Wood mushroom for crafts. DIY mushrooms. Master class with step-by-step photos

Nature gives us a lot of useful things. Walking through the forest you can find a lot of material for making crafts. One of them is tree mushrooms. They can be found in the forest on tree trunks and old stumps.

To connect parts of wood fungus, indentations are made in them with a knife or awl, which are filled with plasticine or glue, then pointed twigs are inserted into them, matches and toothpicks can be used.

The variety of wood mushrooms in shape, color and size awakens imagination and suggests the idea of ​​​​creating a future craft. It all depends on your limitless imagination.

Let's look at some crafts made from tree mushrooms.

Young lady

Materials and tools

Tree mushrooms, twigs, cardboard. PVA glue, gouache, varnish. Knife, sandpaper, awl.

Description of making crafts

1. Cut off any rough edges and sand the bottom of the wood fungus with sandpaper.
2. Make indentations with an awl at the joints of the parts. Fill them with glue and assemble the craft using twigs.
3. Draw the doll's face with gouache and coat the craft with varnish.
4. Attach the product to a cardboard stand.

Dragon

Materials and tools

Tree mushrooms of different sizes. Acorn caps, small seashells, thistles, or other crafts for the eyes. Twigs. Knife, sandpaper, awl. PVA glue or “Moment”, varnish, plasticine.

Description of making crafts

1. Select tree mushrooms of the required size and shape for the body, heads of the snake and a couple for the small legs.
2. Sand the bottom rough parts of each mushroom with sandpaper.
3. Cut the branches to connect the parts and sharpen their ends with a knife.
4. Using an awl, make indentations for the joints.
5. Connect the parts using twigs, after filling the recesses with glue.
6. Attach the eyes using plasticine or glue with glue.
7. Cover the craft with varnish.

If desired, the craft can be supplemented with a tail of small wood mushrooms connected to each other and painted with colored nail polish.

"Merry Man"

Materials and tools

Tree mushrooms, twigs. Synthetic threads or an old broken doll's wig. Buttons, colored paper; fabric or woolen threads for a knitted hat. Knife, awl, sandpaper, scissors, knitting needles or needle. PVA glue, “Moment” or “Titan” and plasticine.

Description of making crafts

1. Select wood mushrooms for the head, body and legs of the man. You can find a weirdly shaped mushroom in which you can see all the parts of a person.
2. Clean and connect all the parts of the craft with each other using plasticine or twigs.
3. Glue the hair from the old doll to the head of the craft. Hair can also be made from combed synthetic threads.
4. Sew a hat for the man from fabric, or knit from thread, or make from paper.
5. Make the eyes from buttons, the nose and mouth from paper.

Princess Frog

Materials and tools

Tree mushrooms and twigs. Scraps of elegant fabric. PVA glue. Knife, awl, sandpaper, scissors.

Description of making crafts

1. Select tree mushrooms of the required shape and size for the head, body and eyes of the frog.
2. Clean the mushrooms, make indentations for joining the parts with an awl.
3. Cut and sharpen the ends of twigs or matches.
4. Fill the recesses with glue and connect the parts of the craft.
5. Cover the craft with varnish.

Cut out a robe for the frog princess from a beautiful fabric. Glue or tie the top end of the robe around the frog princess's neck.

Eyes can be made of paper or drawn with gouache.

Cheburashka

Materials and tools

Tree mushrooms, twigs, nut shells, peas, small dried flowers, colored paper, cut from a tree. PVA glue, plasticine. Knife, sandpaper, awl, scissors.

Description of making crafts

1. Select wood mushrooms for the body, head and ears of the toy, and trim the bottom of each mushroom with a knife.
2. Cut and sharpen twigs to connect parts.
3. Make indentations with an awl at the joints of the parts.
4. Connect the parts using twigs, first dripping PVA glue into the recesses.
5. Using “Moment” glue, glue the craft onto a base of cut wood, smearing glue on the lower part of the mushroom (torso) and the edges of the nut shells (legs), which do not need to be previously connected to the craft itself.
6. Coat the product with varnish.

