Crochet knitted cap for a boy: master classes. We crochet a baseball cap for a boy and for a girl: diagrams and a description of the work progress are attached Knitted cap for a crochet boy

Toward the middle of summer, the sun ceases to be so warm and gentle - it becomes sultry, quite aggressive, scorching and burning. Agree, ideal conditions for getting a sunstroke ... A crochet summer knitted baseball cap is the perfect solution for both children and adults! Knitted from light-colored breathable cotton yarn, it will serve you not only as an original decoration, but also as a quite practical headdress. How to connect it and what is needed for this? Let's figure it out together today!

Crocheted summer baseball cap

tools and materials:

yarn "Narcissus" (100% cotton, 400 meters per 100 grams) - about 50 grams;
hook number 1.75;
scissors;
a small piece of blue fabric;
blue threads;
needle;
cardboard.

This cap is designed for a head circumference of 47-48 cm, however, following the knitting pattern and adjusting the number of loops, it can be made to any size.

Basic knitting pattern - sirloin mesh: alternate 1 s. from n. and 2 c. n., one cell is two s. from n. and 2 c. n. between them.

Description

The scheme consists of two parts.

First part

Baseball cap depth

Knitting starts from the bottom.

We carry out work according to the scheme from the first to the tenth row inclusive - here we have an increase. As a result, we will get a flat round napkin, the diameter of which will be 13 cm.

11-13 rr.: we knit according to the scheme without increments.

14 p.: We start knitting the visor of the baseball cap. We need to understand that the line of the back of the baseball cap (the back of the head) is the line with in. p.p. The visor of the cap is located opposite this line. The center of the visor is located on the fourth line of bottom additions.

In the diagram in the tenth row, we marked the last addition of this line in pink.

14-22 rr. (that is, 9 rows) we knit in a circle, making additions only in the wedge of the visor according to the scheme.

Having connected all 22 p., we fix and cut off the thread.

The second part

Stage one

We knit according to the following pattern:

From the line with the addition of the visor, we count 17 cells and attach the thread to the 1st column of the 17th cell.

We knit two rows only along the visor line in straight and reverse rows, knitting decreases on both sides according to the scheme.

When we just start knitting the first row with decreases, the work looks like this:

Having knitted these two additional rows, we cut off the thread and attach it to the baseball cap area, which will be adjacent to the back of the head, from this point we continue circular knitting.

Important!

To reduce the number of knots formed when threads are attached, we unwind a small amount of yarn (for 2 rows along the visor line) at the beginning of knitting. Thus, after knitting the 22nd row, the thread will not need to be cut.

We knit with without n. along the line of the cap in each. bottom row loop. When we reach 2 knitted rows of the visor, we knit the last s. without n. in with. with n., to which a thread was tied in the 23rd p.

Pay attention to the diagram: this area is marked in pink.

After that, we continue knitting in the "fillet" technique without increments from the half stitch. from n. and in. n. So we perform the border row of the visor line, then we proceed to knitting its lower part.

Pay attention to the diagram where this row (25th) is marked in red.

Stage two

New row: along the line of the baseball cap, we also knit with. without n. When we reach the visor, we need to knit with. without n. in the last s. without n. lower river, 2nd c. p., 1 p. from n. in the 1st half. from n. lower river. along the visor line.

We continue knitting loin cells sz s. from n. and in. n. Opposite the lines with additions, we perform decreases (26th p.).

27 p .: along the line of the cap we knit with. without n., and when we reach the visor, we will need to knit 2 s. without n. in the 2nd century n. lower river. and 1 s. without n. in the 1st s. from n. sirloin mesh visor, 1 century. p., 1 half. from n., 1 c. p., 1 p. from n. etc. We continue knitting the mesh of the visor with decreases, as in the bottom row according to the scheme.
28 p.: This will be the last row in which we knit with. without n. along the cap line.
The transition to the visor part is carried out with exactly the same reductions as in the previous one. R.
Having connected the row to the end (we finish on the back of the head), cut off the yarn and tie it again, but on the visor.
29 p .: we perform reductions on the sides of the visor part of the work and add 2 more lines of reductions, departing from the center line. decrease by 6 cells.

