Plastic bottles are a familiar material, crafts from which you will not surprise anyone. Another thing is the lids, which, due to their ignorance, are thrown away by many along with the bottles. But you can make so many useful and interesting crafts from them, including mosaics, fridge magnets, wall panels and massage mats!
Plastic cork magnets
You will need:
- Covers;
- Small magnets;
- Glue or double-sided tape;
- Medical alcohol;
- Markers.
Instruction:
- Degrease the plastic cover with medical alcohol, glue a magnet inside. Draw a funny face on the front side.
- If you glue special decorative elements with a moving bead in a plastic shell to the lid, the eyes in the image will turn out to be more alive.
Mosaic from plastic corks: manufacturing rules
Mosaics made of plastic corks require more skill, which can be either an independent craft or an element of decor. Due to the strength of the material, you can decorate the country yard or the facade of the house with the product.
During manufacture, the covers are fastened together using a special adhesive for gluing polyethylene BF-2 or BF-4. For more complex drawings, it is worth making a markup on a primed plywood sheet in advance, and then draw the desired figure with acrylic paints. When the paint is dry, you can start gluing the corks with a glue gun. To make a mosaic of corks, you will need a large amount of material of different colors and some drawing skills.
If you decide to make a mosaic on the surface of the wall, the technology for its implementation is somewhat different. First you need to select a pattern or pattern that will be applied to the surface of the wall. After selecting the surface, it must be marked. When marking, set marks at the level of the height and width of the pattern. It is also necessary to divide the proposed wall into equal squares - this will help control the shape of the pattern and pattern. Additionally, you can mark the colors of the corks that will be fixed in the marked squares.
After marking, you can begin to place traffic jams. You can nail corks to the wall with the front or inside. If you decide to attach the plugs face down, you will find it difficult to clean the wall surface, as debris and dust will collect in the plugs. Fastening with the inside is convenient because after work you can mask the seams of the mosaic with a cement-sand mortar.
If the wall on which you plan to lay out the mosaic is concrete or brick, it is recommended to use special fastening compounds. The surface of the wall is plastered simultaneously with the application of covers. At the end of the mosaic, wait until it dries, then you can eliminate the shortcomings. On wooden structures, nailing is considered the best method of attachment. You can use self-tapping screws or ordinary nails.
How to make a rug out of plastic bottle caps?
You can make a massage mat out of corks quite quickly. The finished product looks beautiful, especially if you use multi-colored lids. You can get a lot of benefits from a massage mat made of lids. First, it is wonderfully relaxing. Secondly, doctors advise walking on such rugs every day for about 10-15 minutes. This improves health.
The effect of a massage mat made of covers is explained by the fact that there are a large number of sensitive nerve endings on the feet, which are responsible for various organs and systems of the body. During the massage, the whole body is charged.
You will need:
- Caps from plastic bottles;
- Awl;
- Thick and strong line.
Instruction:
- There should be approximately 10 to 15 lids on each side of the hexagonal mat. To correctly calculate their number, you need to multiply the number of covers on the 1st side by the number of sides and subtract the number of covers that are repeated.
- When you have collected the required number of parts, pierce six holes in each cover with an awl. All extreme are going to 1 strong fishing line. Then, the covers must be braided with a piece of fishing line so that they hold tightly. Thus, collect the blanks in a hexagon, securing with a fishing line.
- To make the massage mat beautiful, use multi-colored covers and lay out a certain pattern. It can be designed in advance, and then only proceed with the assembly.
Crafts from corks from plastic bottles: photo
It would seem that such a simple and primitive material as plastic caps cannot be used for creativity at all, but we will dispel this misconception once and for all, demonstrating how unique and unusual can be bottle cap crafts. Most often they are used to decorate surfaces with bright mosaics, which will perfectly complement the landscape design of your backyard in the same way as.
Crafts from bottle caps for giving
If you create mosaic crafts from plastic bottle caps, schemes you will definitely come in handy to get a beautiful and neat drawing. Often, mosaics are used to decorate paths and paths, to decorate walls in a country house, you can use this idea and create a beautiful drawing on a gazebo in a kindergarten or completely decorate a children's playground.
Once you have chosen a work surface for your creative endeavor and picked up a beautiful pattern, be it a geometric pattern or any fancy picture, you still have to gather enough material. For example, if you want to decorate a gazebo or a wall in a kindergarten with mosaics, then all parents can be involved in collecting caps. Invite everyone to put a bottle in their kitchen, in which all family members will put plastic material for a week, month or several, so that together you can collect enough elements in a shorter time than alone. To realize your creative idea, you can also contact the townspeople through social networks, perhaps you will find like-minded people who will help you collect the required number of caps so that you can complete bottle cap crafts.