All parts of the toy can be connected with pieces of plasticine, and not held together with twigs.

Cavalier

Materials and tools

Tree mushrooms, pine cones, twigs, birch bark, acorn, cut from a tree, tow or synthetic thread. Knife, scissors, awl. PVA glue.

Description of making crafts

1. Make a gentleman's shirt by combining three tree mushrooms. For the gentleman's head, choose an acorn.
2. To prevent the pine cones from which you will make panties from opening, cover them with several thick layers of varnish - it should get between the scales and glue them together.
3. After the varnish has dried, use an awl to make indentations where the parts join and assemble the entire toy.
4. Cut out a guitar and hat brim from birch bark. Make the top part of the hat from an acorn cap.
5. Glue hair made of tow or synthetic thread to the head of the craft, and a hat on top.
6. For the feet, use pine cone scales.
7. Glue the craft onto a stand made from cut wood, draw the gentleman's face.
8. Cover the craft with varnish.

Cheburashka and Crocodile Gena

Materials and tools

Chestnuts, fir and pine cones, acorns, veneer, twigs, colored paper. PVA glue, plasticine. Knife, scissors, awl.

Description of making crafts

1. For the head and body of Cheburashka, use chestnuts, and acorns for the legs.
2. Connect the parts by gluing pointed twigs into the recesses made with an awl. To attach ears cut from veneer, you need to make slits with a knife.
3. Using twigs glued into the recesses in the pine cones, attach the crocodile's paws, tail and head to the body.
4. Glue the crafts eyes, mouth, tie and hat from paper.
5. Glue Cheburashka and the Crocodile onto a stand made of veneer or cardboard; you can put plasticine under the halves of the acorn shells (Cheburashka’s feet).

Dinosaur

Materials and tools

Tree mushrooms of various sizes, pine cone scales, twigs, moss. Pistachio shells, acorn cap, black peppercorns. Cardboard. PVA glue. Knife,

Description of making crafts

1. Select wood mushrooms of the right size. Make indentations in them and connect them using pointed branches.
2. Glue cone scales between the parts or on top.
3. Cut out a cardboard stand and glue the dinosaur's body, four pistachio shells, and moss onto it.
4. The nose can be made from an acorn cap, and the eyes from peppercorns. All parts can be secured not with twigs, but with pieces of plasticine.

The craft is ready! Good luck!

Dear friends, we invite you to make your garden plots even more attractive. If you like to create interesting products, then this article is created for you. Today we will talk about how you can make mushrooms with your own hands. It is worth saying that this craft is very simple in its implementation. And landscape design will become even more beautiful thanks to such products.

Mushroom ideas for the garden

But now the time has come to show you crafts mushrooms for the garden. There are several options for creating them. So, the first option for creating a mushroom is the simplest. Surely, there are stumps on your site that were left after you cut down the trees. So, it’s worth adding hats to such stumps. These caps can be basins. Of course, they must have a size similar to the size of the penalty. Additionally, the stumps can be decorated with bright colors. And if there are no such stumps on the site, then use the log houses, which are placed in those places that require decoration.

Mushrooms can be created from other handy materials. In this case, pots and pieces of pipes will do. You can look for such materials in your attic or barn.

Another option for creating mushrooms is concrete mushrooms. This option is difficult. To create such a work of art: you need to prepare a solution that will contain sand and cement. You will also need molds in order to make these mushrooms. It's not worth buying them. For example, to create a hat, use a basin. You can also use half a ball or a construction helmet. To make the leg, use a plastic bottle. And with the help of a metal pipe you can connect the cap together with the leg.

Mushrooms can be decorated rather than left in their original form. For example, the hat can be laid out with mosaics or pebbles.

