along the seams, and therefore all seams without exception must be taped. This is evidenced by the inscription “all seams are sealed” on the jacket tag. This information should be double-checked - many, especially budget manufacturers, glue only those seams that are located in the visible zone, leaving untreated areas hidden from human eyes.

Cuffs and zippers, pockets

Little things that have a significant impact on comfort while riding:

The cuffs should be made of soft rubber material and have a two-layer structure, thereby preventing the passage of moisture inside during active driving. The material of the inner layer should be soft and pleasant to the touch - this is the only way to avoid discomfort;

The zipper of the jacket is treated with a special compound that prevents the passage of moisture inside. Its design must be of considerable size so that it is convenient to unfasten and fasten it without removing gloves;

Pockets are also important. Deep and dense, they must be equipped with special dense linings, and also be securely fastened with a zipper to prevent moisture from getting inside;

Membrane moisture resistance

Indicates the amount of precipitation that a jacket can withstand over a certain period of time without leaking

The minimum acceptable value is 5000 millimeters. This jacket can withstand prolonged light rain;

Most models in the mid-price range have a moisture resistance of 10-20 thousand millimeters. It is quite sufficient for most operating conditions;

The most advanced and, accordingly, expensive jacket models have moisture resistance ratings of 30-40 thousand millimeters. Such a membrane can easily withstand a serious downpour without getting wet.

Membrane vapor permeability

An indicator indicating the amount of moisture removed by one square meter in 24 hours. The higher this parameter is, the better.

The basic value capable of providing acceptable comfort is considered to be 5000 m g\sq.m.;

The average value typical for most models is 10,000 g/sq.m;

The best models from well-known manufacturers can boast of a membrane that removes from 20 to 30 thousand grams per square meter of fabric in one day;

We should not forget that membrane jackets are extremely difficult to care for, and therefore washing them in a washing machine along with regular clothes is strictly prohibited. Cleaning of such equipment is carried out exclusively manually with the addition of various membrane conditioners and products recommended by the manufacturer of the material.

Choosing a snowboard jacket occurs in two main stages:

First of all, you need to study the indicated size and compare it with the clothes you are wearing. This information is printed on the label and presented in the form of classic numbering, as well as the closest foreign analogues;

Having selected the appropriate size, the jacket is tried on. For this purpose, you need to resort to the clothes or thermal underwear that will be used when skating. The jacket should fit comfortably, not restrict movement and not cause discomfort when performing active exercises.

In just a few decades, snowboarding has confidently entered the TOP of winter sports and received an Olympic license. The army of his fans is regularly replenished with new recruits. The amazing world of riding attracts with bright emotions, high speeds, and drive. Every intrepid ski-board climber should have a jacket in their wardrobe.

Beginner riders often face problems when trying to choose a jacket. The symbols and letters of the labels mean nothing to them. In fact, everything is not so difficult. When looking at the label, you should pay attention to the following inscriptions and numbers:

Knowing what the inscriptions on the labels of snow jackets mean, choosing an item of equipment will not be difficult. The size range does not differ from the usual gradation adopted for down jackets.

What is the difference between a sports jacket and a snowboard jacket?

The rider's outerwear differs from the classic suit of a slalomist or a downhill master. Women's and men's loose-fitting snowboard jackets do not restrict the athlete's movements at all. Their indispensable attributes are a voluminous hood with drawstrings that easily fits over the helmet and spacious pockets.

The lining of the jackets is made of special membrane fabric. There are ventilation pockets in the armpits, back and sleeves. An internal cuff that stretches over the wrist prevents snow from getting under the sleeve. The stand-up collar protects the neck from the wind. Bottom ties help keep you warm longer when riding in frosty weather.

Snowboard Jacket Material

The changing nature often brings surprises to tourists who go to the ski resort on the weekend. Therefore, snowboarders are accustomed to conquering the slopes in any weather. Their clothing is designed specifically to ensure comfortable riding.

Jackets have a complex structure. A membrane is hidden under a dense and durable coating. Behind it is insulation and lining. Each layer performs its own task. The main functions of regulating heat transfer are assigned to the membrane.

Characteristics of different types of membranes

This material has unique features. It absorbs moisture released by the body, keeping the snowboarder feeling comfortable. Experts distinguish three types of membranes:

1. Porous. The mesh has holes so small that not even a molecule of liquid can escape. But steam penetrates freely through the material. The membrane works excellently, with the exception of one drawback. The microscopic cells become clogged over time, and the perforated base is not very durable. Therefore, jackets with such a membrane need delicate washing.
2. Poreless. The material has a tendency to active diffusion. Moisture accumulated on its surface is absorbed and discharged out in the form of condensation. The membrane base is durable, resistant to stretching and wear.
3. Combined. A composite material consisting of two components - porous and solid. It has the advantages of other types of membranes and does not have their disadvantages. Jackets with a similar innovative component are included in the equipment of board aces.

Membranes can consist of 2, 3 or 2.5 layers. On the reverse side they are protected by a fine mesh or a coating of foamed synthetic material.

Water-repellent impregnation

While the inside of the athlete’s body is protected from excess moisture by a membrane, the outside is protected by a special coating of the jacket. The impregnation perfectly repels water. Even the smallest particles of condensate contained in a dense fog are absorbed onto the surface treated with the composition into droplets. They flow down freely without causing any inconvenience to the snowboarder. The protective layer must be renewed periodically. Impregnation is available in the form of an aerosol. A can of the composition can be bought at any sports store.

What to look for?

