Pattern of a baby hat with knitting needles for newborns. Children's hat with ruffles on knitting needles. Description of knitting a comfortable cap

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

The birth of a baby in a family is a great joy. The mother wants to envelop the child from the moment of birth with universal care and love. What could be better than knitting a hat for your baby with your own hands, which will warm him in the cold and decorate him? After all, the things in which the mother’s soul is invested are a kind of amulet and protection for the baby.

How to knit a hat for a newborn with knitting needles

If you don't have the slightest experience in knitting, don't despair. This type of needlework is easy to master. Try making a simple hat model. Knitting for newborns is a fun activity that can become an exciting hobby and even generate income. There are many models of knitted hats for newborns, but it is better to take those that:

fit tightly to the head;
do not contain seams;
have ties.

Before you begin, you should determine the size of the baby's head. If you are just planning the birth of a toddler, then you need to cast on a series of loops with an average length of thirty-four to thirty-seven centimeters. Always give preference only to soft yarn so that it is gentle to the touch and does not cause itching or irritation on the child’s sensitive skin. The thread should not be excessively thick, so take 250-300 m yarn, and choose a tool size 2.5-4. We present the most popular knitted baby hats with descriptions for newborns.

Classic model with ties

A simple knitted hat will look very neat on your little one's head. To make it you should take:

delicate yarn from a combination of down and wool - 50 g;
knitting needles No. 3 and 2.5 - for knitting elastic;
beads for decoration - optional.

Knitted hats for newborns are easy to make with knitting needles:

Let's start with the elastic band. We take the number of loops so that it matches the circumference of the head, which is 34-38 cm.
We knit four centimeters alternating the wrong side and the right side. You should end up with a rectangular segment.
Next we alternate rows with purl and knit stitches. We do five or six centimeters.
Then we reduce each row, which is connected with facial loops, by six loops, one from the next sixth part.
The last six loops should be knitted and the thread secured.
Make ties from the three remaining loops.

Hat for a newborn boy with ears

Ushanka hats are relevant not only in the fashion of adults, but also of children. The product is practical, comfortable and warm. You can decorate it to your taste: for example, trim the edges with fur. Knitted hats for newborns are made with knitting needles if you have:

yarn – 50 g;
straight and circular knitting needles No. 2.

The knitting pattern is not complicated, but you should start not with the main part, but with the ears, which need to be done in a scarf pattern. The first step is to cast on four loops, and then knit sixteen rows, making symmetry increases on each side:

We knit the second and fourth row by adding one loop on each side.
Sixth row: we throw on a couple of pieces on both sides.
Eighth row - three loops each.
The fifteenth and sixteenth rows - we return to one loop on both sides.
We transfer one eye of twenty-two loops to a circular knitting needle model, add another eleven loops.
We proceed to the second eyelet, which we do in exactly the same way with a set of twenty-five loops.
We knit thirty rows in satin stitch. To get a crown, remove stitches only in even-numbered rows.
We divide the total number into five zones: you need to subtract one from each, for one row you get minus ten loops.
If there are six loops left, then we already decrease every other row.
Tighten the thread through the loops that remain. Knitted hat for a newborn with knitting needles is ready for use.

Knitted openwork hat for a newborn girl

Mothers choose hats for girls with special passion. I want the baby to look like a doll right from the cradle. A hat for a newborn girl, knitted in openwork weaving, will decorate a little princess. For work you will need the following materials:

Mixed yarn. Medium-thick acrylic and cotton threads are ideal. You should take a skein of 50 g with a length of 160 m.
Circular knitting needles No. 3.

The knitting pattern may seem impossibly complicated at first glance, but this is not at all true if you do everything step by step:

We string 57 loops, which will be about 28 cm, and then knit 12 rows for the lapel with the “Boucle” pattern.
Then we apply the “Lacy Diamonds” pattern at 7.5 cm. The length at the distance from the first row should be 11 cm.
We divide the entire quantity in the canvas into three equal zones of 19 pieces each.
We knit the bottom according to the principle of decreasing loops, as in the pattern for the heel of the sock. The central ones are made with an even “diamond” pattern, and the outer ones are worked with knitting on both sides, capturing one loop each in the first and third parts.
We bend the lapel to the wrong side. The ties will be 55 loops high. We make 15 loops from the selected half, where the “Rhombus” pattern is, after 10 will be on the bottom, and the last fifteen will be on the other side of the product. At the end, don’t forget to knit another 55 loops for ties on the other side.
We make a couple of rows with the Boucle pattern, close the loops, and cut off the thread.

