Handmade corrugated paper flowers instructions. How to make huge peonies: a master class for beginners. Made from thin paper

How to make flowers from corrugated paper with your own hands

I would really like to recommend you the most an exquisite Dutch rose shop wherebuy roses Almaty as easy as pie. It's so convenient. You can go to the website and use the clear interface of the online store. Choose and order the number of gorgeous flowers you need and a huge selection of bouquets. We are waiting for you!

Further, continuing the topic: all these options are labor-intensive and require certain technical skills. You can make original flowers from corrugated paper with your own hands in literally 30 minutes. It always looks fresh and creative, plus you can add easy recycling.

Such jewelry has several important advantages that make it a leader:

minimum amount of money spent on necessary materials;
flowers can be made so realistic that they are almost impossible to distinguish from real ones;
the material can be purchased at almost any stationery or craft store;
extraordinary beauty can be achieved without specialized tools and complex circuits;
quick disposal is especially important when decorating large halls or rooms;
will be an excellent gift or decorative element for any celebration;
This type of decoration can be made even by a child.

Even with all the abundance of DIY methods, flowers made of corrugated paper have been and will be at the peak of popularity. A wonderful way to express yourself and realize your wildest fantasies.

Preparatory work

Before you begin the mystery of flower production, you must first of all equip yourself with all the necessary arsenal in advance. Corrugated paper is best purchased in rolls rather than sheets. The roll contains a large enough footage, which is enough for a whole heap of buds, flowers and petals.

It is recommended to select paper in more natural shades, unless, of course, as planned, the final work should look natural and natural. For buds, leaves and stems, you should take several flowers, in this case, you can play with the shadows. Then the flowers will look more “alive”.

For the stem you need to take a thin pliable wire, a floral sleeve or any other materials.

You will also need thick cardboard for cutting out blanks, glue and sharp scissors. Not necessary, but you can prepare fishing line or strong silk threads and a breadboard knife.

It is best to work in good lighting, this can be either natural light or fluorescent lamps.

If there are small children or animals in the house, it will be safer to work on a high table rather than on the floor.

Flower making process

At the initial stage, many needlewomen are faced with the question: how to make flowers from corrugated paper and where, in fact, you need to start. Of course, each craftswoman has already developed her own technology and some little secrets. However, nothing is impossible for those who want to reach the heights of professionalism.

The most complex technologies always come down to the simplest steps:

First, you need to draw the necessary templates on cardboard. For a more realistic flower, you should prepare several templates of different sizes and slightly different shapes.
The more paper petal blanks there are, the better. In this case, we can recall the beautiful rose flower, which consists of a huge variety of petals of various sizes.
After the cardboard blanks are ready, you can start cutting them out of paper.
Once all the petals are prepared, you can begin creating the flower itself. To do this, you will need to take 5-7 of the smallest petals and tie them tightly at the bottom. This way a tight bud is formed. For strength, you can glue the bottom part with glue.
After the bud is ready, you should carefully attach each petal separately, slightly stretching the upper edges. By performing these actions, the petal is given a natural wavy shape.
After all the petals have been collected into a finished flower, it can be safely “planted” on the stem.

The stem, like the flower, should look natural. This can easily be achieved with regular wire and green paper. It is necessary to measure the required piece of wire or floral sleeve and decorate it with prepared corrugated paper, fabric, or even paint it with acrylic paints. Then attach leaves and thorns if the flower implies their presence. The finished flower is “settled” on the stem using glue. Since the wire and the floral sleeve are movable, they can be given absolutely any shape and bend.

How to make realistic peonies.Bystep by step instructions

Peony is a magical flower that is traditionally a symbol of purity and love. A cute bouquet can be an excellent gift for a wedding or birthday of a beloved friend. Peony flowers in nature are quite large in size. For a bouquet of flowers you don’t need to make a large number of heads; 7 pieces will be enough.

If you want to achieve a shade close to the natural color, you can take snow-white or milky paper and give a few strokes of pink, orange or peach acrylic. You can make delicate peony flowers from corrugated paper with your own hands in just 20-30 minutes.

At the first stage, you should carefully cut out rectangles according to the template and slightly round them, thereby giving a natural roundness to the petal.

To make one peony you will need to prepare 10 strips for small petals, 10 strips of wider paper for large petals and several strips of different sizes of green paper for making leaves. To give a realistic shape to the peony, you need to cut the petals slightly oval with a small stem, and the leaves slightly pointed towards the top.

After all the shapes are cut out, with careful movements the petals need to be slightly stretched in width and height, until the petal is visually closer to the natural one. Next, give the petal a convexity on the outside, thus giving it some volume.

When stretching petals or leaves, it is necessary to avoid using nails, otherwise the tenderness and fragility will be spoiled by unwanted lines.

Thus, gradually, the petals are stacked on top of each other in layers. When the flower has been collected, its base should be secured with thread, fishing line or glue. Since a peony is a carelessly disheveled flower, you can safely tear some of the petals of the finished product slightly and then stretch the edges again.

In total, it will take about 25 petals to make one peony. Sepals are made from green paper. It is necessary to prepare about 10 green leaves, after shaping, wrap them around the finished peony.

To make the flower more voluminous and lush, at the initial stage a round candy or a formed foil ball is placed in the core.

It should be remembered that natural flowers in nature do not have perfectly smooth edges and lines, so the less neatness there is in the bud, the better.

Master classfor making delicate lilies

The royal lily flower is sensuality combined with majesty. Volumetric flowers made of corrugated paper always attract attention. This is not only a good addition to the main gift, but also a great decorative element for any holiday or event.

Using the example below, we will describe step by step how you can make a wonderful lily from ordinary corrugated paper.

To work you will need:

paper in light lilac, yellow and green shades;
watercolor, gouache or acrylic paints;
glue or glue gun;
wire for the stem, approximately 30 cm;
brush and sharp scissors.

If the paper is on a roll, then you need to cut a strip 7 centimeters wide from it. From the resulting piece, cut into small rectangular pieces, which should be given a rounded shape to the lily petals. Then, the edges need to be stretched a little with your fingertips, for greater naturalness, and slightly curled with scissors or a regular pencil. Make a depression in the middle of the petal, thus giving it a natural roundness.