Before starting work, all the material must be sorted by color, so that in the future you can quickly lay out a segment of a certain color. The picture that you want to lay out as a mosaic must be redrawn on the work surface, selecting all the segments. Before laying out the mosaic, it is necessary to paint the working segment in the appropriate color so that the gaps between the caps do not shine through. Thus, will look more neat crafts from caps from plastic bottles, photo a wide variety of works will help you make sure of this.
Plastic material adheres well to almost any surface, whether it is iron or plywood, but you have to choose the right adhesive. For polyethylene, it is best to choose BF-2 or BF-4, and if you create with a child from waste material, then you have a glue gun at your disposal. For those craftswomen who decide to lay a path in their country house with plastic mosaics, you can recommend a special solution that will fix the elements on a brick or concrete surface. But the caps on the tree can be fixed with nails, especially if you are doing gardening for the first time. plastic bottle cap crafts.
DIY bottle cap crafts
When laying out a certain color segment of the image (you can divide it into segments not by color, but by area, for example, divide the entire picture into squares), you should definitely lay out the caps tightly to each other. The gaps between them should be minimal, and after finishing work, the seams are masked with a solution of cement and sand. As a rule, the elements are laid out face up, then they turn out beautiful and bright and crafts from bottle caps, photo such works will show you that it does not matter at all what drawing or inscription is applied to the surface of the plastic. The brand inscription will not spoil the overall picture at all, and during operation it will most likely be erased.
For your first DIY bottle cap crafts you should choose the simplest image, it can be any pixel pattern or geometric pattern. With a little practice, understanding the principle of working with this very simple material, you can even make such an unusual reproduction of famous paintings or implement a creative project in an ECO park in your city. You can also use it for decoration, but you can even use the lids as a material for the production of garden furniture, the main advantage of which will be unpretentiousness and long service life.
Bottle cap craft for kids it can be quite simple, and while parents lay out a garden path with mosaics, children can make an original curtain. In each cap, you need to make a hole in the middle, and then string them in a chaotic color sequence on a thick fishing line. A very simple solution for a veranda in the country, because such a curtain is definitely not afraid of rain. If you select elements by color, you can get a "hanging" composition.
Master class crafts from bottle caps can also be used for children's creativity: if you connect your imagination, then the colored cap can turn into a bee, ladybug or a mustachioed cat. To do this, additional elements must be cut out of cardboard and drawn on the surface with colored felt-tip pens. Children can create an unusual underwater world with plastic striped fish with their own hands. Instead of paper, you can also take the remnants of felt, which will allow you to supplement the applications with the missing details.
Plastic or tin lids are a super versatile material for making home decorations, children's crafts, and even garden furniture.
In this article, we have presented 120 inspirational photos and 12 cool deco recycling ideas for plastic and glass bottle caps with tips and tutorials.
Idea 1. Coasters for dishes (+ master class)
Let's start, perhaps, with practice and tell you how to make such pretty coasters for glasses out of ordinary plastic lids.
Materials and tools:
Lids from plastic bottles (for one cup holder you will need 7 caps, and to make a large coaster you will need 28 caps); Fabric in two shades of pink, as well as a piece of fabric in orange or coral; Any glass, jar or lid, with a diameter of about 7 mm; Pencil; Needle and thread; Scissors. 
Instruction:
Step 1. On the existing pieces of fabric, draw 7 circles, circling the tin cover along the contour, and then cut them out. 
Step 2. Now we need to cover each cap with a cloth. This is done simply: walk with large stitches around the entire circumference of the patch, put the lid in the center of the workpiece, then pull the thread and fix the resulting “cover” with a couple of seams. 
Step 3. Now connect all the caps one by one to make a chain. Please note that the connecting seams should be as inconspicuous as possible. Next, fold the resulting chain into a flower (pictured) and fix it by sweeping all the details with each other. Hurray, the first glass holder made of lids is ready! 
Step 4. If you want to make a stand for a teapot, then you just need to connect 4 coasters with each other. 
This collection presents other ideas for coasters made of plastic and tin lids. 
Coasters made from beer corks and molded epoxy resin 
Idea 2. Children's toys (+ master class) Both plastic and tin bottle caps make cool children's toys - robots, transformers, astronauts, iron men and animal figures.