The third option for creating a mushroom is to create it from polyurethane foam. Garden crafts are often used to create country crafts. For such a mushroom you will definitely need a base. However, to create mushrooms you will need all the same elements: a bowl and a plastic bottle. Although the shape in this case does not play a significant role. In order to create a mushroom, you will have to use more than one layer of polyurethane foam.

There should be a lot of layers of foam. But before applying the next layer, you need to let the previous layer dry thoroughly. Then the already dried foam should be formed into a mushroom using a stationery knife. And at the final stage, the bend is primed and painted.

Option four is making a mushroom out of wood. In this article we list mushroom crafts for you and offer photos of them. As you can see, you can easily make them yourself. With a little effort, a piece of wood or an ordinary log will become a beautiful craft. To process a wooden surface you will need: a sander and a chainsaw. No skill is required here either. But if you don’t work hard, you will get an extraordinary product.

DIY mushroom crafts

Fungus.

Now you know how to make a mushroom with your own hands. But the mushroom craft for the home also looks interesting. And you can involve children in its creation. To make such a mushroom, take:

• Scissors, PVA glue;
• A popsicle stick and some construction paper.

Progress:

• Make an accordion out of a red sheet of paper. Each step should be 5 mm in size.
• The top of the accordion is cut off. The result should be a dome.
• The leaf is straightened and a stick is glued to its back side.
• The craft turns over. Circles are cut out of white paper. These circles are glued to the mushroom cap.
• To make the fungus funny, you need to cut out eyes for it. Then a mouth is cut out of red paper.

Fungus from a plastic plate.

Children's crafts mushrooms also look interesting. The materials here may be as follows:

• A disposable paper plate and a sheet of cardboard.
• PVA glue, brushes and paints, cotton wool and clothespin.

Progress:

1. You should make a small fold out of the plate. In this case, it is worth giving it a slightly convex shape.
2. The fold is lubricated with glue. Then they secure it with a clothespin and wait until the plate dries.
3. Make a roll out of cardboard that will serve as the stem of the mushroom. The glue should dry on the plate and on the roll.
4. The plate is painted using red paint.
5. Now you should tear the cotton wool into pieces of different sizes and stick it on a plate that has not yet had time to dry. As a result, you will get a hat that will resemble a fly agaric in its entire appearance.
6. At the next stage, the cardboard roll is painted. Then the top of the roll is coated with glue and glued to the plate.
7. Now all the fungus has to do is dry out.

Clothespin mushroom.

The next craft is not only a decorative element. It turns out it can be useful. For example, you can make a garland from such fungi and attach photographs to them. So, to do it, take:

• derwood clothespins,
• glue gun,
• white beads,
• snow-white fleece,
• thick rope.

Progress:

1. A figurine is cut out of fabric, which in its shape will be similar to a mushroom cap.
2. The mushroom caps are decorated with white dots. You can glue beads or cut circles out of fabric.
3. The finished hats are glued to the part of the clothespin that everyone holds onto to open it.
4. Thread a thread through the holes in the clothespins.
5. Bows are tied at the ends of the thread.

Plasticine mushroom.

If you decide to make a mushroom craft, then use plasticine. This craft is an excellent option for competitive crafts in kindergarten.

To make a mushroom, take plasticine and soften it in your hands. Then the plasticine is rolled into a tube. Next, a ring of 1 centimeter is cut from the material using a knife. This circle is rolled out into a pancake. A little more plasticine is cut from the tube. Roll up the stem, which is then attached to the cap. In order for the craft to look finished, you need to make grooves on the inside of the pancake.

Glass mushroom.

This DIY mushroom craft for kindergarten looks bright and original. To make it take:

• A glass jar with a lid of any size.
• Felt fabric of different colors.
• PVA glue or glue gun.
• Sintepon or cotton wool, paint and brush, as well as scissors.