When the petals are completely ready, the magical process of transformation begins. To do this, you need to mix brown and dark lilac colors and use the resulting tone to draw natural dots at the base of the petal. For greater naturalness, the dots should be thicker at the base and almost disappear towards the middle.

The stem is made from wire. The required piece of wire is cut and decorated with a thin strip of green corrugated paper. Before wrapping paper around the wire, it is recommended to stretch it properly. This is done to ensure that all unnecessary stripes and folds disappear.

At any edge of the finished stem we make a pistil and form a stigma using hot glue. To be convincing, you should paint this place with green paint.

The stamens are made from yellow paper. A small even square is cut from the roll. We cut strips along its entire length, but leave the base solid. Then you need to twist each strip with twisting movements and treat the tip with a drop of hot glue. After all the work is done, dip the prepared stigmas in semolina, paint with acrylic or gouache in a brown-chocolate shade and let dry.

Lily leaves have a rather elongated shape. You need to cut long rectangular strips of green crepe paper, slightly stretching and folding them. We glue the stamens to the pistil and add three lily petals to the finished structure, placing them slightly above the tips of the anthers.

After this, glue three more petals over the joints of the previous petals and twist the edges of the finished flower again.

The final stage is “installing” the finished lily on the stem, adding petals and securing with drops of glue.

Corrugated flowers with candies

Every needlewoman, having reached a certain level, wants to do something extraordinary and memorable. Not a single holiday or special event is complete without sweets and flowers. Modern craftswomen have decided to combine these two components into one and call this direction suite design.

Flowers made of corrugated paper with candies came into fashion not so long ago, but they have already managed to win over quite a large number of the public with their originality and creativity. Today, through your PC, you can view photos and videos of a huge number of master classes on making an unusual bouquet. A detailed step-by-step description will help you turn all your bold ideas into reality. The main thing is not to be afraid to experiment. Only in this case will you get bouquets that are worthy of decorating not only birthdays, but also weddings.

To make a bouquet you will need chocolates, preferably round and wrapped. This will greatly facilitate the task during the formation of a flower bud. You can take paper of absolutely any color, here you can give free rein to your fantasies. Squares should be cut out of the corrugation, rounded and petals formed by pulling and stretching the finished fabric.

The next step is to cut out squares of baking film. The candy is wrapped around the finished square and a small tail is left at the bottom, which is then wrapped with a beautiful thread or gold-colored ribbon. We gradually “wrap” the finished workpiece, layer by layer, with petals, immediately giving it the shape of a natural flower. You must try to ensure that the first layers completely cover the candy, but the subsequent ones may already be half-open.

After the bouquet has been completed, it can be decorated with satin ribbons, various laces, beads, stones or rhinestones. Such an original gift will definitely leave behind indelible pleasant memories.

To create a spectacular bouquet, you don’t have to stop at just one type of flower. These can be a wide variety of combinations of daisies, roses, daffodils, poppies, tulips, orchids and so on.

Giant size flowers

You can make large flowers from corrugated paper with your own hands for any occasion. Such decoration will always look festive and unusual. Flowers of a delicate shade can decorate a romantic party or wedding celebration. Huge, but at the same time fragile, as if made of porcelain, can add even more atmosphere to the holiday.

For a children's birthday party, products in bright and flashy colors are suitable. Not only will they become indispensable for decorating the festive photo zone, but also photo sessions. Magnificent life-size flowers made of corrugated paper will be able to “greet” guests at the entrance. With such a huge bouquet, you can properly greet your beloved wife from the maternity hospital or give it to your girlfriend.

Step-by-step process for making a large rose:

on thick cardboard, draw a petal template in the shape of a heart and a drop;
cut out 15 large hearts and 5 petals in the form of droplets from paper according to the template;
each cut petal should be well stretched up and to the sides, giving it a natural and natural shape;
for droplet-shaped petals, you need to beautifully wrap the edges using a pen or pencil;
For the heart-shaped petals, we make wavy bends using a pencil only on the sides;
for the stem you will need a piece of ordinary soft wire, which must be decorated with floral tape or green corrugated paper;
the formation of a bud should begin with small petals, after gluing them to the stem with a drop of glue;
after the base is formed, first the droplets and then the hearts are glued to it one by one;
from a long strip of green paper, a sepal is cut into small cloves;
The finished sepal is fixed around the base of the bud, secured with green adhesive tape or a drop of glue.

At this stage the rose is completely ready. In order to make leaves, cut out oblong shapes from green corrugated paper. After this, place the edge of the decorated wire in the middle of the finished sheet, after moistening it with glue. Then fold both halves of the sheet so that the wire remains hidden inside the petal, and bend the remaining edges of the paper back.

At the final stage, the leaves are attached to the stem with adhesive tape and decorated with corrugated paper or a few strokes of acrylic paint.

Giant flowers made of corrugated paper can magically turn the most ordinary holiday into an enchanting celebration.

Making flowers from corrugated paper with your own hands is quite difficult, but if you follow the master classes that craftswomen share with each other, you can cope with the task effortlessly.

In this review, we will introduce you to this original type of needlework, talk about the intricacies of choosing the ideal materials and share ideas on how to make flowers from corrugated paper and how to incorporate them into the interior.

A bright bouquet of corrugated paper is a wonderful interior decoration

What is corrugated paper and how is it used in decoration?

If ordinary paper appeared many centuries ago, then its corrugated sister is much younger. It became widespread in the second half of the 19th century in England. At that time, linings for hats were made from thin, soft and pleasant to the touch paper with fine folds.

Over time, this material went beyond sewing and became in demand among needlewomen engaged in applied arts and decoration. Today, crepe and corrugated paper is excellent for children's creativity, used for craft lessons, suitable for decorating rooms and even creating carnival costumes.

DIY corrugated paper flowers for beginners: application ideas

Recently, such a decoration trend as making flowers from corrugated paper has become particularly popular. These original crafts are used both for special occasions and as decoration for residential premises. What use can they find in the interior?

Flowers made from corrugated paper are very popular for decorating the hall during weddings, corporate parties, birthdays and other events. They are used to make arches for outdoor wedding ceremonies, used during photo sessions, and included in garlands. By the way, recently many brides and groomsmen are refusing bouquets of natural flowers, preferring paper ones.

Advice! Delicate white buds can be used to decorate the room in which the celebration will take place after the christening.

