Pansies made of beads using the technique parallel weaving(Photo and video)

Pansies made of beads using parallel weaving technique (photo and video)

Bright and unusually delicate beaded pansies can become not only a magnificent decoration for your apartment, but also a wonderful gift for a loved one. Of these colorful juicy flowers you can create cute bouquets, small compositions and even make stunning necklaces and bracelets.

Master class on weaving pansies from beads

Perhaps it’s no secret that beadwork allows us to bring our wildest and most vivid fantasies to life. Thanks to this type of needlework, we can make a wonderful bouquet of pansies that will delight us with its beauty throughout the year.
We will begin our master class by preparing all the materials necessary for the work. We will need:

• glue "Moment";
• plaster or alabaster;
• pebbles;
• fabric leaves of a fern or other plant;
• small flowerpot;
• thin and thicker wire;
• green floss;
• small yellow beads;
• multi-colored beads: black, orange, green, yellow, brown, white, blue, as well as light and dark lilac.

Beading petals First, we will master the pattern of weaving the lower petal. First we will need to string 11 blue beads onto a thin wire, and then, moving away 5 pcs. Pull the wire to the side through the remaining beads again. Refer to the photo tutorial to clearly understand the weaving process.
Having carefully tightened the loop, we will need to string 1 more bead. Now we need to collect 11 more beads and make exactly the same loop. In the photo we see the first row of the future petal.



In order to weave the entire petal, we will need to complete 8 more rows, each of which will consist of beads of two colors:

• there are 4 dark beads on the sides, and 3 light ones in the center;
• in the middle there are 9 light beads, and on the left and right there are 4 dark ones;
• there are 3 dark ones at the edges, and 12 light ones between them;
• the middle is 12 light, and the edges are 2 dark;
• 2 pcs. dark, 10 pcs. light, 2 pcs. dark;
• 2 pcs. dark, 7 pcs. light, 2 pcs. dark;
• 2 pcs. dark, 4 pcs. light, 2 pcs. dark;
• 1 PC. dark, 3 pcs. light blue and 1 pc. dark.

As a result, you should end up with a petal that is narrowed downward.


Please note that we are not twisting the ends of the wire yet.
Next we will make a side petal consisting of light lilac and dark blue beads. The weaving pattern will remain almost the same. However, this petal will be smaller.
First, we will put 8 blue beads on the wire, and then we will put 10 more beads on one side and pass 1 end of the wire through them. You will get 2 rows at once.

• Row 3 will consist of 4 blue, 4 light blue and 4 more blue;
• 4 row – 3 pcs. of blue color, 6 blue, 3 blue;
• 5 row – 2 pcs. blue, 7 blue, 2 blue;
• 6 row - 2 pcs. blue, 5 blue, 2 blue;
• 7th row - blue on the sides, and 5 blue in the center;
• 8th row - one blue one on the left and right, and 3 blue ones in the middle;
• and the last, 9th row - blue, blue, blue.

We will need two such side petals as in the photo:


Now we will need to make the top two blue petals with our own hands. The first row will consist of 8 beads, the second of 10, the third and fourth of 12, the fifth of 11, the sixth of 9, the seventh of 7, the eighth of 5, and the ninth of three beads.

You can see for yourself that the weaving patterns of the petals are quite simple and, besides, they are practically no different from each other.
Making leaves At the next stage, our master class will tell you how to weave green leaves. We will do them according to a similar scheme:

• 1st row – one bead;
• then two;
• three more;
• then six;
• five;
• four;
• six again;
• five;
• four;

Using this method, we will weave the following leaves with our own hands:

Please note that all weaving patterns are almost identical. And you can choose the size for your leaves and petals yourself.
Stamens Our master class is almost coming to an end and all we can do is make stamens for flowers. For them we will need small beads and wire.
We put 2 yellow beads on the wire and, after twisting it, secure the resulting stamen.

Having done required quantity petals, leaves and stamens we will need to twist them together.
Assembling the flower elements First, we will screw the upper plain petals to each other. Then we will attach the stamen to them. Next, we twist the side petals and attach them to the top ones. Now we will need to screw the widest petal so that we can then hide the wire between the side and top petals. Having formed pansies from beads, you need to screw two leaves to each branch and wrap everything with floss threads.







