Applying gel polish at home. How to apply gel polish at home. Possible mistakes when applying gel polish

Gel polish at home - it's easy! Step-by-step instructions for applying and removing gel polish at home, as well as all the secrets and tricks!

At first glance, gel polish is a rather complicated procedure, and women prefer to have it done by a specialist in a salon. In this article, you will learn how to cover your nails with gel polish at home step by step, what materials are needed for this, and most importantly, how profitable it is to make gel polish at home.

Gel polish at home: what you need

To cover, you will need a starter kit of tools and supplies. We recommend purchasing a beginner's kit, which contains everything you need for a gel polish manicure. You can also purchase the tools separately.

. We wrote in detail how to choose a lamp for manicure.

A manicure set that must include scissors, clippers and a pusher.
Buff for polishing and nail file.

Cuticle remover and orange sticks.
Lint-free wipes.
Nail degreaser.
(ultrabond). If you have thin and brittle nails, it is better to choose an acid-free primer.
Base, top and color gel polish. How to choose and, we have covered in other articles.
, if you want to perform a creative manicure.
Cuticle oil.
Remover (removal liquid), cotton pads and gel polish remover.

Gel polish coating at home

Preparing nails for coating: doing a trimmed or untrimmed manicure. First, apply remover to the cuticle to soften it. Then push back the cuticle with a pusher or orange stick, after which we treat the skin at the nail folds and remove the cuticle.

We file the nails to the desired shape and polish them with a buff. This is necessary for strong adhesion of the nail to the base.

Wipe the nail plates degreaser. We recommend using lint-free wipes, as lint can make your finish uneven.

Apply primer (ultrabond), avoiding the skin around the nail. The primer is needed for strong adhesion of the base to the nail plate: it is something like double-sided tape. If you have naturally strong, non-brittle nails, then you can skip this step.

We cover the nails with a thin layer of base, seal the ends, dry in a UV-LED lamp for 2 minutes/30 seconds. If you have an uneven surface of the nail plate, you need to level it.

We apply colored gel polish, seal the ends and place them back in the lamp.

The final stage is applying the finishing coat. Don't forget to seal the ends with topcoat, otherwise the gel polish will quickly chip. Dry the top coat in a UV-LED lamp for 2 min/30 sec.

If you have a top with a sticky layer, you need to remove it using a clinser.

Manicure with gel polish is one of the most popular procedures today. This is not without reason, because such coverage has many advantages. The service is offered by both professional artists in salons and ordinary amateurs at home. But why pay extra money if you can do everything yourself? It is important to master the basic aspects and rules, then the result will pleasantly surprise you.

Key rules when performing a manicure with gel polish

Before considering the necessary equipment and materials, as well as step-by-step instructions, you should familiarize yourself with the basics when performing a gel polish manicure. They will help you avoid mistakes and achieve the desired result. So, the key rules:

The first thing you need to do is organize your workspace. This should be a comfortable place with good lighting so that you can carry out the procedure in comfort at any time of the day. Light plays a very important role and a lot depends on it. This is because if you lack it, you may miss the smallest details that will be noticeable during the day. Small smudges in the side rollers, painting over the cuticle - you most likely simply will not see all this in dim light. As a result, you will have to redo the manicure, since such details look very sloppy and sloppy. Make sure that there is enough free space on the table at which you will work. Each tool or tool must be in its place; determine them in advance. For example, when painting the nails on the left hand, an ultraviolet lamp is next to it, varnishes are on the right, all the necessary equipment is in a special container, everything that will not be useful in the near future is moved to the side and is not in the way. Such an organization will put you in the right frame of mind. Also, you will not be annoyed by a fallen object that was lying in the wrong place.
Second: before starting the procedure, make sure that you have all the necessary materials. Sometimes it happens like this: a girl sits down to do a manicure, and already in the process she notices that she has run out of top coat, or she forgot to buy a degreaser. All this, of course, brings nervous tension. To avoid such unpleasant moments, check the availability of what you need in advance.
Rule number three: stay focused on the process. Do not be distracted by external stimuli and extraneous things. Give the procedure some time: if, for example, soup is being cooked in the kitchen, which needs to be monitored periodically, and at this time you decide to quickly get a manicure, nothing good will come of it.
Lastly, keep your work area clean. Don’t be lazy and wipe the table with a damp cloth after each procedure, disinfect the equipment so that bacteria do not accumulate on them, and throw away used cotton pads. After all, it is much more pleasant to do a manicure in a clean environment than to sit surrounded by dust, dirt and debris.