Knitted cap for a newborn with a description

A similar hat is perfect for a girl or a boy, the main thing is to decide on the color. Before starting work you should acquire:

Using straight or circular knitting needles No. 1, 5 and No. 2. It is advisable to knit the product using two pairs of knitting needles of different markings. Stocking tools are suitable for elastic to make it look neater.
Yarn - about 50 g.

Remember that the knitting density should be 28 loops for every ten centimeters. Next, it is recommended to use the knitting instructions:

We cast on 75 loops on needles marked No. 1, 5. As a result, the circumference is 27 cm.
We knit with an elastic band, knit and purl, 2 cm each.
Using knitting needles No. 2 we knit the fabric in stockinette stitch (length 8 cm).
To knit the bottom of the product, we divide all the finished loops into three identical zones and knit them like a heel for a sock. We make the central part with a grip in each row along the loop from the outer sections.
If the bottom is knitted to half, then on both sides we gradually begin to reduce its width. By the end of knitting it should be equal to three centimeters.
We knit the elastic with knitting needles No. 1.5. From the bottom section we knit stitches for the neck: 2.5 cm with an elastic band for one front and one purl. We close and make ties.

Video: how to knit a hat for a newborn

Instructions for knitting hats for newborns can be found in the videos below. Visual examples make it possible to fully understand the needlework process and understand how to knit a hat for a newborn boy, and what model to choose for a girl. From different options for hats, you will choose a suitable accessory for your baby that will warm him in the cold and serve as a real decoration.

A warm hat for a newborn baby is knitted quickly and quite simply. Using the description of knitting, even a beginner knitter can “master” a hat. When knitting, it is very important to choose the right yarn. It is better to use natural cotton threads, and for a warm cap - woolen threads. Merino wool is very suitable - it makes soft, scratch-free children's caps. Before you start knitting, you need to determine the required number of loops. To do this, you need to knit a sample from the selected yarn and count how many loops and rows there are in 1 cm of knitted fabric.

Approximate table of children's sizes:

For everyday wear for a newborn, it is better to choose caps of a simple style, with a minimum of bows, frills, ruffles, etc. These decorations can disturb the baby.Hats with ears are more suitable for winter.

Knitting a cap for babies with description and patterns

This hat is suitable for both boys and girls - it all depends on the choice of thread color. To work you will need:

∗ straight or circular knitting needles (optional, whichever is more convenient for you) No. 1, 5 and No. 2. Thinner knitting needles are for knitting elastic, so it will look neater;

∗ yarn – approximately 50g.

Knitting density is approximately 28 loops per 10 cm.

We cast on 75 stitches on knitting needles No. 1, 5 - this is for a face circumference of 27 cm. We knit with an elastic band of 1 x 1 purl . two cm, then move to sp. No. 2 and knit with stockinette stitch 8 cm. To knit the bottom, divide all the loops into three equal parts and knit like the heel of a sock, knitting the central part with a grip in each row, one loop from the outer parts.

When the bottom is knitted halfway, you need to evenly reduce its width on both sides so that by the end of knitting it is equal to 3 cm. To knit the elastic band, go to sp. No. 1.5. We collect loops for the neck on both sides from the bottom edge and knit 2.5 cm with an elastic band of 1x1p. Let's close. We make ties.

Openwork cap for a newborn girl with description

To work you will need:

∗ yarn, better mixed composition - acrylic and cotton, average thickness -50g with a length of 160m;

∗ circular needles No. 3.

Description of the bouclé pattern

1 rub. – knit 1, purl 1;

2 r. and all even ones - according to a visible pattern;

3 r. – over knit – purl, over inside out – facial;

5 rub. - repeat from 1 p.

Description of the pattern “Lacy diamonds”

The number of loops should be divisible by 6 plus 7, plus two edge loops. Scheme:

Cap for a girl with description

Cast on 57 stitches with knitting needles - approximately 28 cm and knit 12p for the lapel. Boucle pattern.

Then knit 7.5 cm using the “Lacy Diamonds” pattern. The length from the first row is 11 cm.

We divide the total number of loops into three equal parts of 19 sts. Next, you need to knit the bottom as in the previous model - according to the principle of decreasing loops for the heel of the sock: central 19 sts - evenly, with a diamond pattern, outer loops on both sides we knit grabbing one loop each from the first and third parts of knitting. We end up with 19p.

