Creating postcards with themed landscapes is always an interesting activity, since here you can realize your original ideas to the maximum. Autumn crafts using the quilling technique can have different subjects: golden forest, autumn leaves, individual trees and flowers, and many others.

Let us describe a quilling master class on the theme of autumn using the example of making an autumn bouquet. We will also look at how to make a rowan branch and a beautiful maple leaf.

Master class on creating an autumn bouquet

The composition is simple to perform and accessible even for beginners. Crafts on the theme of autumn quilling are always replete with different shades of yellow, red and orange.

In order to make a bouquet with your own hands, you can take the following materials:

• colored paper (it is better to take a special one for quilling);
• quilling stick;
• glue;
• scissors;
• simple pencil;
• special floral wire or solid green straw.

A detailed description of the instructions allows you to quickly understand how to make different elements of the picture and connect them together. You need to follow these steps step by step:

By collecting several flowers in one bouquet and placing them in a beautiful base, you can get a real autumn quilling style.

The most difficult element of the master class, which can cause some difficulties for beginners, is making buds. To make them as neat as possible, it is better to twist them 2-3 times and carefully fix the core with glue.

Autumn maple leaf

Another original MK describes the making of a maple leaf. This is a traditional plot for autumn in the quilling style, because this time of year is most often associated with fallen leaves of red and yellow shades.

For this you will need:

• quilling stick;
• glue;
• quilling paper;
• colored cardboard;
• scissors and hole punch.

Before you start work, you need to decide on the general scheme of the picture, on the basis of which to make quillings of different shapes.

Various parts are made according to 4 forms shown in the diagram.

Using the quilling technique, you can make many scenes on the theme of autumn.

Several autumn ideas in videos

Quilling “Autumn”: step-by-step master class on making an autumn composition using the quilling technique.

Quilling: autumn

This wonderful autumn composition using the quilling technique was sent to our competition by Daria Andreevna Lyutova and her daughter Alexandra from Moscow. Sasha is now 3 years 10 months old. They called their composition “Autumn Pond”. They made the craft a year ago, when my daughter was 2 years and 10 months old, but she took a very active part.

How to make quilling on the theme of Autumn: autumn pond

Tools and materials

You will need strips of colored paper for quilling in different colors, glue, quilling tools, wire, floral tape, glue, plaster, toothpicks.

Quilling Autumn: first stage. Making a tree with leaves

We start with the most labor-intensive stage - making the tree.

Step 1. Make teardrop-shaped leaves.

First you need to wind the leaves for the autumn tree using the quilling technique. Many teardrop elements are manufactured.

In order for two colors to be combined in a leaf, you need to glue half of the strip together and start from the edge whose color should be on the inside.

Alexandra helped her mother wind the strips and glue their ends.

Step 2. Making the trunk and branches of the tree.

To do this, you need to cut a wire (copper cable for wiring), in the composition in the photo a wire with a cross-section of about 2 mm was used. This is the basis of the branches (and trunk) of the tree.

The length of the wire is equal to the trunk + crown.

Each wire must be wrapped along its entire length with green tape (floral tape). Coat each leaf in the place of gluing with glue (Daria and Alexandra used glue for a second, but then some of the leaves flew off) and press firmly to the prepared branch.

My editor's note: If you need to ensure a particularly strong and at the same time transparent connection, then it is better to use a glue gun. Under no circumstances should you use second glue or Moment glue in a room where children are present, as they are toxic. After work, ventilate the room.

When you have collected a sufficient number of branches, you need to put them all together and wrap this entire bunch tightly with tape to the crown area to form a trunk.

After this, we bend the wire, straighten the branches, point them in different directions, and form a crown.

Quilling “Autumn”: second stage

Step 3. When the tree is ready, do base for crafts. To do this, you need to select a box with a bottom of the required area. The bottom area determines the size of the base for the entire work. We can immediately estimate in what places we need to place the tree, and what size pond we will need.

Cover the box with a plastic bag. We didn't worry too much about straightening the cellophane, because... The folds add an interesting texture to our base. We apply a not very liquid gypsum solution and pour it into our mold.