An example of a properly organized workplace for manicure

What you need for a gel polish manicure

If you've ever done a manicure, then you roughly know what tools and materials are needed for this. The girls are familiar with the usual coating; this is nothing new for them. But gel polish raises many questions and gives rise to various misconceptions. Some, for example, think that an ultraviolet lamp is not necessary for the coating to harden, and that a base and top coat are not needed.

Gel polish manicure cannot be performed without special materials and tools.

It is worth understanding in detail what is needed to complete the procedure. So this is:

File 180–240 grit. You can purchase any from the specified range. There are only small recommendations for choice: for thin and flaking nails, it is better to buy a file with an index of no more than 190 grit, and for strong and healthy nails, 210–240 grit is more suitable. It is needed to form a free edge.
Nail scissors. Choose high-quality models with sharp blades. This tool is useful for trimming the cuticle, as well as for shortening the free edge. If your nails have grown a lot, it is better to first trim them with scissors and only then shape them with a nail file.
Buff. It is needed to prepare the plates for applying the base coat. After polishing with a buffer, the surface of the nail becomes rough, which ensures good adhesion to the gel polish. This extends the life of the manicure for quite a long time. Gel polish placed on unprepared plates may come off in a week, or even earlier.
Nail clippers. This device is necessary for quickly cutting off burrs. They can also work with cuticles in places where scissors fail. Wire cutters usually have very sharp blades, so they need to be handled with extreme care.
Orange sticks. They will be needed to push back the cuticle, as well as to remove stubborn varnish from the side rollers if you suddenly made a careless movement.
Top coating. It is applied at the very end and is required to consolidate the result. Without it, your manicure won't last long. It can be either glossy or matte. It all depends on the desired design. Nowadays it is very popular to combine these coatings with each other. For example, the nails on the ring and middle fingers are matte, while the rest are glossy. It looks very modern and stylish.
Base coat. This is the very first layer that is needed for the coating to adhere to the surface of the nail. If you just apply gel polish, it may peel off after a few days and all the time and effort will be wasted.
Colored coating. The main tone in which the plates are painted. You can choose several colors or just one. Think about your desired design in advance. When purchasing, choose manufacturers with good reviews.
Liquid for removing sticky layers. If you were unable to find it in stores, then ordinary alcohol or tinctures based on it would be a good alternative. After polymerization of the gel polish coating, a sticky layer remains on the plates, which is removed using such a liquid.
Cotton pads. You will need about five pieces. They are moistened in liquid to remove the sticky layer and remove it.
Bath with warm water and 2 tbsp. l. sea salt. This is necessary for the standard cuticle steaming procedure. In addition, the plates are strengthened by adding salt to the composition. This bath is very useful before applying gel polish.
Cuticle oil. After a manicure, redness or even sores often remain. The cuticle can be damaged even by negligence. To speed up the healing process, you can use coconut, sea buckthorn, olive and shea oil.
Ultraviolet lamp. This is a device without which it is impossible to do a gel polish manicure. When purchasing, pay attention to more powerful models of 36 and 48 watts, since they will polymerize any coating in just 1–2 minutes. Devices with a lower indicator may cause the gel polish to curl and may not dry it at all.

Olive oil is great for lubricating cuticles

Important! When choosing a base, top and color coating, choose one manufacturer. Products from different companies may not be compatible in composition, as a result of which the gel polish may peel off after a few days.

All this is a standard set for creating a manicure with gel polish at home. After making sure that all the necessary items are available, you can begin the procedure itself.