To make the cap sit tighter on the baby’s head, make a decrease in the next row: 1 chrome ., 2 – 1 knit ., 2 – 1 purl . Remaining – 10 p.

We fold the lapel to the wrong side . side. We cast on 55 loops (for the tie), then 15 sts from one half - the “Rhombus” pattern, 10 sts from the bottom of the cap, another 15 sts from the second half, and once again we cast on 55 loops (the second tie). First row - knit all:

55p.+ 40p. +55p.=150p.

We make two rows with a boucle pattern and close the loops. We cut the thread and thread its edge.The girl's hat is ready!

Winter hat with ears for a newborn with description and diagrams

The calculation was made for a head volume of 35 cm. Knitting density – 2px 3 r. = 1 cm x 1 cm.

To work you will need:

∗ 50 g of wool yarn for the cap and a little colored yarn for decoration;

∗ knitting needles No. 2 – straight and circular

Description of knitting pattern

Let's start with the ears. To do this, dial 4p. on straight sp. We knit 16 rubles, making symmetrical increases on both sides:

2 rub. and 4 r. – plus 1 st on each side;

6 rub. – plus 2 stitches on both sides;

8 rub. - plus 3p. on 2 sides;

15 rub. and 16 rub. – plus 1p. from 2 sides.

Next, we transfer one eye to a circular knitting needle (22 stitches), cast on 11 stitches, transfer the second eye, cast on 25 stitches. Then you need to knit 30 rubles. (10 cm) in stockinette stitch. For the crown of the cap, we decrease only in even rows. We divide all the loops (80 stitches) into five parts and in each of them at the edges we subtract one stitch - per row minus 10 stitches. When 6 stitches remain. in each part - we make a decrease in each row, and not every other time. Thread a thread through the remaining loops, bring it to the wrong side, and tighten.

You can decorate and sew on ribbons in different ways – for both girls and boys.

The ears of newborns can be insulated with fur. A variant of a winter children's hat for a boy, knitted using the same pattern, but with a 2x2 elastic pattern. The children's hat with ears is ready!

Knitted hat with a bear for a newborn with description and diagrams

To work you will need:

∗ blue yarn – 50g;

∗ some black and lilac yarn;

∗ circular and straight knitting needles No. 2;

∗ needle with a large eye;

∗ one black bead.

Description of work

We start from the top of the head. We cast on blue yarn with knitting needles 80 sts and knit 50 r. facial stitch. Then three rubles. white yarn and bind off all stitches. Pull the loops at the top of the head. Then you need to fold the bottom edge of the hat and hem it. Now knitting ears. We cast on 22 sts from the edge loops onto straight knitting needles and knit 16 r. stockinette stitch, as in the previous model. We gradually make a decrease:

1r. –1 chrome, 2 knits together, 16 knits, 2 knits together, 1 chrome. 20 p. left;

2 rub. -1 chrome, 2 together purl, purl, 2 together purl, 1 chrome. 18 points left;

From 3 to 12 p.m. - according to the drawing;

13r. – 1 chrome ., 2 – 1 person., 2 persons together., 2 – 1 person., 4 persons ., 2-1 persons ., 2 knits together, 2 -1 knit, 1 chrome 12 p. left;

14 rub. – 1 chrome ., 2-1 persons, 2-1 persons, 2 persons ., 2-1 persons, 2 persons together, 1 chrome 8 p. left;

15 rub. – 1 chrome ., 2-1 persons., 2 persons., 2-1 persons., 1 chrome 6 p. left;

16 rub. – 1 chrome ., 2- 1 person, 2- 1 person, 1 chrome 4 p. left;

Close the loops.

For the second ear, through 11 loops of the bottom of the cap, we cast on 22 sts. and knit the same as the first one. We make laces and sew them on. We embroider a bear on the front of the hat with white threads - see diagram.

A beautiful knitted hat for a newborn baby is ready.

We hope that our article with descriptions and knitting patterns will help you knit a beautiful and warm hat for your baby. Happy knitting!

Every young mother is interested in knitting hats for children from 0 to 3 years old with descriptions and patterns. After giving birth to a child or even during pregnancy, you have to acquire clothes for a newborn or unborn baby. The key point here is hats for little ones. They can be purchased, but it is much more pleasant to knit them yourself - this way the parents really care. Knitting hats for children from 0 to 3 years old is not so difficult - it is only important to choose the optimal model and learn the technique.

