Hardware cosmetology for the face at home. Home cosmetology devices: what is in demand? Professional care equipment

THE ABC'S OF WEAVING

DO YOU NOT HAVE PAPER WEAVING TECHNIQUES YET?

OR MAYBE YOU'RE HEARING IT FOR THE FIRST TIME?

YOU HAVE COME TO THE ADDRESS!

Stay on this page and you won't regret your time.

Having studied this small, collected from various sources Master Class You will master the technique EASILY AND QUICKLY paper weaving and you can safely move to a new, more complex and exciting level, weaving truly professional things.

Preparing the paper vine

First you need to prepare the material. It may be pure paper, but practice shows that weaving from it is quite difficult due to its density. Of course, if you have newsprint that is used in printing houses, then this will be an ideal option, since the absence of printed text on it makes painting the product much easier. But more on that later. So, prepare newspapers in large quantities. Using a sharp knife, cut strips no more than 10 centimeters wide. To begin with, you can practice on shorter strips and only after gaining some experience move on to longer ones. At the same time, it is much easier to make a product from long strips than from short ones.

Place a strip of paper in front of you. We apply a knitting needle to it at an acute angle. Next, we tuck a corner of the newspaper under the knitting needle and begin to twist the sheet as tightly as possible.

Don't be alarmed if one end ends up a little thicker than the other. This is normal, although there shouldn't be a big difference. To prevent our tube from unraveling, you should use glue and secure the corner of the sheet. Thus, you need to prepare at least 50 straws. The quantity depends on the size and complexity of the product.

Further actions depend on how exactly you are going to paint the finished product. You can paint the sticks before weaving. But there are some nuances here. The wrong varnish will make them hard and brittle, resulting in a rough looking vase or box. It is recommended to use acrylic varnish for artwork.

A basket made of tubes, on which the text is clearly visible, also looks beautiful. You can paint the product after manufacturing, especially if it is not of a particularly complex shape.

Making the bottom

The base of the product can be absolutely anything. First, let's try to make a vase with a solid bottom. To do this, just select a dense material, for example, cardboard, and cut two circles from it. Why two? And in order to hide the ends of the tubes in the bottom, which will be the stands. Next, we place one circle and, using a pencil, make marks where the posts will be fixed. If this is a future vase, then you can make the stands at a wide distance from each other. Some types of weaving, for example, oblique, allow you to weave on 5-6 stands. Glue the ends of the sticks and immediately apply the second circle. A solid square bottom is made in the same way. But still, the wicker bottom looks especially attractive. This is where the weaving of a basket or box most often begins. In this case, you need to cross several tubes, for example 5-7. Next, we take one tube and begin to braid it from the center in a circle, alternating the position of the main sticks either above or below the working one. We extend the tube as necessary. How to do this will be described in the next section. Thus, we create a circle of the required diameter. In order to understand how to weave a round bottom using other techniques, you only need to watch the video tutorial once.

Rarely, but still sometimes a square bottom is woven. This is a rather complicated process and you need to master it only after you have made a couple of products using a lighter technique.

Tube extensions and weaving

Some crafts, such as a vase, may be quite tall, requiring frequent extensions of the paper vine. To facilitate this process and to ensure that the finished product has the most attractive appearance, you should learn how to connect the tubes correctly. As already mentioned, the paper vine blank has ends of different thicknesses. This is what allows you to seamlessly connect them. We take a stick with a thin end and a second one with a thick one. Now we simply insert one into the other with gentle movements and scroll a little. To secure the joint, you can lubricate the thin end with glue. It is often recommended to cut off the thick end before connecting the vine. But at the same time, you will get a sharper transition, since the thickness of the wall of the stick will be much greater than if it was not cut. That is, in our case the transition will be smoother, and after painting it will become completely invisible.

Next, we will try to weave with the simplest weaving, that is, one strip. To do this, take our bottom and attach a stick near one of the posts. Before this, you need to choose the shape that you will braid. This can be a can, bottle or box, if the basket is being woven. We lift each end of the racks up and, if possible, secure them with clothespins. Next, we begin to braid our racks with a free vine. Alternatively, a basket is woven in the same way using two sticks. In the future, you can experiment and alternate weaving with one or two tubes.

The rope is more difficult to weave. In this case, two tubes are used. They are located on different sides of the rack and at the same time intertwined with each other in the space between the racks. But in the photo this weaving looks especially interesting, and a basket made using this technique is durable and holds its shape perfectly.

Almost all types of weaving are continuous, that is, each previous row goes into the next.

Some products have a lid. It weaves in exactly the same way, only with a lower height.

After the product is ready, it needs to be painted and, if desired, applied with a pattern. This can be painting, ribbons or decoupage. Each technique has a detailed manual that will allow you to master it. Next, the product is varnished.

What can be made from paper vine

At first glance, it seems that a limited number of products can be made from newspaper tubes. But as soon as you master this technique, and you no longer need instructions while working, you will be able to create your own weaving methods and, accordingly, new crafts. We can only give advice on how to weave this or that product. In order to create a basket, it is enough to weave the shape with classic weaving. Next, a pair of tubes are woven on both sides, on the basis of which a handle is woven. For practice, you can weave a laundry basket or a chest for sewing supplies.