How to do a manicure with gel polish at home: step-by-step instructions

Making a manicure with gel polish at home is very simple. You need to master the main rules and follow the instructions, then the result will pleasantly surprise you. Let's look at the process step by step:

The first thing to do is soften the cuticle with a bath. Remember that there should be no coating on your nails before starting the procedure. Take 1 liter of warm, but not hot water, dissolve 2 tbsp in it. l. sea salt and lower your hands for 20 minutes. After this time, remove them from the container, rinse them under the tap, wipe them with a towel and begin processing.
Use an orange stick to push back the cuticle. Pieces that remain hard can be removed using nail scissors or nail clippers. Also at this stage you need to get rid of burrs.
After you have processed the skin around the nail, we begin to form a free edge. There are three most common options that are offered in many beauty salons: square, semi-square or oval. For short fingers, the latter form is more suitable, as it visually increases the length and the hand ultimately looks more graceful. If the free edge has grown too much, first trim your nails with scissors to the desired length, and only then start working with a nail file. This will save you time.
The next step is polishing the plates with a buff. Make sure that the entire nail is treated in this way. Otherwise, in those places where the surface has not become rough, the varnish may chip off after several days of wear.
Next, we begin to apply the first layer of coating. Place a drop of base gel polish in the middle of the nail, and then begin to carefully move the brush towards the cuticle, getting as close to it as possible. After this, we distribute the coating on the right and left sides, preventing it from flowing into the side rollers. If this suddenly happens, remove the smudges with an orange stick before placing your hand in the UV lamp. Most often, the base coat has a thick consistency, so if you take a small amount of the product, it will not spread. So, after you have applied the first layer, dry the gel polish in a 36-watt ultraviolet lamp for 2 minutes. The time is halved in proportion to the power. Thus, in a device with a power of 48 watts, the layer is polymerized in just 60 seconds. In lamps with a lower rating, the coating can dry up to 5 minutes.
It's time to apply the color coat. Using the same technology, we paint each nail with it. Apply it in a thin layer, otherwise the risk of gel polish curling increases. We place the hand in the UV lamp for the same time as when polymerizing the base coat. After the first, you need to apply a second layer and dry it in the same way. Remember that the final result largely depends on the quality and power of the lamp. The optimal number of layers is three. But if the gel polish has a loose texture, apply it 4 times already.
The last stage is related to the topcoat. It is applied in a thin layer to each nail. Make sure that it is distributed over the entire surface of the plate. Dry it in the same way as the other layers. After polymerization, the gel polish becomes sticky. This can be removed with a cotton pad soaked in a special liquid or alcohol.
At the end of the procedure, apply the selected oil to the cuticle and side ridges.

A manicure with gel polish will delight you for several weeks.

Manicure with gel polish at home is ready!

Interesting! Have you ever wondered how many manicures one standard size 7 ml jar of gel polish is enough for? The base coat is used up in about 25 treatments, the top coat in 20, and the color coat will run out after 15 uses. The number of applications increases in proportion to the volume of the bottle with gel polish.

Master class on manicure with gel polish: video

Removing gel polish with a manicure machine

There are several ways to remove gel polish, but one of the safest is to remove the coating using a manicure machine. You do not dry out the plates with caustic substances, as happens when softening gel polish with a special liquid, and you also save yourself from the unnecessary hassle associated with cutting out squares from foil and semicircles from cotton pads. The device has a large number of advantages, which is why many beauty salons now prefer it. This method is safe only if the procedure is followed according to all the rules.

So, a very important point is the choice of cutter. There are two options: ceramic and carbide. The former are distinguished by their high price and corresponding quality. The latter are cheaper, but their characteristics are slightly worse. Ceramic cutters do not heat up because this material has good heat resistance. They are also much softer and do not cause such strong vibrations as are present when using the carbide type. The service life of the nozzle with regular use is approximately 3 years. Carbide cutters remove the coating with shavings and are more suitable for removing too thick layers of gel polish, as well as extended nails. When used for a long time, these attachments become hot. The advantage of carbide cutters is the absence of nail dust, when many people begin to sneeze when it appears in the air.