Here is a selection of photo ideas for crafts from plastic bottle caps. 
In this photo you can see the design of the astronaut
Here are examples of crafts made from metal lids. 
And now we will tell you how to make such a rattlesnake from plastic covers with your own hands, which will literally rattle! 
bottle cap craft
Materials and tools:
Caps for bottles of different sizes (in this master class, it took 33 caps to create a snake); Soldering iron or awl; Gold spray paint or ordinary acrylic paint (it takes a little longer to work with, but you can take a child to paint); Leg-split; Hot glue gun; 2 dark beads (for eyes); Brown permanent marker (optional). How to make a rattlesnake out of plastic caps:
Step 1. Gather caps from bottles of different sizes and sort them by size.
Step 2 Using an awl or soldering iron, make a hole in the center of each cover. Of course, this stage of work should be done by the parent. 
Step 3. Spray paint on the lids or paint them with a brush. 
Step 4. Start stringing the caps on the twine in pairs and open side to each other (see photo below) starting with pairs of large caps and ending with pairs of small caps. Finally, when all pairs of caps are strung, make a snake's face - put the smallest cap on the beginning of the workpiece (that is, on the first pair of large caps). Note that the inside of the muzzle lid should face the outside of the first large lid. By the way, this stage can and should be done with the children.
Step 5. Align the snake and tie knots tightly at both ends. On the tail, the tip of the twine must be completely cut off and filled with hot glue (see photo below), and on the muzzle leave a tip of about 1.5 cm.
Step 6. Now we need to make the tongue of the snake. To do this, cut out two identical small and narrow strips of black felt, then cut out a sharp triangle at one end of each of the strips. This stage of work can be entrusted to the child.
Step 7. We glue the two parts of the tongue around the tip of the twine remaining on the muzzle cover (it is advisable to hide the knot between the felt strips).
Step 8. Glue two eye beads.
Step 9. The craft is ready, it remains only to bring it to perfection by drawing small spots on the body of the snake with a marker or paint. 
Idea 3. Wall panels and paintings Since tin and plastic caps from bottles and cans look like mosaic details, you can make wall panels from them and even completely finish the walls. The principle of making wall panels is simple: first, a color scheme of the pattern is drawn up on checkered paper, then the covers are sorted and painted in the right colors and in the right quantity. Next, markings are applied to the base and then the covers are glued to hot glue or superglue according to the scheme.
As a scheme for a panel of covers, you can use a scheme for beading, embroidery or mosaics. 
The following are photo ideas for crafts from beer caps.
Panel of caps from glass bottles 
Panel with plug-in beer caps
When composing panels, plastic covers allow you to play not only with their color, but also with sizes, as well as combinations of covers stacked on top of each other (see photo). 
Picture of plastic caps 
New Year's panel from caps from plastic bottles
And here are examples of exterior decoration and wall decor from plastic bottle caps.
And finally, examples of children's crafts made from plastic covers. 
Idea 4. New Year's crafts (+ master class) Tin and plastic bottle caps make beautiful New Year's crafts: wreaths, mini-trees, garlands, gift tags and, of course, Christmas decorations. 
New Year's crafts from plastic covers 
Christmas tree toy-snowman made of plastic covers 
Christmas crafts from caps
Christmas tree decorations from capsBeer cap gift labelNow we suggest moving on to practice and making crafts from glass bottle caps in the form of such pasta with your own hands. 
Crafts from caps from glass bottles in the form of pasta 
Materials and tools:
Cans of pastel-colored paint (you can also use paint in cans); Golden cord or braid; Hot glue gun; Tin lids (flat lids are best, but slightly bent lids are also suitable); Sequins. 
STEP 1. The first thing you need to do is divide the caps into groups with an even number of corks, and then paint each group with the colors you want. 
Step 2. Once all the corks are dry, start making the first pendant. To do this, tie a small piece of cord into a loop, then glue its base to the inside of the lid and, finally, glue the second lid on top (see photo). Be careful not to put too much glue to avoid getting excess glue between the lids. 
Step 3. This step will require hand speed and accuracy, as hot glue hardens very quickly. Take your blank and apply some glue where the lids meet, then quickly dip it into the glitter jar. Continue covering the center of the pasta with glue and glitter little by little until you're done. Voila! The first pasta is ready, now you just have to finish the rest of the cakes, and then hang them on the Christmas tree. However, these crafts are quite versatile. For example, they can be used to make a garland or fridge magnets, and they can also be packed in a box like real pasta and presented to a sweet lover. 