The first one is larger, but the second one can have internal partitions. A vase is especially often woven from newspaper tubes. To create a unique image, you can make an openwork edge. To do this, you can simply weave a braid or master a more complex method of weaving an openwork, but for this you will need a diagram.

To decorate the room, pots made of tubes are used, as well as all kinds of glass holders, stands for pots and hot dishes. But that's not all. A paper bell, strollers, hearts and balls, photo frames and even animals and birds look great.

Once you look at an example of products made from newspaper tubes, you simply cannot ignore this technique and will definitely master it, creating many useful and beautiful things

Master class on weaving from newspaper for beginners

We have been weaving from newspapers for a long time, putting them on display. And when they ask how to do it, we send them to other sites using links. When we were next weaving a pot for flowers, I decided that we should have our own master class on weaving baskets.

The sticks are twisted, then I connect them in two pieces so that they are immediately longer.

I roll them out with a rolling pin to make it easier to slide them under each other.

There must be an odd number of sticks.

I begin to braid with that stick, of which there are more in the row, we have 5 pieces.

Like this. Holding it with your hand and leveling it so that you gradually get a circle.

I also gradually level out the rays, like those of the sun.

The size of the circle must strictly correspond to the bottom of the shape that we will braid. Otherwise, there will either be a gap or an ugly transition.

Then I insert the form (I have a can of washing powder) and lift the sticks up, and so that it does not move, you need to put a weight inside (I have a pot of soil). I secure the sticks with an elastic band (I used to do it with tape) for it to be more convenient. I align all of them at the same distance. Yes, before that I build up all the sticks with denser and thicker sticks.

And I braid it. It’s better to choose a form that has a slight protrusion at the top, so that the sticks touch this protrusion and you can insert the sticks freely and quickly. (But this is for the first 5-7 rows) And then you can remove the elastic band.

This is what happened

We close the edges. Alternately, we bend the sticks one after another inward.

You can see it here.

Then, using a crochet or knitting needle, draw several rows from the inside and insert a stick behind them

Then cut off the excess.

To get curly braids, you need to alternate the shapes that we braid and also secure them with either an elastic band or tape.

Well, then we paint it at our own discretion. Whoever likes it.

When I was making MK, I thought, maybe I’m doing it in vain, why “reinvent the wheel”, so I omitted such details as making tubes and their size. I'm correcting myself now. My sheet size is half a magazine sheet.

Here you can see it with me. 27 cm by 9 cm. This sheet is from the World of Books catalogue. I have a lot of them. Sheets from the cover or inserts that are thicker go the same size onto the tubes, with which I extend the tubes of the sides, which are tied vertically with an elastic band. That’s how I put it, it seems clear.

I twist on this knitting needle, size 1.5 mm (on which socks are knitted)

Torsion process.

Place a drop of PVA glue on the corner and roll it between your fingers.

Here on the white tubes you can see that the ends of the tube should not be the same (one is thinner, the other is thicker), so that it is convenient and quick to connect them. I drip 1-2 drops of glue into the thick end (it is better to have glue in a bottle with a tip) and I connect it to the thin end (there is no need to be sorry, push 3 cm or more and therefore you don’t have to wait for it to stick together, but continue to weave, the tube will not come off.

Here is the finished product, which was number 18.

In the comments, many write that the tubes are either very hard and do not bend, or soft and break. Therefore, I decided to add a photo on twisting the sticks. This picture shows how to twist correctly (at an angle of 45 degrees). Such a stick turns out to be both strong and flexible. And the ends are one narrow and the other wide.

This twist is also not correct. Low strength, breaks when stretched.

Now we have our own master class and we will not send beginners to other sites. It seems like I added the missing details. I paint with acrylic varnish, three layers of color at once. It doesn’t smell, you can paint it right on the kitchen table (covered with newspaper). I came across the colors (oak, maple, walnut, pine (the lightest), you can mix them. Some people paint first with water-based emulsion or acrylic paint so that the letters are invisible, but then with colorless varnish. And I like it so naturally. Well, I think I’ve answered all the questions, you’re welcome. And I’ll try to make a tutorial on weaving the frame. Yes, more. I can see the edge processing at No. 13-14. figuratively with a rim, then the sticks are simply wound, leaving a loop, through two vertical sticks under the third down inside.

“Today we’ll talk about how to use an old newspaper. After all, many people don’t even know that newspaper makes very nice souvenirs in the form of vases and pots.

If this is your first time hearing about this, then I’ll tell you about weaving from newspaper tubes for beginners step by step.

In order to create a beautiful vase from newspaper vine, we will need the following tools:

1. stack of old newspapers,
2. bottle or jar,
3. PVA glue,
4. tassel,
5. knitting needle,
6. thick cardboard,
7. ruler,
8. acrylic paints (you can use one, for example, white),
9. scissors,
10. as well as a hot gun, but you can do without it.

As we work, we will use the simple technique.