Choose only high-quality manicure devices, as well as cutters for them

Before starting the procedure, make sure that your elbow and arm are resting on the table, as support is very important. Find a comfortable position and start removing gel polish with a manicure machine. The cutter should move from the cuticle towards the free edge. Cut the coating evenly, taking short breaks of a few seconds. There is no pain during removal. A common myth: you can accidentally cut through a natural nail with a milling cutter. This is just a misconception. You are guided by the basecoat layer and once it is removed, you stop driving the cutter in this place. It is also worth noting that the nail consists of more than a hundred layers, pressed tightly against each other. Even with careless removal, only 2-3 of them are damaged.

Pros and cons of gel polish manicure

Gel polish has many advantages. That is why he was loved by a huge number of representatives of the fair sex around the world. Let's look at them in detail:

So, one of the main advantages is durability. If you compare gel polish with the usual coating that everyone used to paint their nails before, you can see the clear superiority of the first. This manicure will have an attractive appearance for several weeks. Gel polish is not afraid of moisture, you can easily wash dishes and do other household chores with it without fear that the coating will rub off. Basically, the need to update your manicure arises only when the nails grow and the distance to the cuticle is about 3 mm.
Gel polish remains glossy. The top layer does not wear off or fade during the entire period of wearing the manicure. This provides a flawless appearance to your nails, something you could only dream of before.
No matter what they say about the dangers of gel polish, it, on the contrary, protects the plates from the harmful effects of the environment. The only danger is when removing it. If you remove the coating incorrectly, your nails can be damaged.
Gel polish does not have an unpleasant toxic odor, which is present in all ordinary coatings. It has almost no aroma.
Formaldehyde, which is part of regular varnish, is absent in the gel.

Photo of a manicure after a month: the nails have grown, and the coating looks just as beautiful

Now it's worth talking about the disadvantages. Among them the following can be noted:

When drying in a lamp, a burning sensation may sometimes occur, but this does not pose any danger. During the polymerization reaction, a reaction occurs with the release of a large amount of heat, resulting in such an unpleasant sensation. If you feel a burning sensation, take your hand out of the UV lamp for a couple of seconds and then put it back in there.
Removing gel polish takes more time than it would take to remove a regular coating. But this needs to be done only once every 3-4 weeks. And in order for regular polish not to look sloppy, you need to renew your manicure every 2-3 days, or even more often.
Purchase and use of a UV lamp. Some have a negative attitude towards ultraviolet radiation, while others are not satisfied with the very fact of purchasing it, because this is an additional expense. Yes, a good lamp costs about 3 thousand rubles, but this saves you from having to visit a salon and pay round sums for one manicure. It is much more profitable to do a manicure with gel polish at home: all expenses are recouped in a couple of procedures.

Many people are put off by removing it from a gel polish manicure.

Gel polish has many more advantages than disadvantages. This is a good reason why you should choose this coating.

Important! A manicure with gel polish can be done 3-4 times in a row, after which the nail plates need to rest for about a week. During this time, cover your nails with nourishing compounds and take baths: this will keep them strong and healthy.

Secrets and lifehacks

Like any other business, manicure has its secrets and life hacks that make life easier and make each procedure easier. Let's look at them:

If your nails are painted a solid color but you have to go to a special event, the idea of temporarily changing the design will be useful. You can paint regular patterns on top of the gel polish, and in the morning you can wipe it all off and go to work with a strict manicure. Liquid with acetone will have no effect on the gel coating.
The neck of the jar with gel polish should be regularly cleaned with a cotton pad soaked in a regular coating remover. This way the lid will always open without difficulty, and the product itself will not become thick over time.
To ensure the color of the polish is as rich as it looks in the bottle, apply two coats of white coating to your nails, and then paint with your chosen shade. Its brightness will increase.
If you are a beginner and do not yet have the skill to paint your nails perfectly evenly, apply PVA glue to the side ridges and cuticles, wait until it dries, and then start creating a manicure. Now if you accidentally go beyond the plate, everything will remain on the film, which can then be easily removed.

White color on nails creates a so-called base, laying on top of which any color will look saturated

Such simple tips will be useful for both beginners and experienced craftsmen.