Progress:

1. The jar itself is painted beige or white.
2. Green fabric is wrapped around the bottom of the jar. Blades of grass are cut out on one side of the felt. After which the grass is also glued around the can.
3. Red fabric is placed on top of the lid. A padding polyester is pushed under it to form a tubercle, like a fungus. It is worth making sure that the edges of the felt fabric are wrapped under the lid.
4. Figures are cut out from felt of various colors. They may look like flowers.
5. It’s worth cutting out a few more circles that will serve as cores for the flowers.
6. Strips are cut out of green felt, which should be thin. These are blades of grass.
7. To make a caterpillar, circles of different colors are cut out of fabric.
8. At the next stage, all elements are glued to the jar.

How to make mushrooms from natural material.

In our article you can see a photo of a mushroom craft. Indeed, we have prepared a lot of interesting things for you. In addition to all the products that we offered you, you can make mushrooms from natural materials, of which you can find very, very many in the fall. In order to build mushrooms you need: chestnuts and acorns. They are connected to each other using a glue gun.

Progress:

1. The acorns are separated from the caps.
2. And in place of the hat, a chestnut is glued in the middle.
3. To give your fungi stability, attach the back of the acorn cap to them. The resulting mushrooms are placed on a plate or board. They also scatter straw near them.

Finally

As you can see, there are a lot of mushroom crafts that you can simply make yourself. Just use your imagination and stock up on what you need. Involve children in this activity and create wonderful products with them.

Various crafts made from tinder fungus. Author's works.

“Not a twig, not a leaf, but growing on a tree.” Once in the forest, remember this ancient riddle and take a close look at dead and fallen deciduous trees, especially birches. The answer will come by itself - on almost every trunk of dried birches at any time of the year you can see tinder fungi.

More precisely, not the mushrooms themselves, but their hoof-shaped fruiting bodies. Above they are most often ash-gray or whitish, and below they are light yellow with tiny pores. The fruiting body of the tinder fungus is perennial, that is, it grows for several years, increasing in size by one step each year. Therefore, its hoof-like shape has a peculiar step quality.

The top gives an idea of ​​what the mushroom was like in the first year of its growth, the next step in the second, and so on. How many steps there are, how old is the tinder fungus. In the forest you can sometimes find giant tinder fungi, half a meter wide and a quarter meter thick. The mycelium of the tinder fungus penetrates deep into the wood and gradually destroys it. If a tinder fungus appears on a tree, this is a signal that the tree is rotten.

Nowadays, few people know that this seemingly worthless growth on tree trunks had a wide variety of uses in ancient times. It was prepared for future use along with other forest products.

With the help of tinder, for example, in the old days they made fire. Its suede fabric was cut into small pieces and boiled with saltpeter or wood ash. After drying, the pieces of tinder were softened with hammer blows and tinder was obtained - a substance similar to cotton wool, only brown in color. Using a steel flint, a spark was struck from the flint so that it would fall on the tinder, which began to smolder.

In folk medicine, tinder was used as a good hemostatic agent. In the taiga regions, balls were cut out of the light and elastic suede-like fabric of the tinder fungus. On the tubular bottom layer of dried tinder fungus, wood carvers trimmed knives and chisels. This method of finishing a knife is still good to know, especially if it needs to be done in the forest, where a grinding block is not always at hand.

Instead of a grinding block, tinder fungus can also be used in the workshop, after first soaking its spores in oil or gouache paint (chromium oxide) or rubbing it with GOI paste.

Various uses of tinder fungus.

Peasant artists also looked closely at the tinder fungus and managed to find various ways to use it in their craft. For example, spoon makers of the Nizhny Novgorod province applied patterns in the form of various stars, circles and diamonds to wooden utensils using signets carved from the tinder fungus. With a dye-saturated signet it was possible to make completely identical prints.

A modern felt-tip pen operates on the same principle: its rod is also impregnated with dye. Despite the fact that there are plenty of factory-made felt-tip pens on sale, in many countries some artists prefer to use homemade ones, the core of which is cut from the tinder fungus.

In a homemade felt-tip pen, the artist, at his own discretion, changes the shape and size of the writing rod. In addition, a damaged rod can always be replaced with a new one, since the material for it is not so difficult to find. But, of course, artists are most attracted to a homemade felt-tip pen by the unique beauty and richness of the lines obtained on paper.