We make the base of the required height, but not very thin so that it does not break in the future.

When the gypsum begins to thicken a little to the desired state - so that something can be formed - you need to make a recess for the pond and “plant” the tree in the intended place.

We are waiting for the plaster to harden.

After this, we cover our base with acrylic paint. We chose green colors because... It's early autumn here. The trees are already turning yellow, and the grass is still green, although withered.

Step 4. Making water. You can also immediately tint the shore of the pond (we used brown paint and tried to imitate clay, although, in my opinion, it was not very successful). And its bottom is painted blue.

In order to make water, we took beads of blue and blue shades and added some green beads. Everything was mixed with PVA glue and this mass was placed in our pond. When the PVA dries, it will not be visible.

Alexandra believes that water made from microbeads in the desired shades will look very good, but it will be much more expensive.

Step 5. Make grass next to the pond. Let the paint dry, coat the entire area where the grass is planned with PVA glue and sprinkle with dried dill - this is our grass.

Step 6. Making a path to the pond. We made the path to the pond from millet. We coated the desired area with PVA base and poured in the cereal. Here you can also take beads or microbeads.

Step 7. Making a bench. The bench is made of beaded wire – the sides and back, and the seat is made of toothpicks.

How to make a bench for composition:

- a sketch of the sides and back is drawn,

- the wire is bent along it using pliers.

Here are the test side panels:

You need to cut off the sharp ends of the toothpicks, and then glue the sticks together with second glue.

My daughter helped cover the seat with gold paint.

We twist the sides and back and fasten them together, and glue the seat to them with a heat gun.

The finished bench needs to be glued to the base with second glue.

Step 8. Making the bridge. The bridges are also made from toothpicks cut and glued together with second glue. The entire structure is glued to the base.

Step 9. Making reeds. For reeds you need to take tape tapes of two colors (green and brown) and thin wire as a base.

The wire is wrapped with green tape. A brown ribbon is screwed onto the top to imitate reeds.

In order to make leaves, you need to cut the green tape across, but not all the way (we make the cuts close so that the leaves turn out thin).

We glue the leaves at the bottom of the reed blank.

We make the required number of reed stems, collect them in a bunch and wrap them at the very bottom with green tape so that the bush does not fall apart. We straighten the branches and glue the bush to the water with instant glue.

Daria writes: “When we completed the composition, it seemed to us that one corner was empty, and so we glued pebbles there. Several leaves can be placed on the ground and water, as if they had already begun to crumble. The remaining elements of the landscape depend on your imagination! Good luck! Create with your children and have fun!”

Read more about autumn-themed quilling for children in the article:

Get a NEW FREE AUDIO COURSE WITH GAME APPLICATION

"Speech development from 0 to 7 years: what is important to know and what to do. Cheat sheet for parents"

Click on or on the course cover below to free subscription

Quilling is a technique for creating three-dimensional compositions using modules made from twisted pieces of paper. The term comes from the English word quill - “bird feather”. Quilling for children is a great way to develop artistic abilities, fine motor skills, perseverance and diligence. This is an ideal craft activity for preschoolers because it is safe and easy to learn. Quilling classes for children are practiced in many institutions as a group, but parents are quite capable of teaching a little creator this technique at home.

Quilling master class for beginner children 4-5 years old

It is permissible for children to begin learning to work in the quilling technique when they reach the age of 4-5 years. Under the strict guidance of their parents, kids can create simple applications, cards and other crafts that will make a good gift or interior decoration. To create a simple flower arrangement with your child, get the following items:

double-sided colored paper;

PVA glue or pencil;

• thin stick;

  basis for the picture;

  tassel

The execution process includes the following steps:

Using a thin stick, colored paper is first rolled into half a sheet of paper and glued, then to the end and glued again.

The tubes are cut crosswise into narrow strips so that the finished elements resemble petals and leaves.

We are preparing the basis for work. Thick colored cardboard is perfect for these purposes.

Based on this we make a sketch of the composition.

Then the child himself chooses the elements to work with, laying them out on a base without glue.

Having made sure that the composition looks harmonious, we “plant” the modules with glue.