Newborn cap

Knitting for children begins with caps for newborns, which are required upon discharge from the maternity hospital in any weather - be it summer or harsh winter, one standard model of a knitted cap will do. The only difference here is the choice of yarn. For summer, it is better to choose cotton with acrylic or a special soft weave - it is important that the hat is soft. If we are talking about winter, then choose 100% acrylic yarn - provided that it is put directly on the baby’s head. Hats with added wool are worn only on the inner textile cap. Doctors themselves do not recommend wearing wool clothes on newborns - this can cause allergies.

Knitting a hat for children from 0 to 6 months is performed in the following sequence:

Buy yarn - 100 grams of yarn with the volume of thread for knitting needles No. 3 is enough. Prepare knitting needles No. 3, you can use No. 4 - then the fabric will be loose and suitable for the summer version.
As an example, we will describe a knitted cap using knitting needles No. 3-3.5. Therefore, only 70 loops are cast on with yarn.
For a better fit of the fabric to the head, knit 8 rows with a 1x1 elastic band.
Next, switch to stocking or garter stitch and knit another 20 rows. Do not close the loops, but break the thread. The result will be a canvas for the oval of the child’s head.
Now start knitting the back of the cap. Carefully divide the fabric into two parts using the second knitting needle. Transfer 25 stitches to the right needle without knitting. Attach a thread between the loops placed on the knitting needles for further knitting.
Knit 19 stitches with the attached thread. Make a connection between the back and left side parts by knitting the 20th loop of the back part together with the first loop of the left side with a purl loop.
Turn the work over and repeat the same method of connecting the parts. It turns out that only 20 loops of the back part are knitted, and the side loops are knitted like edge loops with purl loops.
The rads are knitted in a similar way until there are 3 loops left on the side parts.
The last 3 loops of the side parts are knitted using the same technique, only the loops of the back part are knitted 2 together according to the pattern - this is necessary to tighten the bottom edge of the hat for a newborn.

Finally, tie the ties for the hat. This can be done in two ways - crocheting or knitting. The ties are crocheted, catching the loops of the corners of the cap. After grabbing, tie chain loops with a hook and attached thread to the required length of the ties. Make a rise and knit one row with single crochets to the captured loops at the beginning of knitting. When finished, make a connection with the main fabric, tear off the thread and hide it.

If you don’t have any knowledge of crocheting, you can use the same knitting needles. To do this, use knitting needles to grab the same corner loops of the resulting cap. The optimal number of loops is 4, where 2 will be on the edge loops. 4 loops strung on knitting needles are knitted in garter stitch to the required string length. You can resort to knitting in stocking stitch - only in this case the ties will twist in a spiral due to the low density of the resulting “fabric”.

This technique with a standard description of hats for newborns, which can be used for knitting products for children under 1 year old. At older ages, slightly different models are used - more complex, but attractive.

Hat for a child from 1 to 2 years old

Hats for children under 2 years old may be more fashionable, but with the obligatory presence of “ears”. Such “ears” with ties are required to prevent the headdress from being taken off during a walk - children at this age refuse to wear hats, so a child sitting in a stroller can take off the hat immediately after putting it on again.

A standard hat for children under 2 years old with a description and diagrams can be found on the Internet. But for beginners, the following simple description of the headdress is offered:

Take yarn with a gauge for knitting needles No. 3 or 3.5. Prepare knitting needles with the stated size and start knitting for the next example.
Cast on 7 stitches on the knitting needles - 2 of them are edge stitches. Knit 26 rows in garter stitch, adding 2 stitches on each knit row. The addition of loops is carried out after the edge and before it by knitting from 2 loops - 3 loops. To do this, remove the edge, knit one loop, make a stretch of fabric between the two involved loops, knit the 3rd loop. This way you won't get the holes that are typical for adding holes. The result will be 33 loops.
The resulting canvas is an “ear”. It is not removed from the working needle, the loops are not closed. Just move the fabric aside and knit a second one in the same way on the same knitting needle.
The resulting “ears” are combined in the 27th row into one fabric - knit the first 33 loops, cast on 10 loops on the knitting needles, knit the second 33 loops.
Knit with a turn in garter stitch. In each 4th row of the front row, make a standard increase in stitches. In the same way, add only 8 loops - make 4 additions in the fabric. As a result, there are 84 loops on the knitting needles.
Now you should connect the ears with knitting the forehead line. To do this, knit the entire fabric - 84 loops, cast on another 16 loops, connect the fabric, getting rid of the edge ones by simply knitting loops.
Next, the hat is knitted in the round - there will be only 100 stitches on working knitting needles. Knit in a similar way for almost the entire height of the head - it is better to measure directly on the child. Approximately 26-34 rows will be required.
Subsequently, decreases are carefully made. To do this, knitted 100 loops are divided into an equal number of sections. For example, 100 loops can be divided into 10 sections.
Decreases are carried out in the standard way - by knitting 2 loops together, knit or purl, as follows from the drawing and the selected knitting pattern. Carry out decreases at the end of each division into parts - knit together the last 2 loops of the part. Decreases are made in each front row, that is, after two rows.
Decrease stitches in this way to the remaining 10 stitches on the knitting needle. Cut a thread 15 cm long from the ball and connect the remaining loops - stretch the thread cut from the ball through all the loops. Pull the thread so that there is no gap left between the loops.
Hide the thread in the canvas. Additionally, make a pompom and attach it to the top of the head - this will further hide the gap between the remaining loops.

This is a simple standard knitting cap for children under 2 years old with a description. Knitting ties for “ears” is carried out in the manner described above. The model is suitable for beginners, but experienced needlewomen can use more complex knitting of hats for babies.

Hat for children 3 years old

Knitted hats for children 3 years old can be knitted without ties. There are many models of similar knitting, but it is enough to use simpler models for boys and girls.

Hat for girls

Knit your young fashionista a hat with imitation cat ears. Girls are simply delighted with the presented patterns, and mothers who are beginner knitters will gain incomparable experience in knitting modern patterns.

So, take the thread and suitable circular knitting needles. Follow these steps:

The result is a ready-made hat for a girl, where cat ears are made at the end. Tie belts with thread for tying or use special threads with tassels for sewing and knitting. Grab the corners of the cap and tie them with thread at the same distance from the top of the corner to get ears of the same size. Make sure that the ears do not exceed the permissible size - otherwise, the finished hat will rise, as a result of which the child’s ears are constantly exposed.

You can knit a hat for a boy in a similar way. Only in this case, the cap is put on across - an imitation of a dragon's scallop is created, which was fashionable earlier and is popular now.

Boy's hat

You can provide a knitting cap with a description for a boy separately. For a simpler option, a standard cap without ties is used, which is decorated by experienced craftswomen using complex patterns on the main fabric. Braids work best for this, but you can decorate it using two contrasting threads to get a striped rainbow pattern.

Knitting a hat for a 3-year-old boy is carried out in the following way:

Take a thread and suitable knitting needles, knit a sample, bring it to a “finished” state, perform standard calculations to determine the knitting density.
After completing the calculations, start knitting - cast on the knitting needles the required number of loops.
Knit 8-12 rows with 1x1 rib. You can use a 2x2 elastic band if the yarn is thin and you get a characteristic “ripple” on the elastic.
Now move on to knitting the main pattern for the hat. The number of loops for knitting a hat should be calculated taking into account the repeat of the selected pattern. If garter or stockinette stitch is used, the number of stitches is determined only taking into account the density of the yarn and knitting needles.
Having knitted the main fabric almost to the height of the child’s head, they begin to decrease the loops. To do this, the number of loops is divided into equal sections. If this is not possible, send most of it to the occipital region with a seam.
Decrease occurs in each front row of the hat - at the end of each part, 2 loops are knitted together according to the picture. If you use simple stockinette stitch, decrease only at the back or front walls. It is important to create a neat knitting of the crown - let it create a characteristic “spiral” pattern.
When there are 8-10 loops left on the knitting needles, a 30 cm long thread is cut from the ball. Make a join by pulling the thread through the remaining loops and tightening them at the end - taking into account the necessary absence of gaps between the loops.
Sew the edge loops with a needle and the remaining cut thread. You can use a crochet hook by decreasing the knitted fabric with knitting needles.

It is better to use a pompom as a decoration for such a hat for a boy - when attaching it, the loops on the top of the head will be additionally tightened. This model is often made striped, and during stripes with changing colors, a change in pattern is used. For example, the main fabric is knitted with blue thread and stockinette stitch. Add white stripes using garter stitch on the main fabric. The canvas will visually gather like an accordion, which looks interesting and attractive.