We take a ruler and use it to divide the newspaper spreads into long strips, each of which should be about 10 centimeters wide.
Now take a knitting needle (you can also use wire).

We begin to wrap our strips around the knitting needle, while the knitting needle should lie slightly obliquely relative to the paper.
The remaining edge of the newspaper needs to be coated with glue and fixed. We'll get a tube. About thirty of these tubes need to be made - they will be the material for weaving our product.

After all the tubes are ready, take a bottle or jar of the desired size (this is at your discretion) and place it on the cardboard. We trace the bottom with a pencil and cut out two identical circles.

Now you need to prepare the tubes for the frame. To do this, one end of the tube needs to be slightly flattened (about 3 centimeters from the edge).

Now you need to apply glue to one of the cardboard circles and glue newspaper tubes to it with flattened edges. The newspaper vines need to be distributed so that they are at the same distance from each other. To do this, you can make approximate measurements in advance and mark them with a pencil on cardboard. Glue can be applied to cardboard using a hot gun. If there is none, then we coat the bottom with regular PVA and use a press.

The glued newspaper rod needs to be lifted up and secured with an elastic band. Now we have the base for weaving ready.

Now you need to take one newspaper tube, flatten its end, fit it to the bottom first, and then glue it.

We will place this tube behind the nearby frame tube on the right side; it should wrap around the outside of the frame tube.

Now we will alternate - we will clasp the frame tubes from the outside, then from the inside, and thus complete the first row.

If you run out of vines for weaving, you need to attach another prepared one to it. This is done simply - insert another into one newspaper vine (the one that ends) (as if we were screwing it in).

Attention, when we start weaving the second row, you need to insert a jar or bottle (what you took as a basis) and continue weaving.

Thus, we must weave all the rows. That is, we weave until we get the required height.

After the last row is woven, you need to cut the edge of the newspaper tube obliquely and bring it inside the basket to the limit.

The edge of the newspaper tube must be fixed with glue.

The first frame tube on the right side needs to be cut off, but at the same time leave a tail (3-4 centimeters), spread it with glue and bring it inside the braid.

We also cut the second tube, which is on the frame, coat it with glue and tuck it inside.

Next we decorate the basket. To do this, you need to apply acrylic paint to the inside of the basket with a brush, then paint the outside part. Let's wait until the paint dries a little and paint the product a second time.

The bottom of the basket can be painted three times and allowed to dry.

The decorative basket is ready!

Now you know how to weave newspaper tubes for beginners and can safely start making similar decorative items. For example, you can weave a vase, pot or bottle mold, which will add a little variety to your interior.

Weaving baskets from newspapers. Final master class.

We cut the working tubes diagonally and coat them with glue.

We secure it with a clothespin for better fixation; you can place polished cardboard between the tubes and the clothespin so that there is no trace of the clothespin left.

Finishing the edge, the easiest way.

We bend the vertical post towards the next one, make the second bend so that the distance between the folds is equal to the distance between adjacent posts.

We cut the rest of the stand diagonally, grease the cut end with glue and insert it using a knitting needle next to the next stand. We continue to perform in a circle.

It is difficult to imagine an interior in a country or ecological style without a wicker item. But where is the vine, and where are we, residents of megacities? Fortunately for the townspeople, designer Peter Clarke figured out how to weave from newspaper tubes everything that is woven from wicker and straw.

Weaving newspaper tubes for beginners is not difficult. You will not need any expensive materials or special tools, and you will develop your weaving skills very quickly. You just have to start, and very soon you can become the owner of an elegant coffee table woven from newspapers.

How to roll tubes from newspapers?

In order to twist the tubes, you will need:

• PVA glue.

The newspaper sheet needs to be cut lengthwise into 4 parts. Take 1 strip, lightly wet your finger in glue and Start rolling from the corner at an angle of approximately 30° in relation to the long side of the strip. Each braider weaves differently. Some people roll the tubes like rolled-up cigarettes—on the fly; others roll them away from themselves on a smooth table surface. Many craftsmen twist tubes on knitting needles. Find the method that is most convenient for you. Glue the end of the finished tube with PVA.

What should the tubes look like?

For beginners, weaving newspaper tubes may seem difficult, because the tubes do not immediately turn out smooth and uniform. Don't be upset if the tube widens towards the end. It is even more convenient to weave with such tubes, and they are easy to extend by inserting one into the other. Evenly twisted tubes are needed only for small panels and frames.

How to paint tubes?

Before weaving newspaper The tubes can be painted with wood stain or food coloring. It is necessary to dry by laying the tubes on a flat surface. It is better to paint the finished product with paints that are not completely absorbed into the paper, otherwise it will crumble when weaving.

Weaving from newspaper tubes for beginners

To understand how to weave from newspaper tubes, try starting with a tray, vase or box. To avoid the hassle of weaving the bottom, take a sheet of thick cardboard and cut out 2 bottoms to the desired shape. On one bottom in a circle at a distance of 2-3 cm, glue the base tubes, like diverging rays. Glue the second bottom on top.

