How to make a gas mask out of paper. How to make a paper mask with your own hands using templates? Paper respirator

how to make a chemical protection suit??? and a gas mask??? and got the best answer

Answer from Ya molokholnaya)))[guru]
Well, you don’t need a suit, but you do need a gas mask. The easiest thing is to buy a gas mask at a store that specializes in selling protective equipment. If you want a protective suit, go to sporting goods, there are stockings and raincoats.

Answer from 2 answers[guru]

Hello! Here is a selection of topics with answers to your question: how to make a chemical protection suit??? and a gas mask???

Answer from BALBERIT PARK[guru]
You cut a suit (in two copies) from dense polyethylene with a hood, like a welding uniform. You make the same patterns from low-quality (soft) plaster mesh. You heat the iron and glue together the duplicated elements, placing one in another and a mesh between them. To prevent sticking to the iron, we use paper, it will stick, but will come off over time. When putting on, seal with tape.
A homemade gas mask is built into such a system by building in an elementary lightweight paronite (or something similar in mechanical properties) frame for the outlets for the hose and a frame for the viewing window made of plexiglass (can be bent if necessary by dipping in boiling water) - weld everything to a wide hood or make separate "helmet-mask". Shoe covers are made according to the same principle. Gloves are not too thick rubber (in hardware stores for cleaning toilets), sealed on the wrists with the same tape.
You can make a filter for a gas mask yourself by fiddling with activated carbon and selecting sorbents. You can even have a tank with a decontamination solution so that the inhaled air passes through the liquid, you just need to know which specific chemicals to protect yourself from. Carefully remove the inlet and outlet valves from paint respirators. Everything is made in a couple of days maximum. The equipment is tested in a densely smoky room and briefly immersed in water.
The same option with impregnation of tarpaulin fabric with dissolved rubber, but more expensive and longer, although more durable, more aesthetically pleasing and stronger. With such equipment you can even clear rubble in a dangerous zone;)

At any costume ball or New Year's celebration, it is customary to wear masquerade masks in addition to the carnival costume of a fairy-tale character. They come in different types: made of paper, fabric, durable, made of papier-mâché, plastic, etc. Depending on the chosen role, masks may have additional decorative elements - feathers, animal ears, mustaches, sparkles and rhinestones, fabric inserts, flounces and lace. The color of the masks should match the character's appearance.

In the article we will focus the readers' attention on how to make a paper mask with your own hands, how to correctly draw a template for a craft, and what additional details will be needed to complete the image.

How to prepare a template?

For the mask to be comfortable, the eye holes must be in the correct position. If you are making a mask for your child for a matinee in kindergarten or a New Year's party at school, then you need to know the principles of its manufacture. Before drawing the template, you need to take measurements of the child's face. The distance from the center of one eye to the center of the other in a straight line is measured. Then you need to measure the distance from the left temple to the right.

The dimensions are transferred to thick paper. Next they begin to draw the mask itself. The central lower edge of the craft should not be lower than the tip of the nose. This advice only applies to a standard masquerade mask that covers the eyes, as in the photo of the template in the article. The side edges of the craft can be different - rounded, square, tapered with sharp corners.

Holes for the eyes are also made in various ways. If this is an animal being drawn, then the eyes can be made round; they are often made slanting and beautifully arched. At the ends of the mask, holes are made with an awl for elastic or ties to make it more convenient to wear the product at a celebration. There are masks that are worn in the hand and are placed on a thin stick on one side. But this option is more suitable for an adult party; it is not recommended to make such a mask for a child.

Decorating the mask

You already understand how to make a paper mask with your own hands. But it’s not enough to just draw it and cut it out with an elastic band. You also need to show the skill of an artist and decorate the product with taste, painting the mask with paints. It is best to use gouache paints, but in order to prevent the child from getting his hands and the rest of the costume dirty, you need to subsequently open it with varnish.

The already varnished surface is covered with additional elements - beads, tinsel or pebbles and rhinestones. Consider decorating the mask to match the gender of the child. Decorations on a boy's mask should not contain hearts or flowers. It is enough to attach a shiny edging around the perimeter of the craft or add Christmas tinsel.

How to make a papier-mâché template?