For our bouquet we need to make 7 such wonderful flowers.
After you finish weaving flowers and leaves, you will need to “plant” them in a pot or flowerpot. First, you will need to glue artificial fern branches to the edges of the pot.
Then you will need to pour alabaster into the pot and sprinkle decorative pebbles on top. Having done this, you will need to quickly “plant” all the beaded pansies into the pot. Everything needs to be done carefully and quickly, since alabaster dries almost instantly.



Now our master class can be considered completely finished. Look what a wonderful summer bouquet we made:


For your pansies you can choose any color scheme. For example, you can get such wonderful flowers as in this photo:

Weaving patterns

The parallel weaving technique will allow us to perform various options colors. Here are a few patterns that you can use to weave leaves and petals for pansies:



Weaving pattern of the upper and side petals

Sepal weaving pattern
Leaf weaving pattern
Pansies can also be made using the French weaving technique.
To look at the finished bouquet of pansies made using French technology weaving you can watch a short video.

Video: Pansies using French technique

In this video you can clearly see that all the leaves are the same color. Dark green beads were used to weave them.
The flowers themselves are made of rich blue and gold beads. Gold beads are also used for their core. The bouquet looks especially impressive against the background of a light white vase.
In conclusion, I would like to show you a few photos in which you will see beautiful, bright and incredibly beautiful beaded pansies:

Bouquet made using the French weaving technique

Cute bouquet of pansies

"Flowers in a Basket"

Summer flowers woven using parallel weaving technique

Bright bouquet

Video: Lesson on making pansies from beads

Beading is best art creating magnificent compositions from small beads - beads. The most popular and easiest to make are floral motifs, for example, beaded pansies. A master class on this topic can be found on the Internet or in special magazines. Can be done individual flowers, collect them in small bouquets, create brooches, hairpins or plants.

Before starting the process, you should prepare necessary materials. To make flowers from pansy beads, you will need the following:

• Beads of various shades.
• Small yellow beads.
• Green floss threads.
• Small wire to create a stem.
• Wire with a special cross-section.
• A small flowerpot of any color or shade.
• Fabric leaves from fake plants.
• Alabaster.
• Colored pebbles.
• High-quality and expensive glue.

Creating a Large Bottom Petal

To make pansy flowers from beads, the weaving pattern begins with the lowest largest petal: Place eleven dark beads of the same color (for example, blue) on a thin wire, five of which will have to be moved aside, pass the end of the wire through the remaining six beads.

After this, alternate dark ones, in this case blue beads, and light ones, for example, lilac ones, make nice new rows:

Side petal weaving

This petal will be made from parts of two colors: dark - blue and light - lilac. Place eight dark parts on a wire, put ten blue parts on one end and pass the other end through these beads. Two rows of side petals should emerge. Complete the rows:

Twist the wire at the end. Then make a second identical petal with your own hands.

Making the top leaves

Prepare the top single-color petals of a dark shade (ours are blue). Work according to this scheme:

You can move on to creating leaves. To work you will need green material. The weaving pattern is as follows:

To create stamens: place one bead on a strong wire yellow tint, on the second - 1 more, twist the wire. There should be one stamen per flower. Make stamens according to the number of flowers.

To assemble the flower, twist the top two identical petals. Screw the stamens to the petals. Then twist the two side petals together, moving them at an angle of 900. Screw them to the top of the petals and the stamens. Attach the stamens to the petals.

Arrange the large petal from below in such a way that the ends of the wire on both sides are between the petals on top. Place the ends of the wire behind the side petals and twist them. Attach the leaves to the stem of the floss. The collected flower is quite similar to the real one.

You can decorate a hat with these flowers, sew them together and make a unique decoration by sewing it onto a base or a beaded flagellum. Or you can put them on a shelf as an interesting element and refresh your apartment and mood with them. An unusual bouquet of pansies will become the most the best present made with your own hands.

Attention, TODAY only!

Beading is a unique skill of creating stunning compositions from tiny beads - beads. The most popular and simplest designs are floral motifs, for example, beaded pansies. You can weave individual flowers, collect them into miniature bouquets, make brooches, hairpins or topiary - and all this will be equally beautiful and elegant!