Design ideas: photo gallery

A striped manicure is a very original and bright idea. This lunar manicure in red is perfect for evening events. A very delicate shell manicure in burgundy and white with rhinestones. A manicure in red and black, made using stencils, looks elegant. Youthful and bright manicure with drawings will please you. every young girl An elegant manicure in silver-green tones, made using the stamping technique
Reverse moon manicure in red and white looks very modern and stylish
An unusual manicure in blue tones with a splinter effect. A delicate wedding manicure with a white pattern will make the bride’s hands irresistible. A classic French manicure is suitable for any occasion.

So, now every girl and woman can give herself a wonderful manicure with gel polish at home. Follow all the tips and recommendations, then the result will be no different from the salon one. Be healthy and beautiful!

Looking at the precise movements of the master in the salon, everything seems simple. We remove the cuticles, file the nails, consistently apply the required coatings and dry it all in a lamp. Gel polish manicure is ready!

The utopian perception leads to the decision to take care of their nails themselves, and women buy everything they need for a shellac manicure.

Disappointment sets in almost immediately: the compositions refuse to go on smoothly, the nails remain bald, and the designs don’t turn out well.

It's too early to get upset! There are many nuances in a gel polish manicure, but knowing about them, you can create the perfect finish. Where does the path to perfection begin?

The first difficulties arise with the base. This simple manicure layer often causes a lot of frustration for beginners. Why gel polish base does not apply evenly? What are the difficulties?

Most often the problem lies in the degreaser. When using a gentle fresher or its alcohol analogues, particles of moisture and fat remain on the nails, and this creates bald spots when applying the base. Changing the composition solves the problem.

Smooth application of the base is possible by following several rules:

Excellent nail preparation - best with a manicure machine

Few beginners know that gel polish doesn’t last very well on wet nails after a trim manicure. Do not apply gel polish after nail polish removers or products with oils.

The task of hygienic manicure is not just to give the nails the desired shape, but also;

remove scales from the split tip - the edge of the nail should be perfectly smooth;
slightly remove the top glossy layer from the nail plate and the old “absorbed” coatings;
gently remove the cuticle skin and the pterygium underneath;
remove dead cells from the side ridges.

The biggest danger at this stage is not being able to polish the nail. Here are two tips: when using cutters, position them along the nail and work without pressure, and when choosing a buff, avoid a hardness of more than 240 grit.

Degreasing and “priming”

Auxiliary products will not only clean the surface of the nail from invisible particles of dust and grease, but will also increase the adhesion of the nail plate to the base. First use a dehydrator, then an acid-free primer.

Correct application of base

The main secret is that the base should not get on the skin. But where the color will subsequently be applied, a base is needed. According to the primary classical scheme, the base is applied to the nails in a thin, thin layer.

Also, beginners should remember that the base spreads when drying, and leave a small distance to the skin.

In the new format, masters prefer to apply the base in a thicker layer, but not too thick: to level the nail plate and provide a high-quality base for the subsequent layering of gel polish.

Sealing the nail

The brush is placed vertically and the cut is covered with a thin layer of base.

Polymerization

Base coated nails are placed under a UV lamp for 60 seconds. If the lamp is LED, then for 10-30 seconds. In order for the base to set in an even layer, you need to dry either one finger at a time, or first 4, and then the thumb separately.

What to do if gel polish does not apply evenly

Gel polish does not apply evenly - a typical problem for beginners.

The reasons may be the following:

Shellac is of poor quality - it is better to use formulations from trusted manufacturers;
Unlucky color in the collection - in almost any brand of gel polishes you can find a couple of unsuccessful bottles in the collection, why this happens is not clear, but the gel polish can streak and you will have to apply additional layers
The pigment has sank to the bottom - roll the bottle in your palms, but do not shake;
An unevenly applied base can be corrected with a properly applied coating;
A UV lamp is turned on nearby - the composition spontaneously polymerizes, hardening in waves;
Gel polish is not applied correctly.