Now let’s look at how to make a paper mask with your own hands in the form of papier-mâché. Many craftsmen are familiar with this technique of pasting a template layer-by-layer with pieces of newspaper or other paper. A natural paste made from flour is used. But how can you create a template if you don’t have an empty plate or jug and your child’s face in front of you. You just need to follow some rules and everything will go great. First, you need to explain to your baby that his mask will be the most original and comfortable, since the measurements will exactly match his facial features. Secondly, be sure to lubricate the pasting areas with glycerin or baby cream so that the flour paste does not stick to the child’s skin and cause discomfort.

Thirdly, be careful when pasting paper over your face: the eyes and nose should remain open, and the paste should in no case be liquid and flow from the forehead onto the eyes. You need to remove excess moisture with a napkin. During drying, and at least the bottom layer must dry so that the template can be removed from the face without damaging the shape, you need to play with the child, keep him busy, read a book, or, as a last resort, sit him in a comfortable position and turn on a cartoon. Then be sure to thank your child for his patience with something tasty and loved.

Paper mask according to template

After drying, the mask is removed from the child’s face. The skin must be washed thoroughly. Then, on the dried papier-mâché template, you can additionally glue the missing layers or details, for example, create ears or a long beak, depending on the character’s appearance.

When the papier-mâché has completely dried, and this process can take quite a lot of time - from 3 to 5 days, the mask must be carefully trimmed, giving it the correct shape. Then start coloring the background and drawing out the small features of the character.

Paper animal mask

If you decide to make a mask for a holiday in the image of an animal, then other drawn elements are added to the standard form of the craft, made according to the child’s measurements. These can be ears of the appropriate shape, the shape of fur, horns, etc.

You can immediately draw a nose, stripes on the body, spots on the fur on the template with a simple pencil, and then simply paint over them. If you don’t know how to draw, don’t be upset, because the World Wide Web will always help. All you have to do is give a request and print out the coloring page of the given animal. All that remains is to redraw the contours or reglaze the image onto the template.

How to color a mask?

It’s clear how to make a paper mask with your own hands, let’s look at the samples in the photo below to see how the characters can be painted. Wax crayons were used instead of gouache. The image is also bright and colorful.

In this way, you can clearly draw the fur of an animal, every feather of a bird, and such drawings do not need to be opened with varnish, because they will not stain your hands anyway.

Favorite hero

Many boys, and even girls, at the holiday want to play the role of their favorite cartoon and film character - Spider-Man. Such a mask should be red and have a web drawn on it.

A Spider-Man mask made of paper is made according to a template, only its edges rise in a smooth upward curve. When painting, the narrowed cutouts of the eyes are outlined first with white and then with black edging. On the rest of the mask, web cells are drawn on a red background with a black marker. You can make a blue mask for a boy.

As you can see from the article, it’s not difficult to make your own mask for a child or yourself for a holiday. So don’t worry, and feel free to get to work, you will definitely succeed.

A respirator is a means of personal protection of the respiratory organs, and therefore is simply necessary when working in conditions of severe air pollution, which can be caused by a high concentration of dust, smoke or aerosols.

What you will need to make your own respirator

Often, a protective mask is also needed in everyday life, for example, when repairing an apartment or car. At the same time, there is no need to buy it, since a basic respirator is easy to make on your own. For this you will need:

scissors and glue for plastic;
polyethylene bottle with nylon cap;
a pair of 10 cc disposable syringes;
cotton wool, fabric tapes and elastic tubes (for example, from a dropper).

Making a respirator with your own hands (algorithm)

Having prepared everything you need, you can begin making a respirator. The order of work in this case is as follows.

We cut off the top of the plastic bottle in a circle. The latter must be selected depending on the structure of the face and anatomical features of the person so that in the end the mask fits without gaps.
In the cut area with scissors, we make a recess for the bridge of the nose (the top of the respirator), and on the sides, in the middle part, there are two holes with a diameter of 5-7 millimeters, which will serve for air intake.
Next, we sand the sharp edges of the plastic mask, then apply glue to them and glue the cut rubber tube from the dropper so that the respirator does not scratch the face and fits more tightly.
Remove the cover and make two triangular holes in it. They should be positioned opposite each other, and one of the corners of each triangle should be directed towards the center of the lid.
Apply glue to the lid between the triangular holes and glue a circle of cellophane to it, the diameter of which is equal to two centimeters. As a result, we get a return valve.
We make valves for air flow inside the mask from syringes. To do this, remove the piston and cut off the wall with the needle mount, after which we glue the resulting cylinders to the bottle, aligning them with the side holes made in advance.
After the glue has dried on all seams and joints, screw the cap onto the neck of the former bottle, and fill the syringe cylinders with cotton wool, which has previously been crushed.
Finally, we glue textile tapes or straps to the edges of the mask, with which the respirator will be held on the head.