Advantages of bead weaving

At all times of the existence of this type of needlework, products made from beads were considered noble and worthy of admiration, and embroidery and flower weaving - elegant decoration for fashionistas. This activity also brings another kind of benefit: the positive effect of beadwork on the health of the needlewoman has long been known. Several hours devoted to creating knots and loops with beads strung on them help not only to end up with a nice little thing, but also:

• cope with insomnia;
• train attention;
• get rid of headaches and even toothaches;
• improve your emotional state.

What a reason to go to the store for beading supplies!

Weaving pansies from beads

Even under the Tsar, bead weaving was considered a fine art, a symbol of luxury and wealth. Embroidered or beaded items were always in prominent places in the homes of aristocrats. Flowers made of beads, the weaving patterns of which were passed down from generation to generation, served as decoration for outfits or as decorative items. One of the most popular floral motifs Since then, cute little flowers have appeared - pansies. The technique of weaving them is not too complicated; even a beginner can cope with “growing” small flowers. It only takes perseverance and time to weave pansies from beads. Master class with step by step photos will help you understand the technology.

First you need to prepare everything you need for weaving:

• multi-colored beads (a couple of shades of green, brown, yellow, red, lilac, blue, indigo);
• large yellow beads for stamens;
• wire (medium thickness for stamens, thin for stems);
• floss threads (dark green);
• glue "Moment".

Wide petal weaving technology

It is better to start implementing the beaded pansy pattern from the widest petal - the bottom one. You will need two of them per flower.

• 2nd row - 4/3/4 (choose the shade ratio to your taste);
• 3rd row - 4/9/4
• 4th row - 3/12/3
• 5th row - 2/10/2
• 7th row - 2/7/2
• 8th row - 2/4/2
• 9th row - 1/3/1

1. We get a petal that tapers towards the bottom. We do not twist the ends of the wire at this stage.

Technology for making the upper petal of pansies

To make plain upper petals, take bright beads (for example, blue) and, crossing thin wire in rows of beads, follow the pattern:

• 1st row - 8 beads;
• 2nd row - 10;
• 3rd, 4th rows - 12;
• 5th row - 11;
• 6th row - 9;
• 7th row - 7;
• 8th row - 5;
• 9th row - 3.

The bright upper petal is ready. For one flower you also need two of them. It is better to take more dark shade beads to create contrast with the ones below. These flowers will be bright on their own, and you can use them separately. For a bouquet, it is better not to get carried away with too contrasting combinations, otherwise the composition will be too bright.

Leaf weaving pattern

For the leaves we take green beads of a dark shade, you can make inclusions of light ones - this way the flower will look more natural. We carry out the following instructions by alternating beads:

• 1st row -1;
• 2nd row - 2;
• 3rd row - 3;
• 4-row - 6;
• 5-1 row -5;
• 6th row - 4;
• 7th row - 3;
• 8th row - 6;
• 9th row - 5;
• 10th row - 4;
• 11th row - 3;
• 12th row - 2.

Technology of stamens and flower assembly

The final stage of weaving pansies from beads is the creation of stamens.

1. We put it on a wire of medium thickness large bead yellow color, twist the wire.
2. Take another bead, thread a wire through it, and twist it. One stamen is ready.
3. Let's start assembling the flower. We twist the 2 upper wide petals.
4. We screw the stamen to two wide petals.
5. Twist with the top two.
6. Now we move the wide petals apart at an angle of 90 degrees, and place the wire between the upper petals, hiding its ends behind the wide ones.
7. Using floss threads, we make a stem by twisting 3-4 threads. First you need to coat the threads with glue.
8. We attach the leaves to the stem with the remaining ends of the wire.

Beaded pansies: master class

Beaded pansies: photo

Beaded pansies are a great start for those who are just starting to master beadwork. And for more experienced needlewomen small flowers are a wonderful springboard for mastering new bead combinations different sizes, as well as creating complex topiary and bouquets. Such miniature works can become an original gift or decoration in the house.

Pansies made from beads turn out to be very delicate and beautiful, and to make this beauty you will need a little patience and not a large set of materials, so their beauty will remain with us for a long time winter evenings, let's make a bouquet of these flowers. To make it you will need: beads different colors, wire for weaving, floral tape or thread (for decorating the stem).

PANSIES IN THE LOOP METHOD

Let's look at the technology using the example of a blue flower with a yellow center. For 1 petal, prepare a piece of wire about 45 cm.