When the glue dries, bend the base tubes upward. Place the working tube across, sometimes behind, sometimes in front of the base tubes. Continue until you are happy with the height of the side.

You can try making “windows” like handles. It is not difficult.

Tuck the ends of the base tubes inside the weaving. This is enough to finish it, but if you want, you can also weave a braid from newspaper tubes to decorate the sides of the basket.

You can glue the braid and cover the joint with a strip of newsprint. The finished product must be thickly coated with PVA glue and let it dry. Be careful; when wet, the product softens and may warp. To give greater strength, repeat this treatment several times. A completely dry product can be painted and varnished.

If you are a beginner, first learn how to twist tubes well and try to make something very simple - for example, from magazines.

Videos from handicraft sites suggest different methods of weaving from newspaper tubes. But, unfortunately, not everyone knows where to start and how to improve their skills, so they quickly abandon their favorite activity. Today, weaving from newspaper tubes is very common. Enterprising needlewomen even make money by selling wickerwork. The advantage of a hobby is that it is inexpensive. To begin with, only newspapers and PVA glue are enough, but for the durability of the compositions, different types of dyes, glue, varnish and other additional tools are also used. Please note that if you master the skill of weaving newspaper tubes, you can save on household items and gifts for friends. Manual labor is much more valuable, especially if you master all the techniques.

Let's learn together how to weave different objects from newspaper tubes, improving each time and learning new secrets of craftsmanship.

Weaving techniques

Weaving from newspaper tubes looks like wicker weaving. But it has become a thing of the past due to the long preparatory process: you need to know where, when and how to collect vines, processing methods and other secrets for storing products. This type of creativity is not suitable for city residents. A newspaper is another matter, since it is always at hand and what is written quickly loses its relevance.

By the way, if you master the craft, you can weave anything you want out of newspapers. You just need to stock up on materials and patience. Although the process itself takes no more time than the usual knitting.

For weaving, you can use not only black and white newspapers, but also glossy magazines, advertising leaflets, and old A4 wallpaper. But hard pages are still more suitable for decorating frames, vases, mirrors, clocks and other objects that are boring with everyday life.

The durability of the product depends on the thickness of the tube. If it is empty inside, the chance of destruction of the product increases many times over. To obtain the material of the same size, use a knitting needle or a long iron rod. A dense base is tougher to work with and really resembles a vine in terms of strength.

To make dishes, you need to cut strips of newspapers no more than 4 cm wide. The thickness should not exceed 6 mm

To make dishes, you need to cut strips of newspapers no more than 4 cm wide. The thickness should not exceed 6 mm. It is important to find the right paper, otherwise the plate will look sloppy.

The method of rolling tubes into a plate is quite simple. The main thing is to stock up on perseverance, patience and material of the same size. They need to be wound in a spiral until we get the canvas of the desired size. Try to connect the tubes in such a way that the bobbin does not fall apart due to careless movement. During the winding process, some craftsmen place newspaper tape directly onto the PVA, but in this case you risk ruining the shape of the product, which will be very difficult to correct.

A more convenient way to create a plate is to wind newspaper tubes without glue. Then, by gently pressing your fingers, the desired shape is formed. Only after this the product is primed and decorated.

Using the same technology, vases and bowls with high edges are formed. But they are done in several stages. Each part must be screwed separately and glued together.

Newspaper tube weaving is based on traditional wicker weaving. Currently, it has gained great popularity, because this material is always at hand, and using your imagination, you can create beautiful crafts from newspaper tubes. Master classes on creating crafts for beginners will help with this. Once your hand is “stuffed,” you can begin to create more complex products.

Clean printing paper is better suited for weaving. It is soft and colors evenly. If it is not possible to find such paper, then you can use sheets of ordinary newspapers to create original crafts from newspaper tubes. You can work with office paper, but it is quite thick, and this is inconvenient.

Basket

• newspaper or magazine sheets;
• cardboard;
• knitting needle or wooden skewer;
• PVA glue;
• scissors;
• ruler;
• brush;
• pencil.

Cut the newspaper into squares measuring 10 by 10 centimeters (longer tubes will require larger squares).

Place the knitting needle on the corner of the sheet and wrap the paper tightly around it. Remove the knitting needle. To prevent the tube from unwinding, coat the edge of the newspaper with glue before twisting. Carry out this operation with all sheets of newspaper.

Cut 2 identical circles from cardboard for the base of the basket. The volume of the future craft depends on the diameter of the circles.

Glue 8 newspaper sticks onto one cardboard circle as shown in the photo.

Glue the second circle on top. This workpiece should be placed under a press for 10-20 minutes.

After this comes the most important stage - weaving. You need to lift one tube from the workpiece vertically and glue the tube to it horizontally, as shown in the photo.

This tube must be led behind the nearby frame vine so that it goes around it from the outside, and the next tube from the inside. If the vine with which we are braiding ends, then we take another tube and, as it were, screw it into the edge of the last vine, and continue to weave.

Covering the frame tubes from the outside and then from the inside, weave all the rows until you get the desired height of the basket.