A respirator of this design can easily cope with dust arising during repairs. If you need to protect yourself from smog, gases or toxic fumes, you need to add crushed activated carbon to the filter fillers (cotton wool in syringe cylinders). For one time, it is enough to use two tablets, crushed into powder.

Any holiday event for children will be much more exciting if it is costumed. New Year, a themed party in kindergarten or a birthday, costumes of fairy-tale and cartoon characters will add a little magic and mystery, delighting not only children, but also parents.

You can purchase masks for any holiday, but it is much more interesting to make a mask with your own hands. The most accessible materials are paper and cardboard. What else you will need for work, how to make and decorate a mask for the holiday - later in the article.

Mask ideas for holidays and events

New Year can rightfully be called the most favorite children's holiday. Waiting for New Year's miracles, gifts from Santa Claus under the tree and, of course, the celebration itself. The New Year's carnival involves the presence of a fancy dress and mask.

The best ideas for children's masks for the New Year are considered to be:

Animals:

Characters from Russian fairy tales:

Baba Yaga;
Dragon;
Ivan Tsarevich;
Koschei the Deathless,
Princess Frog

Heroes from domestic animated films:

Snowman;
Snow Maiden,
Snowflake;
the wolf and the hare from “Well, wait a minute!”;
cat Leopold and mice.

Characters from foreign animated films:

Snow White;
The Snow Queen;
Mickey Mouse;
Goofy the Dog;
Santa Claus.

Marvel Studios Super Heroes:

The Halloween holiday, which came to Russia from Western culture at the end of the last century, was immediately loved by children and teenagers.

Ideas for this holiday could be:

Mr/Miss Pumpkin;
Dracula;
scull;
bat;
small witch;
Frankenstein;
casting;
sad harlequin;
evil clown.

For a themed birthday party, ideas can be drawn from fairy tales, popular cartoons, and children's films:

Spongebob;
Winnie the Pooh;
Shrek;
Elsa;
Smeshariki.

Tools and materials for making masks

A paper mask can be easily made with your own hands.

For production you need:

This is the minimum set for work. Depending on how complex the mask is, you may need additional tools and materials for decoration.

Ways to decorate masks

Masks made of paper and cardboard can be simple or complex. The better the idea and quality of workmanship, the more interesting the main item of clothing for the child will seem. Even the simplest head mask can be turned into a work of art. What will you need for this?

Materials for decorating masks:

You can use any paints for decoration. It can be gouache, watercolor, or acrylic. Acrylic paints have a bright and rich palette of colors. For decoration, you can purchase special acrylic products that can be used to add volume - contour paints, liquid glass.

Can be used for decoration with craquelure varnish and acrylic paints. Craquelure, when applied to paint, creates cracks, covering the surface with intricate patterns. The decoupage technique allows you to decorate with various floral or abstract designs.

Gouache is a quick-drying paint with a bright palette, perfect for decorating white paper or cardboard from which the mask is made.

Wolf Mask: Making Master Class

To work you will need:

Step-by-step production:

You should practice first to draw a wolf's face. The volume of the mask will be given by details made of colored paper and a special cut of the mask.
Measure the circumference of the child's head. The width of the mask should be one third of the circumference.
On gray cardboard draw the outlines of the mask- nose and cheeks. Draw holes for the eyes. The height of the mask can be half the face or completely cover it.
For added volume make cuts from the middle of the eye to the edge of the mask.
Cut out the ears separately. They must have allowances at the bottom for gluing to the mask. Bend over the allowances and make cuts on them so that it is convenient to glue to the base. Make cuts in the middle of the ears and glue their edges together so that the ears become voluminous and turned inward.
Made from black paper cut out the top of the head and the edge of the ears. Glue the parts.
Cut the ribbon in half. On the sides of the mask, strengthen the place where the tape is attached with pieces of kraton. After making holes, thread the tape through them, leaving short ends on the front of the mask.
Cut from white paper lower part of the wolf's muzzle– eyes and cheeks, glue the details onto the base. At the same time, this part of the mask will cover the ribbons for the ties.
From gray paper cut out thin circles and cover the cutouts for the eyes with them.
Made from brown paper cut out the nose and stick it on. The wolf mask is ready.