Corrugated paper has also found application in interior design of showrooms, exhibition centers, beauty salons, hand-made stores, and so on.

Flowers skillfully made from paper look just like real ones

Living spaces can also be decorated with original artificial paper flowers. Here are some examples of their use in the interior:

The simplest solution is to use them as a replacement for natural plants in pots, vases and flowerpots. The main advantage of this alternative is that paper flora (unlike natural ones) will please the eye much longer, because it does not wither.

You can also create a stylish and incredibly delicate decoration with your own hands from corrugated or crepe paper - rose topiary.

Make voluminous balls of flowers and hang them on a transparent thin fishing line from the ceiling - such a decoration will give the room more tenderness and sophistication. A ball of flowers made of corrugated paper will make the interior elegant, and besides, such decor will not be superfluous.

Small paper flowers on branches

Decorate the Christmas tree with flowers? Why not! Make small inflorescences and branches from the buds and decorate the New Year's beauty with them. Small roses made of corrugated paper, which seem to have bloomed on the branches of an evergreen beauty, would be appropriate here.
The children's room will sparkle with all the colors of the rainbow if you attach small bright corrugated flowers to its walls.
You can decorate a tablecloth, table napkins and chair covers with artificial paper buds. In this case, the best solution is massive peony flowers made of corrugated paper, which will elegantly add style.

Idea! An original idea for window decoration - curtain ties with simple flowers made of corrugated paper. As a base, you can use an ordinary store-bought magnet with a ribbon or cord, on top of which your hand-made decor is attached.

Before Christmas, you can decorate the front door with a traditional wreath of spruce or pine branches, generously complementing it with flowers made of corrugated paper.
Above the newlyweds' bed in the bedroom, you can hang a larger paper heart made of rose buds.
And finally, the most daring interior decorative step is the use of large flowers made of corrugated paper (as tall as a person or taller) in the room. They can stand close to the wall or form an entire forest, evenly distributed over the entire area of the room. Hand-made autumn flowers from corrugated paper in an exaggerated design can perfectly decorate a large hall for a themed celebration.

As you can see, if you set a goal and include bouquets of flowers made of corrugated paper in the interior, you can make it truly original and unique.

Moreover, such an interesting and exciting activity will surely appeal to children. It’s worth trying to make flowers from corrugated paper with your own hands, but for children it is better to choose the simplest options. They will definitely be delighted with huge flowers as tall as they are and with small roses. When choosing a master class, you need to be guided by the fact that children have not yet mastered complex manipulations, but they will be able to make a simple flower like a tulip with their own hands from corrugated paper.

How and where to choose corrugated paper?

When purchasing this material, you need to take into account several main requirements for it. Corrugated paper should be strong, plastic, hold its shape well, not tear, not fade from contact with glue, and have rich colors.

You can purchase it at specialized retail outlets that sell handicraft materials, in art stores, as well as on the Internet. It is believed that corrugated paper from Italy can boast of the best quality.

Learning to make flowers from corrugated paper for beginners

The simplest buds can be made together with children. They are also suitable for those who are just beginning to master the basics of this skill. You will need:

corrugated paper (for this type of flowers you can use one colored sheet or several);
sharp and thin scissors (manicure scissors are suitable);
toothpick;
glue;
cardboard circle.

First of all, you need to cut out 12 circles from paper.

Advice! It will be more convenient to use a cardboard template, a coin or any other flat round object.

Next, we make petals from the resulting blanks: to do this, one edge needs to be slightly sharpened by gluing it together.
We begin to attach the finished petals in a circle to a small round piece of cardboard: first we paste over its outer edge with five petals, then we glue four more inside and the last three in the center.
The final touch is making the core. To do this, you need to cut a strip of corrugated paper about 3 cm wide and fold it lengthwise. Then, at regular intervals, cut it so that a small fringe is formed, which needs to be slightly fluffed. Wrap the fringe strip around the toothpick in a spiral to create a fluffy center of the flower, secure it with glue and attach it to the existing petals. Ready! Such flowers made of thin corrugated paper will become a real decoration of any interior.

Corrugated paper daisies

Making daisies is no different. All you need for this:

Corrugated paper white and green.
Yellow yarn - wool or wool mixture.
Sewing threads are yellow.
Wire.
Paper clip.
Scissors.

First you need to make the middle of the flower. To do this, wrap the yarn around two fingers - 15-20 turns will be enough. Remove it from your fingers and rewind it with thread, tie it. Then cut with scissors so that you get a thin pompom.

Place the core on the wire and, starting from the base, wrap it with green corrugated paper cut into strips. Wrapping to the end is the stem of the future chamomile.

Making petals:

Cut out a rectangle measuring 14 x 4 cm.
Fold in half and secure in place with clamps.
Cut one side, going 3.8 cm deep. The distance between cuts is 0.8 cm.
Shape the petals – it should be slightly rounded.

All that remains is to make the sepals. To do this, cut out a rectangle measuring 1 x 4 cm from green corrugated paper. Cut it into cloves and wrap it around the base of the flower, secure with glue.

Corrugated paper chrysanthemums

To create these fall flowers you will need:

Corrugated paper. Its color depends on what kind of chrysanthemum you are creating.
Green and yellow corrugated paper.
Wire.
Scissors.
Glue gun.

Creation sequence:

We will make a bunch of stamens from yellow paper. To do this, you will need a strip measuring 7 x 13 cm. The sheet needs to be folded in half along the length, and then again along the width. Next, make cuts across the entire area of the workpiece. After this, wrap the workpiece around the wire and secure it with glue.
We create petals from paper of the required color. To do this, take a strip 20-30 cm in size and 5-7 cm wide and make cuts along the entire length, not reaching the edge 1 cm. In order to make a blossoming bud, you will need 3-4 such strips. Now you need to make the workpiece realistic - to do this, each “needle” needs to be twisted between your fingers. Do this with all the cut sheets.
All that remains is to wrap them around the stamens. In this case, the latter should be slightly lower than the petals. Secure each circle with glue.
Wrap the wire with green paper.
Make petals and secure them to the wire.
All that remains is to fluff the flower - and it is ready.

Using the same pattern as chrysanthemums, you can create your own carnations from corrugated paper. Only at the stage of cutting the flower petals should they be made not thin and triangular with teeth, as in a carnation bud.