Idea 5. Ornaments for the garden and vegetable garden By adding a craft from lids with a stick, you will get a cool landscape gardening decor for a summer residence or just a decoration for a flower pot. 
Crafts from covers for the garden 
Crafts from covers for the garden 
Crafts from covers for the garden
Metal lids make great flowers. 
It is very easy to make such flowers with your own hands: the lids are clamped with pliers, then glued to the base (for example, on the lid from under a can), and finally the stem (wooden skewer or other stick) is glued to the craft. If desired, a couple of petals from green caps can be glued to the stem.
Idea 6. Magnets 
These photo frame magnets are made from Nutella lids.
These crafts are made from baby food jar lids.
Idea 7. Jewelry and accessories You can make beautiful necklaces and brooches from plastic covers upholstered with soft but dense fabric.
Plastic bottle cap necklace 
The reverse side of the lid necklace
Tin lids make beautiful earrings, medallions, necklaces, key chains, brooches and even rings.
Have you noticed that in some photos the lids look a little different - they do not have a sharp “crown”, but they have a recess inside? Modifying caps in this way is very easy with just a rubber mallet and a solid platform. Lay the lid face up on the platform, now hit the center of the lid with a hammer with force. 
Next, continue to hit the center of the cork with a hammer, periodically turning it to bend the metal evenly. Finally flip the cork and see what happens. 
Idea 8. Pieces of furniture Almost any piece of furniture can be lined with tin covers. 
Plastic covers can make excellent garden chairs, tables, benches. 
And even boxes for storing things can be made from plastic covers. 
Idea 9. Serving tray Decorating a boring serving tray with lids is very simple: carefully place all the corks on the bottom, then fill them with a layer of epoxy and leave the craft to dry for at least a day. The main thing here is to mix the resin with the hardener according to the manufacturer's instructions (to the nearest gram!) and pour it slowly, avoiding the formation of bubbles. If you want the resin layer to be perfectly clear, use liquid epoxy for decorative, not building work. 
Idea 10. Door curtain If you have accumulated a lot of plastic covers, you can “sew” them into a door curtain for a summer residence. The easiest way is to string caps of different sizes and colors on the threads in a chaotic manner (see photo). 
If you want the curtain to have a pattern, then you need to search the Internet for patterns for making curtains from beads. 
Idea 11. Wall clock Both tin and plastic covers can replace the numbers on the wall clock. All you need is a clock mechanism (can be removed from old clocks), a base, 12 covers and our step by step instructions on how to make a watch yourself.
Here are some photo examples of what a homemade clock from covers can look like. 
Idea 12. Frames for photos or mirrors Beer corks are best suited for decorating mirrors and photo frames.
If the mirror does not have a frame, then it can be decorated with assorted beer caps. 
Those who are fond of creativity always come up with something unusual, interesting that can decorate at least a small piece of the world around. After all, there are so many things that are simply thrown away, polluting nature, but could become material for creativity.
Well, for example, what can be done from lids from all kinds of cans and bottles? It turns out that very, very much is not only interesting and funny, but also useful.
Caps and caps
Plastic is a versatile material that can have a variety of properties. But the one from which food packaging is made is resistant to ultraviolet radiation, food components, has a variety of colors and shades. In addition, everything that will be made from plastic caps will become practically free, because you just need to accumulate the required number of caps by asking friends and acquaintances for help.
Mounting and mounting methods
Plastic is also convenient because elements from it can be fixed in different ways - glue or liquid nails, wire or self-tapping screws, cord and soldering iron. Before assembling crafts from covers into one whole, you need to think about the assembly method. If glue and a glue gun are the best options, then the covers will need to be degreased, otherwise the craft will simply fall apart.
For this work, you can use any solvent at hand. During the pre-treatment of material for creativity, one should not forget about safety measures, because all solvents are volatile harmful substances.
Beautiful house
Many craftsmen try to make their home beautiful not only inside, but also outside. And to make the house elegant? Of course, beautiful panels on the outer walls. Most often, houses are decorated with ornaments, laying them out of covers that are the same size but different in color.
To make the pattern beautiful and neat, you must first make a sketch on paper. You can use ordinary graph paper for drawing with cells of 1 millimeter around the perimeter, marking the points with colored pencils. The lids are fixed with the flat side outward using nails or self-tapping screws. In the same way, you can decorate the fence around the site.