We knit the decreases in the direction towards the central part of the visor.

When we knit the 33rd row, 13 cells will remain in the central part of the visor, taking into account the check marks.

Now our baseball cap, if placed on the table, looks like this:

On the reverse side, it looks like this:

Stage three

Visor processing

For starters, we recommend using a real visor from an old cap, shaping it with scissors into a more rounded shape. If you do not have such a visor, we suggest printing the pattern given below on a sheet of A4 paper and cutting out an insert from medium-weight cardboard.

The shape cut out according to the template must be sheathed with a fabric (preferably cotton with stretch, for example, from an old T-shirt) to match the knitted base. We make patterns from fabric with seam allowances of about 3-4 mm.

Now we need to stitch along the outer convex part of the visor, then turn the blank out and put a cardboard insert into it. Next, we tuck the unsewn edges inward and sew all the open sides of the visor with an “over the edge” seam, fitting the workpiece.

This is what the visor looks like after all our manipulations:

... and put a visor on top of it.

If we did everything right, the corners of the visor will rest against the extreme s. without n. 27 and 28 rows.

We sew a cardboard part to a knitted one, starting from the outer arc - the base of the 25th river, a row from half a st. from n., marked in red in the diagram. Here is what the work looks like at this stage, bottom view:

We tie the thread to the line on the back of the head and tie the baseball cap in a circle, taking into account the visor, one next to it. without n.

Stage four

Now you can try on a headdress and, if it is a little big, perform decreases every 5 loops (that is, we knit 6 and 7 p. as 2 s without n together) - so we knitted the penultimate 34th row.

35 rubles: he is also the last. We knit 1 p. step by step.

Knitting is finished.

Now we only need to sew the inner concave part of the visor to the baseball cap, for which we use the “over the edge” seam and carefully sew the cardboard blank to the knitted part, slightly bending the row that we knitted with a crustacean step - this is how we hide the seam inside.

The baseball cap needs to be properly starched and dried on the form (for example, on a three-liter bottle).
In the center, under the baseball cap, at the bottom of the inverted bottle, you need to put a crumpled cloth. This is done so that the baseball cap, when dry, has a round shape, and not flattened.

Here's what we get when the baseball cap is completely dry.

If you do not knit an ornament from the category of flowers or butterflies, a cap knitted according to the above patterns will suit both women and men, and girls and boys.

If desired, it can be decorated in any way: embroidering a pattern with threads, decorating with buttons in an original way, adding an artificial flower / berries or crocheting a decorative flower.

Crochet baseball cap: video master class

Summer baseball cap with a visor for a teenager

Before starting knitting, we need to prepare the following tools and materials:

yarn Anna15 (100% Egyptian cotton, 530 meters per 100 grams);
Iris yarn for tying;
hook number 1.25.

Knitting is carried out immediately for two half loops.

The baseball cap is designed for a teenager of about ten years old with a head circumference of 53-54 cm.

Description

Bottom and base

Scheme

Having completed the knitting of the pattern, we continue to increase the diameter of the bottom - in the 1st column of the lower river. we knit 2 s. from n., then along the 1st s. from n., over in. p. we also knit 2 p., that is, we increase until we get 12 columns in the motive between c. P.

Next, we knit 14 p. according to scheme 2, shifting the pattern by one loop - in the 1st column we knit 2 columns, we do not knit the last column of the motive. That is, we have 12 columns with two v. n. between motives.

If you wish, you can knit more rows in the same pattern, creating a deeper baseball cap.

Visor

Now we start knitting the visor according to the scheme with half-columns with a crochet and yarn folded in half - for density.

You can increase the visor by adding additional knitting. R.

Having connected 9 and 10 rr., we repeat 9-10 r. once more, after which we repeat 9-10 rr again, but this time with changes - in the 9th r. perform additional. increments - * 2 semi-columns with n. in 1 p., 5 semi-columns with n * not 3, but 4 times on each side. After that, we complete the knitting of the visor, performing the 12th p.