It is important to note that when using certain patterns for knitting hats, it is necessary to first knit the appropriate samples to correctly calculate the number of loops. Without preliminary calculations, you can make a mistake with the size and the product will turn out small. When knitting in the round, you cannot correct a mistake.

When knitting hats for children from birth to 3 years old, you can use the given patterns, technologies and descriptions. It is recommended to add your own imagination to standard knitting techniques in order to make your child an individual personality and just a happy person.

Knitted hats for newborns will definitely come in handy on walks, so you need to take care of purchasing them in advance. Although you don't have to buy it at all. If mommy has experience in crocheting or knitting, then it will not be difficult for her to knit a warm and beautiful hat for her baby. How to choose the right hat model for your baby?

Model selection

For a newborn baby, hats with ties that fit snugly to the head, cover the ears and do not contain seams are more suitable. If the model involves seams, then it is better to make them outward so that they do not rub the baby’s skin. A tight fit will ensure reliable heat retention, and the ties will prevent the hat from getting loose even when the child is actively moving. The most successful models of caps for newborns are knitted caps, simple tight-fitting caps.

Successful models of hats for babies

Models without ties, such as caps or regular hats with pompoms, can also be considered as headwear options for babies, but they are less comfortable for both mother and newborn baby. But they look beautiful and are perfect for a photo shoot or for a baby who is already sitting instead of lying down during a walk.

Models that are suitable only for photo shoots or for babies aged 9-10 months

How to knit a hat for a newborn with knitting needles

"Owlet" is a very fashionable and comfortable hat for a baby.

Knitted hat for a newborn “Owlet”

The yarn calculation is given for a hat for a head circumference of 34-36 cm. The elastic pattern that runs along the sides of the model stretches perfectly, so the hat will fit for a long time. Of course, in white, such a pattern is more suitable for girls, but using gray or brown yarn, you can knit such a hat for a boy.

Materials

Yarn (100% wool) – 50 g.
Colored yarn for finishing (eyes and beak) – 5 g (leftovers can be used).
Knitting needles No. 2.

Scheme

Pattern "Braids". Scheme 1

Pattern 2. Needed for knitting “ears” so that the model covers the child’s ears

Description

1. First, knit the middle part of the hat with the “Braid” pattern. It must be knitted to a length of 24 cm from 37 initial loops (+2 edge loops). To complete the drawing, you must use the diagram and this detailed description:

The following rows are repeated from row No. 2 according to this description

2. Now you need to complete the side parts of the hat. The knitting method used is “Lush Rib”. The loops are cast on from the middle of the middle part of the hat (2 loops in each edge). In order for the owl to have protruding ears, in the last 5 edge loops you need to cast on 3 loops for knitting the sides. One row is a regular 2x2 elastic band. Next comes the “lush elastic” (purl stitches are knitted, and knit stitches are knitted like this: the knitting needle is inserted into the loop of the bottom row and a new loop is pulled out, while the top one is discarded).

3. In order to keep the baby’s ears warm, you need to tie the “ears”. The “ears” are knitted according to pattern 2 (the length of the “ears” is 4 cm). Increases were made by 1 stitch per person. rows. Then decreases are made in the same way, also 1 loop at a time, so that the “eye” turns out symmetrical. If you want to make the “ear” longer, then you need to increase it by 2 loops.

As a result of your efforts, you should get something like this:

Advice: The master class does not use a pattern, but based on this photo it is quite easy to construct it on paper. It will be more convenient to knit a hat by applying work to it.

4. Next you need to sew a hat and crochet it in a circle using the “crawfish step” method.
5. Ties can be made in any convenient way - knitting, crocheting, using ready-made cord or braid.
6. On the top of the hat you need to sew tassels made from the same yarn that was used for knitting.
7. The eyes and nose can be crocheted separately and sewn on, or they can be embroidered with a thick needle from woolen threads of a suitable color.

The hat is ready!

Simple knitted hat for baby

The hat is knitted extremely simply; no pattern or diagram is needed. Calculations are given for a hat for a 3-5 month old baby.

This model is also suitable for a boy, if you leave it without decoration or decorate it with suitable embroidery or appliqué instead of a flower.

Materials

For the header:

Soft yarn for children – 50 g.
Knitting needles No. 3.

For the flower:

Wool yarn – 20 g.
Hook No. 5.