Corrugated paper rosebud

Oddly enough, but a rosebud using this technique is perhaps the easiest to make. To do this you will need wire, red and green paper, and glue. First you need to cut a rectangle 6 x 7 cm, and it is very important that the workpiece is not skewed.

Now you need to round the top at the corners and make a pointed top in the center. You need to make a blank for the bud from the wire - to do this, bend it around your finger with a small margin to secure it on the axis, and fix it.

Place a wire ring in the middle of the paper blank and put a piece of cotton wool inside. Now use the right half (upper part) to wrap the wire and cotton wool, while the paper needs to be slightly stretched. Now the same fold, but on the other side. Twist the lower part of the future bud tightly around the wire.

All that remains is to make the leaves. To do this, you will need a 6 x 9 cm rectangle of green paper. Cut lengthwise into unfinished triangles with sharp tips. Wrap the bud with the blank and secure it. For greater realism, twist the sharp edges into strands with your fingers.

DIY irises

You can also make irises from corrugated paper with your own hands, but this task is not the easiest, so you should start it with at least minimal experience in working with the material.

To work you will need:

Corrugated paper is blue or purple.
A sheet of plain paper, maybe cardboard.
The wire is thin and thick.
Glue gun.
Yellow fluffy knitting thread.
Scissors.
Type tape or green corrugated paper, cut into strips.

The first step is to prepare templates for the flower leaves. They will have 3 types:

Pointed, like a cherry (it's also the smallest).
The middle one is teardrop-shaped.
The largest one is round.

Next, for the workpiece you need to cut out three petals of each size. In this case, they need to be placed so that maximum stretch can be achieved along the lateral contours. The finished petals need to be carefully stretched along the edge.

In order to be able to give the desired shape, a thin wire should be glued to each petal, and a small tail should be left at the base.

Creating yellow fluff on the largest leaves:

Finely chop the thread.
Apply glue to the area from the base of the petal to the middle. You should get a stripe.
Sprinkle it with fluff on top.

All that remains is to collect the flower. To do this, first of all you need to arrange the smallest petals together, then the middle ones in the spaces between them, and then the largest ones. Twist the edges of the wire together and wrap it with green tape. Decorate the base with green paper.

DIY spring flowers from corrugated paper

Spring is the season when everything blooms, but you can bring this season into your home by making a bouquet of spring flowers. This can include tulips, bell flowers made from corrugated paper, made by yourself, and many others that you can think of.

Their manufacturing scheme is similar to those presented above, and all you need is to take a close look at the originals. After all, corrugated paper is such a pliable material that will withstand a wide variety of experiments.

Flowers made from candies and corrugated paper: a delicious and beautiful gift

At the very beginning of spring, you really want to please yourself with beautiful snowdrops. But did you know that they are listed in the Red Book? Therefore, it is better to replace live primroses with artificial ones - for example, make your own bouquet of corrugated snowdrops with sweets.

A bright, memorable gift - a bouquet of paper flowers with sweets inside

To do this we need the following:

chocolates wrapped in foil;
white corrugated paper;
green corrugated paper;
long toothpicks;
thin sharp scissors;
glue ("Moment" or "Second" will do);
flower basket;
a piece of foam plastic, the same size as the bottom of the basket;
green mesh, chiffon or organza;
artificial grass.

For each flower you will need four strips (4 x 16 cm) of white crepe paper. Each strip is twisted in the center and folded in two.
In the center of the candy you need to stick a toothpick and glue white stripes of petals twisted in half to it. Next, we process the stem: we wrap a toothpick below the candy and petals in a spiral with a strip of green corrugated paper and fix it with glue.
Let's prepare the leaves. To do this, cut out a square (15 x 15 cm) from green mesh, chiffon or organza and slightly round its corners. Next, carefully pierce the center of the square with scissors and insert the snowdrop stem into the resulting hole. We position the fabric at the desired height and, using glue, form a small wave that will act as the bend of the leaf.
We place polystyrene foam on the bottom of the basket and place flowers on it. We decorate the finished composition with artificial grass. A beautiful, original and tasty decoration is ready!

Let's summarize

Flowers made from corrugated paper can not only decorate the interior, but also help discover your talent for needlework!

Making flowers from corrugated paper with your own hands is not so difficult. This is an excellent way out of a situation when you need to congratulate a loved one on some holiday, but you want to do it in an unconventional way. Flowers are always relevant - on March 8, and on birthdays, and on Valentine's Day. But on the eve of such celebrations, not everyone can afford to purchase fresh flowers, since prices for them increase 2-3 times. Creative people know a simple and economical way out of the situation, let's try to create flowers from corrugated paper with our own hands.

Today we offer you to familiarize yourself with several instructions for making various flowers, from which everyone can choose the most suitable master class or use several to create an entire flower arrangement.

Let's start simple

corrugated paper in a roll (you can have different colors, but always one of them is green - for the stems);
PVA glue;
scissors.

Take a roll of corrugated paper of the same color as the flower. Unwind a small piece and cut it off. Then you should twist the ribbon from one edge and squeeze it with your fingers. Using this technology, you should wind the flower bud, but squeezing only at the bottom, and leave the upper edges free. The bottom side of the craft should end up looking like a thin stick. When you get a lush flower from corrugated paper, you need to wrap a piece of that color, folded in half, around the bottom edge and secure it with glue.

Now you should make a stem from green corrugated paper. To do this, we also cut off a piece of tape (up to 10 cm) and, starting from the base of the flower, twist it, but not adding volume, but lengthening the piece. The result should be such a full-fledged flower.

The resulting corrugated buds will resemble: pink - sakura or apricot flowers, and if you use red material - carnations, yellow - dandelions. Thus, using the master class described above, you can end up creating a multi-colored composition of flowers.

Making paper roses

Roses are the favorites of most representatives of the fairer sex. Therefore, let’s get acquainted with how to make flowers from corrugated paper of this type.

We take a scarlet corrugation and cut off 25 cm. The piece should be folded in half along its entire length, stretching the fold slightly. After this, the fold must be converted into hems by twisting. Having reached the edge, the fold should be folded further with your fingers. Now all that remains is to form a rosebud from the resulting base, but it is not recommended to make it dense; it is better to make it rounder by straightening the petals a little. When the workpiece resembles a real rose, the base must be secured with thread. All that remains is to finish the stem.