The last point can be eliminated either by very good master classes from the pros, or by strictly following the tips below:

You need a little shellac. Exactly as long as the brush “holds”. If the composition tries to drain, carefully remove the excess on the edge of the bottle.
Gel polish is applied by “stretching” the drop. Not with three strokes, as in a regular manicure, but with a large drop, which is carefully stretched with a brush in all directions - under the cuticle, on the sides, to the cut of the nail. Gel polish does not dry out spontaneously, and you can work slowly.
Three thin layers are better than one or two thick ones. It is the thick layers that cause bubbles and waves on the gel polish when drying.
Seal the edge of the nail during the last applied layer - with light movements of the brush along the cut.
Dry for sufficient time. In a UV lamp 120 seconds, in an LED lamp 30 seconds.
Remove the sticky layer with special degreasing compounds, and not with alcohol or acetone-containing liquids. Violation of this rule can lead to any unpredictable consequences - up to a change in the color of the shellac or the appearance of bald spots on it.

If bald spots appear during the process of applying gel polish, there is no need to be alarmed: the second or third layer will solve this problem.

Peeling or chipping of the coating is rare and is either a consequence of using a base/gel polish/top coat from different manufacturers, or ignoring the correct manicure and primer at the preparatory stage of work.

VIDEO INSTRUCTION

How to apply gel polish evenly at the cuticle

There are no particular difficulties here.

When working you need:

Pull back and fix the cuticle with your finger when applying gel polish;
Hold the brush at an angle of 45 when painting in the cuticle area;
For the cuticle, apply the first and second layers with an almost dry brush;
If it doesn’t work out, take a thin brush and first paint at the cuticle, then proceed with a regular brush;
Distribute gel polish by stretching, not by strokes;
Do not hurry.

If all manipulations are performed correctly, even the first time you will be able to apply gel polish butt to the cuticle.

The technique of applying gel polish has only recently appeared on the cosmetic services market, but already from the first months it has gained a large number of fans. Gel polish combines the durability of gel (which was previously used for nail extensions) and a wide palette of colored varnish.

Features of caring for nails coated with gel polish

Nowadays, manicure using gel polish is convenient and beautiful. Most girls regularly carry out this cosmetic procedure, as it is not only attractive, but also very convenient.

When performing the procedure, the quality of the material and the skill of the craftsman play an important role. You also need to remember that in order to wear gel polish for a longer period of time, you need to ensure proper care of your hands and nails.

For several days after the procedure, you should avoid visiting the steam room, do not wash dishes with hot water, or steam your nails.
You cannot file the nail plate or change the shape of the nails. These actions can damage the coating, allowing water to enter microcracks and cause the gel to peel off. It is better to shape the nail before applying polish.
When using household chemicals, be sure to wear gloves.
You cannot remove the coating yourself, as this can damage the integrity of the nail and lead to various inflammations.
No need to wear manicure for more than 3 weeks. With prolonged wear, toxins will begin to be released, and the overgrown nail will not look very attractive.
To moisturize the cuticles, you need to apply moisturizing hand cream.

To ensure a high-quality procedure, you should contact a professional. First, it’s worth collecting reviews and looking at photos of his finished works. The quality of the manicure depends on the work of the master.

These tips will help your nails be well-groomed and attractive, and their owner will not spend extra money on additional correction.

About gel polish manicure: information for beginners

Note! Coating is not only an exclusively salon procedure, now any woman can do it, just read a few articles on the topic “gel manicure for beginners.”

Gel polish is a type of manicure that involves covering the nail plate with a super-resistant varnish coating. A mandatory attribute when performing the procedure is an LED lamp. It is needed to dry all layers of manicure. You will also need:

base (base), primer;
color coating;
finish gel;
liquid to remove the sticky layer;
various nail files, buffs, lint-free wipes.

Note! The nail plate deteriorates mainly not from gel polish, but from improper application or removal of the material.

The main advantages of shellac are:

Easy to paint.
Long-term wearing (2-3 weeks).
It is good to remove using liquid or cutting.
The shine of the coating lasts throughout the entire wear.
Under gel coating, nails do not break and grow faster.

There are 3 types of coating systems:

Manicure gel polish

Single-phase. It consists of one color coating, is less durable, but is ideal for saving time.
Two-phase. Consists of a base and color coat or top and color coat, wears for approximately 7-10 days.
Three-phase is the most popular system, which includes a base, color coating, and top. This is the most durable system and suits almost everyone. It can be used at home.