Bunny mask – 3D cardboard mask

To work you will need:

Process of creation:

Make a one-piece mask template with ears on paper. Two parallel fold lines will run from the tips of the nose to the top edge of the cheeks. Make darts on the sides of the cheeks - from the nose to the edges with allowances for gluing. Cut holes for eyes and strings.
Attach the template to the cardboard, securing it with tape, outline, draw dotted lines for folds.
Remove the pattern and cut a mask from cardboard. Draw the fold lines with pressure. Do this in such a way as not to damage the cardboard and make it easier to bend the material in the right places. Cut out eyes and holes for ties.
Cut out the mask. Bend the mask along the line of the nose and along the grooves. Glue the grooves. Leave the glue to dry. To ensure the strength of the gluing area, it does not come apart.
After the glue has dried, the mask can be decorated. Cut out inner ears, eye rims and cheeks from white paper, and glue the parts. Draw dots on the cheeks to imitate a mustache.
Thread elastic tape through holes, tie a knot on the reverse side to keep the ribbon in place.

Dimensions for mask:

Height – 20 cm
Top edge width - 10 cm
Mask width - 20 cm
The height of the ears is 10 cm, the width of the base of the ear is 3-4 cm.
The depth of the grooves is 9 cm, the width of the grooves is 5 cm.

Bear mask: Making master class

A quick way to make such a mask out of paper with your own hands, cutting out a total of 6 circles.

For this you will need:

Step-by-step production:

On the cardboard, draw a circle with a diameter of 16-20 cm - the basis of the mask.
Draw and cut out circles from colored paper. From brown paper a head, 16-20 cm in diameter, and 2 circles for the ears, 4-5 cm in diameter. From yellow/orange paper, a muzzle, 6-7 cm in diameter and 2 circles for the inner ears, 3-4 cm in diameter. Glue on the parts on cardboard. Cut out a nose from black paper. Draw a mouth on a muzzle made of light paper.
Glue the ears together - place a circle of light paper in the middle of the brown circle. Attach them to the head so that they peek half over the edge.
Cut out holes for the eyes.
Attach an elastic band. You can make holes and secure the tape with knots, or you can attach it to the mask using a stapler.

Horse mask

To make it, you can use regular cardboard, which you can then decorate with gouache. Then you only need to cut out the base and ears. For decoration, use foam rubber, adding eyebrows and a voluminous nose to the bear.

To make a horse head mask you will need:

Manufacturing:

Use cardboard to make a frame for a head mask in the shape of a hat. To do this, cut a ribbon 3-4 cm wide from cardboard, with a length equal to the circumference of the child’s head. You will also need 4 strips, a length equal to half the volume of the head.
Fasten the long strip with a stapler in the shape of a rim. Two short strips are fastened crosswise and attached to the rim, creating a frame. From the other two strips, make an oval frame for the horse's muzzle and attach it to the base.
For the horse's neck, cut out a rectangle from cardboard 5-6 cm high, with a length equal to half the circumference of the head. Secure the paper with a stapler to the back of the rim.
Cover the mask with colored paper, crumpling it a little for convenience. Make holes for the eyes. Secure the paper with glue or a stapler. From white paper, cut a strip along the length from the horse’s nose to the withers, and glue it.
Cut out the ears from brown paper, leaving allowances for gluing to the head - 4 parts. Glue them together with the wrong side, attach them to the top of the head.
Cut thin strips of brown paper 5-6 cm long and 1 cm wide. This will be the mane. Using scissors, twist the ends of the strips, stick from the top of the head to the bottom of the neck and make bangs.
Cut out semicircles for the horse's eyes and nose from black paper and glue them on. The mask is ready.