Cover curtain
And what else can you make from covers with your own hands to decorate the house? For a summer cottage, for example, you can make a curtain on the door, which will become the highlight of the summer house. First, measure the height of the doorway and its width, then calculate the number of elements. For the curtain, plastic covers are collected, washed and dried if necessary. Since the curtain will be attached with a cord, there is no need to degrease the material.
For work you will need:
- covers in the amount of 180-200 pieces (for a standard doorway and a curtain a few centimeters above the threshold);
- cord - 30-35 ropes in the height of the curtain plus 5 centimeters for fastening each, it turns out 4-4.5 meters;
- the rail is slightly longer than the length of the doorway;
- small cloves or self-tapping screws for attaching the cords to the rail, if the rail is metal, then you will have to tie the cords on it with knots;
- scheme for the curtain (if there is a desire to make it according to the drawing).
The lids are assembled on a string in turn. In each of them, it is necessary to make two holes with an awl or a nail heated on fire so that the cord runs in the middle. The bottom cap is fastened with a knot or a decorative element - beads, buttons or something similar. All subsequent elements of one curtain thread rely on it.
Each assembled cord is attached to the rail in the order that corresponds to the diagram. You can immediately attach the finished curtain elements from plastic covers to the lintel - on nails or self-tapping screws. But the rail can be removed for the winter, and in the spring the country house can be decorated again with a curtain of plastic covers.
Beautiful garden path
Leaving a beautifully decorated house, you want to walk along a beautiful path. Let's take a look at what can be done from covers for your site? Of course, the garden path. The covers do not need to be washed and degreased, they are randomly or in accordance with the scheme simply recessed flat side up on a garden path made of a mixture of sand and cement. You can, of course, use ordinary clay, but such a path will last until the first heavy rain - it will simply wash away.
Summer kitchen chair
We continue to decorate the garden plot. What can be done from lids so that it is not only beautiful, but also functional? You can arrange a table and chairs for the summer terrace. Basically, this method is used to decorate household items that have lost their appearance. In this case, the covers are attached to the base, and then the space between them must be filled with special substances - mastic, epoxy, putty.
But you can take the base of an old chair, even a folding one, collect the required number of lids from plastic containers, draw up a diagram of their placement. Then each cover should be pulled over the wire. This will form the seat. Of course, the metal wire must be strong enough to support the weight of the human body. You can use not it, but a strong nylon cord. Covers are mounted on it using 4 holes - they will be, as it were, intersections of cells formed by stretched cords.
Plot decor
Plastic covers, bright and colorful, will serve as a good basis for creating all kinds of decorative elements in the open air. They can be voluminous when assembled into a three-dimensional structure, or they can be attached to some kind of base for a flat decoration. What can be done from covers to decorate the space around the house or in the city yard?
For example, you can construct a tower. Covers are assembled using a construction stapler. For reliability, they are glued with the same epoxy. It will probably be impossible to climb on such structures, but they will perfectly decorate the site.
Supply for dishes
How to make a stand for dishes from lids - a teapot, a cup? Very simple. First you need to decide what size stand you need, calculate the number of covers needed for this. Moreover, they can be fixed in rows, or you can get a "honeycomb" pattern. Next, you need to arrange the elements according to the diagram, previously drawn on paper. It is more convenient to fasten the covers with a construction gun. The teeth of the brackets inside the covers must be bent so as not to get hurt about them.
Planter for flowers and basket
If the lids from plastic containers are fastened not with ribs, but flat with respect to each other, then they can be used to assemble voluminous objects that hold their shape well - a planter for a flower pot, a decorative bucket for garbage or a basket for toys or linen. First, the bottom is laid out - the covers are attached to the sides with a wire or a stapler. It is not very reasonable to use glue, since plastic elements can crumble during operation.
When the bottom of the desired size is ready, the lids are placed on top of each other in a checkerboard pattern, reinforced with glue and a stapler or passing a long, strong wire into pre-prepared holes in the center of the lids. Such an element of decor will become a real highlight of the house.
mosaic panel
Lids can decorate not only a garden house. In cities, craftsmen also know how to use these elements. What can be done with lids? For example, decorate a balcony railing with a colored ornament. To do this, the size of the fence is measured, a diagram of a pattern or pattern is built on it, covers are assembled, and then a mosaic panel is laid out using wire or glue. To make a kitchen apron from covers, you need to know that they should be fixed in a binder base - on plaster or plaster, followed by grouting and coating with a protective material such as varnish or acrylic.