Important! Beginners need to be careful when choosing a base and top coat. Manufacturers recommend using all three components from the same company. For thin and weak nails, it is better to choose a rubber base; in addition, you can use a primer, it creates an adhesion of the base to the nail. It is better not to save on money, since when using a cheaper primer there is a high risk of allergies.

The disadvantages of gel polish include the following:

Failure to comply with the time when using the LED lamp can dry out the cuticle or nail plate.
Aggressive shellac removers can have a detrimental effect on the structure of the nail.
Be sure to take a break between procedures.
It is possible to develop allergic reactions to the products used.

How to do a manicure with gel polish at home: master class

The period for which the coating is applied is 3 weeks. With the correct application technique, you can achieve a high-quality manicure for a long time.

Note! To avoid common mistakes (cracks in nails, chips, delamination), you must follow the application technology.

The following describes the procedure step by step.

Preparation of the nail plate is mandatory. First, the nail needs to be shaped: the free edge must be leveled and cleaned of dust. All movements should be carried out along the edge of the nail. The cuticle is also subject to mandatory removal. Next, using a buff, the keratin layer is removed from the nail; the surface should not shine. There is no need to remove the top layer too much, this will make the nail plate thin. Next, when using a degreaser, the fat is removed from the nail.

Correct technique

The next step is to apply primer. It serves to adhere the coating to the base. Be sure to use a primer on thin nails that often split.

Important! During the procedure, each product is applied in a thin layer.

The coating is applied from the edge of the nail to its base (cuticle), then in the other direction, avoiding application to the cuticle. The edge of the nail is covered most thoroughly. Then the applied base is dried in a UF or LED lamp (2 minutes or 10 seconds, respectively), after drying the base will be sticky, which is considered normal.

Next comes the application of a color layer. To give the color richness, it is necessary to cover it in 2-3 layers (the layers must be applied very thinly). If you make them thicker than expected, then there is a possibility of bubbles appearing on the surface of the nail. After each application of a layer, the varnish must be dried in a lamp.

Important! The edge of the nail must be carefully painted.

The final stage is the application of a top (finishing gel). This is a mandatory step during which the coating is fixed, resulting in shine to the nails. Finish gel can be applied in a thicker layer than the color coating. It takes 30 seconds to dry the finish in an LED lamp, and 2 minutes in a UF lamp. Then the nail plate must be treated with a clinser (a liquid that “fights” the sticky layer).

If you follow the steps of applying varnish step by step, you can be sure that the manicure is performed correctly. It must be remembered that only when using high-quality materials will the coating last longer; you also need to read the instructions for using each product.

Note! When applying gel polish, you need to take into account that you should first paint 4 fingers of your right hand, dry them in a lamp, then do the same with your left hand. Thumbs should be painted separately to prevent the polish from running off the nail.

Once the basic technique is learned, you can try to do a manicure with different options (marble, using rhinestones, various sparkles, using manicure strips) using modern materials and tips on the Internet; even a beginner can learn this.

Today, manicure can be done not only in a salon or at home, but also in public places (shopping centers, cinemas, airports). The big advantage of a quick manicure is that it can be done at a time convenient for the client; there is no need to make an appointment in advance.

For your information! From the financial side of the issue, an express manicure procedure will cost relatively less than an analogue in a manicure salon.

Avoid household chemicals

To keep your manicure as long as possible, you need to listen to the advice of professionals:

On the day of applying gel polish to your nails, you should avoid steaming procedures, as water will make the nail soft and the polish will not last for a long time.
Do not expose nails with gel polish to household chemicals; aggressive substances can dissolve the coating.
There is no need to wear the covering for more time than required. The polish will penetrate deep into the nails and begin to release toxins, making the old coating much more difficult to remove.
You should not mechanically remove the polish yourself, as this will damage the texture of the nail, and particles of the coating may come off along with the nail. You need to use a special liquid.
Experts advise taking a break for several weeks after 4-5 applications. This time can be devoted to strengthening natural nails (using various oils, medicinal varnishes).
If your nails are thin, you should refrain from applying gel polish and strengthen them first.
A polish that contains pearl or glitter will last longer than usual.
If the coating begins to come away from the tips of the nail, then you should not tear it off. You can apply a transparent regular varnish, this will briefly extend the life of the manicure.