Experienced snowboarders advise you to pay attention to several points when choosing a jacket. It should be light and warm. It is better to choose models with ventilation pockets fastened with zippers. The small visor of the hood will make riding in sunny weather comfortable.

The size is selected so that the clothing does not restrict movement when wearing protection. The bottom edge should cover the beginning of the thigh, and the cuffs should reach the hands when the arms are raised. A jacket that is too short is not an option. When it falls, snow will accumulate under it.

The quality of the seams deserves attention. In the best models, the stitching is completely glued or protected with tape. Leaky seams will get wet. When choosing a color, do not limit yourself. A rider in bright clothes stands out among the whiteness of the slope. Therefore, the likelihood of an accidental collision is minimized. The best outfit option would be a colorful, colorful jacket.

Popular makes and models

Many top companies produce sportswear for snowboarders. The following brands stand out from the general range:

1. Peak Performance. Produces the most elegant jackets for women and brutal models for men. GORE-TEX series membranes provide the highest level of comfort.
2. Norröna. The brand is especially popular in the Nordic countries. Equipment with a company logo belongs to the elite category of goods.
3. Marmot. Produces good clothes with membranes of the NanoPro family.
4. Patagonia. It is famous for its high-quality clothing for freeride, snowboarding, and winter tourism.
5. Haglofs. The company's models are relatively inexpensive. The key to the popularity of branded clothing is 100 years of experience in producing sports equipment.
6. Columbia. Creates cheap but high-quality equipment for snowboarding.

Knowing what to look for when choosing snowboarding gear will make purchasing easier. It will be much more pleasant to ride a board in a warm, comfortable, beautiful one.

How to choose clothes for snowboarding. To ride, just a board, bindings and boots are not enough. Good equipment is not complete without clothing that is comfortable in all respects. Of course, the weather and tastes will dictate how a snowboarder should dress, but still, there are certain criteria and recommendations.

Bottom layer of clothing

Let's start with what you should have under your top layer of clothing. If you are an active snowboarder, and are not used to sitting for hours at the top of the slope, or on the park run, then you should avoid popping. Of course, cotton is quite warm if you move little, but if you move a lot, you will sweat very quickly - and all the moisture will be retained in your favorite T-shirt and socks. Being wet, you will begin to experience discomfort, and in the worst case, you will feel noticeably cold. The conclusion is simple - use
.

Thermal underwear includes socks, underpants, and a jacket. This is usually made from either natural wool or synthetic materials, which also effectively retain your body heat and perfectly wick moisture away from the skin to the top layer of clothing.

More information about which thermal underwear is better to choose is written in more detail at the link above.

Top layer of clothing

In snowboarding, body mobility is high. Only the legs remain locked together, and even then, there are also tricks on a snowboard, the implementation of which requires one leg to be lashed. Therefore, the first rule is that clothes for snowboarding should be completely simple.

For this reason, the vast majority of snowboarding pants and jackets are distinguished by their rather large width. The exception is the narrow style, which only affects the lower part of the rider's equipment.

We will start from the bottom of the athlete’s outer equipment. Let's leave out such things as selection by design and so on - this is a matter of taste. Let's focus on the practical part. Regardless of what weather conditions you buy equipment for, you should pay close attention to the quality of the clothing membrane.

Good snowboard pants should have a value of at least 10,000. Alas, the frequently encountered “five” may not be enough - such a membrane quickly gives up, especially in fairly warm weather. As soon as you sit down on the snow in these pants, you will immediately feel its unpleasant wet essence. So take pants with a membrane of 10,000 - no less.

Ventilation in pants is important. An excellent option for ventilation is the drop-down sides in the area of ​​the knee joint. Such half-meter pockets perfectly remove excess accumulated heat, and just in the very place where it is especially needed. This ventilation option is especially popular with snowboarders who wear knee protection - it can sometimes be difficult not to sweat.

Of course, you shouldn’t even look at pants that don’t have “skirts” at the bottom. Skirts pulled over a snowboard boot ideally protect the rider from snow getting inside - those rare variations of clothing that cannot boast of this can be safely considered an unsuccessful option for equipment.

A little about snowboard jackets. 5000 units of membrane fabric may be enough for a jacket, although here it is better to strive for more. Contact between a jacket and snow is a completely normal and frequent occurrence during skiing.

The optimal ventilation location for snowboard jackets is the armpit area. The hood of the jacket should be quite loose, and preferably an additional stitched visor, which will allow the hood to ergonomically stay on the hat in those rare moments when you ride without a helmet (after all, they are rare, right?).

The skirt is a very important accessory for a snowboard jacket. It is especially good if the skirt is compatible with additional fastenings on the pants, and can form a single body with them in the style of a jumpsuit.

No good snowboard jacket is complete without comfortable and reliable internal pockets: for a player, documents, money, phone. There should be additional pockets on your arms for your ski passes.

Such a jacket should fit as freely as possible. If you stretch your arms up in your outer snowboard clothing, and the sleeves do not remain pulled up, then you can be sure that it is most likely the right size for you. And remember, it’s always better to take a size larger than suffer later in a tight suit.

Mittens or gloves- the final part of snowboard clothing. Good boarder mittens are much more suitable for riding in almost all situations. The palm side should be rough, and the top side should be equipped with ventilated holes, and in some cases with carbon protective inserts. Fastening fastenings in mittens is quite convenient, for this reason, if you do not have a clear need for gloves, opt for good and universal mittens for snowboarding.

This is all. Ski in style, and wear only ergonomic clothes on the slope, in which you will not freeze or sweat, you will be able to move a lot and freely, and you will not be afraid that the fabric will tear on the snow, figures, or elements of the lift.