You can make a rose using another master class. To do this you will need the following:

corrugated paper (pale pink, green and hot pink);
green wire;
scissors;
glue gun;
brush or pencil.

First of all, we take on the bright pink corrugated paper, which will need a piece of 8x14 cm. This piece needs to be folded in half, then use scissors to adjust the upper edge, giving it roundness. After this, the edging of the workpiece should be stretched and unfolded - you will get the inner rose petal (base). To make the rose more voluminous or original, you can wrap candy in the base and secure it with threads. The tip should be cut into a tooth shape. You immediately need to secure the stem, which is made of wire and inserted into the bud.

Now let's create the remaining petals. To do this, you need to fold bright pink corrugated paper into 4 layers and cut out 4 petals at once. After this, using a pencil or brush, the edges of the petals need to be given a natural shape. Then we attach it to the base.

We will make the last row of the rose from pale pink corrugated paper measuring 10x16 cm. Again we fold the material into 4 layers, cut out 4 petals, but with large indentations along the outer edge. Then we give the shape with a pencil and fix it step by step around the already more magnificent base.

An elegant and natural base of the flower can be made from green corrugated paper. To do this, you will need a small piece from which you need to cut out the deep cloves of the stem. We cut off a small piece from the same material, and use a gun to attach the teeth, wrapping them with an even green piece.

Corrugated paper roses (video)

Giant flowers

It would seem, what else can be made from corrugated paper?

In fact, when working with such a universal material, choosing a floral theme, you can create not only existing types of flowers, but also come up with your own options.

For example, huge blue roses or small sunflowers of unconventional colors.

Large flowers made of corrugated paper look quite original and beautiful. Even one such craft will be suitable for a present. So, let's try to make one by one such giant flowers from corrugated paper as poppies and peonies.

To make poppy seeds you will need a whole roll of corrugated paper, which should be cut into 6 equal parts. After that:

The parts need to be placed on top of each other, folded like an accordion 10 cm wide.
We fix the lower part with threads.
Round cuts should be made along the top of the workpiece.
Now all the petals need to be unfolded, separating them from each other, and then give the flower volume.
We will make the base from black corrugated paper. You need to wrap any pieces in this material, forming a ball. Secure the base of the ball with tape.
We will make the stem from thick wire, wrapping it in green paper. If desired, you can cut out and secure the petals.

As planned, we will now consider a master class for creating a huge peony. To do this, it is first recommended to make a sketch (template) of this flower. On the piece of paper we draw a wavy round shape, similar to a cloud. Next, the master class involves performing the following actions:

Cut out the template along the contour.
We attach the template to the corrugated paper, trace it with a pencil and cut out the blank. To make large flowers from corrugated paper, you will need at least 10 such blanks.
All the blanks need to be stacked on top of each other, then make a hole in the middle.
You need to pass the wire through the resulting hole, bending the end, and then thread it into the adjacent hole. The ends of the wire must be fixed to obtain a blank for the stem.
Now the topmost piece needs to be bent towards the center, and then do the same with the remaining sheets. You should get a lush bud.
All that remains is to decorate the stem. To do this, carefully wrap the wire with green crepe paper. Finally, fix the tip with glue.

Now that you know how to make flowers from corrugated paper, and different ones, you can please your family and friends with original gifts or decorate your own home with them.

Large flowers made of corrugated paper (video)

Reviews and comments

(No ratings yet)

Victoria 11/21/2016

What a gorgeous rose you have made. I didn’t even know that such miracles could be made from corrugated paper. My daughter is very interested in fakes and loves labor lessons at school, so I’m constantly looking for something new for her on the Internet. Today we will sculpt such flowers with her, of course we will start with small ones, I hope we will get our hands on them and we will also be able to make such beautiful roses, they are certainly beautiful.

Nadezhda 11/28/2016

God, what a beauty. Some flowers are as if they were alive. I had no idea that making paper flowers is relatively easy. The most important thing is time and desire. Of course, you will have to tinker with the first one, but the result is worth it. We have a child's birthday coming up soon. Now I know exactly how to decorate a room besides balloons. All that remains is to find beautiful paper.

Masha 08/09/2017

I made similar flowers and it worked out well. It is very easy to do, and most importantly quickly; with the help of such a bouquet you can perfectly decorate a room. A good alternative to store-bought artificial flowers.

Add a comment

You always want to decorate the most significant day in some special way. Ready-made decorations are quite expensive, and if you decorate a large room with them, it will cost a pretty penny. Today, there are quite a large number of handicraft methods. Flowers can be made using quilling, beading, cold porcelain and even wool felting. But all these options are labor-intensive and require certain technical skills. You can make original flowers from corrugated paper with your own hands in literally 30 minutes. It always looks fresh and creative, plus you can add easy recycling.

Such jewelry has several important advantages that make it a leader:

minimum amount of money spent on necessary materials;
flowers can be made so realistic that they are almost impossible to distinguish from real ones;
the material can be purchased at almost any stationery or craft store;
extraordinary beauty can be achieved without specialized tools and complex circuits;
quick disposal is especially important when decorating large halls or rooms;
will be an excellent gift or decorative element for any celebration;
This type of decoration can be made even by a child.

Even with all the abundance of DIY methods, flowers made of corrugated paper have been and will be at the peak of popularity. A wonderful way to express yourself and realize your wildest fantasies.

Preparatory work

For the stem you need to take a thin pliable wire, a floral sleeve or any other materials.

You will also need thick cardboard for cutting out blanks, glue and sharp scissors. Not necessary, but you can prepare fishing line or strong silk threads and a breadboard knife.

It is best to work in good lighting, this can be either natural light or fluorescent lamps.

Important! If there are small children or animals in the house, it will be safer to work on a high table rather than on the floor.

Flower making process

The most complex technologies always come down to the simplest steps:

First, you need to draw the necessary templates on cardboard. For a more realistic flower, you should prepare several templates of different sizes and slightly different shapes.

The more paper petal blanks there are, the better. In this case, we can recall the beautiful rose flower, which consists of a huge variety of petals of various sizes.

After the cardboard blanks are ready, you can start cutting them out of paper.

Once all the petals are prepared, you can begin creating the flower itself. To do this, you will need to take 5-7 of the smallest petals and tie them tightly at the bottom. This way a tight bud is formed. For strength, you can glue the bottom part with glue.