But if draftsmen make tools necessary for work from tinder fungus fabric, then applied artists have noticed its unique decorative advantages. The tinder fungus tissue, cut into thin slices and specially processed, resembles real suede in texture, color and plasticity.

From tinder fungi that grow on birch and beech trees, you can get quite large pieces of vegetable suede. Of course, vegetable suede cannot be compared with real suede in terms of strength, but this drawback can be eliminated to some extent if a thin, durable fabric is glued underneath.

In terms of beauty, vegetable suede is superior to natural one. It has a very expressive texture with characteristic tints, a pleasant natural color from golden yellow to dark brown with greenish, reddish and ocher shades.

Forest suede can be used to successfully decorate all kinds of small boxes, boxes, cases for glasses, notebooks and many other similar items. Bookmarks for books, pendants, pendants, beads and other decorations are made from it, using a wide variety of technical techniques: embossing, inlay, appliqué.

Polypore on a birch and its section: a - suede-like fabric; b - pores.

Only tinder fungi that have not been damaged by insects should be harvested. Typically, damaged tinder fungi show small holes from which wood dust spills out. Clean the prepared tinder fungi from the hard crust covering them. The rind is cut off with a knife. If it turns out to be too hard, the tinder fungus should be soaked in cold water for about ten hours.

Cut one of the peeled tinder fungi in half and examine the cut carefully. You will immediately notice that the main part of the suede-like tissue is at the top of the tinder fungus, and it is also looser. Below the perimeter lie young, thin and dense layers.

Using a large, sharp knife, first cut the top part into thin slices, and then cut off the layers of suede along the perimeter. The remaining part of the tinder fungus consists of tubular pores. Try cutting the pores at an angle and you will see a very beautiful and distinctive texture, reminiscent of fabric.

This part of the tinder fungus should also be cut into thin slices. They will be useful for original decorative carvings. But unlike suede plates, they need to be dried under pressure so that they do not warp when drying. These plates are used to paste over and cover various objects, for example, caskets and boxes.

Then, pattern elements are glued onto the lined surface, pre-cut from the same plates, but having a slightly different shade than the background. For such carvings, the simplest tools are used - a knife or scalpel. The unusual material is cut very easily, and an elegant mesh pattern appears on the cuts. To ensure clean and clear cuts, the tools must be constantly adjusted.

Processing of tinder fungus: a - cleaning; b - cutting plates of suede fabric; c — softening with a mallet; d - tugging and stretching.

Now let's return to the plates from the suede-like part of the tinder fungus. They must be pre-processed. Place one of them on a thick board or the end of a stable ridge and mash it with not very strong, but even and frequent blows of a mallet (wooden hammer) or beater. Then knead each section of the workpiece sequentially with your fingers, bending and unbending it until a piece of vegetable suede becomes as elastic as natural one.

Suppose you are planning to decorate the lid of a box with embossed relief. As usual, in these cases you need to make a full-size sketch on a sheet of paper. Paste the finished sketch onto thick cardboard. Then cut out from this cardboard with a knife-cutter along the contours of the sketch all the parts that should protrude above the background in the finished product.

In the future, we will call these parts cut out of cardboard linings. Glue the linings in the order in which they were located in the sketch onto the lid of the box. After the glue has dried, the edges of the linings can be rounded by trimming them with a scalpel or a knife-cutter to make smoother transitions to the background.

Sequence of embossing: 1 - gluing cardboard linings onto the base; 2 - stretching the relief.

Now you can begin the final processing of the prepared piece of suede. Dip the hammered and crushed suede into cold water for a few seconds. Having taken it out of the water, place it again on a thick board or the end of a ridge and beat off all the sections evenly again. Now begin to gently stretch the suede with your fingers, starting from the edges and gradually moving towards the center. You don’t need to stretch it to the limit, but only slightly. You are kind of testing whether the suede will be flexible enough during the embossing process. With this test stretching, a piece of suede slightly increases in size and becomes a little thinner.