Fridge magnets and more
Crafts from caps can be an educational activity that is interesting for children. Lids are safe even for babies, because they are made of food-grade plastic, have a rounded shape, but at the same time they can be large enough so that a child cannot swallow them. Many fun crafts from this junk material can be made for and with children. For example, fridge magnets. As a magnetic element, it is best to use a special cloth - it is thin, easily cut with scissors, with ordinary glue it can be fixed on a plastic cover.
The magnet is glued on the outside, a children's drawing or small photographs are placed inside. The alphabet on the lids with magnets will keep the child busy learning the alphabet while mom cooks. You can make wonderful stamps out of plastic covers if you buy them in needlework stores or cut out stencils of various figures or letters from felt yourself. Such crafts will be cute in and of themselves, and will be useful to the child for creative work.
Robotics
And how many toys can be created using this wonderful material! Here's how to make a robot out of caps? It turns out it's not difficult at all. You need to prepare 25 colored caps for drinks and a long cord. First, the legs are assembled: four covers are placed one on top of the other, fastened with a cord in the center. The hand is assembled with the edge of the lid turned upside down, and then three pieces are placed one on top of the other, fastened in the center with a rope. Now the body - we put two covers with ribs, we place one flat one between them.
You need two such structures - a pelvis and shoulders, between them one lid is installed with an edge, and the upper part "sits" on it, covering almost half. All parts are assembled together with cords, fastening knots are hidden under the covers turned upside down. However, this is the most primitive design of the robot, because a huge number of such toys can be made using additional elements - plastic boxes, chocolate egg packaging, mosaics.
As it turned out, plastic bottle caps are an excellent material for creativity. They are bright, different colors, safe for children, easy to assemble with the help of improvised devices. And what wonderful things!
Surely in every home the question often arises of what to do with the accumulated plastic bottles and caps from them. Many people simply throw them away without even realizing how much use can be made from this beautiful handmade material. It has long been no secret to anyone that plastic bottles can be used to make decorations for the garden. On our website, you can familiarize yourself with. But how to use plastic bottle caps to create something useful out of them, we will tell you in this article.
Crafts from caps from plastic bottles with children and for children
Plastic bottle caps are very colorful items that you can find at least three uses to make a craft for your child or with him.
magnets
From plastic covers you can make beautiful magnets on the refrigerator or on the board in the children's room. For this you will need the following material:
- As many colorful caps as possible;
- Small magnets (you will need to purchase them);
- Double-sided tape or quick-drying glue (ideally, you need to use a glue gun);
- Medical alcohol (for degreasing lid surfaces);
- Felt pens, colored paper, pencil and scissors.
From this set of materials you can make an alphabet on magnets for your baby, which will look like this, as a result
What should be the sequence of your actions:
- Prepare all corks for work - degrease them with medical alcohol from all sides. This is necessary so that it is easy to glue the desired material to the surfaces of the covers, in our case this applies to colored paper and magnets.
- Now glue the magnet to the outside of the lid using double-sided tape or quick-drying glue. Of course, we recommend using glue, which will securely attach the magnet to the lid.
- Cut out circles from colored paper that will fit the lids in size and glue them to the inside of the cork. Then, on these circles, draw a beautiful letter of the alphabet or a mathematical symbol with a felt-tip pen. By the way, instead of the usual drawn letter or number, for example, you can use a cut out symbol from decorative paper, and stick it in exactly the same way. You do not have to spend money to buy such educational toys for your child.
We note right away that magnets can not even be glued to the lids. Their intended purpose will not change, just instead of folding words and mathematical examples on the refrigerator, the child will be able to do all this at his desk.
Lid magnets can also be made in a different format - in the form of funny fruits or emoticons. To make them, you will need thin wire, beads, quick-drying glue and green knitting thread.
To make a cherry like the one in the picture, you need to process the lid in the same way as for the alphabet, then glue white beads to it - these will be the eyes of the cherry. Pupils can be drawn with a felt-tip pen or cut out small circles from colored paper and carefully glue them to the beads. It remains to make only stems and leaves. To do this, take a small piece of wire and wrap it with green thread, and then twist it so that it looks like a stem with a leaf. To attach the resulting element to the lid, you can make a small hole in it, pass the wire through it and twist it. As you can see, nothing complicated.
It’s even easier to make a smiley face - attach the beads as an eye in the same way to the processed cover, and then make different smiles from the prepared small pieces of wire and attach them to the corks with quick-drying glue.
There is another very original idea for creating magnets from lids. They will represent the faces of cartoon characters or any animals, birds or fish.