Assembly

We attach the visor to the base with the help of s. without n.

We knit hearts according to the scheme proposed below:

We tie the inside. seam (the place where the visor and baseball cap meet) with a contrasting thread (we used red yarn). All ends of the cut threads are hidden under the red and the edge of the work looks neater.

We tie the entire cap along the bottom edge with the help of semi-columns with n. contrasting red yarn.

We do all the binding with Iris yarn, folded in half, or with a denser yarn of another type.

Description

The foundation

The main part of the baseball cap is knitted from three elements.

For the central element, we type 27 in. n. + 3 c. p.p., knit with. from n. 47 s., after which we knit two sidewalls according to scheme 1. We connect all three blanks with each other using s. without n.

Visor

Using a hook, we collect a chain of 28 in. p., we knit on them according to scheme 2, not forgetting about the increases on the sides.

We attach the yarn to the part in the place indicated in the diagram and knit for 24 s. with n., while in each corner we knit on both sides for 3 s. from n. vm. We knit like this until we reduce the number of loops to one. The second side is knitted in the same way.

Assembly

We insert a plastic visor and sew it to the knitted base. We starch the cap properly and let it dry on the form (ball, bottle, small inflatable ball).

A simple crochet baseball cap for beginner craftswomen

Description

Recruiting 136 in. n. + 2 c. p.p.

We knit round 1 p. with. without n., after which we knit 27 rr. like this: *2 s. without n., 2 c. *, repeat from * to *.

Then 10 rr. alternate * 2 s. without n. and 1 in. P.*.

Having completed this stage of knitting, we knit another 6 rr. simple s. without n.

We tie the visor according to the following scheme: * 2 s. without n., 2 c. *, repeat from 8 to *. We tie or sew the visor to the main part of the baseball cap. After that, we knit in a circle of the base 6 pp. with. without n.

We bend them inward as a fringing and sew.

The baseball cap should be starched well and allowed to dry on a round surface to create a rounded shape.

So I want to protect the head of my beloved son with something beautiful, but at the same time, it would definitely protect him from the influence of sunlight. It is this master class that will help you with this task, because you can try to create a crochet cap for a boy. Plus, crocheting improves fine motor skills of the hands, develops character traits such as perseverance, patience and determination.

Stylish and comfortable

The description of the manufacture of a cap for a boy can be traced on the example of a master class. This light summer cap will definitely please your little one.

Cap knitting was taken from a popular magazine. In the next steps, we will paint each row in detail.

To begin with, we measure the diameter of the head, because it is very important for work. It will depend on the composition of the threads whether the cap will stretch or not. To work, take nylon threads, hook number two. We collect four air loops on the hook.

With a connecting column we connect the chain into a ring.

We knit three lifting air loops and make eleven double crochets, close the row with a connecting post.

Again we make three lifting loops, we knit a double crochet into the first loop of the previous row, but because of the ch it seems that two are knitted from one loop.

In the previous loop of the bottom row we knit two columns with a crochet. We skip the third loop, knit a pair of air loops and enter the fourth loop, make two double crochets there.

In this way, we knit the entire row, use the scheme and alternate the pattern: two double crochets, a pass. We connect the end of the row with the beginning with connecting posts. Again we collect three lifting air loops.

We knit three columns with a crochet in this loop.

We string two air loops and knit a double crochet into an arch from the air loops of the previous layer of the cap. Again we throw two ch, then we make a double crochet, a pair of air loops and we knit four double crochets between two double crochets from the previous row.

According to this manipulation, we knit the entire row, close the circle with a connecting column.

Again we make a couple of connecting columns, now the hook is in the middle of four columns, then we collect three air loops, and in this place we knit three columns with a crochet. Next, we make two air loops and crochet into the arch of the previous row. We knit four columns with a crochet and repeat this chronology to the end of the row, we close it as usual with a connecting column.

In the next row, we again weave a pair of connecting posts, and then we collect three air loops.