1. String 8 yellow beads onto the wire and twist them into a loop.
2. We string 3 yellow beads on one end, blue ones, as many will go to the other edge, if you lay the wire around the loop and 3 yellow ones, make a twist.
3. 4 yellow beads, blue again, as many as will fit, 4 yellow. Wrap around 2 loops and secure.
4. In this row, knit 5 yellow beads along the edges, and as many blue beads as will fit between them.
5. This chain contains all blue beads. Twist the finished petal and cut off the excess wire.
6. According to the scheme, make 3 petals, in one make the middle of 9 beads (lower petal). Make 2 petals according to the same pattern using only one color of beads (blue). The middle can be done like this: put a bead on a piece of wire and twist it in the center. Cut off the excess wire.
7. Assembly: twist two plain (without middle) petals for the top together. Then add 2 side petals to them and immediately the middle. The last thing to attach is the bottom petal, before it needs to be bent to position it correctly. Lastly, wrap the stem with floral tape.

PANSIES IN PARALLEL WEAVING

We suggest not great master class on weaving a violet flower from beads with a detailed description and diagram in the photo below.

Let's start weaving from the bottom petal.

String 11 beads onto the wire, move 5 beads and thread the wire through the rest again, tighten the loop and put on another bead. Then we collect 11 more beads and make the same loop - we get the first row of the petal. To finish the leaf you need to weave 8 more rows. Designations: T – dark color beads, C – light color beads

• Row 8 – 2 T., 4 S., 2 T.
• Row 6 – 2 T., 10 S., 2 t.
• 4 row – 3 T., 12 S., 3 T.
• 2nd row – 4 T., 3 S., 3C,. 4 T.
• 3 r. – 4 T., 9 S., 4 T.
• 5 rub. – 2 T., 12 S., 2 T.
• 7 rub. – 2 T., 7 S., 2 T.
• 9 rub. – 1 T., 2 S., 1 T.

The result is a petal tapering towards the bottom. We do not immediately twist the ends of the wire. You need to make 2 side petals according to the following scheme.

String 10 beads onto a wire, bend it and string another 10 beads, pull the end of the wire through them, you get 2 rows at once. Then it goes like this:

• 8 rub. – 1 T., 3 S., 1 T.
• 6 rub. – 2 T., 5 S., 2 T.
• 4 rub. – 3 T., 6 S., 3 T.
• 3rd row – 4 T., 4 S., 4 T.
• Row 5 – 2 T., 7 S., 2 T.
• 7th row – 1 T., 5 S., 1T.
• Row 9 – 1T., 1 S., 1 T. Fasten the wire.

The two upper leaves are made of beads of the same color.

• 8 row – 5
• 6 row – 9
• 3, 4 row – 12
• 1 row – 8 beads
• 2 r. - 10
• 5 rub. - eleven
• 7 rub. – 7
• 9 rub. – 3. The petals for the flower are ready.

Now we will make leaves from green beads.

• 11 row – 3
• 9 row – 5
• 7 row – 3
• 5 row – 5
• 3rd row – 3
• 1 row – 1 bead
• 2 r. – 2
• 4 rub. – 6
• 6 rub. - 4
• 8 rubles – 6
• 10 rubles – 4
• 12 rubles – 2.

Using this weaving pattern we will get a jagged leaf. You need to make 2 of these leaves per flower.

You can make stamens by stringing small yellow beads onto a wire and securing them. After everything is woven, we begin assembling the product.

1. Twist two single-color petals and attach the stamens to them.
2. We twist the two side petals and attach them to the plain ones.
3. Screw the largest bottom sheet so that the wire from it can be hidden between the top and side sheets.
4. Attach 2 leaves to each stem.
5. Wrap the stem with floral tape or thread. You can make a lot of multi-colored violets and collect a bouquet.

PANSIES FROM CUTTING

We offer you another weaving option called French.

Do not cut the wire from the spool, roll it up and make a loop. String 3 pieces of cutting on it.

Then we wrap them four times with chopping wire and secure them as in the photo. There are 2 such petals for one flower.

To weave petals from 2 flowers, cut 30 cm of wire and twist a loop on it. Then work in accordance with the photo diagram. The leaf is woven according to the same pattern, only instead of 3 pieces of cutting, 7 are taken in the middle. For one flower you need to weave 3 leaves.