Knitting patterns

Persons smooth surface - faces. rows of faces are knitted. loops, purl rows - purl. loops.
“Rubber band” 1x1 – alternate faces. and out. loops through one.
Knitting density: 10 cm x 10 cm = 21 loops x 27 rows.

Description

Knitting begins with a set of 65 initial loops. First comes 6 rubles. with an elastic band. Then 43 rubles. persons satin stitch The hinges are closed.
Now you need to fold the workpiece in half and sew the side and top seams.
You can make a flower for a girl. To do this, crochet a chain of 60 air. loops First row - st. without a crochet. Next comes the “shell” pattern (five double crochets are worked into every fifth stitch). At the end, the thread is secured and the knitted strip is folded into the shape of a rose. All that remains is to sew the flower to the hat.

The hat is ready!

Knitted universal hat for a newborn

Such a hat will be a good option for the fall, and if you add it with a warm fleece lining and choose 100% wool yarn, then this model will be suitable for the winter.

The model is universal and suitable for a child of any gender

Materials

Woolen threads (it is better to take two colors) – 50 g.
Knitting needles No. 3.

Progress

1. Cast on 70 initial loops (edge loops are included in this number). First, an elastic band is knitted (you can use 1x1 or 2x2). Six rows are knitted with an elastic band. Next, take threads of a contrasting color and knit two rows of faces. knitting.
2. Then comes the pattern, it is knitted according to the following description:

Step-by-step description for knitting a pattern for the main part of the cap

3. Now you need to make 10 decrease stitches and knit “teeth” that will decorate the hat. To do this, 6 rows are knitted. stitch, row of two stitches together. and one yarn over.

You get these “teeth”

You need to finish the cloves by knitting 5 rows of faces. satin stitch

4. To start the back of the hat, you need to make 8-10 decreases and knit the back of the head like the heel of a sock (knit only the middle, closing the side loops).

5. All that remains is to tie the strings (you can use a ready-made cord or braid).

The baby's hat is ready!

Front and back view of the finished hat

An easy-to-make classic hat for boys

Despite the fact that the model is positioned as a hat for a boy, you can use colored threads and decor in the form of a flower, bow or floral embroidery and knit a new thing for a little fashionista.

Comfortable hat for autumn-spring

Materials

Wool acrylic yarn (you can use a mixture of fibers) – 1 skein.
Stocking needles No. 4.

Size

The model is designed for 6-9 months. The values indicated in brackets are for a child from one to one and a half years old.

Description

1. Work begins with 72 (84) initial loops. They must be connected to form a circular row. Mark the connection location with a marker.
2. Next, a 2x2 “elastic band” is knitted in the circle to a height of 2.5 cm from the beginning of knitting.
3. Then comes the pattern: This hat will suit a baby from birth

Materials

Children's wool yarn – 50 g.
Knitting needles No. 5 – 3 pcs.

Size

For babies from birth to 3 months. The child's head circumference is 33-35 cm.

Knitting density

5 cm x 5 cm = 8p. x 11 rub. (pattern “Front stitch”).

1. Main part. Knitting begins with a set of 44 loops. And then it goes according to the scheme:

Row 1 (wrong side) – knits only. loops.
Row 2 (front) – faces only. loops.
Row 3 – purl only. loops.
Row 4 – faces only. loops.

The next 4 rows repeat the sequence, and so on until the knitting becomes 13 cm. You need to finish on the wrong side of the faces. loops.

2. Making the back seam. In fact, the hat will be seamless, and the back seam will be knitted. To do this, the loops are divided equally into two knitting needles (22 pcs each). Now you will need a third knitting needle, with which the loops will be closed (the loops on the right and left sides are knitted together).
3. Ties. You need to measure three threads 97 cm long from the main yarn. Fold them together and thread them through the hole in the pattern along the edge of the cap on the right. Tie 6 ends into a knot - the tie is ready. The left tie is done the same way.

You can use the purchased lace as ties or crochet chains from air. loops and sew them to the hat.

The hat is ready!

Children's hats provide limitless space for imagination and creativity. Beginning needlewomen can start with simple models that can be decorated with additional decor and turned into exclusive items. Well, those who are well acquainted with knitting can take more difficult models with complex patterns of openwork patterns. In any case, things made with your own hands look original and carry a huge charge of love and warmth. Even more ideas in the article “Crocheting hats for newborns”.