We knit the next row according to the scheme: three air loops and three double crochets in one loop of the previous row. Then we make two air loops and fasten them with a double crochet into the arch of the previous row. Again we collect two loops and knit in the same arch with a double crochet. Then again a pair of air loops and insert the hook into the middle of the fourth column of the previous row, knit four double crochets.

We download the row and again exit with connecting posts to the middle.

Weave the next row in the same way as the previous one.

We knit the next row according to the scheme. We continue to knit the base of the cap according to the pattern.

This is how the circle ended up.

The last row of the scheme must be repeated eight more times. Next, in each loop of the previous row we knit with a double crochet, and in the next step we make a strapping from the connecting posts.

We knit a further pair of rows with single crochets, close the row with a connecting post.

Here we have such a cute hat.

For ties, we collect 33 air loops and knit them with single crochets to the base of the cap. Then we knit along the edge with single crochets and, without knitting six loops to the beginning, repeat the same manipulations again. We fix the thread to the base of the cap. Here we have a hat completely ready, but we need a cap. Therefore, we begin to weave a visor. Let's get to work.

We collect twenty-seven air loops and move according to the second scheme. To facilitate your work, we have issued it separately. But there are symbols: the number and the letter b “2b” - indicate the number of single crochet in each loop, and the letter “n” a pair of single crochet in one loop.

On a note! Do not forget that each row starts with a VP lift.

In the first row we knit: three columns without a crochet in one loop, 25 sc and 3 sc in 1 loop. Then - nn4bn5bn5bn4bnn; n4bn6bn (4 times) 4bn; the fourth row we knit two single crochets in one loop, the fifth - n6bn7bn15bn7bn6bn, we do the sixth, like the fourth, in the seventh - n and nine times 5bn each; We knit the eighth and ninth rows according to the scheme: a pair of single crochets in one loop. Tenth row: n and to the end of the row 5bn, the next two rows of single crochet, close knitting.

We sew, and in the end we got such a beautiful cap.

Video on the topic of the article

We offer you to view a selection of videos on making a cap for a boy.

I present to your attention a master class on crocheting a children's cap with a visor for a boy, decorated in a marine style.

Cap for a boy 1-2 years old (OD - 47 cm). For work, we need a 50 g skein of blue 100% cotton yarn (50 g - 180 m), as well as hook number 3.

MAIN PART OF THE CAP

1 row- we knit 18 double crochets into a sliding loop.

2 row- in each loop of the first row we knit a double crochet, in each 3rd loop we knit 2 double crochets - in total there are 24 columns in this row

3 row- (we knit with a sirloin net up to the 15th row): three lifting loops, a double crochet, one air loop, etc. - only 24 columns.

4 row- three lifting loops, in the first arch - 1 double crochet, one air loop; in the second arch - 1 double crochet, one air loop and 1 double crochet, one air loop, i.e. in the 2nd arch we knit 2 columns, etc. - 36 columns in total.

5 row- three lifting loops, in the first arch - 1 double crochet, one air loop, in the second arch - 1 double crochet, one air loop, in the third arch - 2 double crochets, alternating with an air loop, etc. - a total of 48 columns (photo 1).

6 row- we knit similarly to the previous row, only in every 4th arch - 2 columns with a crochet - only 60 columns.
7 row - 13 row- we knit without increments of 60 columns in each row.

14 row- we knit similarly to the sixth row, only in every 5th arch - 2 columns with a crochet - a total of 72 columns.

15 row- the last row of the sirloin net - we knit 72 columns without increments.

16 row- two lifting loops, in the first arch - 2 double crochets, in the second arch - 1 double crochet, etc.

17 row- two lifting loops, in each loop we knit 1 double crochet.

18 row - 19 row- one lifting loop, in each loop we knit 1 single crochet.

The main part of the cap is ready. We do not cut the thread, because then we will tie the entire cap together with the visor with a crustacean step.

HOW TO CROT A VISOR

The visor will take up a little less than half the diameter of our cap. To do this, fold the cap in half and in half again (photo 2).