Glade of flowers

The following instructions will teach you and your child how to create a composition in the form of a meadow of flowers using the quilling technique. This is a simple job, and you can teach it even to a child aged 3-4 years. To do this you will need the following tools:

colored paper;

material for the base (thick green cardboard is perfect);

felt-tip pens or pencils;

PVA glue;

• tube or round pencil.

Here is a sample plan for creating beauty with your own hands:

We begin preparing the modules by cutting colored paper into strips 5-7 mm wide.

We wind the strips onto a pencil, felt-tip pen or tube.

We give the required size to the resulting spirals.

We prepare the required number of multi-colored modules according to the planned plot.

We lay out the elements in the form of stems, petals and leaves on the base.

Carefully glue the modules.

You can complete some details or use regular appliqué techniques.

Autumn composition

Autumn is a time of riot of colors that can inspire little creators to create real masterpieces with their own hands. Let's try to create a picturesque autumn composition for children using the quilling technique. Standard set of tools:

colored paper (yellow, red, green shades are preferred);

vase stencil;

simple pencil;

PVA glue;

• toothpick.

A simple execution scheme will help you and your baby work:

Select a picture and trace it with a simple pencil.


Using a stencil, cut out a paper vase of the selected shade.


We prepare the modules by cutting colored paper into thin strips and winding them with a toothpick.

Draw the branches using a felt-tip pen.


We glue the prepared twisted elements onto the drawing so that we get a bright flower arrangement.


The finished work is framed.


Step-by-step instructions for crafts for children 6-7 years old

For children aged 6-7 years, learning quilling will be interesting and have undoubted benefits. Let's try to collect a flower together with the child. For the lesson you will need:

double-sided colored paper of two types - green and orange;

cocktail straws;

• PVA glue;

  stationery knife;

Preparing modules is the most critical stage. It is performed as follows:

Using scissors, the paper is cut into strips about 50 mm wide.

Using an awl, the strips are twisted into tight coils, the ends of which are secured with glue.

The center of the coil is pressed with a toothpick, as a result of which it should take the shape of a cone.

Please note that each cone must be the same length. Make sure that the child performs all the simplest actions without your help. When all the modules are ready, we proceed to assembling the finished composition:

It is necessary to glue the cones together so that it looks like a sphere.

Leave a small hole for the flower stem.

Cut a strip of about 1.5-2 cm thick from green paper.

We cover the straw with green paper in a spiral.

We cut a strip of green paper 5 cm thick into a fringe and glue it in a spiral manner.

We connect the flower with the stem using PVA glue.

Butterfly using quilling technique

We offer you a step-by-step description of creating a butterfly using the quilling technique. Making such a craft is more difficult than a standard applique, but the work itself can be used not just as a decoration, but also as a toy. For production we will need:

colored paper;

a set of sewing needles;

board for work;

• PVA glue;

  glue brush.

Let's get started, going through the scheme gradually, step by step:

Making the wings: cut three strips of paper of different lengths, being sure to choose matching shades.

We glue strips from short to long.

We twist them so that the shortest one is inside.

We seal the free end from the outside.

We insert the circles into the slits of the quilling board and unscrew them.

Using sewing needles, press the center of the circle to one side and glue the stripes in this place.

We make the body: we twist two circles, form cones, which we glue together.

We connect all the elements, complementing the composition with tendrils of thin spiral-twisted strips

Snowflake

Using the art of forming modular compositions using rolled paper, you can create incredibly beautiful snowflakes. They will be the perfect home decoration for the New Year holidays. Let's look at the instructions for creating a snowflake using this technique. For this you will need:

white paper (ordinary office paper will do);

PVA glue;

toothpick;

• thin brush for glue.

This craft is difficult to complete and will require the participation of an adult:

We cut the paper into thin strips.

We twist them with a toothpick.

We open the resulting ring a little to obtain the desired diameter.

Glue the free outer tip.

We clamp the ring on opposite sides.

We prepare 12 similar elements and glue them together in the shape of a flower.

We twist the strips into tight rings and secure them with glue.

Glue the rings between the petals of the snowflake.

We make 6 paper curls and glue two at a time at the distance between the petals.