After the bud is ready, you should carefully attach each petal separately, slightly stretching the upper edges. By performing these actions, the petal is given a natural wavy shape.

After all the petals have been collected into a finished flower, it can be safely “planted” on the stem.

How to make realistic peonies.Bystep by step instructions

At the first stage, you should carefully cut out rectangles according to the template and slightly round them, thereby giving a natural roundness to the petal.

peonies - process

Important! When stretching petals or leaves, you must avoid using nails, otherwise the tenderness and fragility will be spoiled by unwanted lines.

Then the process of “folding” the bud begins. To do this, take several of the smallest petals and wrap one tightly in the other. During wrapping, you must ensure that each subsequent layer overlaps the seam of the previous layer. Thus, gradually, the petals are stacked on top of each other in layers. When the flower has been collected, its base should be secured with thread, fishing line or glue. Since a peony is a carelessly disheveled flower, you can safely tear some of the petals of the finished product slightly and then stretch the edges again.

In total, it will take about 25 petals to make one peony. Sepals are made from green paper. It is necessary to prepare about 10 green leaves, after shaping, wrap them around the finished peony.

To make the flower more voluminous and lush, at the initial stage a round candy or a formed foil ball is placed in the core.

It should be remembered that natural flowers in nature do not have perfectly smooth edges and lines, so the less neatness there is in the bud, the better.

Master classfor making delicate lilies

Using the example below, we will describe step by step how you can make a wonderful lily from ordinary corrugated paper.

To work you will need:

paper in light lilac, yellow and green shades;
watercolor, gouache or acrylic paints;
glue or glue gun;
wire for the stem, approximately 30 cm;
brush and sharp scissors.

At any edge of the finished stem we make a pistil and form a stigma using hot glue. To be convincing, you should paint this place with green paint.

After this, glue three more petals over the joints of the previous petals and twist the edges of the finished flower again.

The final stage is “installing” the finished lily on the stem, adding petals and securing with drops of glue.

Corrugated flowers with candies

A chic bouquet is carefully formed from ready-made flowers. This is done in different ways. You can “plant” each flower separately on a pre-prepared wire; you can use skewers, a foam ball, a plastic bottle or polyurethane foam. After the bouquet has been completed, it can be decorated with satin ribbons, various laces, beads, stones or rhinestones. Such an original gift will definitely leave behind indelible pleasant memories.

To create a spectacular bouquet, you don’t have to stop at just one type of flower. These can be a wide variety of combinations of daisies, roses, daffodils, poppies, tulips, orchids and so on.

Giant size flowers

Step-by-step process for making a large rose:

on thick cardboard, draw a petal template in the shape of a heart and a drop;
cut out 15 large hearts and 5 petals in the form of droplets from paper according to the template;
each cut petal should be well stretched up and to the sides, giving it a natural and natural shape;
for droplet-shaped petals, you need to beautifully wrap the edges using a pen or pencil;
For the heart-shaped petals, we make wavy bends using a pencil only on the sides;
for the stem you will need a piece of ordinary soft wire, which must be decorated with floral tape or green corrugated paper;
the formation of a bud should begin with small petals, after gluing them to the stem with a drop of glue;
after the base is formed, first the droplets and then the hearts are glued to it one by one;
from a long strip of green paper, a sepal is cut into small cloves;
The finished sepal is fixed around the base of the bud, secured with green adhesive tape or a drop of glue.

At the final stage, the leaves are attached to the stem with adhesive tape and decorated with corrugated paper or a few strokes of acrylic paint.

Giant flowers made of corrugated paper can magically turn the most ordinary holiday into an enchanting celebration.

Paper flowers are not only pleasant to see, but also to make with your own hands. In addition, they have a couple of advantages over their natural counterparts - they are much more affordable and durable. By the way, having learned how to make flowers with your own hands, you will never be at a loss if you suddenly need:

Wrap gifts;
Decorate the house for the holiday;
Festive;
Make props for a photo shoot;
Make gifts for loved ones, friends, colleagues or the child’s teachers/caregivers;
...or just update the interior.

From this material you will learn how to make flowers with your own hands from corrugated, colored or tissue paper (tish). You will find 4 step-by-step master classes with pictures and templates, as well as a selection of 70 beautiful photos and useful videos.

Application ideas

Later we will tell you about techniques for making flowers from paper, but first we suggest you be inspired by photo examples of their use.

Bouquets of paper flowers can not only be placed in vases, but also “planted” in cute flowerpots. To do this, they must first be stuck into a base of polystyrene foam or floral foam. Next, the base should be decorated with dry moss or small pebbles.

Paper flowers in vases, pots or just buds without stems will decorate March 8, Easter, Valentine's Day or a wedding.

Quiet paper flowers

How to design napkins for a festive table setting? Simply place small flowers on top or arrange them into rings with colorful buds.

And here is another attribute for a festive table decoration - holders for guest cards.

You can decorate your house for a holiday or just like that with garlands or cascades of flowers.

To make such a garland of flowers with your own hands, use ribbon petal blanks (see MK No. 1 below, step 3) and skip the steps of making the stem and pistil

Take a sheet of cardboard or canvas on a stretcher, glue the buds to it and frame it. Voila, the panel is ready! You can hang it on the wall or give it to a friend.

You can order a beautiful photo zone from the masters, or you can set aside a couple of days and make it yourself, saving a lot. The second master class provides instructions on how to make large flowers with your own hands.

Photo zone with flowers for a child's birthday

Large paper flowers can also be made for a photo shoot.

Crepe paper flowers make luxurious wreaths. They can be used as an attribute for a themed party and also for a photo shoot.

Even the simplest gift packaging will become elegant if you decorate it with homemade paper buds (see master class No. 1 and No. 4). In this selection of photo examples you can get a couple of original ideas.

Master class No. 1 - Flowers made of corrugated paper (basic instructions)

DIY flowers made from corrugated paper can look surprisingly lifelike. Although at some stages of their manufacture you will have to tinker a little, even a beginner can cope with the craft the very first time.

This selection of photos shows examples of paper flowers that you can make yourself by following our step-by-step master class.

To work you will need:

Corrugated paper of the desired shade (for buds);
Green crepe paper (for stems, leaves, sepals) and/or crepe paper tape;
Floral wire (wire wrapped in green, sold in craft stores, on Aliexpress) or wooden skewer/wire/newspaper tube/knitting needle;
Scissors;
Glue (hot glue gun is best);
Pencil.