To make such products, in addition to all the materials mentioned above, you will need to purchase thick colored cardboard. It will be easy for you to make a muzzle, especially since, using the example of a smiley, we have already told what to do. There is another nuance here. You will need to attach the magnet itself not to the lid, as in previous cases, but to the cardboard on which you will glue the resulting cork product.
Toys
Next group plastic lid craft for those who are ready to work hard, but to make a real work of art for their baby. If you have a lot of corks stored somewhere in a bag, urgently take them out and create beauty, for example:
These are ordinary voluminous applications on paper. To make them, you will need the following material:
- Colored cardboard;
- Covers;
- Fast drying adhesive;
- Beads or beads;
- Stationery: scissors, pencil.
From these simple materials, which can certainly be found in the portfolio of any student, you will make an original craft. To do this, you need to follow this procedure:
- Cut out the base for the future application from colored cardboard - it can be any geometric figure, flower, sun, and so on. In the photo, the author immediately made a base from colored cardboard in the form of characters - a sheep, a hedgehog and a doll.
- We prepare the covers (we treat them with medical alcohol), if necessary, we glue them together with quick-drying glue. You can see an example in the picture depicting a sheep and a chrysalis.
- We fasten the covers to the base with glue, and then we decorate the application completely. Here you can use any decor materials that you have. In this case, the main thing is to show imagination.
Master class on how to make a snake
To make such a bright and beautiful toy, you will need:
- Multi-colored plastic lids (preferably the same size and shape) and one plastic egg from a chocolate kinder surprise;
- Strong rope;
- Screwdriver and awl (you can also use a screwdriver).
Having prepared everything you need, you can literally make a fascinating little thing for your child in just 30 minutes. This will especially help you out if you came to nature, and left the bag with toys at home. How to make such a snake:
- Pierce the center of each lid with an awl. In order not to get hurt, you can heat the tip of the awl well. The high temperature will melt the plastic cover where it touches the awl and it will be easy for you to pierce it.
- Divide the plastic egg from the kinder into two parts. Use one to create the snake's head and the other to complete its tail.
- String prepared covers on a rope, pressing tightly one to the other.
- The ends of the rope on all sides must be tied in a knot. From the knot that is formed from the side of the head, you can make a snake's tongue, and carefully trim the other.
- On the head of the snake, you need to either draw eyes and a nose, or cut it all out of colored paper and glue it with quick-drying glue.
Master class on how to make a robot
As a base for this toy, you will need to use a thick wire to make the product stable. In addition to the wire, it goes without saying that you will need caps (about 20 pieces, but more is better), an awl and an indelible marker.
To make such a robot, using the same technology that we recommended you to create a snake, pierce each cover in the middle with a red-hot awl or nail. We recommend that you immediately prepare the parts of the robot's body in a position in which they will then be attached to each other. Each detail is drawn up separately. When they become one, you can paint the resulting robot with a marker or glue the necessary additional elements to it. For example, as in the picture, you can make fingers (using scraps from covers).
Master class on how to make little men
To make such a toy, you can use all the materials that were offered to create a snake and a robot. Your little men can be mobile (if you string caps on a rope) or motionless, but stable (if you string caps on a wire). The manufacturing technology is no different from the previous ones. The only thing you may need in addition is plastic eggs from kinder surprises of different colors. If you don’t have them, it’s not necessary to buy sweets to get the right material, you can replace it with something else - matchboxes, elements from your child’s old plastic toys.
Mosaic
To decorate a place where your child often spends time in the yard, you can make a beautiful mosaic of plastic covers in the form of fairy-tale heroes, cartoon characters. If you can draw, the task is much easier for you. You will only make a contour, and then completely cover it with plastic bottle caps, gluing them with a glue gun. By the way, you don’t have to lay out the lids according to a certain color, especially since it’s not so easy to assemble plain ones in the right amount. You simply then paint the lids with a spray can or regular paint in the desired color.
However, experienced needlewomen recommend not putting lids on glue, as this is not a very reliable way to save work in the open. They recommend that you first draw your chosen pattern on the surface on which the mosaic will be placed. Then, to the contours of this pattern at the same distance from each other, make marks - nail. All caps from plastic bottles will need to be strung on threads using the technology already known to you, and then, in accordance with the pattern, attach them to the wall, tying each end of the threads to nails on one side and the other. You can immediately screw all the covers to the wall using self-tapping screws.