Glue a simple tight ring into the center of the snowflake.

Rowan branch

A rowan branch is a simple and effective composition that you can attach to a standard sheet of cardboard or a beautiful openwork napkin. To make it you will need:

double-sided colored paper in black, green and red or terracotta;

basis for the composition (colored cardboard, openwork paper napkin, etc.);

toothpick;

Let's get started by laying everything out on the table in a convenient order:

We make berries: cut red or terracotta paper into thin strips and twist them into tight rings using a toothpick, securing the ends with glue.

We make leaves: we twist rings from green stripes, squeeze them from both edges, giving the shape of a leaf.

We cut out a branch of the required thickness from dark paper and glue it to the base.

We place modules in the form of leaves along the branch.

At the end of the branch we place the berries in the form of a lush bunch.

Animal diagrams for creating paper crafts

Using the diagrams presented below, you and your child will be able to create compositions in the form of animals and birds using the quilling technique. It could be a funny chicken, hare, hedgehog and other fauna. Detailed instructions will allow you to avoid mistakes when performing work, and your child will more actively explore the animal world and develop creative abilities.

How to make a three-dimensional toy from corrugated cardboard

Corrugated cardboard is a convenient, versatile and easy-to-work material. It makes it easy to create impressive DIY crafts. We present to your attention a video tutorial that contains step-by-step instructions for creating a three-dimensional toy using corrugated cardboard.

Autumn forest. Master class painting with step by step photos

Nikolskaya Lyudmila Gennadievna, MDOBU "Novoarbansky kindergarten "Rainbow". Republic of Mari El, Medvedevsky district, Novy village.
Purpose: The painting can be used to decorate a room, as a gift for a holiday, and also to participate in competitions and exhibitions of arts and crafts.
Description of work: master class for teachers, parents, children of senior preschool age together with an adult and children of primary and secondary school age.
Target: Create a picture from paper.
Tasks:
- develop fine motor skills, creative imagination, accuracy when working with glue;
- learn to combine paper, different colors, create a picture.
- cultivate independence, interest in work, and the ability to finish what you start.
Material for work: Colored paper, glue, scissors, photo frame, toothpick, corks.

Progress of the master class:
Green and blue paper was used for the background of the painting. Glue the background to the photo frame.

For the birch trunk, you will need white and black paper.
Roll a sheet of paper into strips. Glue the edge of the sheet with glue.

Cut the strip into pieces 4 - 5 mm wide.

Cut out the trunk. And glue the parts to it. We assemble the trunk like a puzzle.

Glue the finished trunks to the picture.

Cut out leaves from different colors of paper.

We glue the finished leaves onto the picture to the trunks of birch trees.

We make mushrooms from a plastic cork. The cork needs to be cut in half. Cut strips of red and brown crepe paper. Glue the paper to the top of the cork. You get mushroom caps.

Glue the mushrooms to the picture.

For bushes with berries, you will need green and red paper. We cut out the branches and glue them together in the form of a bush. We roll “berries” into balls from red paper and glue them to the bushes.

We glue the bushes to the picture.

Add mushrooms made using the quilling technique. We insert a strip of paper into the cut of the toothpick and twist it. It turns out to be a circle. We make a mushroom stem and a hat from a circle.

Herb for mushrooms.

Cut out small leaves and glue “leaf fall”

Master class on making panels using the quilling technique “September Stars”

Author: Yulia Konstantinovna Vyaltseva, teacher at the Bureysky Children's Institution, No. 1 "Gnezdyshko", Bureysky district, Amur region.
The master class is intended for lovers and connoisseurs of quilling, for very hardworking and diligent people: teachers, parents, high school students.
Purpose: interior decoration, gift option for any holiday or birthday.
Target. Making panels using the quilling technique with your own hands.
Tasks.
1. Learn to perform the basic elements of the quilling technique and make a branch of a perennial aster from them.
2. Develop individual creative abilities, independence, and hard work.
3. Develop the ability to create a composition.
4. Encourage the ability to embody one’s ideas and aesthetic experiences in artistic form.
5. Develop fine motor skills of the hands and eye.
6. Cultivate courage, confidence, initiative in the experimental development of new materials and ways of working with them.