Lubricate the background and lining of the future relief with glue, put suede on top and smooth it with your palm so that it sticks to the protruding areas of the relief. Then, using your fingers, carefully lower the non-glued sections of suede to the lowest points of the relief, that is, to the background. It is clear that in this case the suede stretches and follows the shape of the lining underneath it. Thus, the lining and background are gradually covered with a single piece of suede. Where suede has lost its elasticity, it is lightly moistened with water using a brush.

After processing with fingers, the relief still has a rather generalized shape, lacking clarity. Only after processing with sculptural stacks does the relief become clear and take on a finished look. The dried relief is sometimes tinted with aniline or watercolor paints to enhance expressiveness. At the same time, the background is made darker, it creates the illusion of a deeper relief, and its pattern stands out clearly even in the absence of side lighting.

Suede beads and pendants are very easy to make. Beads are obtained by rolling pieces of suede into rolls in the shape of elongated isosceles triangles. In this case, the sharp tip of the triangle is glued to the roll with glue. And so that it does not unwind before the glue dries completely, it is wrapped with several turns of thread. After the glue has completely dried, the threads are cut off and the beads are strung on a thin twine or thick thread.

To make a pendant, you must first glue a piece of dark suede to a light one. If there is no dark suede, then paint any light suede with aniline paint diluted with potassium permanganate or iron sulfate. The glued pieces of suede need to be dried under pressure. After removing it from the press, lubricate one side of the workpiece with glue, carefully roll the workpiece into a roll and tie it with thread.

Making various jewelry from suede: 1 - twisting
suede strips and cutting the roll; 2 — pendants made of suede; 3 - method of cutting a piece of leather to obtain a strap; 4 - technique for making suede beads.

Once the glue has dried, carefully cut the roll into equal cylinders approximately 4-5 mm thick. In this case, the spiral patterns on each cylinder will be exactly the same. Glue several of these cylinders together, placing loops and tendrils made of narrow strips of suede between them. You can complicate the composition by combining twisted cylinders of different diameters. Finally, the pendant needs to be secured on a long narrow strap.

Since forest suede is not tensile enough, thin long straps will need to be made from scraps of genuine leather from old shoes. Round off all corners of the leather trim. Then, starting from the edge to the center, draw a spiral line, ensuring that the distance between the turns is constant.

It is clear that doing this by eye is not so easy. But a small device will help you cope with this task quite easily. Using insulating tape or thread, attach a nail to a ballpoint pen, the tip of which must first be rounded and sanded. This is necessary so that it glides easily over the surface of the skin.

The width of the future strap will depend on the distance between the tip of the nail and the ball of the pen. When drawing a spiral, you need to ensure that the tip of the nail moves strictly along the line drawn earlier by the pen refill.

Having drawn the spiral, cut the workpiece with scissors as accurately as possible along the drawn lines. So from a small piece of leather you can get a strap several meters long. For example, from a piece of leather measuring 100x60 mm, about two meters of strap with a width of 3 mm are obtained.

Of course, the strap that comes out from under the scissors will not be straight. But straightening it out is not difficult. Wet the strap in water and stretch it between two nails driven into the board. You can do it differently: tie one end of the strap to a nail driven somewhere high, and tie a heavy load to the other. Once completely dry, the strap will become straight. It is wound into a ball and stored in this form, used if necessary.

Making crafts is not only an exciting activity for children and adults, but also allows children to learn the simplest manipulations with natural and artificial materials, to show their imagination and originality of thinking.

It won’t be difficult to create attractive mushrooms at home. We will tell you what ideas you can use in our article.

Plasticine: a combination of simplicity and originality

This mushroom is easy to make. It is enough to roll out a cylinder-sausage for the leg from light plasticine and roll a ball from brown or red plasticine for the future hat.