Baba Yaga mask (papier-mâché)

An evil character from their Russian fairy tales with a hooked nose, how to make this mask more like the original?

For this you will need:

Step by step process:

First you need to make Baba Yaga's face. To do this, take a plastic mask, newspaper for pasting, PVA glue, and water.
Lay out the first layer on the mask with paper soaked in water, without glue. This is to easily remove the resulting mask. Next, you should glue several layers (3-4 layers) of paper soaked in glue. Leave the mask to dry for several hours.
Make the nose and chin of Baba Yaga. To do this, make a nose with a hook from plasticine, like a mask, cover it with paper and glue, and also leave it to dry. After drying, cut the nose in half and take out the plasticine. Glue the nose to the face with pieces of paper. Make a chin out of plasticine and also make a piece out of paper. Wait until completely dry.
In the mask, cut holes for the eyes, or for the mouth, holes in the nose for breathing. Collect the mask. The nose and chin are attached to the mask with pieces of paper soaked in glue.
To make eyebrows, twist twigs out of paper, soak them in glue and attach to your face. Make holes along the edges of the mask for ties. Thread the ribbon from the inside out, tie knots inside.
Decorate the finished mask.

Fish mask

It is best to make such a paper mask with your own hands in the form of a crown-hoop on your head.

For this you will need:

Work process:

Draw a fish, color it and cut it out.
Make a hoop out of paper around the circumference of your head.
Glue the fish in the middle of the hoop.

You can decorate the fish with feathers and foil.

Another way to make a fish mask:

Draw an oval according to the shape of the face on white paper. Color it like Nemo the fish, alternating white and orange stripes with thin stripes of black.
Make holes for the eyes and draw the mouth of the fish.
Glue fins to the top and sides and make them yellow.
To attach the mask, make a hoop out of paper and glue it to the mask.

Bird mask

To work you will need:

Step-by-step production:

Fold a sheet of thick paper in half and draw a mask in the form of large glasses. Draw the eyes and make a recess for the beak. This part of the mask will be attached to the base separately.
Cut out the mask and slits for the eyes.
Make a beak. To do this, measure the distance from the bridge of the nose to the bottom of the mask - this is the width of the beak. Bend the cardboard in half, measure the resulting length from the fold and draw a line from the top to the fold. The result will be a triangle with equal sides. If desired, the beak can be made long or short, slightly curved at the edges. Leave an allowance of 1-1.5 cm at the base of the beak for gluing it to the mask.
Cut the allowance on the beak in several places and bend the cardboard. Cover the beak with yellow paper. Using the allowances, glue the part to the mask.
Try on the rubber band, cut it to the desired length and secure it with a stapler.
Mask decor. To do this, you will need to cut feathers from colored paper. Feathers can be leaf and crescent shaped. Fold the leaf-shaped parts in half to make them more voluminous. Glue the feathers onto the mask with an overlap. Feathers may extend beyond the mask at the edges.
For the eyes, cut out circles to carefully decorate the cutout and glue on. The mask is ready.
To decorate such a mask, you can use natural feathers, braid to decorate the eyes, rhinestones and beads.

Goat mask

For such a mask you need very little:

Step-by-step implementation of the mask:

Draw a mask according to the size of the face, shaped like an inverted pear. On the top of the mask, make two cuts 2 cm deep. Cut out holes for the eyes.
At the bottom of the mask, draw the nose of the goat, making cuts.
Glue the cuts at the bottom and top to add volume to the mask.
Cut out the horns and ears, glue them on, and make holes for the ties.
Thread the ribbons through the holes and secure them with a knot on the reverse side.

If desired, the mask can be decorated or covered with colored paper.

Mask – frog

Materials and tools for the frog mask:

Mask making process:

Cut an oval out of cardboard, shaped like a melon. The height of the mask is 15 -17 cm, the width is half the volume of the head.
Make two grooves. To do this, draw a line in the middle on the mask. The upper recess from the frog's nose to the edge, approximately 7 cm long, 1.5-2 cm wide, leave allowances for gluing. The lower recess is 1-1.5 cm high and 1 cm wide in the middle of the chin. Draw and cut out holes for the eyes, a mouth for a smile, holes imitating a nose.
Glue the grooves.
Cover the mask with paper, draw out the details - nose, eyes, eyebrows.
Secure the mask to the hoop using superglue. For strength, you can cut strips of paper that you can use to glue the hoop to the mask. The hoop will hold the mask well on the forehead and will prevent it from bending too much and losing its shape, as when using ties.