September, October, frost... No matter how anyone calls these sweet flowers, everyone knows what we are talking about - perennial small-flowered asters, indispensable participants in autumn flower parades. The ability of September flowers to bloom until late autumn, the variety of colors and ease of care make them welcome guests in the autumn garden. The range of perennial asters is very large.
Aster– translated from Greek means “star”.
An ancient legend says that the aster grew from a speck of dust that fell from a star. Already in Ancient Greece, people were familiar with the constellation Virgo, which was associated with the goddess of love Aphrodite. According to ancient Greek myth, the aster arose from cosmic dust when the Virgin looked from the sky and cried. For the ancient Greeks, the aster symbolized love.
There is a belief that if you stand among the asters at night and listen carefully, you can hear a light whisper: these are the asters having an endless conversation with their sister stars.

September color...
As a gift to us - September
Delicate flowers.

Distant stars...
Gives a bright dawn
Autumn dreams...

Impeccable flowers
Smile at us

Sharing your dreams
Half with us.
Svetlana Ugryumova
Dear visitors of the “Entertainment Pantry”! I bring to your attention a master class on making panels using the quilling technique “September Stars”.
For work we will need the following materials:
killing paper 3mm wide, lilac, yellow, green; paper 10 mm wide, lilac; a strip of 20 mm green paper for making castings;
quilling scissors, cotton swab, wire cutters, toothpick, thick needle, PVA glue;
thin floral green wire.

So let's get to work.

1. To make a flower, cut strips of 3mm yellow and 10mm lilac in half.

2. Cut the lilac strip into small “noodles”.

3. Let's make a lot of these blanks.

4. Glue the prepared lilac and yellow strips together.

5. Using a toothpick, roll the strips into a roll.

6. Fill it with PVA glue for strength and leave until completely dry.

7. For half-blooming flowers, twist lilac strips cut into “noodles” into rolls, also fill them with glue and leave until dry.

8. Now let’s make a receptacle; all parts of the flower are attached to it. To do this, twist 3mm green strips into tight rolls.

9. Give them an elongated shape using a cotton swab and fill them with glue. Let's leave it for a while.

10. While the glue is not completely dry, use wire cutters to cut the floral wire into three parts. We pass the wire through the receptacle and bend the tip into a loop. Pull the wire all the way down.

11. Let's make a lot of these parts.

12. Let's start assembling the September flower. Cut the green 3mm strip into 8 pieces. We coat one short strip with glue, place the lilac blank and the receptacle on it, connecting them together, and carefully glue them together.

13. This way we get a lot of almost finished flowers.

14. Let's fluff up the September flower: first, open the bottom row of petals, then the middle one, and finally the inner one so that the middle becomes visible.

15. To obtain half-bloomed flowers, glue lilac blanks without centers into the finished receptacles.

16. Let's fluff them up.

17. Let's make buds. We twist tight rolls from 3mm lilac strips, give them a convex shape with a cotton swab, fill them with glue, and leave them until completely dry.

18. Let's assemble the buds from the receptacle into a single whole using a short strip and glue.

19. Next, cut out many narrow leaves from the 20mm green strip and bend them with scissors.

20. Glue the leaves to the pedicels. September flowers are ready.

21.

Now let's design the frame.

For this we need:

* A-4 format frame;
* some light wallpaper, white cardboard, scissors, pencil, ruler, PVA glue.

22. Remove the glass from the frame and paste wallpaper onto the base. Draw a “window” on the cardboard, retreating 3 cm on each side.

23. Cut out the edging (passe-partout), glue it, and insert it into the frame.

24. Let's start assembling the panel. Let's twist together a bud, half-opened and full-blown flowers.

25. Add 2-3 more flowers.

26. Let's make several of these mini-bouquets.

27. Now we begin to place the bouquets in the frame, arranging the composition to our liking.

28. Add twig by twig, gluing it with universal glue or attaching it to the background with stationery pins.

29. Cut long stems with pliers.

30. At the bottom of the panel, we turn the bouquets up with their stems, glue them, and straighten the flowers upwards.