When the last row is made, cut the vine tube at an angle, coat its edge with glue and bring it inside the basket as far as it will go. Also cut the frame tubes, coat them with glue and tuck them inside the craft.

To make a handle you need to weave 2 tubes together. To prevent them from unraveling, it is better to glue them together. Place the edges of the handle inside the basket and secure with glue.

If desired, the finished basket made from newspaper tubes can be painted and decorated with decorative flowers, beads, and decoupage.

Hat

Required materials and tools:

• newspapers;
• scissors;
• glue;
• Bowl.

Make 10 long tubes from newspaper (you can see how to make them in the previous master class).

Fold 8 tubes crosswise, as in the photo.

Connect the remaining 2 tubes together and place them behind a horizontal stack.

Weaving is carried out using 2 tubes at once using the “rope” technique. Place one tube under the base of the hat, the other on top, and cross each other. Do this with all ends of the base cross.

Weave the second circle using the same technique.

On the third circle, braid each base vine with a “rope”, separating them from each other.

To make the hat even and neat, we apply the weave to the convex bottom of the bowl and use it as a mold.

For convenience, we secure the vines with clothespins to the edges of the bowl. This way they won't get confused and interfere.

Continue weaving until the hat has sufficient depth.

Remove the bowl and begin weaving the brim of the hat.

Cut the vine used for weaving and bring its edges inside the craft.

Take a new tube and thread it through the loops near the base vines, as shown in the photo.

Do this with each base vine, inserting new tubes into the loops next to it.

To weave the fields, you will need one vine, which will braid each tube using the “rope” technique.

Weave until the brim is wide enough.

After this, bring all the remaining base vines inside the craft and tuck it into the cells.

Trim unnecessary ends with scissors or wire cutters.

You can decorate the hat with acrylic paints, artificial flowers, and ribbons.

Fungus

Required materials and tools:

• newspapers;
• wire;
• scissors;
• glue;
• Bowl.

For the base you need 8 newspaper tubes. In order for the fungus to keep its shape well, thin wire is inserted into the tubes. Make a square-shaped base from them, as shown in the photo.

To make the base for the fungus neat and convex, you need to place it on a small bowl. Continue to braid the vines, but now keeping to the bowl shape.

Once the mushroom cap is ready, remove the bowl. Bend the tubes so that you get a leg.

Braid the inside of the mushroom and go out onto the stem, as shown in the photo. At this stage, the leg should be slightly widened so that it does not turn out straight.

The wire at the base of the tubes will not allow the craft to unravel, so the edges of the tubes can simply be wrapped inside the fungus.

To decorate the fungus, you need to paint its stem with white paint and its cap with brown. Afterwards, the entire craft needs to be coated with colorless varnish.

Panel

DIY crafts from newspaper tubes are a great way to decorate your interior. An exclusive option is a panel.

Required materials and tools:

• newspaper sheets;
• PVA glue;
• glue brush;
• a knitting needle or skewer made of wood;
• acrylic or food paints;
• stationery erasers;
• scissors;
• strong threads;
• needle.

Progress:

Lapti

You can make souvenir bast shoes from newspaper tubes, which are considered a family amulet, a symbol of longevity and health.

Required materials and tools:

• sheets of newspapers or magazines;
• PVA glue;
• glue brush;
• a knitting needle or skewer made of wood;
• acrylic or food paints;
• stationery knife;
• scissors;
• linen thread.

Progress:

1. Lay the sheets of newspaper crosswise with the long side, bend them in half and cut them with a utility knife.
2. Wind the resulting sheet onto a pencil diagonally from the right corner so that one edge is slightly wider than the other. Apply a small amount of glue to the edge of the sheet to prevent the tube from unwinding.

   

3. Insert three tubes into each other, securing with glue. You need 5 of these long tubes.

   

4. Place the tubes according to the photo and start weaving, taking into account that you are planning a right or left product.

   



5. At the end of weaving, thread the end of the tube using a knitting needle along the entire length of the sole.
6. After the bast shoes are ready, you can paint them with water-based Oak stain, and then apply white acrylic paint. The paint is applied with a semi-dry brush in random strokes, creating the effect of antiquity.

   

7. When the paint is completely dry, coat the product with a primer. To do this, you need to mix PVA glue with water in a ratio of 3 to 2. This will make the bast shoes strong.
8. To decorate bast shoes, just use linen thread and wrap it around the edges of the bast shoes, creating an antique effect.

   

Frame

Another way to use newspaper tubes is to make crafts and decorations from the twisted spirals, such as creating an original photo frame.

Required materials and tools:

• sheets of newspapers or magazines;
• PVA glue;
• brush;
• a knitting needle or skewer made of wood;
• acrylic paints;
• scissors;
• white sheet of paper;
• cardboard.

Progress:

Tree

An original way to use newspaper tubes is to create an unusual interior tree.

Required materials and tools:

• sheets of newspapers or magazines;
• PVA glue;
• brush;
• a knitting needle or skewer made of wood;
• acrylic or gouache paints;
• scissors;

Progress:

1. Prepare the tubes.

   

2. Fasten 13-15 tubes together, wrapping them with thread and a strip of paper coated with glue. Thus, a tree trunk is formed.