Note! You don't need to know much to get a flawless manicure. You should listen to the advice of professional craftsmen, use high-quality materials and follow the step-by-step technique for applying gel polish. This way your nails will delight you with their beauty for a long time and attract admiring glances.

Most women experience brittle nails. In order for their nails to grow healthy, many representatives of the fair sex spend a lot of money on products that ultimately do not give any effect. The best remedies are nail vitamins, olive oil and proper nutrition. You can also strengthen your nails with gel yourself at home. It does not take a lot of time.

With the help of gel polish - a special coating, your manicure will be flawless for two weeks. Today, this product will surprise few people, because it is used by masters in many nail salons. Not everyone knows that such a coating can be applied at home. Many girls believe that buying gel and a lamp is not profitable, and besides, such a manicure requires special skills. In fact, all the products + a lamp cost no more than two trips to the salon, and you can learn how to apply gel polish to your nails very quickly. There are no difficulties in the technique of covering nails with gel. The main thing is to follow a certain sequence.

-2017

Benefits of gel polish manicure

Gel polish has become widespread among women due to many advantages, which include:

good color stability;
presence of bright shine;
simplicity and ease of application;
drying speed;
safety for nails.

A manicure done using gel polish will last on the nails for two to three weeks (provided that the technology has been fully followed). During this time, the nails will retain their appearance and shine, while eliminating the possibility of cracks and delaminations.

Materials and tools for manicure with gel polish

In order to properly apply gel polish you need:

Manicure set for preparing nails for applying gel;
Polishing buffer for plate leveling;
Degreaser;
Primer;
Transparent gel base;
Color gel;
Transparent top coat for gel polish, optionally matte, with glitter, etc.;
Lint-free wipes for removing the residual layer;
UV lamp with a power of 36 watts for drying the coating.

This list includes the required minimum of materials so that the instructions for applying gel polish in one tone are fully followed. Depending on the type and complexity of the design, you may need several shades of gel polish, as well as sparkles, rhinestones, stickers and other nail design elements. To perform a French manicure, which is very popular among fashionistas, you will also need stencils.

The home manicure technique consists of several stages.

Stages of applying gel polish at home

After purchasing a set with all the necessary components for performing a gel manicure, you can get down to business. The lessons learned and master classes will help ensure that the technology is performed exactly:

The gel coating is applied only after the preparatory manicure, because the varnish coating should not get on the cuticle;

After this, the nail plate is carefully polished with a special buff having an abrasiveness of 220-260. With this step, the topmost layer is removed;

Without degreasing your nails, the polish will not last long. Pharmacy boric alcohol or a special product is suitable for this;

Next, you need to dry your nails using a primer, which will also prepare them before applying the base coat;

Apply the base coat. It will make the final connection between the nail and the varnish;

The layer must be cured with a UV lamp within 2 minutes. This will ensure the reliability of the entire manicure;

Let's start applying the color coating. It is performed in 2 stages with mandatory lamp drying for 3-4 minutes after each layer;
Then the manicure is completed with a top coat. Drying this stage in a lamp takes 2 minutes;

After this, you will be able to notice the appearance of a sticky layer on your nails. A degreaser applied to a cotton pad will help remove it.

HOW TO EXTEND THE WEARING LIFE OF GEL POLISH

In order for the gel polish to stay on your nails for the longest possible period of time, you need to follow some simple rules:

After performing a manicure, you must leave your hands dry for at least two hours.
You shouldn’t put extra stress on your nails, because they have a tensile strength that may not be enough.

How to remove and remove gel polish

This manicure can be removed using cotton wool soaked in special. solution, which are applied to the nails, then wrapped in foil and left for several minutes. The varnish softens and peels off under the influence of the product.

You may be able to remove it easily, since it comes off completely in the form of a film, but unpleasant hooks and irregularities may remain on the nails, which will spoil the appearance of the nail.

Unlike regular varnish, after completing a manicure, you can immediately get on with any business without fear that the coating will be scratched or torn off. Therefore, for those who have such a problem, gel polish is an excellent solution.