The leg should not be too long - thickening is necessary at the bottom for a more durable attachment. You can make grass at the bottom. To do this, take the green mass, roll it into a sausage, and then flatten it. Using a knife, a fringe is cut out, which is then wrapped around the leg at its base.

Closer to the hat you can make a skirt. To do this, wrap a white plasticine sausage around the leg, secure it and slightly flatten it, as can be seen in the photo of the mushroom.

A hat with grooves will look original. The rolled out pancake for the hat is turned over. On the inside, grooves are made using a toothpick, running from the center.

To make a double hat, just roll two balls from white plasticine. One of them is flattened into a cake, which is fixed on the leg. A white ball is placed on top of the pancake. A pancake made of red plasticine is placed on top of the ball and smoothly flows around it, connecting with the white lining.

Plasticine can also be used as a connecting element - a ball of plasticine is placed on a vertically fixed acorn, and a chestnut cap is attached on top.

Penoplex product

With the participation of parents, you can make an original composition from the material used for wall insulation. A simple instruction on how to make a mushroom will help you. A leg and a cap are cut out of two pieces of penoplex using a stationery knife. The surface is carefully leveled.

On the inside of the cap, a recess is made in the center for joining. A little glue is poured into this hole to attach the ceiling tiles. A leg is placed inside.

You can color the craft using gouache. For better adhesion, PVA is added to it. The leg is painted a light color, and the cap is painted a darker color, such as red or brown.

After the paint has completely dried, the surface can be coated with ghost nail polish. It is important that you do not make any mistakes in applying the paint.

Several mushrooms can be installed in a shoe lid. The material used to wrap flowers as a substrate is preliminarily placed in it. The composition can be diversified with natural samples - dry twigs, leaves, cones.

Mushrooms from dough

To work, you need to prepare the dough. You will need half a glass of finely ground salt. Hot water is added to the glass with salt and the whole mass is kept in this form for an hour. After this, the solution should be poured into a bowl and add 2 tbsp. PVA glue for fastening strength, as well as flour. A novice master will be required to knead a thick dough.

The stem of the mushroom needs to be formed around the base in the form of a foil rod. The hat can also be wrapped around foil, or you can sculpt it without it. To secure it to the leg, treat the attachment points with water. The molded mushroom craft from salt dough is sent to the oven and dried over low heat for 10-13 hours.

If the composition is very large, then first the stem is dried for an hour and the cap separately, which must then be fixed hot on a support. After fastening, the entire structure goes into the oven. It is recommended to dry the extracted mushroom naturally, for example on the balcony.

The final stage is coloring. In addition to the mushroom, you can mold other shapes or decorate the composition with natural materials.

We use vegetables and fruits

As a basis for the composition, you can use a regular box, board or sheet of cardboard. Leaves or greens are placed on it. To make a mushroom-shaped vegetable craft, take several carrots that will act as legs.

Hats can be made from potato or apple halves. It is advisable to fasten the workpieces together using matches or toothpicks.

Paper mushrooms

Paper mushroom crafts at home can be made using different technologies. For example, the following sequence of actions is popular:

• take a sheet of colored paper and assemble it with an accordion in increments of 5-7 mm;
• then the structure is straightened and the top is cut off to form a dome of the cap;
• the reverse side of the cap is glued to an ice cream stick;
• You can attach white circles to the hat, and decorate the wand with a perky face.

An interesting model can be made from a disposable paper plate. Our master class on how to make a mushroom craft yourself will help you. A fold is made on the plate and a slightly convex shape is formed.

The fold must be treated with glue and clamped with a clothespin. To make a leg, roll a sheet of cardboard into a cylinder and glue its edges. An alternative could be a toilet paper cylinder.

The hat is painted red, and white paper circles or cotton wool flakes are attached to the top. The cylinder leg can be wrapped in colored paper or painted in the chosen color. The hat and knife are glued together using glue and then left to dry.

Mushroom compositions made using the quilling technique look original. The components are made in the form of tight twists of thin strips of colored paper. But if the hat is round, then the support should be given an oval appearance.