Crafts from covers from plastic bottles to home interiors
It may seem strange to you to use plastic covers in your home interior, because they are too bright and in many cases do not fit into the overall design of your house or apartment. Yes, but you can make a lot of original items for a summer residence, where any product, no matter what it is made of, will always come in handy. We offer you to make the following household items from plastic bottle caps:
door curtains
To create such an original curtain, you need to collect a lot of covers. All of them need to be pierced with an awl, strung on a fishing line with a length corresponding to the height of your doorway, and then tightly attached one after another to a piece of wood, which will play the role of a kind of cornice. This cornice will be easy and simple for you to nail to the top of the doorway with nails. You can use self-tapping screws. Or you can take a real cornice, and attach a hook to each “garland” of covers, for which it will be attached to the cornice. Then you will be able to fully use such curtains, being able to move them in different directions if necessary.
Watch
If you still have a mechanism from an old clock, you can give it a modern look, which is now very popular in home interiors. With the help of multi-colored plastic caps and quick-drying glue, you can create a design like in the photo. It's very simple: by choosing the color of the covers, you glue them together so that you get a pattern around the clock mechanism.
Flower pots and vases
A very simple technique for making such products is that on a finished base, whether it is a flower pot or a vase, you glue the lids with the inside. You can make a picture of traffic jams along the way or create some kind of abstraction. As a result, you will get a voluminous bright decor of already old and faded household items.
baskets
To create a basket of this design, you need to make 4 holes in plastic lids. Then, in each hole, you need to thread the wire so that you can connect several covers together. As a result, you will get a voluminous, but small basket for various household items. His handles in the photo are wire, but you can come up with something original to decorate them.
This version of the lid basket will require your patience and special skill. Despite the fact that only two basic materials are needed to make it - these are lids and quick-drying glue, you will have to work on it a lot to make a beautiful product. Here it is important to evenly line up and glue each layer of the basket together so that everything looks very organic as a whole. Such a basket will look very impressive in white, but you can use any other covers, even multi-colored ones. Here, for example, as in the photo below. The author of this masterpiece chose to make a trash can out of the lids. But the brightness of such a product is very eye-catching, so you should use it for some other purpose.
Rugs
From plastic covers, you can create an excellent massage mat of any shape and even with a pattern, which can be turned into a luxurious stand for hot dishes. To do this, you need to glue the lids edge to edge with a glue gun. If you turn the mat with a masonry surface on the floor, then you will have an excellent tool for massaging your feet, if you turn it the other way around, then a reliable stand.
Chandeliers
Of the many options for creating chandeliers from plastic covers, we will offer you two of the simplest and at the same time original.
Option number 1
What you need:
- plastic lids;
- Thick cardboard;
- Wire;
- Fast drying adhesive.
How to do:
- Cut out several rectangles from cardboard, glue them together to make one long paper strip.
- Make a circle out of wire, which can be any diameter. It will depend on what size the ceiling of your future chandelier should be.
- Now wrap the wire in a circle with a cardboard strip.
- Having fixed the base, you can start pasting it with plastic covers.
Option number 2
What you need: everything is the same as for the previous product, but instead of wire it is better to use a nylon thread and prepare old beads for a change.
How to make:
- Pierce all the covers so that each has two punctures on the edge (the punctures should be parallel to each other).
- Then string the lids on a thread, alternating them with beads. You should get at least 10-15 such "garlands".
- Cut out a small circle from cardboard. Make as many holes along its edges as you have garlands.
- Attach one garland to each hole (just tie them).
Furniture
All the old furniture in your home can be given new life by decorating them with plastic covers. For example, you can update an old table top in this way. You need to lay out all your covers in any sequence around its entire perimeter with a smooth surface up. When done, fill them with acrylic resin. When it dries, you will have a beautiful, bright and smooth table.
You can not fill the surface with acrylic, but fix the covers on the surface of the table or old chairs with quick-drying glue. It will also turn out well, for example, as in the photo below:
yard
This category of products requires a special talent from the needleworker, because, in addition to the ability to create beautiful things from unnecessary things, such as plastic covers, for example, he will also have to learn how to knead the cement mortar, if he did not know how before. When will such a talent come in handy? When you decide to decorate the facade of your house with plastic bottle caps in the form of an unusual mosaic.
Perhaps you will like this idea for decorating your balcony. The manufacturing technique is the same as that of a mosaic panel.
From plastic covers you can make a bright path in the yard, which will become an unusual decoration.
In other words, there are a lot of options where plastic bottle caps can be used. If your home is quickly stockpiling these wonderful craft items, then try to make the most of them. Create beauty from simple things - be original!