The center for the flower is made like this: string 12 pieces onto a wire. cutting and make 3 loops of 4 pieces, connect them as in the photo.

We collect the flower in this sequence. First, we wrap the petals around the core, which are woven from two colors, then plain ones, and lastly the leaves. Wrap the stem with thread or floral tape.

VIDEO LESSONS

Here you can watch video tutorials on weaving flowers from beads.

Beading is a unique skill of creating stunning compositions from tiny beads - beads. The most popular and simplest designs are floral motifs, for example, beaded pansies. You can weave individual flowers, collect them into miniature bouquets, make brooches, hairpins or topiary - and all this will be equally beautiful and elegant!

At all times of the existence of this type of needlework, products made from beads were considered noble and worthy of admiration, and embroidery and flower weaving were considered an elegant decoration for fashionistas. This activity also brings another kind of benefit: the positive effect of beadwork on the health of the needlewoman has long been known. Several hours devoted to creating knots and loops with beads strung on them help not only to end up with a nice little thing, but also:

• cope with insomnia;
• train attention;
• get rid of headaches and even toothaches;
• improve your emotional state.

What a reason to go to the store for beading supplies!

Weaving pansies

Even under the Tsar, bead weaving was considered a fine art, a symbol of luxury and wealth. Embroidered or beaded items were always in prominent places in the homes of aristocrats. Flowers made of beads, the weaving patterns of which were passed down from generation to generation, served as decoration for outfits or as decorative items. One of the most popular floral motifs from those times are cute little flowers - pansies. The technique of weaving them is not too complicated; even a beginner can cope with “growing” small flowers. It only takes perseverance and time to weave pansies from beads. A master class with step-by-step photos will help you understand the technology.

First you need to prepare everything you need for weaving:

• multi-colored beads (a couple of shades of green, brown, yellow, red, lilac, blue, indigo);
• large yellow beads for stamens;
• wire (medium thickness for stamens, thin for stems);
• floss threads (dark green);
• glue "Moment".

Read also:

It is better to start implementing the beaded pansy pattern from the widest petal - the bottom one. You will need two of them per flower.

• 2nd row - 4/3/4 (choose the shade ratio to your taste);
• 3rd row - 4/9/4
• 4th row - 3/12/3
• 5th row - 2/10/2
• 7th row - 2/7/2
• 8th row - 2/4/2
• 9th row - 1/3/1

1. We get a petal that tapers towards the bottom. We do not twist the ends of the wire at this stage.

Making the top petal of the pansy

To make plain upper petals, take bright beads (for example, blue) and, crossing thin wire in rows of beads, follow the pattern:

• 1st row - 8 beads;
• 2nd row - 10;
• 3rd, 4th rows - 12;
• 5th row - 11;
• 6th row - 9;
• 7th row - 7;
• 8th row - 5;
• 9th row - 3.

The bright upper petal is ready. For one flower you also need two of them. It is better to use a darker shade of beads to create a contrast with the lower ones. These flowers will be bright on their own, and you can use them separately. For a bouquet, it is better not to get carried away with too contrasting combinations, otherwise the composition will be too bright.

How to weave leaves?

For the leaves we take green beads of a dark shade, you can make inclusions of light ones - this way the flower will look more natural. We follow the following instructions for alternating beads:

• 1st row -1;
• 2nd row - 2;
• 3rd row - 3;
• 4-row - 6;
• 5-1 row -5;
• 6th row - 4;
• 7th row - 3;
• 8th row - 6;
• 9th row - 5;
• 10th row - 4;
• 11th row - 3;
• 12th row - 2.

Making stamens and collecting the flower

The final stage of weaving pansies from beads is the creation of stamens.

1. We put a large yellow bead on a medium-thick wire and twist the wire.
2. Take another bead, thread a wire through it, and twist it. One stamen is ready.
3. Let's start assembling the flower. We twist the 2 upper wide petals.
4. We screw the stamen to two wide petals.
5. Twist with the top two.
6. Now we move the wide petals apart at an angle of 90 degrees, and place the wire between the upper petals, hiding its ends behind the wide ones.
7. Using floss threads, we make a stem by twisting 3-4 threads. First you need to coat the threads with glue.
8. We attach the leaves to the stem with the remaining ends of the wire.