Sometimes the twist is pulled into a cylinder or dome. The result is interesting 3D compositions. Original ideas for DIY crafts can be offered to children who know the origami technique. Of course, it will take a little longer, but the result will justify the effort.

Mushroom crafts can be made from a variety of materials. Along with the options discussed above, more complex models are created from papier-mâché, felt and felt, etc. Your work together with your child will be exciting and interesting for all participants in the process.

Photo crafts mushroom

Master class with step-by-step photos. Cotton wool mushrooms

Chernikova Natalya Valentinovna, teacher of MBDOU d/s No. 24 “Polyanka” of combined type, Kstovo, Nizhny Novgorod region
The master class is designed for teachers and parents.
Purpose: as visual material for display in class; as attributes for attractions or when decorating for the autumn holiday.
Target: Making dummies of mushrooms with your own hands.
Tasks:
- arouse interest in making mushrooms using this technique;
- develop creative abilities

I was born on a rainy day
Under the young aspen,
Round, smooth, beautiful,
With a thick and straight leg (mushroom)

What is there in the toy store? But purchasing mushrooms is a problem. This means that you need to make them yourself. Let's try.
To work you need:
Sheets of cardboard
Gouache
Brush
Scissors
cotton wool
Long nails
Starch
Tea bags
Universal varnish for wood

Step-by-step process for completing the work:
1. Take cardboard and cut out circles of the required diameter. The size of the mushroom cap depends on the size of the circles.

2.Take a nail and pierce a circle in the middle. Depending on the length of the nail, the length of the leg will be determined.

3. Take a bag of starch, a bowl and prepare a starch paste. We dilute the starch with lukewarm boiled water to the consistency of thick sour cream. Boil water in a kettle and pour it into the starch “dough” in a thin stream, stirring vigorously clockwise. We obtain a liquid homogeneous mass. As the mixture cools, it thickens.
Advice- it’s better not to use too much starch so that the paste is runny. This paste is more convenient for work.

4. Take a lump of cotton wool, dip it in the prepared paste and place it on the circle with the nail.

5. Then we take cotton wool, grease it generously with paste, put it in layers on top, forming a mushroom cap and, gradually moving onto the nail, forming a stem.

6. We try to express each mushroom’s characteristic features by smoothing, leveling out unevenness, thickening or expanding the necessary parts.
Advice- adding each layer, the cotton wool should be thoroughly lubricated with paste.

7. Leave it to dry near the battery. Make sure that the mushrooms dry evenly. Mushrooms are very heavy and can deform the cap under the weight.
Advice- to prevent this from happening, we turn them over from one side to the other every now and then.
For complete drying, 2 days are enough. At the end of drying, the mushrooms become light.

8.Color using gouache and a brush.

9.Lubricate the mushroom stems from below with paste and sprinkle with tea leaves, imitating soil.

10. Coat the mushroom caps with universal wood varnish.

The finished result
You can use riddles about mushrooms; the mushrooms themselves will serve as the answers.

Come on guys
Solve riddles!
About interesting gentlemen
In beautiful fashionable hats,
who live in the forests
And they love the pine smell!

Look how good it is!
Red polka dot hat
Lace collar -
He's not new to the forest! (fly agaric)

Strong, dense, very stately,
In a brown and smart hat.
This is the pride of all forests!
The real king of mushrooms! (White mushroom)

I don’t argue - not white,
I, brothers, am simpler.
I usually grow
In a birch grove ( boletus)

A white column under an aspen tree,
Yes, the barrel of an orange.
And you don’t take it carefully
And you will leave traces of stains (boletus)

Mushrooms can be used to look at with children, identifying the parts of the mushroom, naming the color of the cap, and introducing them to the names. Give the concepts of “edible” and “inedible mushrooms.” Can be used as part of a GCD or entertainment, as a game exercise “Collect mushrooms”, “Find an extra mushroom”.