   

3. Using the next tube coated with glue, wrap the formed trunk in a spiral to the required height. If the tube runs out, insert the next one into it and continue weaving.

   

4. Divide the trunk into 2 unequal parts, forming branches. Wrap each branch with a tube coated with glue.

   

   

5. Separate the branches again and wrap them. Continue dividing until there is 1 tube left in each branch.

   

6. Trim the last branches to the desired length and form curls.

   

7. Wrap the lower part of the trunk with another layer of tubes, slightly thickening it.

   

8. Cover the finished wood with a mixture of PVA glue and gouache.

   

9. After the glue has dried, coat the product with varnish and decorate.

   

Box

Required materials and tools:

• sheets of newspapers or magazines;
• PVA glue;
• felt-tip pen;
• a knitting needle or skewer made of wood;
• scissors;
• dye.

Progress:

1. Prepare tubes and a box of a suitable shape, which will be braided during the work.

   

   

   

2. First, form the frame of the future product. To do this, mark the places where the main tubes pass at the bottom of the box, taking into account that the more often they are located, the denser and stronger the weaving will be. There should also be base tubes at the corners of the box.
3. Glue the tubes according to the markings.

   

4. Start weaving the walls of the box. To do this, glue an additional tube to the base tube, which will be used for weaving. Braid the base tubes in the classic way: the first outside, the second inside, the third outside, and so on.

   

5. In this way, braid the box completely. If the working tube runs out, it is “extended” by inserting an additional one into it, smearing the edge with a small amount of glue.

   

   

6. When finished, cut the edge of the working tube at an angle of 45 degrees and hide it inside the product. Also cut the main tubes and bring them inside, fix them with a small amount of glue.

   

7. Paint the finished box with acrylic or water-based spray paints.

   

8. After the paint has completely dried, decorate the product using satin ribbons, artificial flowers and beads.

Egg

Required materials and tools:

• sheets of newspapers or magazines;
• PVA glue;
• a knitting needle or skewer made of wood;
• scissors;
• dye.

Progress:

1. Prepare tubes from newspapers.
2. Place three tubes crosswise, fixing the intersection with a drop of glue.

   

3. At the intersection, glue the fourth tube and begin weaving. Bend one tube over 2 others, take the next one and bend it over the other two, then the next one, and so on.

   

   

   

   

   

   

   Cup

   Required materials and tools:

   • sheets of newspapers or magazines;
   • PVA glue;
   • a knitting needle or skewer made of wood;
   • scissors;
   • dye.

   Progress:

   
   

   Flowers

   Required materials and tools:

   • sheets of newspapers or magazines;
   • PVA glue;
   • a knitting needle or skewer made of wood;
   • wire;
   • wrapping;
   • scissors;
   • dye.

   Progress:

   1. Prepare tubes from newspapers, paint them yellow, green and brown, wait until completely dry.

      

   2. Insert a wire into 3 short yellow tubes and twist a wooden skewer one by one, forming spirals. These will be the pistils of the flower.

      

   3. Take 2 more yellow tubes. Bend one of them in half, and wrap the second in a loop around the first and begin to braid without tightening. This will be the first petal. Also weave 2 more yellow and 3 brown petals.

      

      

      

      

   4. Make leaves from green tubes in the same way, only with a sharper bend.

      

      

   5. When all the preparations are ready, collect the flower. Fasten the pestles together with wire. Around the pistil, attach a second layer of brown petals, and then yellow ones. Using a wire, attach a stem of 3 green tubes to the flower head.

      

      

      

      

      

   6. Wrap the stem with wire for strength. Attach a leaf while wrapping.

      

      

      

   7. To hide the attachment points and wire, wrap the stem with wrapping paper.

      

   8. The flower is ready; if desired, it can be varnished.

      

   Heart

   Required materials and tools

   • sheets of newspapers or magazines;
   • glue Moment;
   • a knitting needle or skewer made of wood;
   • wire;
   • scissors;
   • dye.

   Progress:

   
   

Wicker items have been popular at all times. Only earlier they used birch bark, wicker, and willow twigs, but now they are replaced with ordinary newspaper, magazine and office sheets. Such products are coated with stain and varnish, thereby creating an imitation of the structure of wood.

This is the popular Master class for beginners will be devoted to the basics of this craft, since the information on it is scattered in pieces from various sources, and all the available lessons on weaving crafts are designed for people with basic knowledge.

Material

For weaving you will need paper, knitting needles, paint, stain, varnish, cardboard, glue. Newspapers, magazines, office and fax paper are suitable for the work. Softer tubes are made from newspaper, and thinner, elastic tubes are made from magazines and office paper.

Please note: from one newspaper spread you should get four tubes (the width of the segment is no more than 7-12 centimeters). Cut narrow strips 2-3 centimeters wide from office paper.

Experiment with different types of material, then you will get an extraordinary paper weave. You can create a wide variety of crafts using this technique - from trays and panels to animal figurines and dishes.