We outline the borders of the future visor with a thread of a contrasting color (photo 3).

In order for the visor of our cap to expand in the center, we will knit it in short rows. We outline the borders of the shortened rows with a red thread. The visor will be knitted with a blue thread. The hook needs to be taken in a smaller size, we knit it tightly with a thread in 2 additions, so that the visor keeps its shape and is tough.

1 row we knit from the first to the last 8th thread with convex columns without a crochet. Thus, we slightly raise the visor of the future cap. After each 6th column, we make one increase. We complete the row with a connecting loop. The next 8 rows are shortened.

3 row- knit up to the 7th red thread.

4 row- knit up to the 3rd red thread (photo 4).

5 row- knit up to the 6th red thread (photo 5).

6 row- knit up to the 4th red thread (photo 6).

7 row- knit up to the 5th red thread.

8 row- we do not knit 4 loops to the 4th red thread, a connecting loop, we turn the knitting.

9 row- do not knit up to the 5th red thread of the 4th loop, connecting loop, turn the knitting (photo 7).

10 row- we knit to the end of the visor with single crochets. We knit the last two loops together.

11 row- 2 connecting loops, then to the end of the visor with single crochets, we knit the last two loops together (photo 8).

We decorate the cap (photo 9) and a blue button.

We knit a button in the same way as we crocheted in the previous master class.

Everything, our cap with a visor for the boy is ready!

Videos crochet cap

For more details on the whole process of crocheting a baby cap for a boy, see the video master class.

In the first part, we knit the cap itself and start knitting the visor:

Part 1

In the second part, we knit a visor for our cap and decorate it with additional elements:

Part 2

The summer months bring joy to both adults and children. You can spend whole days outside, blissful under the warm sun. But the influence of the daytime heavenly body is not always useful, so mothers begin to think about how to cover the baby's head. A long stay under the rays threatens with undesirable consequences - from deterioration of health to sunstroke. A cap for a boy with a hook for the summer, knitted by a caring mother, will save the baby from the troubles of summer days.

The headdress is knitted easily and simply, even a novice craftswoman will cope with it. You can knit several caps - for each outfit.

We knit a simple cap for a boy with a crochet for the summer with our own hands

Not everyone is ready to watch knitting videos, preferring a verbal description of the model to them. The scheme to the description will make it clear.

Consider how to knit the simplest cap for a boy.

First of all, you should dwell on the yarn. The best yarn is cotton. Products made of natural material pass air well, the child will not be hot in them.

1) To begin with, a chain of air loops is dialed. Then it closes in a ring, and the product continues to be knitted from top to bottom.

2) In the first row, three loops are additionally recruited for lifting. Then the row is knitted with double crochets. The hook is inserted into the center of the ring of air loops. The row ends with a connecting column.

3) Subsequently, the product is knitted according to the pattern. Rows 12-19 are done in the same way.

4) The next 20th row consists of double crochets, each of which is performed on a double crochet and air loop of the previous row.

5) In the 21st and 22nd rows, the product is processed around the perimeter with single crochets.

6) To make a tie, 32 air loops are recruited in the 23rd row. Loops 31 and 32 are lifting loops. On the remaining 30 loops, a row of single crochets is knitted. Then, continuing to knit in a circle, not reaching the end of the row of 15 loops, the second tie is knitted. Having made the last single crochet for the tie, a connecting column is made in the loop of the 22nd row. The base for the cap is ready!

7) The visor is made separately from the cap, then it is attached to it with the help of posts.

Knitting begins with a set of 27 air loops. On the presented diagram, the notation is adopted: single crochet columns are shown with crosses, ticks with a cross are increments. An increase means knitting two columns into one loop of the base. To achieve rigidity of the visor, you can add a thin fishing line to the thread.

"Marine" theme becomes the most relevant in the summer. So why not knit a cap for a boy in a marine style.

Unlike the previous model, this product will require yarn in two colors, these can be standard blue and white. But no one forbids the use of others.