Master Class

Although almost any flowers can be made from corrugated (creped) paper - from roses to tulips - the principle of their manufacture is approximately the same. The main difficulty is to make the right petals: give them the desired shape, volume, size, choose the color of the paper, guess the quantity.

By following our master class, you will master the basic skills of making flowers from corrugated paper and will be able to make roses, peonies, tulips, lilies, daisies, chrysanthemums and dahlias.

Step 1. So first we need to make the stem. If you use floral wire, then simply cut it to the required length: a stem about 30 cm long is suitable for making a bouquet, and for, say, a boutonniere, 15 cm is enough.

If you don’t have special wire, it doesn’t matter. An excellent stem can be made from a wooden skewer, any flexible wire or newspaper rolled into a thin tube using a knitting needle/skewer. At the last stage, your improvised stem needs to be wrapped in green corrugated paper (we'll talk about this below).

Step 2. Since the pistils and stamens of all flowers are different, and sometimes there are none at all, there are many techniques for making the “cores” of artificial flowers.

To make a chamomile or daisy, you will need the core of a bud in the form of a yellow button. Poke a ball of cotton wool onto the stem, then wrap it in a couple of yellow squares cut from corrugated paper, wrap the base of the “button” with green corrugated tape and finally secure the tape with glue.
To make a rose core, you need to cut out a 9x9 cm square from colored corrugated paper, fold it into a triangle, then connect the two corners of the triangle to its vertex. Next, wrap the resulting torch-shaped blank to the top of the stem with green corrugated tape and secure it with glue.

The following photo illustrates blanks for making cores of different colors.

Do you want to give a bouquet of flowers as a sweet gift (see photo below)? Use candy for the center! To do this, simply plant it on the top of the stem and secure it with tape/paper tape.

Step 3. Let's start making petals and forming a bud. This stage is the most important, so it should be given more attention. Depending on what kind of flower you want to make, choose one of two working methods.

Single petal method (suitable for roses, peonies, lilies and other flowers with a small number of petals)

As the name suggests, the method involves forming a bud one by one, petal by petal.

The first step is to draw and cut out a template of the desired shape and size (see templates below).
Then the corrugated paper is folded several times, a template is applied to it, the outline of the template is outlined with a pencil, and then cut out with scissors. As a result, you will end up with several blanks at once. Repeat the procedure several times to get the desired number of petals.

These templates will help you navigate the sizes, shapes and number of petals. Keep in mind that the length of rose, peony and tulip petals should be approximately 9-11 cm, and lily - 13.5-15.5 cm

Next, all the petals need to be given volume and bend: stretch a little and bend inward/outward, if necessary, wrap the ends with a toothpick/skewer (for example, for a rose). To understand exactly what shape the petals need to be given, just look at a photo of a real flower and experiment a little.

Corrugated paper easily stretches, curls and takes the desired shape

To make a peony, you will need to make 35 petals and a stem with a button. How to make petals: based on the photo, cut out the petals of the desired shape, then stretch them slightly and bend them inward, gather the base of the petals a little. The central petals need to be glued lower, and the rest – higher. When the flower is ready, slightly tuck the tips of the petals inward

To make a rose, use 5 small and 7 large petals (see template above). Round the petals just below the middle, and twist the upper edges onto a skewer/toothpick outward. Attach the small petals to the core first, and then the larger ones.

To make a lily, use 5 petals (see template above) and a pistil with stamens from red and white corrugated paper. Fold the petals in half lengthwise to form pleats, then unfold them. Give the petals a bend by turning them outward at their widest point.

Tulips made from corrugated paper are the easiest to make. You only need six petals, they need to be slightly rounded and the ends pleated

When all the petals are ready, start gluing them one by one to the stem, and then on top of each other, keeping a checkerboard pattern. A hot glue gun is best for this purpose. If there are not too many petals, then instead of glue you can use the same green corrugated paper tape (see photo).

Tape method (suitable for daisies, daisies, carnations and other “layered” flowers)

The difference between this technique is that the petals are cut out not individually, but from a strip of corrugated paper, when the workpiece becomes like a fringe. In this case, the petals acquire volume and bending (sometimes several layers at a time) only after the fringe is attached to the stem.

Cut a strip of corrugated paper to the desired length and width, then fold it in several layers and cut out the petals of the desired shape (see template below).

Wrap the resulting fringe tightly around the pestle and secure it with green corrugated tape, tape or glue. If there are too many layers, then to prevent the bud from slipping out of your hands, the fringe should be cut into several parts.

The central petals of the chrysanthemum need to be wound around the pistil quite tightly, the rest - looser and slightly higher

The carnation is made from three stripes (see template). The first strip just needs to be tightly gathered into a bundle and secured with tape/tape. The second and third strips need to be wrapped around it, holding and aligning the lower part of the bud. Next, the bud is fixed with corrugated tape or glue. Finally, pull the petals outward to give the carnation a rounded shape.

To make a dahlia, start winding the blank just below the pistil, but then wind the petals, rising higher and higher. Shape the petals into a round shape, curl the tips inwards slightly and finally pinch the tip of each petal to form a fold.

Give the petals a bend if necessary.

Now that the flower is almost ready, it needs to be supplemented with sepals and leaves on the stem. To do this, you need to cut out leaf blanks in the appropriate quantity, shape and size (refer to the photo or templates) and simply glue them in the right places.

The sepals are glued under the bud, then they are given a bend and volume.
To make leaves for some types of flowers, such as tulips or lilies, you just need to cut out the blanks and glue them to the stem. However, some flowers have leaves with stalks and they need to be done a little differently. Cut out the leaves (with a small margin for attaching), then glue them to a small piece of wire, wrap the wire in green paper, then glue the cutting to the stem. If desired, paper leaves can be replaced with artificial ones.

Hurray, your corrugated paper flower is almost ready! All that remains is to wrap the entire stem with a strip/ribbon of green corrugation, starting with the sepals and simultaneously wrapping around the place where the leaves are attached. At the beginning and at the end of the stem, the winding must be fixed with glue.
To make your handmade flowers even more realistic and last longer, cover them with melted beeswax and let them dry.

The following video tutorial will help you better understand how to make flowers from corrugated paper with your own hands.