Craftsmen use knitting needles of different thicknesses. The selection depends on the craft: for example, for a newspaper you need a knitting needle No. 2-3, and for office paper - a stocking needle. For the base of the craft, twist thick tubes, and for the braid - soft ones.

Choose a water-based paint or stain (alcohol-based product dries quickly, but makes the tube brittle). Thin the paint with PVA glue (2:1 or 3:1). Either the product is painted after work, or the blanks are painted before the creative process begins. But the finished craft is always coated with glue and left to dry. Only at the last stage is it coated with varnish. Cardboard is used to create a finished bottom or container of the desired shape.

Paper weaving: master class for beginners

How to prepare the tubes:

The tubes should not be soft or hard; ideally, a “medium” paper weave is obtained. There are a lot of video tutorials on twisting for beginners, but without practice they are useless. For example, for blinds and panels, craftsmen specially twist hard sticks; for decorative miniature objects, they prepare thin tubes, where the width of the strip can be less than the traditional seven centimeters. You need to experiment to find your own thickness of tubes.

Please note that when cutting with a knife, nicks are formed that interfere with proper twisting. Therefore, before work, do research: try cutting two sheets of newspaper into transverse and longitudinal strips, determining which method produces fewer notches. It is from the segment with smaller notches that the tube rolls without problems.

Paper weaving: step-by-step instructions for twisting and painting

When twisting sticks, one end should be wider and the other narrower. So, when weaving crafts, a build-up occurs due to insertion, that is, a narrow corner is inserted into a wide one. If the ends are the same, then one edge is flattened, compressed and inserted.

Many artists do without glue when doing extensions; they simply insert a stick three centimeters deep into another. Other pros drop a drop of glue into a tube with a wide end, and push it three centimeters with a narrow stick.

There is also a secret how to make the twisting go faster and the weaving to be soft. Before work, newspaper tubes are laid out in a row and rolled over them with a rolling pin. It turns out that each craftsman has his own paper weaving.

Master class for beginners on painting tubes

• First way. Paint the sheets before work, then dry them, cut them into strips and roll them into tubes.
• Second way. Twist the sticks, then paint each one individually with a brush. Suitable for products that require an unusual pattern.
• Third way. You make a craft, then decorate it using weaving or randomly with a brush.

Mass painting methods

For paint you can use water emulsion, pigments, for eggs. If the color turns out to be unsuccessful, continue weaving from paper anyway. A basket, for example, can have any color, just complicate the weaving or resort to decoupage.

Secrets for working with straws

Please note that the color becomes lighter as it dries. By combining with other sticks, you create the desired pattern or paint the finished product with the desired shade. Do not dry until completely dry. Wrap the slightly damp sticks in a bag so that both ends are outside. In winter they can be stored in the cold.

When working, the sticks must be flexible, but after painting they become hard and brittle. Ideally, paper weaving should begin immediately after painting the tubes. A basket, boxes, and dishes can be made from dry painted tubes if, before work, you spray the middle of the sticks with plain water using a sprayer on all sides.

Wrap them in a wet cloth (ends outside) or put them in a bag. Prepare a large number of tubes at once, so as not to be distracted by twisting while working.

When weaving, an even and odd number of tubes are taken. It is in the side where the odd number of sticks is where the work begins. The “odd” tube entwines all the others. As soon as its length ends, grow a new stick.

Types of weaving

We've finished with the material preparations, now let's look at paper weaving. A master class for beginners on its technique is given below.

• Simple ordinary weaving. With a braiding tube, like a snake, go around each base stick. That is, it either covers the base or hides behind it. If you need to go back, the weaving goes the same way, but in the opposite direction.
• Simple weaving in rows. The pattern changes after several rows. That is, take one stick and go through a simple weave. The next tube is laid in the same way as the first. Continue this way several times. Then you shift the pattern, that is, where the base was braided, it remains free, and the next one is braided the same number of times as in the first pattern.
• Simple diagonal weave. Each tube starts with a new base stick diagonally. The result is an oblique (oblique) pattern.
• Simple diagonal weaving in rows. Just as in a horizontal pattern, you weave with several sticks, and move the new circle along the pattern.

Types of weaving

We continue to look at paper weaving (master class on creating patterns):

Weaving techniques and secrets

To keep any pattern, it is braided with a rope or a braid. Let’s take a closer look at “protective” paper weaving (we will describe it step by step using the example of a basket).

Please note that weaving the tubes starts from the thick ends from left to right. To get the desired shape, the stands are pinched to the desired object (vase, bucket, box, etc.). The finished product is generously smeared with PVA glue (with or without paint), “put on” the item of the desired shape, and dried. Then, when painted and varnished, the product made from tubes will be beautiful and durable.

Making a basket

For beginners, it’s better to start with something simple (for example, blinds, frames, panels) to train your hand in twisting the tubes and weaving them together. Then you can move on to complex paper weaving (horseshoe, heart, box, bell). Consider a master class on weaving a simple basket without a lid or handle.

To save labor on weaving the basket, use a cardboard bottom. To do this, take an object of the desired shape and trace the bottom on thick cardboard. Cut out two pieces. Decorate them right away (cover them with wallpaper, paint them, or use decoupage).