1) The headpiece is knitted from above. The beginning is standard - a chain of air loops (5 pcs.), Closed into a ring with a connecting loop.

2) The next rows are worked in single crochets in a circle. To add, you should make an increase in each loop, that is, knit two single crochets from one loop of the previous row. In order for the top of the cap to be flat and not bent, the addition of loops is carried out according to the rule:

in the 1st and 2nd rows, an increase is made in each loop;
in the 3rd row, an increase every three loops;
in the 4th row, an increase every four loops;
starting from the 5th row, the increase is done in random order.

Loops are added until a circle with a diameter of 17 cm is knitted (for a boy 4–5 years old).

In order for the cap to match the marine theme, you need to alternate rows: 2 rows of blue yarn, 2 - white. The last loop of a row of each color is a connecting column, the beginning of a row of a new color is an air loop.

3) To knit the side walls of the base of the cap, the loops are reduced. To reduce the number of loops in a row, you need to skip one of the loops of the previous row, that is, just do not knit it. It is enough to reduce one loop in each row. Rows also continue to be done with single crochet "sea stripes". You need to finish the cap with yarn of the same color, knitting it 5-6 rows.

4) The visor will immediately be attached to the base. Having determined the loop corresponding to the middle of the cap, 10 loops recede from it to the right. From this point continue to knit as follows: 4 single crochet, 4 half crochet, 4 single crochet, 4 half crochet, 4 single crochet, connecting loop.

5) The second row of the visor is performed with single crochets, at the end - a connecting column.

6) The next 3rd row is knitted similarly to the 1st (see paragraph 4), and the subsequent ones are similar to the 2nd (see paragraph 5).

7) The final stage is the decoration of the cap. For this, a strip of white yarn and a “steering wheel” are knitted. Decorative elements are sewn to the finished cap

Let's analyze the main options for decorating a cap with applications

To make a cap for a boy more elegant, it is decorated with appliqués or decorative buttons.

Video on the topic of the article

The headdress is knitted easily and simply, even a novice craftswoman will cope with it. You can knit several caps - for each outfit.

We knit a simple cap for a boy with a crochet for the summer with our own hands

Not everyone is ready to watch knitting videos, preferring a verbal description of the model to them. The scheme to the description will make it clear.

Consider how to knit the simplest cap for a boy.

First of all, you should dwell on the yarn. The best yarn is cotton. Products made of natural material pass air well, the child will not be hot in them.

1) To begin with, a chain of air loops is dialed. Then it closes in a ring, and the product continues to be knitted from top to bottom.

3) Subsequently, the product is knitted according to the pattern. Rows 12-19 are done in the same way.

4) The next 20th row consists of double crochets, each of which is performed on a double crochet and air loop of the previous row.

5) In the 21st and 22nd rows, the product is processed around the perimeter with single crochets.

7) The visor is made separately from the cap, then it is attached to it with the help of posts.

"Marine" theme becomes the most relevant in the summer. So why not knit a cap for a boy in a marine style.

Unlike the previous model, this product will require yarn in two colors, these can be standard blue and white. But no one forbids the use of others.

1) The headpiece is knitted from above. The beginning is standard - a chain of air loops (5 pcs.), Closed into a ring with a connecting loop.

in the 1st and 2nd rows, an increase is made in each loop;
in the 3rd row, an increase every three loops;
in the 4th row, an increase every four loops;
starting from the 5th row, the increase is done in random order.

Loops are added until a circle with a diameter of 17 cm is knitted (for a boy 4–5 years old).

5) The second row of the visor is performed with single crochets, at the end - a connecting column.

6) The next 3rd row is knitted similarly to the 1st (see paragraph 4), and the subsequent ones are similar to the 2nd (see paragraph 5).

7) The final stage is the decoration of the cap. For this, a strip of white yarn and a “steering wheel” are knitted. Decorative elements are sewn to the finished cap

Let's analyze the main options for decorating a cap with applications

To make a cap for a boy more elegant, it is decorated with appliqués or decorative buttons.