Master class No. 2 – Large rose made of corrugated paper

Large hand-made flowers are good for decorating photo zones, ceilings and walls at special occasions (for example, at a wedding or birthday). They can also become spectacular props for a photo shoot.

To work you will need:

A roll of corrugated paper of the desired color 50×200 cm (1 roll/1 flower);
A roll of green corrugated paper (for the stem and sepals);
A4 paper (you can use office paper);
Hot glue gun;
Scissors.

How to make large paper flowers:

Step 1. First we will make the stem. Take a sheet of white A4 paper, place a pencil on the corner, then roll the paper into a tube.

Step 2: Unroll the crepe paper roll completely. First fold it in half, then double it again, then fold it again... is it a rectangle? Now fold it in half to make a square measuring approximately 25x25cm.

Step 3. Cut the folded paper into a square at all folds using scissors. You will get two identical stacks of square sheets, from which we will then cut out the petals.

Step. 4. Fold each stack in half. From the first rectangular stack, cut out a half-heart shape, as shown in the diagram below. From the second stack, cut the same shape, but smaller.

Unfold the stacks to make petals like this.

Step 5. Twist the ends of the petal with a pencil or pen, and stretch the petal itself a little and bend it inward.

Step 6. Give the petal an even more rounded shape by making two folds at its bottom and securing them with hot glue.

Step 7. Let's start forming the bud. Roll one of the small petals around the stem quite tightly.

Step 8. Start gluing on the remaining small petals, following a checkerboard pattern. When the small petals run out, continue to grow the bud with larger petals. In total, your rose will “overgrow” 15 petals (+1 petal in the center of the bud).

Step 9. Fold a square sheet of green corrugated paper (25x25 cm) diagonally to form a triangle, then fold the triangle in half 2 more times. From the resulting multi-layered triangle, starting from the fold line (!), cut out the shape as in the picture below. When you straighten the cut out piece, you will get a quatrefoil.

Step 10. Make a small cross-shaped cut in the center of the quatrefoil (see picture above), through the resulting hole, put it on the stem up to the bud, then glue the leaves with hot glue.

Step 11. Hurray, our big rose is almost ready. All that remains is to wrap the stem in green paper. To do this, you need to roll it into a roll, then cut off an approximately 2-centimeter wide piece from the edge (that is, the same as if you cut a piece from a roll). Now unravel the resulting tape and wrap it around the stem, securing the upper and lower ends with glue.

From the following video you will learn how to make large flowers from paper with your own hands.

Master class No. 3 - Hyacinths made of colored paper (suitable for children's creativity)

These hyacinths look like they were made by a quilling expert. In fact, even a child can make such paper flowers with his own hands! Making the first hyacinth will take some time, but you will spend no more than 5 minutes on each subsequent flower.

To make such a bouquet of flowers with your own hands, you will need a little more than half an hour.

To make paper flowers you will need:

Colored paper or not too thick cardboard (for buds);
Green paper (for stems);
Scissors;
Ruler;
Pencil;
Glue stick;
Knitting needle or wooden skewer.

Master Class

Step 1. Cut a strip of approximately 21x2.5 cm. If you are using colored A4 paper/cardboard, then you just need to cut the sheet crosswise.

Step 2. Stepping back 1 cm from the top edge, draw a line along the strip with a pencil using a ruler. Next, using scissors, cut your workpiece into strips approximately 5-7 mm wide, not reaching the previously drawn line. You will end up with something like a fringed ribbon. Try to cut the paper into even strips parallel to each other, but don’t worry about mistakes, because they won’t be noticeable when folded.

Step 3. Using a knitting needle or wooden skewer, carefully roll each strip into a log until it stops. Make sure the pencil line is on the back of the paper.

Step 4. Now let's work on the stem. From green paper (cardboard will not work!), cut out a strip 21x2.5 cm.

By the way, if you want to save time, just use green straws as stems.

Step 5. Twist one corner of your strip diagonally, then lightly go over the entire strip with a glue stick (see photo) and finally roll the entire strip into a thin tube.

When you're finished, it will look something like this:

Step 6. Now it's time to roll the bud and glue it to the stem. To do this, take the bud blank (a strip with curls) again and lubricate its base from the wrong side with glue.

Step 7. Hurray, your first paper flower is almost ready, all that remains is to add leaves to the stem. To do this, cut out a piece of green paper about 2.5 x 8 cm and fold it lengthwise into an accordion about 1 cm wide.

Assemble the accordion and, stepping back about 1.5 cm from the bottom edge, give it a leaf shape using scissors.

When unfolded, your workpiece should have 3-4 leaves and look something like the photo.

Step 8. Apply glue to the bottom of the leaves and place its corner about 5 cm below the bud and at an angle, as shown in the photo below. Next, wrap the workpiece tightly around the stem.

Well, that's all, the hyacinth is ready! Repeat the process using different shades of paper to make a paper flower bouquet.

DIY paper flower bouquet

Master class No. 4 - Paper roses (express method)

This master class will come in handy when you need to make flowers with your own hands super-quickly, easily, on a budget and in large quantities.

To work you will need:

Any pretty paper (even book pages will do);
Green paper for leaves;
Glue (thermal glue is best);
Scissors;
Pencil.
Wooden skewers (needed if you want to make a bouquet).

How to make paper roses:

Step 1. Cut out a square piece of paper approximately 12x12cm.

Step 2: Draw a circle on your square and then draw a spiral inside it. It doesn’t have to be flawless for the roses to have texture. If you wish, you can make it completely wavy, then the rose will have pronounced petals.

Step 3: Cut out your circle, then cut along the spiral line. As a result, you will get something like a spring.

Step 4: Take the outer end of your “spring”, roll it into a log (loosely), then begin to twist the entire ribbon around it. Hold the flower from below to prevent the paper from unraveling.

Step 5. When you reach the base (the inside of the blank), glue the bud to it with enough glue. Voila, the first flower is ready!

Step 6. If desired, the rose can be supplemented with leaves. They are cut out into any shape and glued.

Step 7. If you want to make a bouquet, then glue the buds onto skewers or a newspaper/paper tube. It is advisable to wrap the stems in green paper tape.

Here are a few more ideas for making flowers with your own hands, which you can implement with the help of our master class.

Wedding garland of flowers made of colored paper and book pages