When making a mask for a girl or a frog princess mask for decoration, you can use:

foil, yellow paper;
rhinestones or beads.

Make a small crown out of yellow paper, decorate it with pieces of foil and the bottom with beads. You can add red lips.

Spiderman mask

To work you will need:

Making a mask:

From red cardboard, cut out an oval according to the shape of the face plus 3-4 cm allowance along the edge of the oval. Make slits for the eyes and holes for the nose. Even though Spider-Man doesn't have a nose, he still has to breathe somehow.
Cut out a triangle from white paper - the spider's eyes, stick them on and use a black felt-tip pen to outline the eyes, not forgetting to cut out circles for the eyes. Draw a spider pattern on the mask with a black felt-tip pen.
To make the mask voluminous, make cuts on the mask. Two at the top, approximately from the eyebrow line to the edge of the mask, and two on the chin. Glue the edges of the cuts.
Secure the elastic band to the edges of the mask using a stapler. The super hero mask is ready.

iron man mask

All the boys are crazy about this steel hero. This carnival costume and mask is an excellent solution for any costume party.

To create a paper mask with your own hands, you will need the following materials and tools:

Performance:

Draw the outline of the mask on red cardboard and cut out the shape.
Make 2 pieces of ears out of cardboard and glue them to the mask.
Place the mask on yellow paper and trace it with a pencil. Draw the yellow parts of the mask inside the outline. Cut out.
Glue the yellow part onto the red one.
Draw the eyes and mouth of the iron man with a pencil. Make holes for the eyes.
Using a marker, draw the details of the head, outline the eyes and mouth.
Glue the tape to the back of the mask.

Scroll:

If a child takes part in a production and will need to sing or read poetry, then it is best to make a mask on the upper part of the face or 2/3 of the face, leaving the mouth uncovered.
To quickly make a mask, you can use a template or a ready-made pattern. You just need to print out the pattern, transfer it to cardboard or thick paper, glue it and decorate it.
It is best to use acrylic paints for painting masks. They dry quickly, do not fade over time and do not get dirty. This mask can be used more than once. Gouache is also suitable for these purposes, but this paint gets dirty when exposed to moisture.
You can not only glue decorations and decor onto masks made of cardboard or paper, but also sew them on and glue them with hot glue.

Making any paper mask with your own hands is quite simple. To do this you need a little imagination, simple materials and desire. Children take part in such master classes with great pleasure, contributing their ideas to the creation of masks for the holiday and inspiring adults to create small objects of art for the child.

Video: DIY paper mask

How to make a raccoon mask from cardboard, watch the video:

DIY New Year's masks in the video:

This is not just a paper respirator, this is a flight of imagination from the author Alexander Stepanchikov, who created a 3D model of a post-apocalyptic character, using Scorpion from Mortal Kombat as a prototype. The result was a kind of radioactive scorpion. Well then, good man Necrosster I took it and created a 3D model based on this image. The result was a designer respirator. Unwrapped it sarutobi obito .

The paper respirator model is incredibly simple - only two pages in pepakura, but, nevertheless, it looks great. The dimensions are standardized and it is quite easy to assemble. I think it could serve as an excellent replacement for the Noob Saibot mask.

We are glad to present you the second version of the respirator, which I edited (modified) Vladislav Verkhoturov. This respirator layout also takes up two pages in pepakura, the dimensions are the same as the original. It's quite easy to assemble.

Respirator-progenitor edited by Necrosster"a caused a great resonance among the masses, and therefore we are pleased to present a couple more developments on this topic, for which, by the way, we must thank comrade Vladislav Verkhoturov.

The third design of the respirator has some similarities with previous models, but there are significant design changes. It takes up two pages in pepakura and looks very interesting.

Make a respirator with your own hands -

The fourth version of the paper respirator already has an independent, radically new design. It looks modern and technologically advanced (so to speak). Occupies the same 2 pages. There are jewelry moments.