Attach the bottom half along the edge. Now glue the newspaper tubes onto it. The distance between them should not be more than 2-3 centimeters. This is the basic rule of such needlework (meaning paper weaving).

A stand for pens, a photo frame, a hat - any craft should have a distance between the posts of no more than three centimeters. The fact is that a larger gap between them leads to looseness and fragility of the product.

Continuation of basket weaving

Next, apply PVA glue to the bottom with the tubes, cover it with the second bottom, place a weight on top and leave it overnight. Now go through two rows with a “rope”, a simple interweaving of the racks. After this, place the form on the bottom along which you will weave, with a weight (the weight is needed to fix the bottom when weaving). If you immediately start weaving the walls from the cardboard bottom, you will end up with holes in the basket that will need to be decorated.

Raise the tubes up and continue working until you reach the desired height. Next, braid it up or braid it separately, gluing it to the base. The same principle is used to weave paper boxes with lids.

There is another way to weave a rectangular bottom using ribbons and newspaper tubes. This look is reminiscent of working with a rug made from paper strips. Only in this case you take not one tube, but two or three for one unit. For example, there are four groups of sticks below. Then place three sticks crosswise on them.

Place four groups of tubes on top so that their ends are between the bottom ones. Now you braid all the rows with ribbon or a soft stick. Then again lay a transverse group of sticks, braiding them with tape. Using colored tubes, you can get an original pattern.

The bottom in this case turns out to be voluminous, as if double. Then you lift all the joints and braid them with a “rope”, smoothly moving onto the walls of the product. For trays, this is the optimal paper weave. A step-by-step photo of weaving a square basket clearly shows the essence of the work. Prepare some straws and get creative.

If you have never worked with newspaper tubes, start with simple types. For example, blinds. To do this, simply twist the thick sticks along the length of one half of the window. Tie each stick with a double knot on both sides, retreating 3-4 centimeters from the edges. While working, coat the “seams” with glue.

At the top you attach a curtain ring (the blinds will be attached to them) and a loop where you can put a rolled roll if necessary. Paint the finished product and varnish it. Now you can try simple weaving on small souvenirs and move on to baskets.

Every woman wants to make her home beautiful and cozy, and in the minds of many, comfort is inextricably linked with various cute little things - vases, boxes, baskets, flowerpots and much more. But such things are not cheap, so what to do if the family budget is limited? The solution is weaving from newspaper tubes; products made using this technique are almost indistinguishable from purchased items made from wicker or rattan. Today we will tell you about weaving with newspaper tubes for beginners, the main points on how to do it step by step, show educational video lessons and tell you about famous masters of this direction of creativity.

Weaving with newspaper tubes for beginners

First of all, to weave from newspaper tubes you need to prepare everything you need - newspapers, the more the better, a knitting needle (it is needed to make the tubes themselves), a brush and paint for painting the finished product. Some paint the tubes at the very beginning, others, on the contrary, at the end. If you don’t have the right paint, don’t worry, even products made from ordinary sheets of newspaper also look impressive and unusual. We invite you to watch video tutorials on weaving from newspaper tubes, which explain in detail how weaving with newspaper tubes is done for beginners:

Master Class

There are recognized masters of weaving newspaper tubes. Among them it is worth highlighting Natalia Sorokina. She has been working in this technique for quite a long time, has her own blog on the Internet and has even published several books dedicated to this topic. In them you will find answers to all your questions, and you will also be able to choose new schemes and ideas for yourself. Now we invite you to watch a weaving master class from newspaper tubes from Natalia Sorokina:

I would also like to recognize Elena Tishchenko as a master of weaving from newspaper tubes. From her you can also watch a large number of video lessons on weaving from newspaper tubes, where her various works are presented. Newspaper tube weaving master class from Elena Tishchenko will be useful for both beginning needlewomen and those who already have sufficient experience. They tell about the initial stages of weaving and present unusual products made from newspaper tubes. We present a few to your attention:

Weaving from newspaper tubes step by step

In mastering the technique of weaving from newspaper tubes, there are several main points that are very important. Firstly, this is the ability to correctly twist these same tubes, then comes painting the finished tubes, then you should learn how to make different shapes of the bottom for your future product, then the process of weaving the thing itself, if it is a basket or chest, then the lid for them is woven separately, after that if the tubes were not painted in advance, you need to paint the entire finished item. This is what weaving from newspaper tubes consists of step by step. Weaving newspaper tubes from newspaper video lessons will help you learn how to do all this correctly:

Today you got acquainted with this type of needlework as weaving from newspaper tubes. Having mastered it, you will decorate your home, save your family budget, and in addition, wickerwork can be an excellent gift for your friends and family. Perhaps you will be so captivated by your new hobby that you will make similar things for sale, in this way any activity will also turn into a source of income. Weaving from tubes has a large number of advantages, but probably the most important one is that all the necessary materials are at hand. And as practice shows, you can make beautiful and useful things from the unnecessary newspapers that we throw away, all you have to do is start.